Laserjet 1320 won't print from ePrint

I just downloaded ePrint to my iPad 3 and it instantly recognized my older HP 1320. It appears to process the document, but nothing actually prints.
Any suggestions?

Hi elwo,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

HP LaserJet 1320 won't print in color (Win7 64 bit, new cartridge)

I can't get my HP Laserjet 1320 to print in color any more. Changed the cartridge. I'm on Windows 7, 64 bit, but the issue started before the upgrade to Win 7. I can't even find the selection for color vs black and white printing.

The LaserJet 1320 printer is a monochrome printer, not a colour printer.

Color Laserjet 3600n won't print from network

Our small office has an HP Color Laserjet 3600n that has worked great connected to the network via ethernet cable for many years. When we came in this morning it refused to work after a power outage last weekend, and print jobs would just remained trapped in the print queue with either "printer unavailable" or "printer is busy" messages. No error messages appearred on the printer, and it prints fine from an attached USB cable. I verified the network cables, and am even able to access the printer's web interface a-ok via it's web address. It normally operated on all the default settings, I believe, and I can't figure out what else could be the problem other than a hardware fault. Any clues? We have a bunch of toner cartridges and would hate to have to buy a new unit now.

Hi,
Please follow in the link below :
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

HP LaserJet 1300 won't print from Classic

I can’t print out of Classic environment because the printer (HP Laserjet 1300) isn’t installed there. My computer does not have dual boot. (That is, it can run classic, but not boot up in classic.) I've read some related posts and have tried some suggestions, but so far to no avail.
The installation CD has installation for OS 9 and OS 10 and I have installed both from the OS X environment. But there is still no HP Laserjet 1300 icon in the Chooser in the OS 9 environment. I should mention that when I went to chooser and clicked on Laserwriter 8 icon, I noticed that there was a place that said “Select a PostScript Printer” but there was no printers to be selected in the related field. I have been to Apple System Profiler in OS 9 and there is no driver listed there for my HP laserjet even though I have installed it.
When I click print I get a yellow ! message that says that my Document could not be printed because printer “LaserWriter could not be found. Try again?
This printer works fine from OS X, but not from classic. I called apple help and they said to go to the HP website. The HP website said the following:
“Installing a driver in Mac in classic mode
2004/11
Installing an HP driver in MAC® classic mode may be useful: if, for example, an application you want to use is not supported by MAC OS X.
This functionality is supported by the PostScript and the raster drivers.
Installing the driver
With the latest version of the drivers, the installer already foresees separate MAC OS 9 and OS X installation. On MAC OS X, run the OS 9 installation and it will install in classic mode.”
MY QUESTION:
How do I “run the OS 9 installation”? What buttons do I press to do this?
Thanx in advance
Fred

froellig, two wholly different things here.
Looking at the 9 driver for LaserJet 1300 HP offers for download, anyway, it isn't actually a driver - it's merely an installer which, from either X or 9, should give you Printer Description Files to use with the standard PostScript drivers, namely LaesrWriter 8 or AdobePS.
Test that it did that much by using Apple's Desktop Printer Utility to create a virtual desktop printer… If the Change button in PostScript Printer Definition (PPD) File pane leads to a Printer Descriptions list that does include HP LaserJet 1300 Series that much, at least, seems to have worked.
If the printer works from OS X, then you could use LaserWriter 8 in Classic to Print to File, which would give you .ps files which you could manually drag into any X print queue. This works for most printers.
The other thing is that yes, LaserWriter should show the 1300 in the right-hand Chooser pane so again, can X see it and print to it?
If not that suggests a cable or hardware fault, bad settings or interference from other software.
If X can see and use the printer, and there are no other faults with Classic 9, that suggests something inside OS 9 is interfering.

My HP LaserJet CM1415fnw won't scan from my Windows 8 computer

My hp LaserJet CM1415fnw won't scan from my computer using the paint application on my computer. I had no problem with previous computer. But I purchased a new computer with Windows 8 and the can option in Paint cannot be selected.

Hi HelenBay,
Welcome to the HP Forums!
I see that your HP LaserJet CM1415fnw will not scan from your Windows 8 computer, and I am happy to help you with this scanning issue!
For further assistance, I will need to know:
If the printer is connected, Wireless, Ethernet, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try the HP Print and Scan Doctor, and let me know what happens!
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Laserjet P2055dn won't print pdf files

I have just hooked up a new iMac with Mac OS 10.9.5 and now my reliable HP Laserjet P2055dn won't print .pdf files anymore--it just hangs for hours. I am an academic and work 50% with pdf's. I tried to download a new driver from the HP site for all MAC OS systems 10.7 and up, but the message when the download was finished opened up in a little box that reads: "ljp2055_Firmware_Upd Image not recognised."
I've unplugged, plugged back in, turned off, turned back on countless times. Don't know what else to try?
Thank you.

Hi john, I did some looking around and maybe try this page for some tips, sometimes the microsoft forums help me out dearly.
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/unable-to-print-pdf-files-with-wi...

HP Laserjet P1006 won't print "Printer Offline"

My hp laserjet p1006 won't print and the error message says "printer offline". The printer does show up in System Profiler. The printer is on, and connected via USB. Ready light on printer is on. Sometimes the orange light blinks but is mostly off. I tried different USB ports (eliminating the hub) and switched out the USB cable. Restarted computer and printer, updated driver and repaired disk permissions. I recently switched to Snow Leopard but the printer has printed since I switched numerous times.
I had this problem 2 weeks ago and finally it fixed itself, but since a restart it doesn't work. Any suggestions?

Ken Spiker wrote:
Yes, I just downloaded the Apple HP update 2.3. The driver that was showing in my Printer Setup Utility was 1.2.0.224. Now I downloaded and installed 2.3 but the Printer Setup Utility only shows 1.2.0.224. 2.3 is not listed in the driver list. Why is that?
2.3 is the version of the update, not the version of the driver.
According to http://support.apple.com/kb/HT3669, 1.2.0.224 is the correct version of the HP driver.
Final question: why do I have problems nobody else does?
People are having a variety of problems. It may be because of permissions, previous versions of the HP software that was installed and not deleted. Since there wasn't support for this printer on Snow Leopard until the 2.2 update, it's hard to guess what the issue was, but you're not alone - read some of threads here.
If you run into this problem again, delete the <hard drive>/Library/Printers/hp folder, delete your printer from Print & Fax, then run Software Update and re-add the printer.
Hope this helps.

Just purchased HP 8610 printer, but it won't print from my 8.1 windows computer

just purchased HP 8610 printer, installed it wirelessly to my network but it won't print from my 8.1 windows computer. I can print from my cell phone and I can print using the eprint function, but even though I can see it on the network I can't get it to print a document.

Hi,
Have you ilstalled it software and drivers on your computer yet ? Please download and run the following tool:
http://ftp.hp.com/pub/softlib/software12/COL50849/mp-136589-1/HPPSdr.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My HP Photosmart 6520 won't print from my chromebook. It use to, but now it won't.

My HP Photosmart 6520 won't print from my chromebook. It use to, but now it won't. Please help!

Hello,
Is your printer connected to a wireless network with Internet access?
Do other web services work on the printer? Meaning, can you use ePrint or the Printables on the front panel? (printables = apps on the printer like Disney, Menu Planner, Quick Forms, and so on.)
Miles
HP Employee

LaserJet 1020 won't print first document after powering up

My LaserJet 1020 won't print the first document it receives after powering-up. Print manager shows that the document is being sent, the printer makes noise like it's getting ready to print, but the document is never printed and I don't receive an error messages. If I send the document again the document prints as does every document there after.
I'm using Windows Vista Professional and the printer is connected via USB 2.0.

Hi jnickelsen,
I understand the printer won't print multiple copies.
Thank you for your reply.
I will be happy to help you with this.
This printer doesn't have the Mopier settings.
What drivers are you using?
Did you download the drivers or are you using the Windows preinstalled drivers?
If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color Laserjet 2605dn won't print the red color

My HP Color Laserjet 2605dn won't print the red color. It's comes out very light, barely a pink color. It's not the ink cartridge because it's full and I'm having this problem even when I change cartridges.

Hello dp146,
I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums.
This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

Suddenly, my HP Laserjet 6mp won't print. The icon says it's in use (but it isn't), at other times it says it's not connected (but it is). Help!

Suddenly, my HP Laserjet 6mp won't print. The icon says it's in use (but it isn't), at other times it says it's not connected (but it is). Help!

That page's troubleshooting for the "Filter failed" message worked out. I consulted the Wiki before but never found that exact page. I guess I didn't use the best search criteria. Thanks for pointing it out.

HP Officejet Pro 8600 N911g won't print from applications from IMac OS 10.7.5

Just had a software update today, now it won't print from applications (Excel, Word, etc). I've done all the troubleshooting in the exact orders and have also shut everything down, reinstalled, turned off router, etc. Don't know what else to do. Prints out printer status report, Wireless network test results shows that no problems found, congratulation on the successful setup of your wireless printer. IP addresses on wireless and printer are similar. Looked all over forum, but couldn't find a solution. Printer is not even 2 months old. Doesn't make sense. Seemed to stop printing after we used the scanner, not sure if that is an issue for any reason. Any help would be appreciated, thanks.

Just had a software update today, now it won't print from applications (Excel, Word, etc). I've done all the troubleshooting in the exact orders and have also shut everything down, reinstalled, turned off router, etc. Don't know what else to do. Prints out printer status report, Wireless network test results shows that no problems found, congratulation on the successful setup of your wireless printer. IP addresses on wireless and printer are similar. Looked all over forum, but couldn't find a solution. Printer is not even 2 months old. Doesn't make sense. Seemed to stop printing after we used the scanner, not sure if that is an issue for any reason. Any help would be appreciated, thanks.

My epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

my epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
Credit for this solution to ASC user Yuengdog1983.

Won't print from rear tray

I have a Pixma MG6220. No matter what I do it won't print from the rear tray from a source on the web. I go to both the quick setting and main tab and select "rear tray." Still prints from cassette. I took out the paper from the cassette. Won't print unti I load paper in the cassette. I even selected a different paper than plain paper and selected rear tray - but it still printed from the cassette.
I selected "continuous autofeed" for a default, removed paper from the cassette - and it still wouldn't print from paper loaded in the rear tray.
It will print from the rear tray if it's a document originating from my computer (or at least I just tried that and it worked). I did not change from plain paper, I only had to select rear tray.
Yes, I realize "save the document to your computer" will be a suggestion, but the website won't let me. It's a "free printable" that is not downloadable.

Hello.
The issue may also be related to a setting in your web browser. Check to see if your browser has a Page Setup option. This menu may be controlling the paper feed setting.
If the issue persists, please try using a different web browser to test the unit.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Laserjet 1320 won't print from ePrint

Similar Messages

Maybe you are looking for