Laser Jet P1008 - Very Bad Performance

I have been using HP LaserJet P1008 since 06th june 2008. It worked very nicely during the 2 months only. after that it started to show some problems. we changed its Toner atleast 3 times due to poor quality print outs. Now a days,apart from poor quality print outs,the printer is not respnding on time to the print request.To get a single page print out we need to wait for long time.I tried many times to rectify the problem by calling a technincian, but the thing is still not working properly. What should I do to fix this problem? Is there any option to exchange this printer with a better one by giving additional amount? Thanks

1GHz AMD Dual-Core E1-2100 APU processor is a big let down, whichever brand laptop it is.
Actually, 1GHz is the minimum requirement for Windows 8/8.1 Operating system.
It is the bottlenecking factor for the bad performance you're getting. And the processor is not replaceable also unless you're going for the whole board replacement -
http://h10032.www1.hp.com/ctg/Manual/c04162986.pdf
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

Laser Jet 1020 will no longer print Internet/email. Error message is res://ieframe/dll/preview.js

Laser Jet 1020 used to print just fine from internet explorer. Suddenly it quit printing and I get an error message res://ieframe.dll/preview.js The bottom of the error message asks if I want to cancel script. Prints fine from other windows applications. From the Internet, the correct printer is selected? Any suggestions?!
Laura

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Run the HP Update Tool from Start Menu > All Programs > HP if your printer installs it, rebooting afterwards if necessary.
7) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Fix for hp laser jet CM1312nfi MFP printer and OS X 10.10.2

My HP CM1312nfi MFP laser jet printer, with the latest driver 1.5.0, will only print with my iMac OS X 10.10.2, I cannot scan at all, even with image capture the scanner does not work or show up. My wife's Mac Book is running 10.9.5 and printer driver 1.4.1, she can scan with hp scan but only with the flat bed scan not the tray feeder. I can't find a download for the older driver to try that.
Very frustrating to have a perfectly good HP MFP printer that seems to no longer be supported by the manufacturer!!! The printer is working fine with the PCs in the house.
Does anyone have a fix for this?

Hi ShlomiL,
Thank you for your answer.
I'm aware of the download you pointed out, but my question was different.
I asked why the new version provided to Apple from HP (and from Apple to the customers) won't work as intended anymore. Until few days ago, all I had to do was plugging in the USB cable and my Mac would install all the required software, without all the additional packages I would not like to have.
I wanted to contact Apple but the software is made by HP, so I thought HP should know about compatibility issues. I know this is a community board but I wouldn't know how to get in touch with the Mac software makers.
If the issue won't be risolved I might just try and install the package from this website, but that would not be a fix for a problem recently introduced and that I thought I'd point out.
Thanks again,
Mario

Laser jet pro CM1415 will not send or receive faxes

I just bought a MAC OSX 10.9.5 and downloaded upgrades for my laser jet pro CM1415fnw printer plus the firmware upgrade from HP website. The printer will scan and print but will not fax. we are set up for wireless and I have spent the last 2 days trying to figure this out. The message says that no phone line detected. ??? This printer worked perfectly with my old MAC computer but is bing very obnoxious now.
Thank you for any help you can give me. collette

Hi @dumtech ,
I see that you are unable to fax with the new Mac using 10.9. I can help you with this.
Did you mean you downloaded and installed the Full Feature Software drivers?
HP LaserJet Pro CM1415 Color Multifunction Printer series Full Feature Software and Drivers.
Are you trying to send a fax from the Mac or from the printer's control panel?
If you can't fax from the Mac, try the following:
Check to see if the fax driver is installed.
Click the Apple menu, and then click System Preferences.
Click Printers & Scanners.
If not, the + sign.
Select the printer from the list.
Beside USE: make sure it lists the printer's name only/fax.
Click on the add button.
Check the driver name that is installed for the printer. Make sure it shows just the printer's name also.
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Try faxing again.
If you can't Fax from the Printer, please try these steps:
Make sure you are using the 2 wire fax cable.
Run this test for the fax.
From the Home screen, touch the wrench button.
Touch the service button.
Touch the Fax service button.
Touch run fax test.
You should get 4 passes.
Turn the private receive off:
Go setup/fax setup menu/advanced setup/private receive/turn it off.
Turn off the error correction:
Go setup/service /fax service/error correction/turn it off.
Change the fax speed to medium:
Go to setup/fax setup /advanced setup/fax speed/change it to medium.
Clear the saved faxes:
Go to setup/service menu/fax service/clear saved faxes/OK to clear.
If you are still having issues, then please follow the steps in this document.
Cannot Send or Receive Faxes.
Can you fax from the printer?
Was the fax and printer driver both installed?
Were you able to fax from the Mac?
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My Laser Jet Pro CM1415fnw color - will not print ... WILL let me fax...

My Laser Jet Pro CM1415fnw color - will not print ... will let me fax... then it goes to a screen like it is thinking ....the screen shows HP.... enerystar.... and a white bar on the bottom ...then it "initializing" and acts like it wants to print something. Help

Does the printer ever come to "ready" or Home screen? If it does not then i would recommend calling support and they may be able to help you with restoring the device to factory settings. If this is constantly occuring every time you boot you may want to try upgrading the fw to the latest version. Also if it is just showing "Calibrating" very frequently in the Embedded WebServer (EWS), navigate to IP if you have it, in the "System" , "Print quality", you can can change the calibration timers and see if that helps.
I am an HP Employee.

Error's message on HP laser jet 4

I have an very old HP Laser Jet 4 printer.
It was working excellent until it started to just give me lines across the paper...
Then it would print out an empty page...then print my material.
NOW...it just keeps stating ERROR 52?
Does anybody know what that means?
I do not own a booklet on this printer and hate to have to purchase a new one since it has been the best!
Also just put in a new cartridge to see if that my help. Not.
Help?

From an old service manual:
52 ERROR Scanner Malfunction
The scanner motor is a flat, brushless, DC motor. Motor operation
is completely controlled by the DC Controller.
The scanner motor is enabled when the printer is powered-up
(during the printer’s power-on self test), or whenever the PRINT
command is received by the Formatter PCA. The scanner motor
makes a distinctive sound when starting. The sound can be
described as a “variable pitch whirring” sound. Listen for the
sound of the scanner motor when troubleshooting the 52 ERROR.
Laser/Scanner Assembly Functional Checks
Initiate a Self Test. As the test begins, listen for the sound of the
scanner motor. If the motor cannot be heard, perform the
following in the order given:
1 Check the Laser/Scanner and the Power Supply cables. Replace if necessary.
2 Replace the Laser/Scanner Assembly.
3 Replace the DC Controller.

Unwanted noise when printing in laser jet 1018

I've been using laser jet 1018 for many years and all of a sudden it starts screech when printing. What can I do to stop this?
If there is nothing to do but buying a new printer which other printer uses the same same toner cartridge?

Hello magistern,
Welcome to the HP Forums.
The noise that you are experiencing could be cause by many different scenarios. The basis troubleshooting would include making sure the printer power cable is connected directly to a wall outlet and not a power bar/strip. Taking a light weight lubricating oil and applying very little to the gears.
I realize that you have had this printer for some time. If you would like to see about some out of warranty options, I suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How do I use my HP Laser Jet 4M printer work with my OS 10.9 MacBook Pro

A "newbie" here. I am having trouble getting my new Macbook Pro and its 10.9 OS to accept my HP Laser Jet 4M+ printer. HP apparently does not support the Mac's OS10.9. Any help appreciated.

Ok, I've downloaded the drivers as suggested.but still not printing as it should.
It's now printing one page as opposed to many, but it still has the jargon on top of the page as depicted in my original post?
From this info you advised, it does suggest, does it not, that the HP Laser Jet 6p is supported.
Meanwhile, any other advice.
Regards

Fios Internet connection is very bad! Please help!

Hello,
I play an online game called Final Fantasy XIV. I use a program called WTFast in order to have a solid gaming experience, one without or very little lag or disconnects.
Recently, within the last 3-4months, I have noticed I get EXTREME lag and DISCONNECTS. I contacted WTFast with a tracert that they analyzed, and here is their response:
"Your internet connection is very bad. There is a "plateau" spike. This will cause WTFast to spike as well, and for such a long "spike" it is not surprising that the connection was dropped.
The previous report showed a very unstable internet connection as well (the one where you got a 30 second freeze).
Present the same reports you sent to us to your ISP (Verizon FIOS) and ask them to try to make their connection better. The report will help them see the quality of the current connection."
Here is the information in the more readable form (except for the last four as I figured you would probably get the idea by then). Yes, 4 shows 100% packet loss, so the connection dropped then. Also, in 5 the standard deviation is high (16.35 ms) which indicates a huge fluctuation in the signal. The flux column also shows large numbers, which indicates a large variance in the signal speed. Finally, there are a lot of hops just within the ISP, ie rows 2-8, and all this data is for the ISP itself, not the WTFast connection. In fact, that connection is the last one, and there you can see good numbers. Hope this helps.
015-02-25 00:09:36
Hop Name No. Loss % Sent Received Best (ms) Avg. (ms) Worst (ms) Last (ms) Spikes Flux (ms) Std.Dev (ms)
Wireless_Broadband_Router.home 1 0.00 497 497 0 0 12 0 0 0 1.67
lo0-100.PHLAPA-VFTTP-304.verizon-gni.net 2 0.00 497 497 3 8 84 7 4 72 8.39
T1-1-0-5.PHLAPA-LCR-21.verizon-gni.net 3 0.00 497 497 4 8 19 9 0 0 2.51
—— 4 100.00 —— —— —— —— -1 —— —— —— 0.00
0.so-6-0-1.XL3.IAD8.ALTER.NET 5 0.00 497 497 10 19 137 12 12 92 16.35
TenGigE0-6-0-4.GW1.IAD8.ALTER.NET 6 0.00 497 497 11 18 50 18 0 0 4.68
teliasonera-gw.customer.alter.net 7 0.20 497 496 12 24 43 27 53 30 3.80
cloudflare-ic-309918-ash-b2.c.telia.net 8 0.00 497 497 10 14 46 13 0 0 3.04
Target WTFast.com 9 0.00 497 497 9 12 25 12 0 0 1.94
February 25, 2015, 11:56
I did a tracert from my computer to sites like MSN.com; Verizon.com etc, and EVERY SINGLE 4 shows a 100% loss. I did the same tracert from my computer at work that uses a different IP provider, and those same sites show a response from 4.
Can anyone help me out with this please! Thank you for reading!

bap4201 wrote:
I'm trying to, but can't seem to format it properly
Open a command prompt and enter the tracert command
then select the cmd prompt icon - top left of the cmd prompt window
select edit, mark
highlight the data you want to copy - the tracert data
select the cmd prompt icon again
select edit copy
put the cursor in the post window in the forum
and hit ctrl-v - as below
C:\Users\Peter>tracert wtfast.com
Tracing route to wtfast.com [190.93.243.228]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms Westell [192.168.1.1]
2 3 ms 2 ms 3 ms L101.BSTNMA-VFTTP-66.verizon-gni.net [96.233.107
.1]
3 7 ms 6 ms 6 ms G102-0-0-3.BSTNMA-LCR-22.verizon-gni.net [100.41
.212.48]
4 3 ms 3 ms 3 ms so-5-0-0-0.BOS-BB-RTR2.verizon-gni.net [130.81.1
51.220]
5 11 ms 12 ms 10 ms 0.ae11.XL4.NYC1.ALTER.NET [152.63.20.117]
6 * * * Request timed out.
7 37 ms 28 ms 43 ms 3.et-2-0-1.TL2.NYC1.ALTER.NET [140.222.227.34]
8 20 ms 21 ms 23 ms TenGigE0-7-0-1.GW5.NYC4.ALTER.NET [152.63.17.66]
9 12 ms 10 ms 11 ms teliasonera-gw.customer.alter.net [152.179.163.1
78]
10 13 ms 13 ms 11 ms nyk-bb2-link.telia.net [213.155.130.244]
11 11 ms 11 ms 12 ms nyk-b2-link.telia.net [213.155.130.30]
12 12 ms 17 ms 19 ms cloudflare-ic-309915-nyk-b2.c.telia.net [62.115.
52.174]
13 11 ms 12 ms 11 ms 190.93.243.228
Trace complete.

The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance

The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance

Also it was not and never has been jailbroken if that helps.

Help, Upgraded to Yosemite and now my HP Laser jet 1320 printer will not work!

Two days ago I upgraded to Yosemite on my Imac. Now my HP 1320 Laser jet will not print at all!!! I need a printer for my eBay business ASAP and this is not good. The printer is a driver version 19.8 Is it compatible with the new program? I am so frustrated.

Hello k1watt,
Thanks for using Apple Support Communities.
From your post I see that you're unable to print to your HP LaserJet 1320 series after upgrading to Yosemite on your Mac. I defintely understand how frustrating this is, especially since printing is vital to your business. The printer driver version 19.8 is the most current version available. To troubleshoot the issue however where you're unable to print, please follow the steps in the article below.
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel.Note:If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
UseSoftware Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Deletethe affected printer, thenaddthe printer again.
If the issue persists, try these additional steps:
Resetthe printing system, then add the printer again.
If the issue still persists,resetthe printing system again. Download and installyour printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Troubleshooting printer issues in OS X - Apple Support
OS X: Printer and scanner software available for download - Apple Support
Take care,
Alex H.

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
== URL of affected sites ==
http://http://www.facebook.com (always) and www.YouTube.com (sometimes)

There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
Brianeng

OS Windows Vista Ultimate - HP LAser Jet 1000 - Firefox will not print out internet page etc...

OS Windows Vista Ultimate - HP Laser Jet 1000 - Firefox will not print out internet page etc...
That simple, find an page you want to print, hit the print button and zero zip zlich.
Works just fine with IE?????

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

All in one HP Laser Jet Pro 200 Color MFP (M276n) stopped working

I have an HP Laser Jet Pro 200 Color MFP (M276n) that I had installed and woking fine.
I changed my desk and removed the USB from the computer and when I plugged it in again i could not print or use any of the functions through the computer. I'm running 64bit Win 7.
I've tried unistalling the printer and downloading the laster driver package from HP.com.
But when I try installing it and come to where the installationprogram want me to connect the USB-cabel the printer doesn't show up (I can't click "Next" to begin installtion).
So right know I cant print and I can't reinstall the printer.
How do I fix this??

Make sure the usb cable is plugged in properly, the right port at the back of the printer. If still doean't work, maybe get a new usb cable?

Laser Jet P1008 - Very Bad Performanc​e

Similar Messages

Maybe you are looking for

Laser Jet P1008 - Very Bad Performance