Laser jet 1022 not printing

I'm operating Windows 7 and reinstalled deivers to my Laser Jet 1022. It prints form adobe and MS Office applications, but not from
email (aol) or internet screens. When not printing an error message shows "unexpected call to method or property access."

Did you resolve this? I an having the same problem (on my Windows 7 laptop)

Similar Messages

Laser Jet 3050 not printing receipt

Sending a fax, does not print a receipt so I know it went through. Checked the manual but no obvious answer. Went through all the menu items but no luck. Anyone have an idea?

Did you resolve this? I an having the same problem (on my Windows 7 laptop)

Hp laser jet 1018 not printing. cable/power are connected and have paper. no blinking lights.

What do I do next? The spool File is started and the print spool temporarily displays the file in the printer spool box but nothing is happening on the printer. It's not even trying to print

Did you resolve this? I an having the same problem (on my Windows 7 laptop)

LASER JET 1022N NOT PRINTING SINCE SWITCH OFF

THERE WAS A LARGE PRINT RUN SET UP IN ERROR AND THE PRINTER WAS SWITCHED OFF TO STOP THE PRINTING AS THE REQUEST HAD CLEARED THE COMPUTOR CONTROLS IN PRINT. NOW THE RED LIGHT FLASHES AND NO PRINT, I HAVE BEEN UNABLE TO CLEAR THE MEMORY. THE PLUG AND NETWORK CABLE HAS BEEN DISCONECTED, COMPUTORS HAVE BEEN REBOOTED BUT IT MAKES NO DIFFERENCE. OTHER PRINT REQUESTS DO NOT TRIGGER OFF A RESPONSE. THE RED LIGHT STILL FLASHES.
HELP WOULD BE APPRECIATED
JOHN
3 SEPT 09

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Hp laser jet 1022 won't print with my new hp envy 8.1 operating system

My new hp envy 8.1 operating system won't print from my hp laser jet 1022 printer. I have downloaded the driver and it seems like it's not acknowledging the USB cord.

When you say " my new hp envy 8.1 operating system " ..... Does that mean possibly that you had windows 8 ,,, and have upgraded to windows 8.1 ? Or does that just mean you have a new computer and it Came with 8.1 ???
What is the Model of your computer?
The reason i asked.. because I searched for your HP Laser Jet 1022 Drivers, and when i found them, i selected "more details" and it states " This full software solution is the same solution as the in-box CD that came with your printer. This is not a software upgrade. If a prior version software is currently installed, it must be uninstalled before installing this version. "
Sooooo.. if you had windows 8, and then upgraded to windows 8.1, then you probably need to 'uninstall' any reference to the original installed software for the laser jet 1022.....
And you could also try to NOT get the Full software / driver option, and get the 'Basic drivers' ( you will notice a link for that under the download of the 'Full' software link....

HP Laser Jet 400 Color Printer won't print from my mac but will from others on the network.

My HP laser jet 400 color printer will not print from my mac except when I send a test page. The other printers on the network are printing with no problems. Has anyone else had this problem? Help?

Hello ElizabethF,
Welcome to the HP Forums!
I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Where can I get an HP Laser Jet 5 Basic Printer driver

Where can I get an HP Laser Jet 5 Basic Printer driver, besides using the windows Update button.

Here is the product page for the Laserjet 5p/mp page. This will be the best place to find what you need. If it is not listed here, then the only other place to get the driver is through windows update.
Laserjet 5p/mp
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Laser Jet CP 1525 prints everything too dark. All cartridges OK. How can I lighten the print?

Laser Jet CP 1525 prints everything on paper too dark. All cartridges OK. How can I lighten up the print? Where can I adjust brightness?

Checked with the support service ... Cannot be adjusted. Suggested solution: try different driver; Did not work, no change. Thank you, HP. Once my cartridges run out, a new printer will be bought. Not HP. Promise.

HP laser jet P3005 PCL6 printer ( without DIMM or SIMM device)

Hi folks,
HP laser jet P3005 PCL6 printer ( without DIMM or SIMM device) can print barcode from smartform or not ????
i can see the barcode in print preview but can not see the barcode in print??
plz advice. it's urgent.
Thanks
pabitra

Just call to customer service of printer company ,you get more information.
if you get barcode in print preview ,if not in printer then you must install other devices.
Thanks
Seshu

My hp laser jet 4050N stopped printing. What can I do?

My hp laser jet 4050N stopped printing. What can I do?

1. Please provide the year model of your iMac and which OS X it is running.
2. Reset your Printing System,
for 10.9 see > OS X Mavericks: Reset the printing system
for 10.8 see > OS X Mountain Lion: Reset the printing system
for 10.7 or earlier see > Mac OS X: How to reset the printing system
3. Test your printer, try printing from a different computer.
4. Go to HP > Troubleshooting Guide for Laptops, Printers & More | HP ® Support

I am running Windows365 and I can't get my laser jet 2015 to print. It is labeled as "offline".

I am running Windows365 and I can't get my laser jet 2015 to print. It is labeled as "offline".

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - LaserJet.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Laser Jet CP1025nw: Duplex printing not available from Mac

I just bought a new HP Laser Jet CP1025nw printer and have installed it for wireless use. When trying to print from my Mac (OS X 10.9.3) the option for (manual) duplex printing is not showing up (greyed out) in the print dialogues in applications (e.g. Microsoft Word, Adobe Acrobat Pro).
How can I get duplex printing workingfrom my Mac?
Thank you!
This question was solved.
View Solution.

Cool! That worked for me! Thanks!

Fix for hp laser jet CM1312nfi MFP printer and OS X 10.10.2

My HP CM1312nfi MFP laser jet printer, with the latest driver 1.5.0, will only print with my iMac OS X 10.10.2, I cannot scan at all, even with image capture the scanner does not work or show up. My wife's Mac Book is running 10.9.5 and printer driver 1.4.1, she can scan with hp scan but only with the flat bed scan not the tray feeder. I can't find a download for the older driver to try that.
Very frustrating to have a perfectly good HP MFP printer that seems to no longer be supported by the manufacturer!!! The printer is working fine with the PCs in the house.
Does anyone have a fix for this?

Hi ShlomiL,
Thank you for your answer.
I'm aware of the download you pointed out, but my question was different.
I asked why the new version provided to Apple from HP (and from Apple to the customers) won't work as intended anymore. Until few days ago, all I had to do was plugging in the USB cable and my Mac would install all the required software, without all the additional packages I would not like to have.
I wanted to contact Apple but the software is made by HP, so I thought HP should know about compatibility issues. I know this is a community board but I wouldn't know how to get in touch with the Mac software makers.
If the issue won't be risolved I might just try and install the package from this website, but that would not be a fix for a problem recently introduced and that I thought I'd point out.
Thanks again,
Mario

HP Design Jet T1100 not printing correct size

Not sure if this is the right section to post
Ok, we have a HP Design Jet T1100 colour printer in ouir office.
When I click file, print, properties etc and change it to A2 or A1 for example it still prints out on A0.
I've tried calling Helpdesk but I'm normally on the phone to them for a hours explaining the same problem to them over and over again. The only thing they've done is send a firmware update on a CD which didn't help.

"The HP website mentions a driver for OS 9,"
They also list Mac OS X drivers...updated 7/21/06
"Is there anyone out there who can give me a basic tutorial in what to look for to determine compatibility of the printer with the MacBook"
Just look for Mac OS X drivers

Desk Jet 810C Not Printing Magenta

I need some troubleshooting help.
Months ago, my black ink cartridge started to empty and the printer started using reds or blues. I replaced the black cartridge with a refurbished one from Office Max. All worked fine.
The color cartridge started to empty a few months later, so I again went to Office Max and obtained a rebuilt color cartridge. I rarely print in color, but at times, after scanning a document on my HP scanner, when it printed it was in blue and red again. This was when I hit the "scan and print" button on my scanner. If I saved the scan as a PDF, it would print fine in B/W.
Now, the printer will only print black, yellow and green. The red/magenta will not print at all.
I did a head cleaning. I also did a "prime" maintenance function, with the same results. I even unplugged the printer, removed the cartridge, reinstalled it, and there was no change (this was the advice from someone on fixya).
Any ideas from anyone, other than trying a new cartridge?
Thank,
Mike

The quality of reman cartridges varies greatly (see here for a study). You will likely have much better results using HP cartridges.
It may be possible to recover your cartridge by soaking the printhead nozzles down in 1" of very hot water for about 10 minutes.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Laser jet 1022 not printing

Similar Messages

Maybe you are looking for