Laserjet 1022 w error to wireless internet connection

I installed my wireless laserjet 1102 w.
It is running, I am able to connect by wireless to the printer and I am able to print but when
I connected to the page of configuration and try to activate the eprint option I receive the message "error to internet connection".
So I am not able to receive the printer code to activate eprint.
My wireless internet connection is correcly running with other wireless devices

Hello guidogio55,
Please take a look at this document, and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • "Connection error. Check Internet connection." when trying to Enable Web Services on HP 1606dn

    Error message "Connection error. Check Internet connection." when trying to Enable Web Services on HP Laserjet 1606dn.
    Operating system: Windows 7
    Thanks for helping,
    Howard
    UPDATE 21-7-13: After upgrading the firmware to the lastest version, I could enable web services. Big help was this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw
    This question was solved.
    View Solution.

    Hi,
    Please try the following.
    1. Open an internet browser type printer's IP address.
    2. Should bring you to the printer's status page.
    3. Select the networking tab at the top.
    4. Left hand side select IPv4 under wireless.
    5. Under DNS address Configuration select Manual DNS Server.
    6. For Preferred enter 8.8.8.8
    7. For Alternate enter 8.8.4.4
    8. Select apply. You might get a warning saying this could interrupt connection that's fine.
    9. Turn printer off for about 30 seconds then try again.
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • For those who constantly lose their wireless internet connection using WRT54G

    Ok I was constantly losing my wireless internet connection on my LAN network when using my laptop, I tried everything to no avail,until today. Heres what I did to solve my problem
    1. Upgrade your firmware for the WRT54G to ver.6
    2. Reset your wireless router
    3. Unplug all cables and wires from your Pc and router
    4. Connect your Pc directly to your cable modem and obtain an internet connection
    5. Now transfer files you want to keep from your laptop onto a usb flash drive or burn them to a disk
    6. Reformat your laptop so that it goes back to all factory settings just like when you bought it
    7. When completely done reformatting run software that came with the WRT54G on your desktop pc and follow all instructions,when prompted to type password type the password you last used
    8. Go to your laptop and it should pickup a LAN,click connect, it will ask for the encryption key so type it in(whatever you typed when re-installing your wireless router)
    Congratulations you are now back up and running,install files saved earlier back on your laptop and enjoy.This is what I did and it solved my problem as a matter of fact i typed this from my laptop and has not dropped my wireless internet connection yet.
    NOTE SAVE ANY AND ALL FILES YOU WANT TO KEEP AS REFORMATTING WILL CAUSE YOU TO LOSE DATA!
    IAM IN NO WAY RESPONSIBLE FOR ANY ERRORS OR PROBLEMS THIS PROCEDURE COULD CAUSE IF DONE INCORRECTLY!

    If you bought a version 5 or 6 return it to where you bought and apply the money towards a WRT54GL v1.x  You'll be much happier.  You could spend time online rather than pulling your hair out trying to figure out whats wrong.  I setup 6 Linux based WRT54G's with no issues before I was given the task of setting up a version 6.  Worked for about an hour.  Told the guy to return it for a GL.  Long story short, set it up in a matter of minutes and he was online.  That was 3 weeks ago and he is very happy.

  • My itunes wont download the newest ipod software and when i try it will download for maybe an hour then say "error has occured, internet connection timed out"  now what do i do?

    My itunes wont download the newest ipod software and when i try it will download for maybe an hour then say "error has occured, internet connection timed out"  now what do i do?

    Disable your firewall/security software, then try again.

  • ITunes 8.1 works great but killed wireless internet connection

    I installed version 8.1 on both my laptop( PowerBook g4/ OS 10.4.11) and desktop (imac intel / OS 10.5) and after restarting the computer, the wireless internet connection stopped working on both.
    I would open Safari and it would be a blank page and and the circle would keep spinning.
    So I tried my laptop at a different wireless hotspot and had the same result.
    I then tried repairing permissions and I got a list of problems with iTunes/Network Utilities, they repaired and now when I open Safari I get the message that it can not connect to the internet.
    I do get an internet connection using ethernet on both.
    Any ideas on how to fix this problem?

    Did you by any chance also update the firmware on your Apple Airport Extreme (if that's what you have)?
    I thought 8.1 killed my connection to my Apple TV, but it was the faulty firmware (see reports elsewhere in these forums).
    Now that I have rolled back from 7.4.1 on my Airport I plan to try iTunes again (with white knuckles).
    -dan

  • IMAC Wireless Internet Connection Problems All Of A Sudden

    My Imac is well over a year and a bit old and has been able to connect to my wireless internet connection absolutely fine until the past week and a half. At first the connection wouldn't work and when I would turn my airport on and off and reset the router, it would eventually work, now that is not working at all. My airport status is either showing 'airport is turned on but is not connected to a network' or 'airport has a self-assigned ip address and may not be able to connect to the internet'
    I have formatted my imac twice and still no avail and the last format I tried to join wirelessly straight from boot but it wouldn't join saying 'there is a problem with the wireless connection and you're not connected to the internet.' the annoying thing is I can see the network sitting there and can't join it, my network is also unsecure so no need to input a password. All my home PC's and my Iphone and Blackberry find the network easily enough, although recently the Iphone has began showing only 1 bar of wifi connection.
    I am at my wits end as I am unable to connect at all now, I am all out of ideas and have been bashing my head off a wall for the past day without any connection at all.
    My router is a buffalo AirStation wireless G high power model, my IMAC is an intel core 2 duo 20", if you need anymore information of my hardware I will gladly provide it. I'm running MAC OSX Leopard 10.5, out the box as I've been unable to run any software updates as I can't connect to the internet.
    Please, if anyone can shed any light at all on this issue I would definately try anything.
    Thanks in advance and regards.
    Message was edited by: proxykillah

    Anytime you see a self-assigned IP address in your network prefs you know it surely is a problem
    with your router configuration. Power down all equip ... make sure modem is off for at least 5 minutes
    restart modem, restart iMac ... check your network pref on iMac and make sure it's not 169.x.x.x
    If so you will need to recapture the settings from your ISP's modem to the Buffalo.
    Always use a secure wireless connection (WEP, WPA, WPA2) or else the whole neighborhood will suck down your bandwidth the slow down what your paying for. I use Time Capsules or AEBS (Airport Extreme Base Stations) that allow you to stealth mode and lower signal output and make the device
    as a "closed network" ... meaning no one else can see and tap into your WIFI home network!
    802.11N is better than G. and especially when you can use dual bands 2.4 / 5GHz to stop various home interferences. The backup of Time Machine only makes life much easier also! Xtech

  • Firefox won't detect coffee shop wireless internet connection, but explorer will, automatically

    Firefox won't detect coffee shop wireless internet connection, but explorer will, automatically

    that's fine, thank you
    but if it doesn't connect
    what's the alternative procedure
    what do I do

  • Just downloaded 10.5.  It gives me a blank screen for the itunes store.  No error message.  Internet connection fine.  Have checked firewall.  Any ideas?

    I have just downloaded 10.5.  it gives me a blank screen for the itunes store.  No error message.  Internet connection fine and I have checked my firewall settings.  Any ideas?  Or is the store blocked because of ios 5 release today?

    I've had the exact same issue since late last night since I downloaded 10.5
    I'm also having problems backing up my iPhone, which I suspect is due to the same issue.
    I've tried all recommended solutions on forums and Apple support (deleting backups, restarting phone/computer, disabling/uninstalling third party security software, testing port connectivity) and none of them work.
    I will try japiohelp's solution and see if that does anything.

  • I want to listen to my music through my airport express but I also have a wireless internet connection!

    I want to listen to my music through my airport express but I also have a wireless internet connection!
    I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?

    David1854 wrote:
    I want to listen to my music through my airport express but I also have a wireless internet connection!
    I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?
    Do you mean to say you already have a wireless network setup and thought by buying the Airport Express you just could use it for wireless music alone?
    The Airport Express is chiefly a wireless router first, with the wireless music and printing as extra's.
    It can be used for streaming music alone, but I think it needs to talk to network time servers and thus it gets screwed up over time not being on the internet. Also by your using your computers wifi for music streaming, no internet with your other router.
    So it's a all Airport Express or back to a stereo mini cable.

  • Setting up a Wireless Internet Connection on Solaris 10

    I am new to the whole Solaris/unix world and I was just wondering how to set up a wireless internet connection with a solaris 10 machine. I have a linksys router hooked up to a cable modem and a linksys receiver hooked up via USB on the solaris machine. I would greatly appreciate any help anyone can give me.

    Was the router supplied by the ISP or was it bought separately? Are you able to get online when connecting the Mac directly to the router via an ethernet cable? Either way it's best to check the router settings to ensure they are correct.
    I’ve not come across the Zoom routers. Setup should be straight forward though, having gone to their website and downloaded the manual. Do the following:
    1. Plug one end of the RJ-11 cable (included in the box) to the router, the other end to your phone line via the micro-filter.
    2. Plug one end of the ethernet cable (again included in the box) to the appropriate port in the router, the other end to your Mac.
    3. Plug in the power cord and switch on
    4. Fire up your web browser on your Mac (Safari, Camino, Firefox etc)
    5. In the address bar of the web browser type 10.0.0.2 and hit the Return button
    6. A Network Password box will appear. This is to gain access to the router itself. The defaults are, Username = admin, Password = zoomadsl
    7. You’ll now enter the Basic Setup screen. It’s here where you enter the username and password supplied by your ISP. This is NOT your email username/password but your Internet access ones. If you are not sure or don't have them, call your ISP.
    8. Click Save Changes and then click Write Settings to Flash and Reboot. Once the router has reset itself and the Link light comes on and remains steady, you’re online.
    That’s it. Job done
    If you still cannot get access it may be worth resetting the router (there should be a small button in the back which requires the use of a pen or pencil to press) re-entering your ISP information as described above and trying again.
    Let me know how you get on.
    Kryten

  • Please, help me to set up wireless Internet connection. M...

             Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
    First, I can’t open password request screen on http://192.168.1.1. 
    Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail. 
    Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
    Tell me please: what’s the matter?

    Pensive wrote:
             Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
    First, I can’t open password request screen on http://192.168.1.1. 
    Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail. 
    Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
    Tell me please: what’s the matter?
    hi pensive ,
     Seems interesting , first do this -  push the reset button on the back of router .
    push it till 30 seconds , unplug the power cable and plug in the power cable back in After completion of 30 seconds.
    then try to log into , 192.168.1.1 again . with the password "admin".
    see if it reply?
    Else -
    strt>cmd>ipconfig /all - post the result ?
    pe@c3
    Message Edited by meteor on 01-09-2008 05:58 AM
    ~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

  • I have installed Adobe digital additions and have tried to aurthorize but keep getting error message "Connection error" . The internet connection is working and I do have an Adobe ID can you help please

    I have installed Adobe digital additions and have tried to authorize but keep getting error message "Connection error" . The internet connection is working and I do have an Adobe ID can you help please.
    I have been using Adobe reader for PC to download my eBooks but the eBook Vendor has switch to Digital Addition,

    this is from sjpt,
    Try completely removing any authorization using ctrl-shift-D to ADE (cmd-shift-D if on Mac).
    Restart ADE, and then reauthorize with your Adobe ID.

  • I have a MacBook Pro and all of a sudden  I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

    I  have a MacBook Pro and all of a sudden  I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

    BXB1905 wrote:
    I tried the Apple diagnostics it did not work.
    What do you mean it did not work!  What were the results of the diagnostic tests?
    Have you contacted your ISP to determine if the problem is on their end?  
    Have you changed your router channel?  Sometimes this resolves wireless problems.
    Your profile confirms you are using Lion.  Check out the following: 
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    Configuring 802.1X in Mac OS X Lion and Later

  • Just installed Premiere Elements, tring to register I'm getting this message:Either your computer is offline or the clock on your computer is set incorrectly, causing a connection error. An Internet connection is required. Please connect to the Internet o

    Just installed Premiere Elements, tring to register I'm getting this message:Either your computer is offline or the clock on your computer is set incorrectly, causing a connection error. An Internet connection is required. Please connect to the Internet or adjust your clock and try again.". Have tried all suggested steps, no problem registering PSE  one month ago. Win 7 system. Is there a solution?

    Laurenceb70597335 you can find details regarding the activation process at Activation & Deactivation Help.  This includes details on how to activate and deactivate Premiere Elements.

  • Why do i get a "no service" message when I am around a wireless internet connection

    I am again suffering from "no service" on my iphone and again, I'm in a very well connected area so I should not get this message again.

    "Wireless internet connection" - i.e. Wi-Fi - is not the same as cellular network connection.  You see ""No Service" when the cellular network from your carrier is not available in your location (indoors in particular).

Maybe you are looking for

  • End Routine - Modify a record in the cube

    Hello Guys, In the end routine I have to update a field . The transformation is the same cube to the cube. I want the record to be modified like add a value to a field in the end routine. Since it is a cube it creates a new record instead of overwrit

  • Edit a PDF document

    How do I edit a pdf document?

  • Conversion .pdf file to .jpg files

    How could I convert a .pdf file into .jpg or .jpeg files. With some .pdf files I can do this by "Save as type" - .jpg. But many .pdf files don't have this option. Do anyone know why or where can enable this option?

  • IPhone 4S displays the number 162 in the sent folder?

    My iPhone 4S displays the number 162 in the sent folder, I do not currently have any sent emails in that account. I've done a soft reset and results are the same.

  • How can i make a picture in html?

    How can i insert an image in html script. I want when people visit me website they can see a picture. But how can a insert a pictrue from my laptop to my html script?