Largest Stage Size Possible In FP 10

Does anyone know what the largest size is that the stage can
be set to? In flash player 10 I get a black line whenever I go over
4080 pixels. Has anyone else tried this or seen something
similiar?

See the following thread over in the flash forums:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=194&threadid=1403681

Similar Messages

Maximum Stage Size Possible in FP 10

Does anyone know what the max size is in FP 10 for the stage?
When I scale a swf larger than 4080 I get a black line at the
bottom below my content. Can anyone reproduce this?

It is true that the Flash IDE restricts stage size to 2880.
My question is really how large does the flash player support
scaling content?
If I have a swf that I created in the IDE at 100x100 and then
I open it in the player and tell the player to scale to 5000x5000
it appears that FP 10 doesn't complain. FP 9 and earlier did
complain by not rendering content past a certain pixel boundry.
Flex seems to have an issue if you have a gradient set on the
mx:application component (I haven't tested others yet), which is
probably the issue with the 4096 single bitmap boundary.
The crux of the matter is that I am getting artifacts on the
screen when I scale the player to a very large size that has a flex
swf loaded. The artifacts are not part of any content that I load.
So either they are caused by the flex framework components or the
flash player itself.

Possibel to give stage size as parameter in html ?

I know Stage size width and length are read only, but i think
to remember that it was possible to change it the moment you call
it from html ?
No ?

Just to add my 2 pence to what was already said..
One of the rules for Robust Software is not to rely on implicit data type conversions to make things work. And that is what you are doing.
The parameter is a date type. You pass a string value. Oracle now attempts to implicitly convert that string to a date.
Sometimes it will work. Sometimes not. Why? Because it depends on things like the NLS settings of that particular sessions that governs implicit data conversions. Like what format must a string be in to be successfully converted into a date?
And relying on this, is bloody dangerous. Consider the string '12/01/2008'. One session has a NLS date format of 'dd/mm/yyyy' and the other the format 'mm/dd/yyyy'.
The result will be a successfully converted date.. but the WRONG date. And slowly and silently (no errors) your application starts to corrupt data in the database, because your code relies on implicit data type conversions.
General rule: Implicit data type conversions are EVIL! Do not use!!

Flash stage size problem

Am using Flash Pro CS5 and although the documentation for Flash Player 10 at the link below
http://helpx.adobe.com/flash-player/kb/size-limits-swf-bitmap-files.html
says that the max is 4050 by 4050.
We are trying to run a swf in a monitor array of 3840 by 4320 but in the editing of the document properties the limit is only 2880 by 2880.
Has this been fixed in FLash CS6?
Does anyone have any advice?
We are stumped.

Originally were using FP11.2 and then tried FP11.1 and went back to FP11.2 but couldn't load the swf at full stage with either. We can load a 1920 by 2160 stage but it doesn't look to be the right size - but were able to load the swf with the smaller stage size.(That is a separate issue though - the non-exactness of the stage dimensions.)
We are attempting to output to a two by four monitor array aiming for a 3840 (1920 x 2) by 4320 (1080 x 4) and the large stage size should be possible according to the specs but no go.

Lock stage size to movie's stage - What does this do?

I thought it would make the projector window not resizable,
but it doesn't.
What else could this function possibly be for? (I did figure
out how to
make the projector non-resizable, via (the stage).resizable =
FALSE. But
this seems to work completely independantly from the "Lock
stage size"
setting in Publish settings.

Let me try to explain in the easiest way possible.
1. Reads the lines of the given file attached to the file pointer fp.
2. If the first three characters of the read line is '***' and the date mainted in the
block is not empty, the block date value is set to first 100 characters present in
the read file line
The above set of code would be repeated for the first 20 lines present in the file.
3. If the file date in the block is null, then it is filled with some temp value.
4. Store current year into variable v_temp_line
5. If the value present in the block date is current year then do the following:
a) obtain 16 characters from v_temp_line string starting from the position where
current year starts. Ex. Let us take this string -
ABCDEFG2006-07-07142325ABCDFS
Here current year 2006 starts at 8. so this code will result in
2006-07-07142325
b) Then it is reformatting it to the format 'YYYY-MM-DD HH24:MI'
c) Converting the date into char with the format 'DD Mon YYYY HH24:MI'
d) Stores the value
6. Closes the file
7. Calls the subroutine get_file_size if the obtained date is greater than the
calculated date.
On the whole what this code does is reading 20 lines of a file, obtains the date from the read line and if the read date is of current year, stores the value in block variables.
I hope this explanation would be useful to you.

Edit stage size without effecting elements position.

Question. Can you change the size of your stage, say smaller than what you started with, so that when you move your elements to the new position of the stage the motion paths do get messed up because you moved everything?
I have a "full" page layout that I would like to cut in half but the stage jumps to a "middle" point and when I try to move all my elements, some with motion paths, it increases the distance of the path and destroys it. I don't see any way of locking the paths to move an element and I have 23 elements with paths to move so moving each would suck.
I know Edge is basically in Beta 24, 7 because it's still not flushed out anywhere near where it could be. If they just allowed you to adjust the stage size by locking a region kinda like page size in Photoshop or adjusting the page like in Illustrator with cropping.
Any suggestions or help would be greatly appreciated.
Thanks,
Ryan.

Hi Colin,
Thanks for the fast reply.
I guess I checked fullscreen when creating the project, however, when setting fullScreen to false (and uncommenting the still commented node?!) in de descriptor file I get the following compile error:
Error occurred while packaging the application:
/private/var/folders/gv/gv-j1H1UFJ4olvFpGwVTVk+++TI/-Tmp-/AOT1309729499262/Box2DiPad-app.x ml(109): error 103: application.initialWindow.fullScreen is an unexpected element/attribute
User error somewhat or bug?
... Rats! In case anyone messes up like me: The fullscreen node gets rewritten all the way at the bottom of the initialWindow section. So it needs to be changed there....
Is there anyone who can shed some light on AIR 2.7 update progress?
Thanks,
Manno

Changing Stage size at runtime

I have been poking around and not finding any info on this.
What I want to do is change the height of the STAGE (not a
MovieClip) based
on which view I'm showing the customer at a particular time.
For instance...
I may have a thumbnail and a detail view for a product. I
don't need a lot
of screen real estate to show the thumbnail view, but I'd
like to make the
swf taller if the user switches to the detail view.
I don't simply want to make the swf taller by default because
I'll have a
ton of unused whitespace in thumbnail view, which will look
stupid.
I shouldn't have a problem with the JavaScript to change the
height
properties in the HTML tags for the Flash object, but not
really sure if/how
to do the other part in Flash. Everything I've seen so far
has been
read-only properties.
Thanks,
Chris.

did you change stage size?
how can you do this without javascript?
"Christopher Hayes" <[email protected]> escreveu
na mensagem
news:ee4csi$ent$[email protected]..
>I have been poking around and not finding any info on
this.
>
> What I want to do is change the height of the STAGE (not
a MovieClip)
> based on which view I'm showing the customer at a
particular time.
>
> For instance...
>
> I may have a thumbnail and a detail view for a product.
I don't need a lot
> of screen real estate to show the thumbnail view, but
I'd like to make the
> swf taller if the user switches to the detail view.
>
> I don't simply want to make the swf taller by default
because I'll have a
> ton of unused whitespace in thumbnail view, which will
look stupid.
>
> I shouldn't have a problem with the JavaScript to change
the height
> properties in the HTML tags for the Flash object, but
not really sure
> if/how to do the other part in Flash. Everything I've
seen so far has
> been read-only properties.
>
> Thanks,
>
> Chris.
>
>
>

SCN document: 'Insert Image' greyed out at a certain stage/size

I noticed a similar issue likeTammy has reported in discussion/thread .Cannot insert or upload an image
After having inserted text and several images to a draft document, the 'Insert Image' icon became greyed out at a certain stage/size.
I did some tests following document Solution for Error: Cannot Insert Images on SCN Content, but the the behavior remained the same. Only after having deleted the last inserted image in the document > Save Draft > Edit again the 'Insert Image' icon was not greyed out anymore which is argueing for a size restriction.
The same html coding as in the document put into a blog does not grey out the ‘Insert Image’ icon. But I found out that after clicking on the ‘Insert Image’ icon > ‘From your Computer’ tab ‘Browse’ is greyed out. Strange and argueing against a size limit is, when I choose ‘Uploaded Images’ I can select images and still insert them into the blog.
Does someone have similar experiences / can assist.
Thank you, Barbara

We have a recent discussion in SCN support.
He has same problem. Have a look into the discussion Issue with 'Insert Image' button while creating document in SCN
I suggest to split you document into two part as part 1 and part 2.

Set stage size?

Is there a way to have the stage size change during this one
section that is vertically longer? I'd prefer not to have the html
scrollbar through the whole site, but I need overflow to show for
this one page of the Flash website (website is one long timeline
with labeled frames for each of the pages)
Thanks to all the smarties!

in a manner of speaking you are correct jp - you *can* use
the onResize event of the Stage class to adjust the size of the
stage to the browser window or table, you *can* also 'scale' the
content of the stage through publishing and code, on-the-fly
durring runtime in a similar manner. however that is not what the
halo's problem relates to, he wants to change the stage only during
one portion of the site navigation, so unless the entire site was
built dynamically, and any other page content was present, it would
be problematic to scale the contents 'all' to the height of the MC
in question. a better solution for the issue as he describes it is
to use a scrollpane window, as i'd mentioned.

Stage size for a Flash website?

I am taking a beginners Flash course and our final project is to create a movie/website in Flash. 100% Flash based. In a previous course, I made an HTML site. For this project, I am recreating that website in Flash. But what should the stage size be? That is where I am stuck. I don't know what a normal Flash site size should be to fit the screen like a normal HTML site. Can anyone help me here with this please? I already know to havethe dimentions set to 100% and 100%. But for some reason, when I use Control > Test movie, it never seems to fit right. It's either crunched together to much or spread out to far to where the header and footer are partially off the screen. I've seen posts on the web from years ago that said 950x550 is the size needed. Is that still the case? Because it just doesn't look right. With HTML the page height would adjust to the content and it would automatically scroll if needed. But Flash doesn't seem to do that. It seems that you are stuck with 1 size and you have to work around it. But I don't know what size that is supposed to be. Sorry for the long rant. Just getting really frustrated. I'm using Flash CS4 if that helps any as well.

if you want to use 100%x100% and not have your display objects resize, set your stage's scaleMode to noscale. check the stage properties for your actionscript version for exactly how to do that.

Flash CC Brush Tool abruptly stops drawing when stage size is small

When using the Brush Tool, I'm having an issue that the stroke I'm drawing will abrupty cut off at a certain point on the screen (roughly halfway down the monitor, it doesn't relate to the canvas position or any coordinates). This seems to happen when I have the Stage size set to a smaller size (64 x 64 pixels for example). I've been able to reproduce the same behavior on multiple files, and on both a Windows 8.1 machine and a Windows 7 machine, both using the up-to-date version of Flash CC. Both machines are dual monitor, I'm not sure if that plays a factor in this.
To reproduce:
1. Create a new FLA in Flash CC and set the stage size to 64 x 64 pixels.
2. Use the Brush Tool and attempt to draw from the top to the bottom of the screen (zoom level and position on the canvas does not matter, as long as your cursor is going from near the top of your monitor to the bottom of your monitor).
3. The stroke will abruptly cut off mid-drawing at a certain point on the screen, roughly half-way down. You can continue to draw and move upwards and it will reappear when it crosses this barrier again.
This does not happen if the stage size is set to something larger (640 x 480 for example). This also does happen in Flash CS5 or CS6, and have only noticed this happening in Flash CC.
This is happening using the mouse for drawing, and also happened when I tested it on a different PC with a Wacom tablet attached.
Is this happening for others as well, and is there any fix for this behavior? (aside from always using a large stage size)

Hi All,
Just want to update you all that the latest Flash CC 2014 release(14.0.0.110) has the fix for this drawing issue.
This release also features
* New and improved Motion Editor
* SVG export
* WebGL for animation
* Variable Width Tool
* Tweening for variable-width strokes
* Object-level Undo
* Export as Projector
* HTML5 extension support
and much more...
To know more about what's new and exciting in Flash CC 2014, please visit
Flash CC 2014 Overview : Animation software | Download free Flash Professional CC trial
Flash CC 2014 Blog Post : http://blogs.adobe.com/flashpro/2014/06/18/flashprofessionalcc2014/
Thanks!
Mohan

Stage Size Issues in Director 11

Is there a maximum stage size in Director 11? I have set my
stage size to be 6144 X 768, in order to span 6 monitors for a
theatre project. I have used 3 monitors before, with no problem in
early versions of Director. Everything works fine while working on
the movie, but when i quit Director, I am unable to open director
again, unless I delete all the preferences and start with a single
monitor stage size.

IIRC there is a legacy bitmap dimension limitation of around
4096, so I
wouldn't be surprised if the stage also has something
similar.
You could develop separate windows (MIAW files) and display
them at
particular locations/dimensions

One Size Fits All? (Stage size for best display on iOS and Android)

I'm beating my head against the wall trying to find the one proper stage size that will accommodate all iOS devices and all Android devices adequately.
I've been following Colin Holgate's informative posts and am using the stage.scaleMode = StageScaleMode.NO_BORDER; approach.
However, I'm not sure what I should be setting the dimensions of my stage to, as the suggestions I found of Colin's seem to be prior to the release of iPhone 5 and the iPad retina display.
Can anyone recommend a stage size that would work best in trying to accommodate the wide variety of devices out there?
Many thanks in advance!
Mike

Maybe I'm missing something here, but isn't this an easier way to place a button in the top right (assuming center point is in top left of button)?
button.x = stage.stageWidth - button.width;
button.y = 0;
edit: I suppose that doesn't apply to show_all. I'm used to using
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
We've done this with banners at the top and bottom. If you design a banner for a specific aspect ratio, you can do something like
banner.width = stage.stageWidth;
banner.scaleY = banner.scaleX;
This causes the banner to fill the width of the screen and change height proportionately. If you want to have more control over the elements in the banner, something like
banner.background.width = stage.stageWidth;
var newHeight:int = stage.stageHeight / 8;
banner.background.height = stage.stageHeight / 8;
banner.buttonBack.height = newHeight;
banner.buttonBack.scaleX = banner.buttonBack.scaleY;
banner.buttonBack.x = banner.buttonBack.y = 0;
banner.title.height = newHeight / 2;
banner.title.scaleX = banner.title.scaleY;
banner.title.x = banner.buttonBack.x + banner.buttonBack.width * 1.2;
banner.title.y = newHeight / 2;
etc
This might not be what you're looking for at all, but I find it works well for resizing.
When asked to convert a fixed-size iPad app to one that dynamically resized for Android devices, we found it infeasible to completely recode the app in the time required, so we mixed dynamic resizing like above with throwing lots of objects into an empty MovieClip and scaling the MovieClip to fit the current stage size. This didn't hurt performance much, even when running graphics designed for the iPad's 2048*1536 retina display on much smaller screens.

IPad photos sort by size, largest disk size to smallest?

iPad photos sort by size, largest disk size to smallest?

PS. I searched for exact phrase "sort iPad photos by size" on Google and I am aghast that there were ZERO RESULTS.
https://www.google.com/search?site=webhp&ei=yEsuU9nNGYzkoASmmILoBQ&q=%22sort+iPa d+photos+by+size%22&oq=%22sort+iPad+photos+by+size%22&gs_l=mobile-gws-serp.3..0i 22i30.19488.31073.0.31755.19.19.0.0.0.2.350.3389.0j15j3j1.19.0....0...1c.1.37.mo bile-gws-serp..2.17.2771.LsiZBTPRvQk

Edge Animate Stage size in Dreamweaver fluid grid

I have developed an animation and have almost everything scaling and resizing acceptably in a Dreamwaevr template...except the stage.
In Edge animate I have a stage size that is 1212px x 400px. When the animation is viewed on a PC all the dimensions are fine, but when viewed in tablet or mobile phone, the vertical height remains at 400px... which leaves an enormous gap between the bottom of the animation and the next div.
I have set the stage dimensions to %, and have turned on the "link width & height" switch, and the stage still does not respond in vertical height.
How can I get the stage to respond vertically with a fluid grid layout in Dreamweaver?
I also note that every time I open up a previously saved Edge Animate file, the stage automatically opens the file at 550x400px, instead of the correct dimension for that animation, so that I have to then reset the stage size to what is correct for that animation... ..any reason this may be so?
Thanks,
Glen.

Thanks for your reply. You're right about most people not resizing their viewport during a session, but unfortunately the problem exists whether the screen is being resized or not. Refreshing the screen doesn't solve the problem.
The width of the div adjusts to the width of the screen as expected and the Edge Animate composition inside it does too, but the height of the div doesn't adjust. As the animation gets smaller to fit the width, the height of the div that contains it remains the same, leaving empty space at the bottom of the div. What is needed is for the div to scale to fit the page width proportionally. Instead, only the width is adjusting.
So I guess I need to know if there's either a way to force the div to scale proportionally or a way to tell it to adjust to the animation that it contains.

Largest Stage Size Possible In FP 10

Similar Messages

Maybe you are looking for