Largest hard disk on MSI KT4A Ultra (MS-6590)
MSI say the largest hard disk the KT4A Ultra (MS-6590) supports is 160GB:
http://global.msi.eu/index.php?func=prodfaqanswer&faq_no=912&prod_no=548&maincat_no=1&cat2_no=&cat3_no=
Is that right?
Does it apply to SATA or just IDE?
Can a BIOS update or other patch get over that limit please?
Thanks
Toby
If you'd read my sticky topic, the answer was there all along...
> SocketA board sticky topics - please look here first <
Quote from: > General FAQs for MSI SocketA boards <
I want to fit a 250gb HDD to my system. Will it work?
Check your board's support page here. Look for the Test Report for Hard Disks. Once a board supports greater than 137gb, any size drive will work. If you see a size such as 160gb tested as OK, then you will be fine!
Similar Messages
-
I have this motherboard: MSI KT4 ULTRA MS-6590 sempron and I have already bought the new CPU SEMPRON (AMD Sempron 2400+). I want to know if my motherboard is compatible with new CPU.
Thank you
Sorry for my English, but I'm Italian.Hi
Not according to http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=356&kind=1 -
Problem of 1.5TB hard disk with msi p7n sli platinum
I have just bought a new 1.5TB hard disk (Western Digital). Bios can detect the disk but when i boot into Windows (XP sp3) its does not show?? can anyone tell me how to fix the problem. I have updated my mobo bios to 1.3 which is the latest available from the MSI site.
Thanks in advancedDid you initialize the disk yet? Go to Control Panel, Administrative Tools, Computer Management, and then click on Disk Management. You should now see the disk listed there. Right-click the disk and initialize it. You can get to disk management directly by hitting the WindowsKey+R, type diskmgmt.msc, hit okay or enter, and the disk management box below will show.
-
CONSIDER UPGRADING HARD DISK OF MSI GT60-0NC
I had bought my new MSI GT60-0NC recently in Malaysia. My com is equipped with 750GB 7200rpm hdd, probably sata maybe.
So far I am satisfied and indeed quite impressed with its performance. Who knows maybe after few years my specs will soon outdated and cant cope with my requirements for performance?
I would like to seek for some guidance for upgrading hdd to other type of hard disk drives like ssd or raid-II.
Is any kind of SSD hard drive can be installed on the laptop? Any brand recommendations for ssd or hybrid hard disk drives?
Thanks a lot.It's really hit or miss with most SSD's for some reason.
I've seen a few people who got Samsung 840 non-PRO/PRO drives have problems, and some who had no problems.
Personally, I've got the super raid adapter and have 2 x Mushkin Atlas Deluxe mSATA 240GB drives in my laptop, and it work great.
I've had a few people with Intel 520 based drives have problems as well.
Personally, I would find what you want and try it out. If it doesn't work, you may have to return it though. Everything SHOULD work, but it's not always the case unfortunately. -
MSI KT4 Ultra (ms-6590) error's
Hi all,
recently purchased the KT4 ultra, no probs installing Windows XP or with the SP1.... installed Office XP Professional fine and all seemed well for over a week. then the following....
1. Drives started to drop from DMA to PIO mode, uninstalled and re-detected the ide controller to get them back on DMA.
2. USBUHCI.SYS BSOD's when installing software.
3. I/O errors when installing from cd's / copying large files.
4. CRC errors when installing from cd's / copying from large files.
5. "Corrupt Media", "Corrupt Installation Files" when installing cd's.
System Specs....
Antec AMD Approved PSU (350watt)
KT4 Ultra (MS-6590) (1.1 bios, not flashed)
Athlon XP 2200+
Coolermaster LLC-H61 Silent Heat Pipe HS/Fan
512Mb (2 x 256mb) Crucial PC2700 DDR (as recommended)
IBM GXP75 30Gb Deskstar
Software Specs...
Windows XP (patched with SP1)
VIA 4.43 4 in 1 (as off MSI CD)
USB Patch from MSI Website
1.10 filter patch off VIA site
I have posted on ViaArena as well and there are a more people there with the same or similar problems.
Regards
RobHi gruberstuber,
It sounds horribly like you're IBM Deskstar may be living up to it's more threatening nickname of DeathStar. These HDDs have a pretty awful history for reliability and from the symptoms you describe, I would be feeling pretty nervous about continuing with it.
Do you have access to another known good HDD at all, preferably from Western Digital or Maxtor? If you do, it would be worth substituting your IBM for one of these and giving that a go. Might work wonders.
It's not as likely, but it's possible that your PSU is rated slightly to small for the Graphics Card you're using. The GF4 4600 is notoriously power hungry and it is possible that this could be drawing your main voltages down to below -5% of the nominal voltage, this can cause you all sorts of weird problems. As a guide, you can't really tell if a PSU is holding up OK under load conditions by checking the voltages when the system is unloaded, all PSU's will give you terrific voltages in that situation.
I would go up to at least a 400W good quality PSU from either Antec or Enermax to be absolutely sure that the GF4 4600 is being catered for.
All the best,
Dimal. -
Initializing hard disk controller on kt3 ultra 2
I have a kt3 ultra 2 and when I open my pc, the start blocks on initializing hard drive controller (on the D-Bracket) but my harddisk is well plug. Someone have an idea ?
Hi,
I suggest disassemble the whole PC, use plastic standoffs for the motherboard, and put all back together;
Another is to use 6 screws + paper washer to hold the motherboard on the casing.
This should fix the problem. -
KT4A ULTRA 6590 DVD and Floppy issues
I'm stumped and frustrated...please be kind! I've upgraded my KT4A ULTRA 6590 Ver 1. with AMD Athon XP Barton 2500 for my kids computer. Everything works great except I cannot see files on either my DVD or 3.5" floppy...unless there is a disk in the drive when I boot. Oddly, I can burn CDs but cannot see the result until I load the CD on my other PC. Through several suggestions from reading the forum, I did go to Safe Mode and sure enough the floppy and DVD work fine. I also tried another known good CD RW and it also exhibited this same behavior.
The BIOS version when I start up is v3.0 (see below), but things appear to be pointing to drivers and/or BIOS. Did update/install the nVidia driver for the video card and also updated to VIA 4 in 1 ver 4.55. Have made several unsuccessful attempts to use the Live Update 3...it basically does not do anything, or it must be incredibly slow when it goes to the MSI website.
In various other attempts to find the correct BIOS for MSI KT4A ULTRA 6590 vER.1, I visited the MSI iste "BIOS Search" and discovered that it has a version 1.4 (4/29/2003) and v3.0 (5/29/2003)...this looks fishy to me. On yet another MSI Mainboard BIOS detail it says use Ver 3.0, but in the very next line says "This BIOS cannot be used on KT4 Ultra (MS-6590)".
I was further consfused when attempting to determine which BIOS was installed. "MSI Info View" program BIOS tab says that "AMI BIOS version is 07.00T", While the MSI Fuzzy Logic program on the MSI info page says the "Chipset : Via KT600". Neither of these appear to be correct.
At this point I ready to throw this thing away and buy another board.
jw
-MSI KT4A ULTRA 6590 vER.1
-AMI rev 3.0??
-AMD Athlon XP 2500 Barton
- 512MB
-NVidia GeForce2 400 MX
-Power Supply 500W+
-40GB (IDE1 Master) WEstern Digital 10GB WD (IDE1 Slave)
-DVD RW NEC 3520 A
-Windows XP Service Pack 2Cleared the CMOS and made the advanced chipset configuration changes...but no improvement. I did also confirm that during boot, the drives are recognized properly.
Not an expert, but since it operates normally in Safe Mode I'm still suspicious of the IDE, graphics drivers, and/or conflicts. When I look at the device manager in XP, the graphics drivers is new as expected, yet the IDE are standard XP. Since I updated to the 4-in-1 version 4.55, I would have expected some change to the IDE driver dates, but it appears is using the standard Windows drivers...but not sure.
HERE is some more data from the 'System Information...Conflicts/Sharing' that may make sense to you (not me):
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
I/O Port 0x000003C0-0x000003DF VIA CPU to AGP2.0/AGP3.0 Controller
I/O Port 0x000003C0-0x000003DF NVIDIA GeForce2 MX/MX 400
IRQ 5 VIA Rev 5 or later USB Universal Host Controller
IRQ 5 VIA USB Enhanced Host Controller
IRQ 10 NETGEAR WG311v2 802.11g Wireless PCI Adapter
IRQ 10 VIA Rev 5 or later USB Universal Host Controller
IRQ 11 NVIDIA GeForce2 MX/MX 400
IRQ 11 CMI8738/C3DX PCI Audio Device
IRQ 11 VIA Rev 5 or later USB Universal Host Controller
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF VIA CPU to AGP2.0/AGP3.0 Controller
Memory Address 0xA0000-0xBFFFF NVIDIA GeForce2 MX/MX 400
I/O Port 0x000003B0-0x000003BB VIA CPU to AGP2.0/AGP3.0 Controller
I/O Port 0x000003B0-0x000003BB NVIDIA GeForce2 MX/MX 400
Here the 'System Information' data:
IDE Info
Name VIA Bus Master IDE Controller
Manufacturer VIA Technologies, Inc.
Status OK
PNP Device ID PCI\VEN_1106&DEV_0571&SUBSYS_05711106&REV_06\3&61AAA01&0&89
I/O Port 0x0000FC00-0x0000FC0F
Driver c:\windows\system32\drivers\viaide.sys (1.00.01.01, 5.25 KB (5,376 bytes), 8/18/2001 5:00 AM)
Name Primary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&127A70AC&0&0
I/O Port 0x000001F0-0x000001F7
I/O Port 0x000003F6-0x000003F6
IRQ Channel IRQ 14
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/18/2001 5:00 AM)
Name Secondary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&127A70AC&0&1
I/O Port 0x00000170-0x00000177
I/O Port 0x00000376-0x00000376
IRQ Channel IRQ 15
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/18/2001 5:00 AM)
CD-ROM
Drive E:
Description CD-ROM Drive
Media Loaded No
Media Type CD-ROM
Name _NEC DVD_RW ND-3520A
Manufacturer (Standard CD-ROM drives)
Status OK
Transfer Rate Not Available
SCSI Target ID 0
PNP Device ID IDE\CDROM_NEC_DVD_RW_ND-3520A____________________1.04____\5&2DFCC752&0&0.0.0
Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 48.38 KB (49,536 bytes), 8/18/2001 5:00 AM)
IF ANY OTHER INFO WOULD HELP, PLEASE LET ME KNOW...ANY HELP/ADVICE IS APPRECIATED...THANKS VERY MUCH!! -
Help me please whit a KT4A Ultra!! Thanks
?(
Hello friends, how are you?
I have a problem whit my mother board.
I bought a MSI KT4A Ultra the last week, and I bought a AMD Athlon XP 2200+ (1.8Ghz aprox)too for this mobo.
When I turn on the computer and pass the post, the post say that I have a AMD Athlon xp 1500+ (1.35Ghz aprox.), and I don't now why the post say this if I put on the mobo a Athlon xp 2200+. Plese help me to correct this problem.
Thanks.Thanks edyros
This was the problem, I didn't change the FSB from the bios, for this the post say tha I have 1500+, but I Changed the FSB to 133 Mhz and now the post say exactly 2200+, thanks friend!!! the problem was to resolve, and the mother board work very well.
Thanks friend for the solution.
Good bye.
NOTE: Escuse me my english because I speach spanish, but I hope that you undestand me. -
Upgrade Hard Disk in MacBook Pro
I recently purchased (within the last 2months) a new MacBook Pro with the 200GB Hard Drive. I decided that the upgrade to the 250GB was not a significant upgrade to warrant the money and that I would inquire at this point what the maximum upgrade Apple will perform. That leads me to my question.
I need to have Apple install the new hard drive because I have the 3 year protection plan and do not wish to void the warranty. Can someone tell me what the largest hard disk that Apple will install is?
Thanks.I have checked with several sources and found the same. Apple will not do the upgrade, but you need to find an authorized Apple Service Provider to do the upgrade.
Even though your Apple warranty is still intact, it will no longer cover the drive itself. so if your drive fails, you will have to use the warranty supplied by the drive-vendor (3 years on Hitachi Travelstar 500GByte). You'll probably have to pay labor to have it repaired though.
I just had the 500GB installed by an Apple Dealer in Boulder last week.
Jim -
Hi all!
I have a BIG problem, I have tried to look at this board, but there is many different answers out there ;(
I have KT4 Ultra with Athlon XP 2600+
I have set FSB to 166, and when I startup BIOS says Athlon XP 2600+.
But in windows system, it only says:
AMD Athlon XP2600+
2.09Ghz !!!!
768Mb RAM
Why is windows only says 2.09Ghz??
AND, I think my system is very slow. I used to have AMD 1200Mhz. And this sytem is almost like my last computer.
My System:
MSI KT4 Ultra ( MS-6590 ) with BIOS
CPU AMD Athlon XP 2600+
768MB DDR 400 RAM
GeForce 4 TI4200AGP 8x
80 Gb Seagate 7200 HarddriveQuote
Originally posted by swedecom
Ok, I use these settings in my BIOS, are they right for my system??
MY SYSTEM:
MSI KT4 Ultra ( MS-6590 ) with BIOS
CPU AMD Athlon XP 2600+
768MB DDR 400 RAM
GeForce 4 TI4200AGP 8x
80 Gb Seagate 7200 Harddrive
MY SETTINGS IN BOIS:
Spread Spectrum = +- 0.25%
CPU FSB Clock = 166Mhz
CPU Ratio = Auto
CPU Vcore = (V) Auto
DDR Voltage (V) = Auto
Termination Vol (V) = Auto
AGP Voltage (V) = Auto
Hope someone can help me out -
KT4 Ultra (MS-6590) Please help me!
After som reading at MSI homepage i noticed that my motherboard suppurted AMD Athlon 3000+ if i flashed the BIOS.
So i did get a brand new AMD Athlon 3000+, flashed the BIOS to ver 1.4. And I changed the Frequency/Voltage to 166, and i was up and running.....for a while. Every time a start a game like FS 2004 or are working in 3-4 different programs the computer like DW, PS and Illustratoer:
1. close down one or two programs, or shuts down the game, without any warning.
2. reboot the computer without any warning.
But if i change the Frequency/Voltage to 133 the system get's stabil.
Quote
Question
What is the highest CPU that KT4 Ultra (MS-6590) can support?
Answer
It can support up to Duron 1.3GHz & XP3000+ CPU
Refer to http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=356&NAME=MS-6590
Question
Why KT4 Ultra (MS-6590) cannot detect my AMD XP 3000+ (FSB 333) CPU properly?
Answer
FSB clock by default is 100, make sure that BIOS setup-->Frequency/Voltage Control-->CPU FSB clock set as 166
What can i do with this problem?
Computer specs:
Motherboard: MSI KT4 Ultra (MS-6590) Bios ver. 1.4
Motherboard Chipset: VIA VT8377 Apollo KT400
System Memory: 1024 MB (PC 2700 DDR SDRAM)
VGA Card: GeForce FX 5900 Ultra (256 MB)
Sound Card: Creative SB Live! Player 1024
Power supply: BeQuiet Silent 450 W
Disk drive 1: Western Digital 70 GB
Disk drive 2: IBM 60GBEffect: +3,3V: +5V: +12V: -5V: -12V: +5Vsb:
BQT P4 400W - SW1.3, ATX 450 Watt 28A 45A 22A 1.0A 0.8A 2.5A
PS
I had the same problem with a old Aopen PSU with 230W, this problem i have is one of the reason that i have a brand new PSU as well. -
KT4 Ultra (MS-6590) and Ati Radeon 8500
Hello. First of all excuse me for my english, but I'm italian
After upgrading from 1.2 to 1.3 bios I had visualization errors in Windows XP (vertical black lines, font corruptions, ecc), so I decided to downgrade bios to version 1.2. Now MSI released 1.4 bios and I upgraded to this new version with the hope they had solved these problems, but they hadn't. Then I tried to disable AGP Fast Write and now Windows looks fine even if sometimes there are some black screens for few milliseconds during gaming.
There is someone that have my same problems? Any suggestion? I don't want to leave 1.2 bios forever
Thanks for replies.
MSI KT4 Ultra (MS-6590) Bios 1.4
AMD Athlon XP 2100+ .13 micron
512Mb DDR Geil @ 333MHz
ATI Radeon 8500 BBA Retail
Microsoft Windows XP Pro SP1
Latest VIA 4in1
Latest ATI CatalystKT400 6590 v1.0 (BIOS 1.4)
AthlonXP 1800+ (Palomino 1.53 GHz)
512MB DDR 333MHz
ManLi ATI Radeon 8500 128MB
Maxtor 80GB ATA133
AverTV Studio (model 203)
I have the newest BIOS for my RADEON, but it doesn't work! ;(
Why??? ?(
I don't want FastWrite OFF forever! X(
ManLi ATI Radeon 8500 128MB
BIOS Version: 7.008
BIOS Part Number: 113-DH-84611P02345
BIOS Date: 2002/7/12 -
MSI B85M-G43 can't install Windows 7. Hard disk not detected.
Hi,
I just built a new computer for the first time. I followed the instructions and did everything correctly. but am unable to install Windows 7 Ultimate 64bit. Hard disk isn't always detected during the installation.
But when it appeared in the "Where do you want to install Windows" list along with system, I tried to format the hard disk and got a message "Failed to format the select partition. [Error 0x80070057]."
Then I restarted the computer, the hard disk no longer displayed in the list, so I put motherboard driver disc and clicked on Load Driver and opened Storage\Intel\PCH_12.0\f6flpy-x64. It loaded, then I got a message saying "To continue installation, use the Load Driver option to install 32-bit and signed 64-bit drivers. Installing an unsigned 64-bit device driver is not supported and might result in an unusable Windows installation."
I restarted again and disabled Driver Signature Enforcement, but it didn't help. I still got the same message.
In the computer case I have these devices:
- MSI B85M-G43, Socket-1150
- Intel Core i5-4430 Processor
- Corsair Vengeance DDR3 1600MHz 8GB
- MSI GeForce GTX 650Ti BOOST 1GB
- Cooler Master GX 550W PSU
- WD Desktop Green 1TB
- SuperMulti 16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive
Everything is plugged in correctly. Hard disk connector plugged in SATA 1 and DVD -> SATA 2.
The installation is pretty slow, regardless if i install it via USB or x16 DVD. All except DVD and hard disk are disabled. It's also worth to mention that even DVD and USB aren't always detected in the click BIOS.
So I'm wondering if anyone here can help me? ThanksHi and
1: What BIOS version you have? .. Have you tryed to downgrade/upgrade it already?
2: Have you tryed it in those SATA 2 ports? ...is it same strory?
- On SATA there aint any master or Slave like on IDE so if you are under same controller it dosent mutter what port you use on what device.
Note: SATA 3 Ports are faster then SATA2 ports, but even SATA 1 can handel your DVD or HDD. So no lose if you need to use SATA 2 ports.
Hope this get you foward! Cheers Mummy -
Hard disk problem after installing Solaris 10 u5 on a Sun Ultra 24
Hi.
After receiving a new Sun Ultra 24, shipped with Solaris 10 u4, the first thing I did was installing Solaris 10 u5. X wouldn't start but that was not a big problem and installed it in text mode. Installation went fine but, when the system starts, a single beep is heard and after some seconds some warning message appear on the console, before the "Hostname: ..." message, informing that some read operation on my hard disk had timed out and were aborted. The system then starts up normally. The only other anomaly is that the diagnostic partition in unbootable.
I ran the hard disk tests from the tools and drivers CDs and all of the tests were passed. Solaris 10 u4 was working normally so I'm wondering if this may be a bug.
Thanks for your help,
Enrico.Thanks anyway, I discovered what the problem was: a bug in Solaris 10 u5:
http://opensolaris.org/jive/thread.jspa?threadID=58768&tstart=75
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6536722
Thanks,
Enrico -
Hi, i would like to know if the msi gt70-20c 252 has the raid msata card alrady installed in, or only a sata 2 port, or nothing at all.
Does anyone bought a gt70-2OC with a single hard disk and after that tried to installa a normal sata drive?
Thanks
ps. this thread is duplicated, please admin delete the one in spanish i wroteQuote
ps. this thread is duplicated, please admin delete the one in spanish i wrote
done
Quote
Hi, i would like to know if the msi gt70-20c 252 has the raid msata card alrady installed in, or only a sata 2 port, or nothing at all.
Does anyone bought a gt70-2OC with a single hard disk and after that tried to installa a normal sata drive?
Thanks
it depends, there are different options and configurations that's available.
you have to ask your local reseller for exact specifications of the products that are available for your region
Maybe you are looking for
-
PC to Mac using MA: no verification code on PC??
MA on my PC is telling me it's waiting for my Mac to connect, but my Mac is already recognizing my PC and the verification code appears on my Mac. Yet my PC is still searching for a connection. Help?
-
Issue with installation of Solaris 10 UFS in Ldoms
Hi Guys, I'm trying to install Solaris 10 with UFS but not able to make more than one partition. My vdisk is a slice of physical server hard disk. When I try to modify the table partition of vdisk, it fails. I cheeked in documentation and saw that vd
-
Using filewriters to write to an already opened file
Hi, I have used a filewriter to write some message to a file in a loop. Will i be able to write the messages for the rest of the iterations, if after the first iteration , i open that file in a notepad and check out if the message is being written pr
-
Project Scheduling in Planning Board
Dear Experts, When I am scheduling the project (all wbse and network) through planning board, after clicking the schedule icon a pop-up window is coming and in the pop-up window it is written Select set of dates . Any idea why this pop-up is coming.
-
Neighbor IP Address is missing in "show cdp neighbor detail"
Hi Sir, Two switches, SwitchA and SwitchB, are connected to eath other via a VLAN trunk. SwitchA is a Catalyst 3508G-XL. SwitchB is a Catalyst 2948. Both running Cisco IOS software. The VLAN trunk is established using "on" mode because the switches h