Large VHD being detected as 136.8GB in VM

I created a 600GB dynamic VHD and am using clonezilla to migrate my data to it.  In clonezilla it only sees the VHD as 136.8GB so I cannot restore my data to it.  Is this just a limitation of dynamic VHDs?

Hi,
First of all, Gentoo is not a supported Linux guest operating system on Hyper-V. For more information, you can refer to:
Virtualization with Hyper-V: Supported Guest Operating Systems
http://www.microsoft.com/windowsserver2008/en/us/hyperv-supported-guest-os.aspx
By the way, what did you mean by the description “am having the same problem now with it”? Please elaborate it.
You may try to install Linux Integration Services into the VM to see whether you get the same issue.
Simplified instructions for installing the Linux Integration Components into Hyper-V virtual machines
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/0d2c5fa8-682c-4f5d-9fe7-388dd80a7e06
In addition, you can check the following post.
Hyper-V IDE maximum size?
http://social.technet.microsoft.com/Forums/en/winserverhyperv/thread/f5784096-808b-4a66-9bfd-fecb0a0946cc
Best Regards,
Vincent Hu

Similar Messages

  • My Ipod Nano 5th generation is not being detected by Widows and Itunes. I have tried everything based on the trouble shooting tips outlined. Has anyone had this situation before? How was it resolved. My Ipod is just out of warrenty

    Have done all trouble shooting tech a through Apples and still have not resolved issues on Windows and itunes not detecting my Ipod  nano 5th generation device. Tried restoring the device manually using disk mode and still not being detected by the computer. Device is our of warenty as when service repair charges are $125.00 dolars more than I paid for this device. There must be some way to restore the entire device to factor settings without having to be connected to itunes and Windows. I wish I could connect but again device is not being read. I have another Ipod that is 8GB instaed of 16GB and it works fine. The sad thing about this situation is that my 9year old daughter worked hard doing delivering fliers for a long time to save her money to buy this 16 GB 5th generation Nano. Otherwise the Ipod works well but will not syncronize songs as it is not being detected. Maybe this is a result of corrupt files that got onto my daughters Ipod somehow and thus causing it not the be detwected through the USB connection thus as a result not be understoud as a working device through Windows and itunes. If anyone can help me out there including itune techs that would be well appreciated, but for now my daughter is not able to add new or delete any songs on her ipod as well pictures, and everything. Thanks

    Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

  • Ipod not being detected on my dell latitude620

    I just got a dell latitude 620 laptop
    My ipod is being detected as a "device"
    My ipod will charge, but itunes does not recognize it.
    I've uninstalled itunes and reinstalled it twice.
    And tried about 90% of what apple support suggests
    There is nothing wrong with the laptop...that im aware of.
    Please help
    - manic mass

    When you uninstalled iTunes, did you uninstall *everything*? Take a look at http://support.apple.com/kb/ht1925 , and make sure you completely uninstall iTunes, including the drivers, before you reinstall. If that doesn't work, you might try going back to the last version of iTunes you knew was working -- at least, that will eliminate the question of whether it is iTunes or the iPod. Lastly, sometimes rebooting either the computer and/or the iPod (remember the 5Rs) can sometimes solve the issue.

  • TS3147 My printer was no longer being detected, so I uninstalled it and when I went to reinstall it I discovered that I no longer have a printer pop up menu to select my printer.

    I had a power failure and then began getting a message that the printer (Canon Pixma 610) was not detected. So, I unplugged it from the computer, restarted the computer and no change. The printer was still showing as the default printer, but not being detected. So I deleted the printer and then tried to reinstall it. However, when I clicked on the + sign to reinstall nothing came up. The screen was blank with no printer choices. I went to the Canon website to try and download the driver and received this message: There is no driver for the OS Version you selected. The driver may be included in your OS or you may not need a driver. I would appreciate any help...

    MSG2014 wrote:
    I finally contacted Canon and they informed me that my printer is not compatible with Maverick
    As Greg stated, the Canon support person is simply referring to what they see on the web and knosw nothing about Mac's. The reality is that the v10.8 driver will work on 10.9. You just may need to get past Gatekeeper to install it. So here is a link to the v10.8 driver. If you get a message stating that the driver is not signed and cannot be installed, then this is Gatekeeper blocking it. So to install it, right click (or Control-click) on the installer and select Open from the pop-up menu. Now you will have the option to install.
    The second issue is the printer not appearing in the Add printer window. The USB cable is often the cause as suggested already. Also USB hubs can be a cause. To check if the Mac can see the printer, open System Information and select USB in the left column. The top right pane will show all the USB busses in your Mac. The MP610 should be listed under one of these busses. If it is not present, then try another USB cable and/or another USB port on the Mac. Until you see the MP610 in this view, you will not be able to add the printer.

  • Audigy 2 Isn't Being Detected Correc

    This is a weird problem that I can't find out anything about anywhere online.
    Basically I left home for a week and when I got back my sound was very crackly, with some movies and songs not playing at all. I restarted my PC to see if it helped after checking the speaker connections and testing them with my onboard sound.
    After the restart the SoundCard refused to work at all. I reinstalled the drivers and ran Creative Diagnostic which then resulted in the card apparently not being detected.
    I did a manual install as recommended on the Creative Knowledge Base which resulted in the following items being detected in Windows:
    - PCI Input Device
    - System Interrupt Device (x2)
    - Mass Storage Device
    - VGA Device
    None of these had appeared before and bearing in mind that the only PCI device I own is the Audigy 2 Platinum (my graphics are PCI-E) this REALLY confuses me (the EMU Processor is definitely present when using other diagnostic programs: the SoundCard does exactly the same thing on 2 of my friends PC's by the way).
    Any help would be greatly appreiciated as the card is bearly 3 months old and there is no way it could have been damaged during my time away (locked door, unplugged at the mains).
    UPDATE: Since getting the latest drivers I have sucessfully installed the soundcard but the above items are still listed in device manager and I still recieve absolutely no sound at all!? PLEASE HELP!!
    Message Edited by whiteythomson on 2-03-20062:39 PM

    no, i am just talking about the display attached to the computer. It doesn't seem to always do it either, this time when i started up it was ok, but sometimes when i start up or when it has been sleeping for a while it comes up without detecting the screen. the first time that it happened it was set to like 800x600 or whatever and it was all stretched and pixelated and i changed it to 1400x900, because the default 1440x900 wasn't listed and now when it doesn't detect the screen, it goes to that. Then like i said i have to go into system prefs and click detect screen for it to bring back the original settings. it is very odd, has anyone else experienced this problem?
    MacBook Pro 15" Mac OS X (10.4.8)

  • IPod Touch is being detected by Windows Vista but not iTunes

    After updating iTunes to 9.0.1 my iPod Touch is being detected as a camera by my Windows Vista computer, but iTunes is unable to detect my iPod.
    I have all ready tried using different USB ports and a different USB cable with no success. I have also tried uninstalling and reinstalling iTunes with no luck.
    Please help!

    I have the same issue here. Please help...

  • Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

    Ipod Touch 4th generation 32G not turning on, not charging.
    I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
    It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
    Holding home and power button will not reset.
    Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
    NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
    My Itunes is up to date, as is my OS.
    All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

    See if you missed anything here:
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPhone 4 isn't being detected by iTunes or My computer.

    i have an iphone 4, and randomly my iPhone wasn't being detected by iTunes or my computer. i tried resetting the settings on my device, and the "apple mobile  device" settings on my computer and still nothing. I'm worried because i'm buying a iPhone 5 in a few days and dont want the same problem like this where i can't download my music and things to it. please help.

    See these support documents. Since you do not indicate what computer OS, here are both.
    Windows:     http://support.apple.com/kb/TS1538
    OSX:     http://support.apple.com/kb/TS1591

  • PLEASE HELP! My iPod is not being detected on iTunes!

    I know everyone is posting about this, but nothing seems to be working. I've done tons of research and tried it all!
    Here's the story: My 1st iPod has been using the firmware 1.1.1, until I recently decided to update it. It was updated to 1.1.5, and the moment iTunes was restarted, it could no longer be detected by iTunes! My iPod has been working fine before the update, so it can't be the iPod itself. I've listed below all the things I've tried! The iPod DOES appear in My Computer, but NOT in iTunes (using iTunes 8, but I have tried uninstalling and reintalling different versions)
    Things I've tried and haven't worked:
    - Restarting the computer and iPod
    - Resetting the iPod by holding the Home and Sleep button
    - Uninstall/Reinstall iTunes (several times, on different versions)
    - http://support.apple.com/kb/HT1852?viewlocale=en_US
    - Apple Support's 5 R's, and related articles
    - Thread suggestion: http://discussions.apple.com/thread.jspa?threadID=1821771&tstart=0
    - iPod not recognized on laptop article: http://support.apple.com/kb/TS1401
    - Starting/Stopping the iPod Service and Apple Mobile device
    - Uninstalling and reinstalling the device in Device Manager
    - Plugging into different USB ports (they were fully functional before firmware update)
    - Plugging into a different computer (where it was also not detected on iTunes)
    I believe my problem is maybe that I need to reinstall the firmware, but I can't do this without it being detected on iTunes! Any ideas???
    I really hope someone out there can help me! I am so frustrated and stuck with this problem and have been going around in circles! Thanks so much for ANYONE's help!

    look at the brightside at least your computer sees yours

  • My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

    My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.  I've since deleted this podcast with no luck.  I've restarted both the phone and the computer, still no luck.  One computer is running Vista and the other Windows 7, both have the latest Itunes Update.  Anyone have a fix for this?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • My SD card isn't being detected by my MacBook Pro

    My SD card isn't being detected by my mid 2012 MacBook Pro. It's detected fine by my camera and my iPad (using the Camera Connection Kit), but not my computer. I've tried it in both OS X Mavericks and Windows 8.1 using my Boot Camp partition, but it's not being detected at all in either OS. This has worked before just fine.
    Does anyone have any suggestions on what might be wrong and how I can resolve it?

    I too facing the same problem after installing Mavericks. I tried opening iphoto first and then inserting SD card, that also doesnot detect. waiting for other solutions......thanks in advance

  • Hp v235r flash drive not being detected on my computer

    Hi,
    I am using hp v235r flash drive for more than 5 years. It's not being detected on my computer since two days. Can any one solve my problem, as there is lot of important data stored in it and hasn't been backed up recently.

    Hello budda48,
    Its possible the driver for the pen drive is corrupted in your computer, or the drive has met its end of life.
    First, confirm that the Pen Drive is seen by other computers. Plug it in to another computer that you havent tried yet.
    If it is not working on other computers, then the usb drive is corrupted and there wont be anything else we can do.
    If it is working in other computers, then try these steps to troubleshoot the Pen Drive.
    Confirm that the port on the computer is not bad. Choose a different port to insert the drive. Next…
    Part 1: Make sure that the drive has a drive letter assigned in Disk Management.
    Open Computer Management by right clicking on Computer and clicking Manage.
    Click on Disk Management. Give it a moment to open the view of the drives installed.
    Look for a drive that does not have an assigned drive letter and is not labeled as System Reserved.
    Note: System reserved drives are reserved by Windows and will not allow you to assign a letter.
    Right-click the unlabeled drive and click Change drive letter and paths…
    Click Add and then click OK to select the first available drive letter.
    If the Change drive letter and paths… option is not available, make sure that the drive is Online.
    If the drive is Offline, right-click the disk number and click Online.
    Part 2: If the drive does have a letter assigned and it still does not work, uninstall the driver.
    You can safely remove any usb drivers that are not in use (hidden drivers). Devices that get plugged in later will simply reinstall its needed driver again.
    Remove the pen drive from the computer if it’s attached.
    Right click Computer and click on Properties. In the System window on the left side, click on Advanced System Properties.
    Choose the Advanced tab and click on Environment Variables… button at the bottom.
    Under System Variables, click on the New… button
    Type this in the box that pops up. Variable Name: devmgr_show_nonpresent_devices and also give the Variable Value: 1
    Click OK on all the open windows to close them out.
    Go to Computer Management again and click on Device Manager. Go to View at the top of the window and click on Show Hidden Devices.
    Click on the drop down arrow for Universal Serial Bus Controllers to open the list. Look for any USB Mass Storage Device that is hidden (greyed out) and delete it. There may be several and it’s ok to delete all those hidden USB Mass Storage Devices.
    When you connect the pen drive to the computer again, give it a minute to reinstall the driver.

  • My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

    My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

    iPhone, iPad, or iPod touch not appearing in iTunes

  • My ipod is not being detected on my dell latitude620

    I just got a dell latitude 620 laptop
    My ipod is being detected as a "device"
    My ipod will charge, but itunes does not recognize it.
    I've uninstalled itunes and reinstalled it twice.
    And tried about 90% of what apple support suggests
    There is nothing wrong with the laptop.
    Please help
    - manic mass

    Click the Start Menu, right->click on Computer and choose Manage.  When the when comes up, make sure you click on the Device Manager in the left hand pane of iTunes.
    Is your iPod listed as unknown or anywhere under the USB section?  If you do find it, try right->clicking on it and choose Update driver or uninstall. Then unplug the iPod for a few sections and then plug it back in.
    B-rock

  • HT203128 My iPad is not being detected by iTunes after I updated to the latest version of iTunes.  What should I do?

    After updating to the new version of iTunes, my iPad 2 is not being detected when I tried to sync.  Any solutions?

    A few things to try. Any one or a combo mayhelp
    Reset your iPad.
    Hold down the sleep and home keys for about 20 seconds. Then plug it back in and see if it is seen now.
    Try a different USB port
    Reboot your computer
    If you have a PC:
    If that doesn't fix it, go into the control panel, add/remove programs. Uninstall iTunes, apple Mobile device service, apple application support.
    Then redownload and reinstall iTunes. then try again.

Maybe you are looking for