Laserjet 1320 - no duplex, print comes out offset, top 4 lines missing

Hi,
I have an HP Laserjet 1320 connected to an Ubuntu (Gutsy) server and shared as a SMB printer.
Printing from Linux or Windows XP works fine: the print is aligned, I get duplex etc.
When I print from my Macbook Pro running Leopard 10.5.1 I get the following:
- The print alignment is offset vertically, resulting in the top four lines or so missing from each print (i.e. off the paper).
- No matter what I sent in the print dialog duplex does not work.
I have installed the latest driver from the HP site, but that didn't make any difference.
Any ideas?
Regards
D.

I found this fix for duplex from a 1320;
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c00752270&jumpid=regR1002USEN
The thrust is that the print option is set intra-application, not at printer level. Say launch word, select print, then click on copies and pages, this gives you the option for 2 sided. You can over type the "standard-1" with text such as "Duplex 2 sided printing", which then defaults to mail etc.

Similar Messages

CS5.5 InDesign: Last 2 pages of multipage duplex print come out 1-sided

Using CS5.5 InDesign, last 2 pages of a multipage duplex print come out 1-sided. Same page ranges print OK in PDF. Printer is HP Color Laserjet 4700 with latest device firmware. Have latest HP drivers on Mac OS 10.7.
This is a recent problem. Had no problems with CS5 InDesign duplex printing from this computer to this printer until a couple weeks ago. First sign of an issue was that printing slowed to a crawl. Literally 5 minutes to resolve one page to the printer. Updated the printer firmware and speedy printing returned, but then noticed the duplex printing issue. Problems began about the same time as a Mac OS system update, but I'm not sure which came first, the software update or the printing issues. No problems with the printer from other software or other computers on the network.
I have read that certrain InDesign print settings sometimes produce unexpected results in some computer environments. Am hoping this is the case, and someone on this forum will know the trick.

evollowitz wrote:
...and someone on this forum will know the trick.
I think for most users, "the trick" that produces the most consistently predictable result is to never print directly from InDesign; always go to PDF and print that. Personally, I haven't even attempted to print from InDesign since CS2.

Using a mac 10.6.8 to print duplex to HP laserjet P1606dn, order of paper comes out mixed up

using a mac 10.6.8 to print duplex to HP laserjet P1606dn, order of paper comes out mixed up as follows: the first page out is page 2, with 1 on reverse side, next page is page 4, with 3 on reverse side., etc. This requires that I re-collate every paper I print. Have tried a few things in set up and re-installing the printer, but still not fixed.

I am having the same problem. Nice to see that HP has not responded.

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew o

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew out. I have tried printing 'one single page' and it does exactly the same? Help?

Is the Poster Print feature turned ON?

When printing objects with lowered opacity prints come out pink

At the office here we have a SHARP MX-5112N PCL6. We use Adobe Indesign CS6 for designing and printing our marketing material. A problem I have encountered is everytime I use a lowered opacity on a filled coloured object the print comes out a pink/magenta colour no matter what the colour is on the document.
I have attached two images to show what the print should come out like (first image) and what it does come out like (second image) on the SHARP MX-5112N PCL6.
I have tried various printer colour settings but nothing seems to correct this.
If anyone has a solution for this please leave a comment below. This only happens when using tints/opacity adjustments so its definately a software issue.
Many thanks,
Nick

Have you got the latest print driver for your printer?
Have you downloaded a postscript driver for your printer? If you do - you can install the PS driver as a separate printer in your printing options and try print from that instead.

Every photo I print comes out red.

Colour printing works fine till I choose photo paper. The picture is black and white. The print comes out of printer Red. This has never happened to me before. I tried printing from Adobe Photoshop elements and Iphoto Same results from both.

Check your printer. The nozzels may need to be cleaned. Run the printer's utility to clean and check the nozzels and check the ink supply. Some printers use multiple colors in prints B/W images.
OT

Prints come out as blank

prints come out as blank using Adobe X 10.1.2 win 7 on network printer ( HP 2035N )

I started to have the same issue last night on my Samsung printer. Here are some things I did. One, I noticed it defaulted to printing to One Note and not my printer. I also had to change the Quality advanced setting from 600 to dpi1200 . I was also printing blank pages from gmail so anyway hope this helps. I'm printing today. Also my drivers for my printer were recently updated via software update so I don't know if that had any impact or not. I went to my Samsung Easy Printer Manager app and made sure the settings looked okay and I had the right default printer selected. The good news is that it technically is "printing" now it's just finding out the setting or why it's not getting the text info. You may want to also mark print in gray scale to see if that has some impact. Good luck

Just bought a 8500a, when printing a photo on HP Premium Plus paper, the prints come out not glossy

Just bought a 8500a, when printing a photo on HP Premium Plus paper, the prints come out flat,not glossy.
On my old HPL7680 a photo w/same paper come out glossy & shiny. This maybe what should be expected w/8500A and is not a problem w/the printer. The 8500A is set to advanced photo paper, best quality. I worked w/HP tech support and was told to send back to the Amazon where I bought it for replacement. But if this is not really a defective printer than it doesn't make sense to send it back. I also purchased a HP C510 Photosmart and the quality on photos is excellent, so I have solved my photo printing problems per say. Has anyone else noticed lack luster, non shiny photos coming from the 8500A?
My thought process was that if the L7680 printed a shiny, glossy photo, then the 8500A should too. But this may not be what I should expect...
IS MY 8500A DEFECTIVE OR JUST WHAT SHOULD BE EXPECTED FROM AN OFFICEJET PRINTER AS OPPOSED TO A PHOTOSMART PRINTER.
thx Jim

The Officejet 8500 uses pigmented inks which have different characteristics than dye based inks. HP Premium Plus paper is not really very suitable with pigmented inks, a better choice would be HP Advanced Photo paper.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP LaserJet 1320 through wireless print server

I'm trying to hook up an HP LaserJet 1320 through an old DP-311wireless print server. I can access the servier through IE when go to the servers IP address through Parallels, but if I go to the same address through Safari on the Mac side, I get a blank page (although I do get a popup asking for UID and passwd). I have been able to print to this printer - on this AirBook - using the same D-Link rint server - but I removed and reinstalled the printer to try to get the duplexer to work. Now I can't get the printer to work at all . . . bummer.
Any thoughts?

Update - I have gotten the printer to work under Parallels once I assigned it to an LPR queue. Still no progress on the Mac side

HP Laserjet 1320 will not print ?selected pages

I have the HP Laserjet 1320 and when in a Word document and I want to print a selected page (i.e. page 2 of 4 only), under Pages on the Print Menu, I enter 2 or 2-2 and select print and it will not print! I can scroll down to place the pointer on page and tell it to print "current page" and it will print - why will it not print when I enter the page number I want to print.
Thanks
gumboman

My printer would not print multiple copies. It would only print one page at a time.

HP LaserJet 1320 won't print in color (Win7 64 bit, new cartridge)

I can't get my HP Laserjet 1320 to print in color any more. Changed the cartridge. I'm on Windows 7, 64 bit, but the issue started before the upgrade to Win 7. I can't even find the selection for color vs black and white printing.

The LaserJet 1320 printer is a monochrome printer, not a colour printer.

Prints come out wrong size

I have 32 bit Vista Ultimate, an HP 7410 printer, and Adobe Photoshop Elements 6.0 with all the updates. When I print a single print, it comes out the size it is supposed to be. However if I use the "Print Multiple Photos" Option using the same pictures, the pictures do not come out the size I select from the menu.
Is anyone else having this problem? Any fixes?

What size you are getting when you are trying to print multiple copies.
Are you using Organizer or Editor for printing...
Did you try resetting preferences?
+ Ripple (VJ)

Everything I try to print comes out blank.

No matter what I try to print from firefox it comes out as a blank page.. unlike other similar posts on this site my print preview is NOT blank. It looks normal, but then only blank pages shoot out of the printer.
I am using two different printers.
I CAN print to both printers from the SAME websites using chrome or IE10 but it CANNOT print to EITHER of them from firefox.
I HAVE ALREADY tried every trouble shooting step located here: https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox
I HAVE ALREADY tried the 'reset' firefox and I've uninstalled and reinstalled firefox. None have solved the problem in any way.

Known issue with Win10. There are multiple Bugs filed which the Mozilla developers are working on.

Color Laserjet CP3525 and duplex printing

Hi,
just trying out the 3525 and I have noticed that duplex printing is very misaligned, i.e. the printing on a two page spread has a different top margin on the left and right page. This is real dissapointment, I was really expecting more from an HP device and payed much more just to get the duplex function!
Is there anything I can do about this?
Regards
Goran

Hi,
Have you been able to solve the ghost printing problem as I have encountered the same problem & would like to know how to fix it?
Many thanks

Laserjet 1320 - no duplex, print comes out offset, top 4 lines missing

Similar Messages

Maybe you are looking for