Laserjet 1018 paper feed problem - started suddenly and now wrinkles paper but does not feed it in
This HP Laserjet 1018 is 4 years old, has worked flawlessly. But a day or two ago it fed a sheet of paper, there was a ripping sound, and the paper emerged, printed, but with a 1/4" wide, 5" long missing bit near the bottom, running the long way of the paper. I found and removed the crinkled up torn strip of paper, and have restarted this printer numerous times. Since that incident, it refuses to feed paper correctly, but bunches it up and wrinkles it a bit from the left to right and does not feed it in. Thus, won't work. I can't see any broken parts or anything stuck inside -- and taking this printer apart is v. complicated -- no easy panel to remove to see the feed mechanism. I'm doubtful I can take it apart enough, and still get it back together. I've cleaned the feed roller (small half-round gray rubber thing) and it does not seem to be the problem.
Questions:
a) anyone experienced, and solved this problem?
b) is it worth trying to send this for repair (I got it on special for $69, and the replacement equivalent now appears to be the HP P1102w, which is selling via Amazon for $94.99
Thanks
Hi. Thank you for your post.
The following link at the HP Customer Care web site may provide some help on the paper feed issues you are seeing.
http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=110&prodS...
Although I am an HP employee, I am speaking for myself and not for HP.
Similar Messages
-
I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unablesend any email with my iMac ( i can recieve email) . This problem started suddenly and the error message i get is error 5.7.8. I have read the threads on line and went into settings, even created a new profile, nothing helps...Please advice..is this something to do with my keychain Access?
As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums -
I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?
This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl -
I downloaded ios7 to my iphone and now my volume control does not work 99% of the time. Is there something I need to do to correct this?
Adjust the Volume Control in Control Center, or try a RESET.............
-
Just upgraded to iTunes 10.6 and now it says it does not support Quicktime
Just upgraded to iTunes 10.6 and now it says it does not support Quicktime. Not much more to add. It's a MacPro running Lion.
warren.b.paul wrote:
So, I have managed to fix the problem.
I found that the upgrade had replaced my library files with empty ones.
So I restored the backup I made of them before the upgrade and
now all my media is back.
Great..
For those who run across this therad and haven't taken the effort to make a backup here is another approach that should work.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated. -
I have an Ipod touch 4th generation 8gb and it comes on but does not go past the apple logo
I have an ipod touch 4th generation 8gb and it comes on but does not go past the apple logo. What do I need to do?
This problem happened to me a month ago. The way I used to fix it:
1. Go it DFU Mode. For going into that, check this page.
2. Connect your iPod to your PC which has iTunes and iTunes will detect your iPod in recovery mode.
3. Press Shift + Restore if you have the .ipsw firmware file downloaded on your windows PC or just click Restore and follow the instructions to download the firmware file.
4. Wait and finally you're done! -
I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?
The sound seems very faint but can here static on playback.
-
I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes. There is no 'Devices" category on the bar at the left
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?
Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I generated a new Itunes Account and now the App sync. does not work with the apps I bought with the old account. Is it possible to merge the old and the new account ?
It is not possible to merge Apple IDs.
Why did you create a new one? -
Updated to IOS 7.1 and now my "Call Waiting" does not work, nor will the "Call Waiting" indicator stay on..... Any help?
Settings > General > Reset > Reset Network Settings
-
TS3716 installed the new itunes and now my ipod nano does not show in the device menu
installed the new itunes and now my ipod nano does not show in the device menu
There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them: -
I updated to 6.1.3 on my iPaad 1, and now my app store does not work. What should I do?
I updated to 6.1.3 on my iPad 1, and now my app store does not work. What should I do?
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
Having start up problems, keyboard light and loudness adjustment via keyboard does not work
Often if I start my MacBookPro 13" with Lion it starts up and is than blocked. I can not open the finder nor starting any programm. The turning wheel never stops and I have to restart the book by pressing the on/off button for a long time. Sometimes I need to do that several times till it runs stable.
During this week I experienced in addition that the keyboard light is not working anymore and also the loudspeaker adjustment does not work via keybaord. Only via menu bar.
Any idea what's going on with my book?Read these two links from the Apple support files:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379
Good luck.
Ciao.
Maybe you are looking for
-
Problems with Audio Sync and Rendering
In both problems what happens is NOT consistent. If were, would think was a setting or something I was doing wrong. About the rendering problem. I capture either through FCP Log and Capture or through my analog to digital "box", Formac Studio TVR. In
-
How to create a group of devices in MARS
Hi folks. I have quite a list of devices which MARS pulls syslog from and the client's security policy requires to run periodic queries against those devices (they are 871 routers). Is there any way to create a group of devices and add it to the "Rep
-
What is the current firmware for iphone 3g?
What is the current firmware for iphone 3g?
-
In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications? I've tried everything to get a custom umask set for all apps. It just seems impossible... Is there a replacement for launchd-user.c
-
Photoshop auto saving images from internet?
I've just received an image through an email which when I opened it automatically opened in my Photoshop album (only starter edition 3.0), however when I clicked to view the next image I saw an image I had randomly viewed on the bbc site half an hour