'Laserjet 1022n Windows Update' causing printing problems: print jobs don't stop printing

Hello,
a few days ago, I installed the Laserjet 1022n Windows Update on my Windows 7 64 bits and since then, I can't print a page normally: the page doesn't stop printing. I am using a network port with TCP/IP.
I made several trials to solve this problem:
- uninstall the printer driver and installing it again (I tried the last version on the HP site and an older one that worked perfectly before)
- update the firmware of the printer to the last version on the HP site.
When I pause the printer and start the print job, you see it arriving in the list. Resuming the printer, the print starts on the printer but you see that the job stays in the list, flashing again and again. The printer keeps printing the same page.
I don't know what I can do to solve this problem. There is no mean of uninstalling the HP Laserjet 1022n software update because it doesn't appear in the list of installed programs (well on the list of the done updates by the way op windows updates).
I have the same problem printing on the same printer from another Windows 7 PC (with the same windows update done)
But I have no problem printing with my laptop on another network printers.
Is there someone having the same problem and how to solve it ?
Thanks for answering
This question was solved.
View Solution.

I found the solution on this site : http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing
You just have to uncheck the chekbox "Enable two-way communication" on the "Ports" tab of the printer properties and it works normally again !!!!

Similar Messages

Windows Update Causes G500/Win8.1 to basically lock up

I have a G500 with a Win 8.1 OS and windows update causes for lack of better words a lock up.
What happens is I'll restart the system and Windows Update will kick in with a couple product updates and that will take about ten min or so and then a message pops up Windows update failed reverting system settings do not turn off your PC and a little spinning wheel off to the side that just spins and spins. First time it happened I let it spin for about six hours and then did a system reinstall and everything was fine for about a day or so and Windows Update started up again with the exact same result and I ended up reinstalling the OS again.
I have Windows Update turned completely off right now.
Any idea what is going on and how to correct the problem?

hi scjax2014,
Your issue might be similar to this thread.
The "Failure configuring updates" error message can be caused by a security software that's blocking the update (eg. Norton 360, Mcafee Internet Security, etc.) or a BIOS setting like Secure Boot.
To isolate, can you try the following:
1. Apply one of the resolution in this microsoft article.
2. If same problem, try to Install the Windows Updates manually by navigating to Control Panel (large icon view) > Windows Update.and select "Check for updates" (Windows will now gather updates applicable for your machine). When finished, click on the important updates install the updates in this order (oldest ones first):
- Critical Updates (if any)
- Security Updates
- Updates for Windows 8
If you still get an error, try to install the updates one by one or three at a time and observe.
Microsoft thread:
Error Code 800f0922 for KB2871690
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

My ipad won't start up. I downloaded iTunes on my pc while my iPad was charging - could this have caused the problem? I don't want to restore to factory settings and lose data. Any ideas or solutions? Thanks, Linda

My ipad won't start up. I downloaded iTunes on my pc while my iPad was charging - could this have caused the problem? I don't want to restore to factory settings and lose data. I also recently successfully paired my ipad with a bluetooth keypad. Any ideas or solutions? Thanks, L

FYI, your iPad will charge much faster if you plug it directly into an electrical outlet.
When doing the reset, as Jackkcc suggests, make sure you let go of both buttons fairly promptly after the apple image appears, then wait another 10 seconds or so for the iPad to start up. Note that a reset does not alter any data or settings.

Window update causing printer driver problems

Hi, I have a laptop running XP and wireless router (WAG54G) and a HP6380 All in one. About 2 nights ago a Windows update installed by itself and rebooted the laptop (even though I have Automatic Updates turned off as they seem to screw with anything these updates occur anyway grr)..
I went to try and print and found that the 6380 was missing from the list of available printers.. The problem is not with the wireless network (as that is connected and working). I am not sure what this windows update did.. but when I tried to reinstall the drivers for this printer from the disc, it recognised that they were already installed.. So I uninstalled them instead (and it picked up that only parts of the driver remained and it removed those parts).
So then I tried to do a fresh driver install.. which took a long time as it got stuck at the end...Eventually it came up with an error and so I tried to submit to HP - and was given a desktop icon to click on.. (HP Installation Icon - XP). I have tried it but it tells me to 1)reinstall driver (done that twice - well attempted anyway... or 2) troubleshoot Wireless printing (a non-issue at this stage given that I have no printer driver and I can use the wireless network for other things just fine)
Does anyone have any suggestions please> In the past when Windows updates have caused issues I have used System Restore to roll back but that is only a temporary solution - as Windows insists on updates that I dont want!
Many thanks!
This question was solved.
View Solution.

If you have the original HP software CD, look in the ccc/utils folder for an L3_unintsall (or similar). Run it for a very thorough uninstall.
Reboot.
Now, get the latest software for your printer from the "Support & Driver" link at the top of this page. DO NOT reinstall from the CD (a good rule in general is to not use software CDs, but go to the manufacturer's web site for the latest and greatest).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Laserjet 1022n & Windows 7 64-bit & spooling

My home network has three desktop computers, one laptop and one tablet. Two of the desktops, plus the tablet are all running Windows 8.1. The laptop is running Windows 7 64-bit Professional, while the third desktop is running Windows 7 64-bit Home. All of the computers use the network to connect to the Laserjet 1022n printer that is also connected to the network (hard-lined). The Laserjet does have the latest Firmware installed onto the printer. All three of the devices that are using Windows 8.1 are able to connect and print fine from the printer, however it is the two Windows 7 computers that are having issues with the printer.
The problem is that the spooling is not resetting once a print job has been sent. The print job will continuously print the print job indefinetly unless I go into the "c:\Windows\System32\spool\Printers\" folder and manually clear out the spool. I have downloaded both the Full HP software as well as the basic driver for the Laserjet onto both Windows 7 computers. I have tried running the repair feature and as well as just using the basic driver to add the printer. Nothing seems to be working correctly.
The ONLY way for me to get the printer to work is to use one of the Windows 8.1 computers as a middle-man; connecting to that computer and sending the print job through that computer. Only issue is that it takes forever to spool the print job to the Windows 8.1 computer before it can start printing. These are fairly new computers; both purchased in the last year. Both have 4 Gigs of RAM so that is not the reason. So I am not sure what is going on.
None of the computers are directly cabled to the printer and the main Windows 7 computer that I really need to have working with the laserjet is on the opposite side of the house (the Windows 7 laptop does not use the print feature that much, so it is not AS critical).
Any help would be much appreciated.

Welcome to the HP Forums Hinalover,
I see by your post that you are having issues with the print spooler on the Windows 7 computers.
I can help you with this issue.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
Try running the Microsoft Fix It Tool to see if it will fix the print spooler.
Diagnose and repair Windows File and Folder Problems automatically.
You can also run the System File Checker to repair corrupted or missing files.
System File Checker: Run sfc /scannow & analyze its logs in Windows 7 | 8.
You might end up having to do a repair of Windows.
Please let me know the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HT204135 Photoshop CS5 Printing Problem on iMac with Epson 3880 printer

All of a sudden I can't print from Photoshop CS5 on my iMac with OSX Mountain Lion installed. I am able to print from Illustrator, however. Have tried to update the Epson 3880 driver. After clicking on "Print", it doesn't register with the computer, and from then on, the "Print" option is greyed out.

Are you using moab icc profiles or are you using one of the epson profiles?
I always use the moab profiles which you can download from their Web site. This way you are matching the specific epson printer with the specific moab paper.
At that point you change the printer manages color to Lightroom manages color and select the specific profile. Very easy to do - they even have instructions on the Moab site for installing the profiles if you haven't done that.
Once installed you can also use them through the system print dialogs in PS but it is really much much easier to use in LR - Since coming on board with LR last summer, I have switched to doing ALL printing from LR. Since you mentioned that you are having the same problem with LR and PS, I'm betting you are using epson profiles and this will solve your problem.
Hope so
Tom

J2SE update caused Skype problems..... ?????

Good morning everybody.
I hope my post will not be removed - I tried to get help from Skype support with no help, and since an Apple update caused my Intel iMac some problems, i hope this is the right place for my question
A few days ago i received a message regarding automatic update from Apple regarding:
Front R update
QuickTime update
J2SE50 Release 4
When trying to install, i got the message that its not possible on my machine? So i was adviced from Apple support to manually install these updates, which i did, with success...
Until i tried my Skype , and thats what i get in the chat-instant messaging window whenever i try to write a message to another Skype user:
<div class="incoming context"> <div class="message-head"> <span class="sender"><a href="skypechatcontact://%senderScreenName%">%sender% <span class="date"><b> %time% <div class="clear"> <p>%message%<div id="insert">
all i wrote is "testing" ...
I believe its a problem with JAVA, so i was on the phone with Apple supprt for 2 hours, and after all the checks, they said that can not help me, as it is a problem of Skype ....
Please note that the users i write to, CAN c what i write, but i can not c it, or c what they write me.
Please also note that i erased all the Skype preferences, and all file sfrom library and applications support, tried to reinstall, erased all again, then tried to install the new 1.5 gold, and then Beta 2, but all the time the same problem...
Would be very happy if someone here has any idea how to solve this issue... I looked and asked alot in Skype forums, seems that more people got my problem, but nobody was able to find a solution...
Thank you very much for all the people here that try to help.
Have a great day everybody,
Elad
Intel iMac Mac OS X (10.4.7)

Hi, thanks alot for your reply.
Well, after Apple support , checking with me some issues on my Intel imac decided its all ok with my OS, i thought would be good idea to erasae any Skype trace from my OS, after that i installed again several different versions of Skype, the 1.5 and the 2 beta, whcih worked great before it all started...
And i just keep getting this "gibrish" codes instead of the text i type..
Regarding the permissions, must admit i have no idea about this issue, c, i was using XP until buying the mac, so im learning all the time...
I will be looking now for the info regarding permissions, and then try it.

Looking for previous post!! Windows update causing flash to not work?

A few days ago i finally fixed my problem where some automatic updates from windows caused flash to not work on some videos. I uninstalled these updates, but can't find the question/answer that helped me with my solution. It had to do with uninstalling 2 windows updates, KBsomething... can anyone direct me to that post??

Was it this post?
http://forums.adobe.com/message/4865912#4865912

Window Update causing system lockup

I have a thousand questions on This computer. But the immediate question. I hope it will not take to long to get an answer on this one.. Two questions, actually. Cause to start figuring this I really need to know these two things:
1. How do I find out what version Bios I have on this computer, so I can know whether it actually needs the BIOS flashed.
2. I have had to "restore" my son's laptop type b570, twice now after installing the mandatory updates being offered by Microsoft Updates. For Window 7, 64 Bit, home version. Is there a freak issue that I need to know about here?!!

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Based from what i read in your post, seems some MS updated is causing system failure
There are various reasons which can cause such issue. Please refer below link for various issue and resolution
http://support.microsoft.com/ph/6527
http://pcsupport.about.com/od/system-security/a/prevent-windows-update-problems.htm
For checking the Bios version of the system you can open system information under Accessories >system tools under system summary you can find the Bios version and date details
You may refer this Link for Bios & Driver Updates
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Printing problem with 8.0. videos printing on paper

I have used acrobat 6.0 for years, and have made many forms for my customers. When I made these forms with 6.0 I put videos on the forms to explain how to use the forms then when they print them the videos are not printed. However now that I have purchased acrobat 8.0 these forms are printing the videos on the paper. I do not know why this was not available on 8.0 as it was on 6.0. Why was this not continued from 6.0 to 8.0. Is there a hot fix or something that can solve this problem for me? Has anyone else came across this problem? any help would be appreciated. Thank You.

Thanks for your response. I may not have emphasized in my initial outline that all my other programs print fine on the Epson 7890; only printing from Photoshop is problematic. Do you still think it is an Epson problem?

Windows Updates causing PSD files to corrupt?

I was curious as to if anyone else has ever had an issue with Windows Updates performing (possibly the updates that came out this week for various Microsoft products) in XP causing PSD file corruption in certain files?
The situation I'm looking at is that one of our users' computer had an update, which installed yesterday. Suddenly, 2-3 PSD files (which I am able to open on my own computer) are giving an error when trying to load of "Could not complete your request because it is not a valid Photoshop document." Tried recreating the prefs folder to no avail.
The only solution that worked was performing a system restore to a previous date. However then today the computer reinstalled the update again and the files appeared to corrupt again and not open. Other PSD files are still opening fine (as well as importing via Place in Illustrator), its just these particular few that are not (they will not place in Illustrator, giving a similar error message saying it is not a valid file type).
Any ideas, or anyone else having similar symptoms?

Hi,
Uncheck all updates with drivers and check will this help or not.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Printing problem when adding a button to print the whole page

Hello,
I added a button with printing option = Apply to self, Print = page.
The result is that it prints only the i-view in which the button is located. I want the whole page to be printed. The page is composed of several i-views and I also use layers.
Has someone an idea ?
Thanks a lot,
Thomas

Hi Thomas,
I received exact the same problem case during our visual composer developments. On SPS 14 the print functionality worked as expected with the print option u201Cprint pageu201D. After the implementation of SPS 16 we had to use u201Cprint screenu201D.
Hopes this helps.
Best regards
RB

Xorg & Catalyst updates cause major problems here

I went through the other similar threads and tried just about everything without luck... The latest Xorg & Catalist updates cause lots of problems on my desktop.
The video card is an ATI X300.
Without a xorg.conf, X server starts and things work, more or less - but much slower than they used to. It's pretty clear fglrx is not actually used, xv doesn't work, fglrxinfo gives:
Error: unable to open display (null)
With the previous xorg.conf (the one wich worked fine before the updates), X doesn't start (even after commenting out the "RgbPath" line and adding Option "AutoAddDevices" "false") and the log shows many fglrx errors such as:
(EE) fglrx(0): Unknown EDID version 0
(EE) fglrx(0): ===[swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
X -configure won't generate a xorg.conf
Fatal server error:
Caught signal 11. Server aborting
In conclusion:
- without a xorg.conf fglrx doesn't work although X server starts
- with an old xorg.conf fglrx will generate errors and X server will not start
Any ideas?
Last edited by zamolxis (2008-12-15 14:11:41)

De Mysteriis wrote:
# pacman -S xorg
# pacman -S catalyst
Add HAL daemon to your rc.conf
# cp /usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi /etc/hal/fdi/policy/10-keymap.fdi
# vi /etc/hal/fdi/policy/10-keymap.fdi
(Add your keyboard layout)
# vi /etc/X11/xorg.conf
(Write something like # My xorg.conf and save)
# aticonfig --initial --input=/etc/X11/xorg.conf
# startx
This worked for me 100%.
I had alreday done all that. Still, X will crash every time after changing the resolution (for tv out) and back and won't restart unless I delete /etc/ati/amdpcsdb first. Rebooting won't help either (again, unless I delete /etc/ati/amdpcsdb first).
Last edited by zamolxis (2008-12-16 09:14:48)

Wireless printing problems with Canon iP4300, but USB printing ok

My MacBook Pro is setup for wireless printing with a printer(Canon Pixma iP4300) connected to my other PC Desktop. The only problem is that when I print anything all the text and images are miniaturized and squished about a quarter of a page large into the upper left corner of an 8.5x11 paper. I installed all the programs that came with the printer installation disk and when I connect my MacBook directly to the printer via USB everything prints out just fine.
I suspect the problem is with the selection of printer model when you go to "Printer Setup" in System Preferences. The existing list of Canon printer models given to me by the computer does not contain anything specific for my iP4300. I simply chose the option "BJC 4300 Gimp-Print v.5.0.0-beta 2". Does anyone know of a way where I could add to that list of printer models or is there another way to get my wireless printing to work normally? Thanks to anyone who can help.

I have the same printer and network printing is a pain. Canon decided not to include a network specific driver for this printer.
You can try getting the latest version of the gimp-print drivers. The latest version has better support for ip4300. If it's worth it to you, PrintFab drivers have been working for me but PrintFab isn't free.
The latest Gimp-print (Gutenprint) drivers are here: http://gimp-print.sourceforge.net/MacOSX.php3
Hope that helps.

'Laserjet 1022n Windows Update' causing printing problems: print jobs don't stop printing

Similar Messages

Maybe you are looking for