Laserjet 1200 will not stop running.

I have a LaserJet 1200 as a back up printer. It gets used once or twice a month and therefore is in great condition.
This morning when I turned it on it started running and just won't stop!
Any ideas why?
Moly

The "Incoming Call" message is shown whenever we see a ring signal on the line, regardless of the fax receive mode.
If this message is showing up when no fax is being sent, then it means that there is noise on the phone line. You can contact your phone company to discuss options in reducing the noise on your phone line.
If this message is showing up with no phone line plugged in, then the modem inside the printer is detecting noise. It is possible that the internal fax parameters have become corrupt. If that is the case, then you can perform a "Restore Defaults" in order to reset them. Note: doing this will erase all of your settings. You can print out a configuration report before doing this so you can reset them. A restore can be done at the control panel by pressing [Setup] on the main screen (the button with the wrench on it), then select "Service" and then "Restore Defaults."
This is based on my own experience with the product.
I am an HP Employee.

Similar Messages

Dock icons will not stop running

The icons on my dock will not stop running. They have the small blue light under them when in use but the light does not go off when I close the program. I have been quitting them by holding down the curser on the icon until menu comes up to quit. Help, please. Thanks, Arudi

yup. bizarre. logged out of MobileMe and I try to move the Keychain Icon from the third on the left to the last on the right and -whoooo-oop - it slides back to the left. no fun. like having a gremlin moving books around in my library or something...

Sound Test will not stop running

I have a sound bar hooked into my desktop tower using the front headphone jack. I tried to run a sound test on it and the sound test worked. Now, the sound test will not stop running. Every time I turn on the sound bar, I get the annoying, electronic siren noise. How do I stop this and return the sound bar to its functioning state?

Thanks. Lease see the attached link http://support.apple.com/kb/ht4097#
Click on the 'more' link near the beginning as this may be crucial in your case. Also note the very last paragraph regarding the computer!

Updated to 10.4.8 and fan will not stop running

Ran the 10.4.8 update on my 1.25 G4 powerbook and it worked fine. Ran the update on my my 1.42 GHz G4 mac mini and the fan has not stopped running once. The fan hardy ever came on before. Any one else have this problem?
what can i do to solve this?
mac mini + power book Mac OS X (10.4.8)

Yep, have a Macbook Pro 1.83 Ghz (week 15) with 2GB SDRAM. Since 10.4.8 I have been experiencing the same issue. As somebody else descibed it on this site its alike a spinning wheel sound on a bicycle. Recently Apple have been messing around alot causing problems with networking and CaptureOne and so on. Hope they get their act together soon.
MacBook Pro 1.83 Ghz Mac OS X (10.4.8)

Laserjet cm1415 will not stop showing "Incoming Call"

I have the fax setup in manual mode and it will not stop showing "Incoming call" on the panel even thjough there is no call comming in. Other than that everything works well. Any body have any ideas on how to get it off of that so the printer can go into sleep mode?
Thanks

The "Incoming Call" message is shown whenever we see a ring signal on the line, regardless of the fax receive mode.
If this message is showing up when no fax is being sent, then it means that there is noise on the phone line. You can contact your phone company to discuss options in reducing the noise on your phone line.
If this message is showing up with no phone line plugged in, then the modem inside the printer is detecting noise. It is possible that the internal fax parameters have become corrupt. If that is the case, then you can perform a "Restore Defaults" in order to reset them. Note: doing this will erase all of your settings. You can print out a configuration report before doing this so you can reset them. A restore can be done at the control panel by pressing [Setup] on the main screen (the button with the wrench on it), then select "Service" and then "Restore Defaults."
This is based on my own experience with the product.
I am an HP Employee.

HT1446 my battery on macbook pro will not charge, light doesn't show on connector (but works with my partners mac) and fan will not stop running.

Help please...fan won't stop running and battery just has a cross through it on screen. Connector does not light up,

ry resetting the SMC:
SMC
http://support.apple.com/kb/ht3964
If you look at the battery in System Info, does it show as ok?

20.0.1: File== New Window & New Private Window will not open then Firefox will not stop running when application is closed

Although nothing appears to be happening when clicking on either New Window or New Private Window there seems to be processes started because when I try to close Firefox and reopen, I get an error message saying that Firefox is already running. My only option then is to stop the processes via Task Manager. I have tried (several times) to uninstall and reinstall.

Although advised not to, I finally hit the reset button in the Save Mode Window. This corrected the problem. I suspect a faulty add-on - I try and reject many. I will add them back on at a time as I develop the need. Thanks for you help.

Bursting - Job will not stop running

Was testing out the bursting feature in BI Pub (Release 10.1.3.4) and after changing the Delivery Node I ran it again. This time the job has been running for over 2 hours. Since the job is only listed in my history, I cannot delete the scheduled job.
Is there anyway to stop a job after it has already started running? Force it to fail out?
Thank you.

You can delete/stop/pause a Job that is scheduled to be executed in a future date.
But you can not alter its state once is it is running, such
functionality has not been implemented in BIP10g.
Cheers
Jorge
p.s. If this answers your question please grant the points and close the thread

Imac fan will not stop running after power outage .

unpluuged after we lost power . now the fan runs constantly.

If you note that your Mac fans don't work correctly, do a SMC reset > http://support.apple.com/kb/HT3964

Compressord will not stop running

Just today whenever I open fcp 7 the fans rev up and my CPU activity jumps to 50%-70% due to a process called "compressord." Here's what I've tried:
- Quit process. Nothing
- forcequit process. Nope
- quit fcp 7 and quit/forcequit. Neither.
- open compressor, clear history.
- Forcequit again.
- Logout of user.
- Reboot machine. <---- successBUT:
Upon starting final cut pro 7 again, the process returns. Same system of elimination yeilds same results. Only a reboot.
I went through the activity history of the process and, while I don't know code, I did recognize a compressor batch process that I began about 2 weeks ago. I remember the process completed and nothing was strange then. Also today is not the first time I had opened final cut since this batch process had been submitted.
PS - another culprit just hit my radar while typing this: qmasterqd
What is going on? I really do not want to reinstall the entire studio because of this.

Wow...I solved it! already! I never solve my own posts. Woopi!
Solution: RESET BACKGROUND PROCESS IN COMPRESSOR. I was reading a forum located here: https://discussions.apple.com/message/2555981#2555981
The post that offered the solution I needed was this:
Hey Alex ... I just tried this few minutes ago and so far i havent seen the not responding in the Activity Monitor yet. Try and Reset Backround Processing in Compresser from the menu. I think this should solve your problem, At least it did for me, At the moment
MacBookPro 2.0, Mac OS X (10.4.6), 15.4" Display - 2 Gig Ram
I hope some poor soul who encounters this problem in the future reads this and saves themselves some trouble.

I bought a ibook G4 2005 refur-ed it is making a fan running noise when I listen to sample music on line and it will not stop until I reboot.. What could that be also bottom of computer very hot?

I bought a ibook G4 2005 refur-ed it is making a fan running noise when I listen to sample music on line and it will not stop until I reboot.. What could that be also bottom of computer very hot?

When my iBook got hot like that, I would take a break and let it cool down.
You can buy laptop desks that have USB powered fans on them, such as the Targus Chill Mat.

My ipod touch will not stop playing music

My ipod touch will not stop playing music. I will pause the music, leave the playlist, and after 30-60 seconds, the music starts playing again. I use my ipod when I run and when I drive (hook it up to the stereo). It is very annoying when I stop to take a phone call or listen to directions, turn off my music, and then hardly a minute into my stop, the music starts right back up again.

FUEL1996, not correct. Apple does not allow one app to control another app.
laurathecellist
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Distiller will not stop distilling postscript file

I use Distiller 6.0.2. Lately, when I try to distill a Quark layout into a pdf the distilling process will not stop. The progress bar shows a number that just keeps on climbing up. It seems if I quit the program and then restart it, this will solve the problem and distiller will make a pdf of the postscript. However, I will get the same problem once I try to distill another page. I tried to trashing the Distiller preferences and then restarting the program. This did not do anything.

It's not a specific file and it doesn't matter how big a file is. I am distilling a postscript file. My Mac is running on 10.3.9. I only print from Quark to get postscript files.

ITUNES WILL NOT STOP CRASHING!!!!!! - i'm fed up with it.

ITUNES WILL NOT STOP CRASHING!!!!!! - i'm fed up with it, i cant load it, i cant add music too library, i cant sync my phone, i cant update, it runs for about 30 seconds, and crashes every time. i havent added a folder to the library, only tried to add mp3's which have previously worked fine... what else is there thazt i can manage my iphone data with?

What kind of a computer are you using ?
Have you checked your Firewall?

Log capture will not stop

Can someone help when I log and capture all works OK but when I press escape it will not stop capturing no matter what I do, I have even tried swapping keyboards can someone help
Thankyou
Jenni

OK, first some basics
1. trash FCP prefs
2. Run Disk Utility and Repair permissions and Repair Disk
3. check you system prefs, make sure that your energy saver settings are so that the system stays awake and disks do not power down.
4. FCP prefs will need to be reset, if you are using capture now, check that it not limited, reset you drives and etc.
5. Try capturing using log clip and a short piece.
6. try capture now.
7. oh and check that the codec of the caerma/tape is the same as that you are capturing with.
As I said, some basics to start with

Laserjet 1200 will not stop running.

Similar Messages

Maybe you are looking for