Laserjet 1536 double side printing problem

bought the all-in-one laserjet 1536 recently. I am using Windows XP on my computer and connecting the printer through wireless.
i find that when i attempt to print double-sided from powerpoint or pdf, the 2nd page will become multiple black lines while the first page is fine. However if I print from Word there is no such problem.
Can someone please advise me what to do? Thanks!

Using a networked connection, I tested the below fdrivers in XP SP3 and did not have any of the issues that you reported. If you are still experiencing this issues, I would suggest that you try re-loading the full solution drivers located on hp.com.
m1536 full solution drivers
You may also load just the firmware update: 20110405 Firmware Update
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

PhotoSmart Premium C309a driver problem in Win10 at double side printing

My problem is as follows: I created a catalog in MS Publisher 2013 for A4 paper format with 2 page per paper. I selected booklet side-fold type and double side printing. MS Publisher prepared all pages in correct way. I even created PDF versuions of such pages. But each time when I print pages, the printer keeps make them smaller (I think it scale them for Letter format) despuite the fact I changes in printer preferences A4as default paper source, all documents are in A4 format etc. As result, the printed pages are shifter from the center page on the left side, which is ok for one side printing but cannot work for doyuble side printing as shift is in different directions for result paper. Additionally, I cannot any more print on DVD or CD surfaces as the driver doesn't support sauch a feature. Please let me know how I can replace the native Windows 10 driver with the one for Windows 8.1? Or is there any other solutions except using another OS? Thx, Vlad.

Hi , Welcome to the HP Forums! I noticed that your HP PhotoSmart Premium C309a is having a driver problem in Windows 10 when printing double sided. I am happy to help! According to this guide, How to Use the 2-Sided Feature, it looks to me as if the double sided printing feature is only available to use with regular plain white paper. (Letter sized), which could be why the printer is scaling the size to letter. You could possibly try using an alternate driver, by going to this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by , and follow the steps for Windows 8, as they will work on Windows 10. Then you could attempt a custom size print. But as mentioned previously, I am positive that the 2-sided feature for this printer is for Letter sized paper only, and cannot guarantee this will work. Hope this answers your question, and thank you for posting! “Please click the Thumbs up icon below to thank me for responding.”

Black ink only & double side printing

This is regarding a printing issue using my newly bought printer. I wish to print double sided using the option black ink cartrige only under grayscale printing. However, when I select double side printing, there were only 2 options under the grey scale printing (off which means color or high quality). Is there a way to select both double side and black ink cartrige? Furthermore, does grayscale printing using high quality option uses ink from the black ink cartrige or also from the color cartriges? thanks in advance

What printer model? What operating system?
Generally there are two options for grayscale printing, either "use black cartridge only" or not. If the "use black cartridge only" box is not checked color ink will be used as it provides better print quality.
Some printers and some drivers do not support "black cartridge only" when printing in duplex mode. In duplex printing a small amount of color ink may be used to underprint the black print to make it dry faster to prevent smearing in duplex printing. (Not intuitive, but it is correct....)
See here for some information on how ink is used. Some ink will be used for servicing even when printing with black ink only.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Double side printing from SAPScript, last page missing

Hello all,
I try to setup double side printing from SAPScript, but have a problem and hope that somebody might help me.
In my form I have two pages with main window (FIRST and NEXT) which have print mode set to 'D' and next page set to 'TANDC'. Page 'TANDC' has only one VAR window which contains terms and conditions text.
Now, everything works fine except that T&C text isn't printed after last page (ie. after last 'NEXT' page). Is there a way to force printing of last (back side) page?
PS: Calling 'WRITE_FORM' from the print program at the end didn't help either.
Thanks in advance.
Grigor

Hi Vinod,
this has a same effect as calling NEW-PAGE from form.
Again, window 'FOOTER' is printed on a new page instead bellow 'MAIN' window and there are no T&C on the last sheet. I also tried to explicitly call text element in window 'FOOTER' before calling 'CONTROL_FORM', like this:
CALL FUNCTION 'WRITE_FORM' "last element in 'MAIN' window
       EXPORTING
            element = 'LAST'
       EXCEPTIONS
            OTHERS = 01.
CLEAR sy-subrc.
CALL FUNCTION 'WRITE_FORM'
       EXPORTING
            element = 'FOOTER'
            window = 'FOOTER'
       EXCEPTIONS
            OTHERS = 01.
CLEAR sy-subrc.
CALL FUNCTION 'CONTROL_FORM'
       EXPORTING
             COMMAND = 'NEW-PAGE'
       EXCEPTIONS
             UNOPENED = 01
             UNSTARTED = 02.
It looks like the 'FOOTER' window is under control of SAPScript, not of print program.
Note: 'CONTROL_FORM' call is placed immediatelly before 'CLOSE_FORM', so at the last possible place.
Kind regards,
Grigor

How to stop double side printing on HP ENVY 4500!!!!! HELP ME PLEASE!!!!!

i am going CRAZY!!!! I can't stop with the damm double side printing !!! And it's only using the blank ink cartiage and not the color one!!!!! PLEASE HELP ME!!!!!!!

Hi stressedteacher,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are having an issue with the printer doing double sided print out's. So I can better assist you, Please respond with which Operating System you are running.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
I look forward to hearing from you and I am always happy to help.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Mac Microsoft Word 2008 double side printing

Hi.
I recently purchased Macbook Pro 15, and installed Microsoft Office 2008.
I have a SamSung Express 282 series laser printer.
When I use my window pc or window labtop, it double-side prints all right.
But when I try to double-side print with Mac Pro Microsoft word 2008, it doesn't work.
From the Print menu, I go to 'printer feature' and click on 'reverse two-sided printing', but it keeps saying
"Changing the setting of Reverse Two-Sided Printing to On would cause a conflict that cannot be resolved. No change will be made,"
and does not let me click on it.
Does anyone know what's going on?
I really want to save some trees and do only double-sided printing, but it doesn't let me.
Any help would be greatly appreciated.
Thanks, guys.

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_s eries/pixma_ip4200#DriversAndSoftware
Be sure to pick the OS X Lion 10.7 driver from the pulldown menu before selecting the driver category below it.
If that doesn't work, contact Canon. There are some Lion supporting double sided printers for sure.
Mind you,when manufacturers rely on the CUPS drivers as they did in this instance they may have
taken the easy way out, and that might avoid having the double sided printing.
http://support.apple.com/kb/dl899 may be able to patch those drivers to give you double sided printing if the Canon ones do not.
There are a few other open source alternatives*.
When double sided printing doesn't work, the trick is to rotate the pages upside down and feed face down switching odd and even page numbers.
Test with single sheets first, and then once you get the hang of it, do multiple.
I don't know where your printer feeds, so you'll have to try a couple times to figure out the correct direction.

Double Side printing in Lion?

Ever since I upgraded to Lion I've noticed that I cannot double side print in Reader. Other apps are set to double side print without issues, but I can't get Reader to DSP. I have Adobe Reader X (10.1.0), Mac OS 10.7.1 and a Lexmark Prevail Pro705. I've even gone to the Lexmark site and updated my driver. Any thoughts? I checked the sticky on the Forum Homepage about Lion compatability, but I was unsure how to translate the work around to my situation.

I ran into the same issue - Adobe Reader does not print double sided on my Lexmark Genesis S815. Did you find a solution in the meantime?

Anybody here have try the double-side printing?

It doesn't work when I try to do the double-side printing. And in the schedule info, it is Single-side --!!. Of course our printer support the double-side printing.So,any idea about this?
And I add the filter to transform the pdf to ps,is this the possible reason that the tray selection and double-side printing do not work?

To print on both sides (Duplex Mode), you have to
1.Have a Postscript ready printer.
2.Install Pasta
3.Install and Setup third party software like xpdf or Ghostscript to convert the PDF to PS file
4.Setup Printer Style and Pasta Config file
a.Define custom print style like 'Duplex PDF Publisher'
b. Assign this print style to Printer Type with with standard PASTA driver 'PASTA_PDF'
c.Then query printer driver 'PASTA_PDF' and on the arguments field, enter following -pn$PROFILES$.PRINTER -f$PROFILES$.FILENAME -c$PROFILES$.CONC_COPIES -Fpasta_pdf.cfg
d. Verify that the file $FND_TOP/resource/pasta_pdf.cfg is present and that it contains only one "uncommented" entry corresponding to the installed third party tool, as follows:
preprocess=pdftops -duplex {infile} {outfile}
pdf2ps (Ghostscript) by itself does not support the duplex option. You will need to use XPDF software (pdftops).

Double side print

I can't double side print because the pdf size is always changing & my printer only will do the double side print if the document is standard size 8x11. How can I change the size of my adobe so it defaults to the required 8x11?

That is specified when the document is created.
But in your case, can't you get it to print when changing Page Size & Handling, e.g. Fit, or Shrink oversized pages?

Automatic Double Side Printing

Here is HP LaserJet Enterprise 600 Series Printer manual check page 117 for settings with screenshots how to set up automatic both sides printing.

Hi Team,
I am using an HP LaserJet Enterprise 600 Series Printer, can I print on both sides automatically without manually feeding the paper back into the printer? If so print share some of the step to achieve that and also assist me with a video link if there is any.
Thank you.
This topic first appeared in the Spiceworks Community

Crystal report: client-side printing problem

Hello everyone,
I developed an asp.net web application / c # - VS2012 - crystal Repport (CRforVS_13_0_5) on windows 7 pro 32 bits, everything is ok even print reports.
The problem is that when hosting the web application in IIS on the same machine (Windows 7 pro 32 bit) printing the report (crystal report) does not work;
my code behind:
ReportDocument cryRpt = new ReportDocument;
string path = "../rpt/demande.rpt";
cryRpt.Load(Server.MapPath(@path));
ParameterFieldDefinitions crParameterFieldDefinitions;
ParameterFieldDefinition crParameterFieldDefinition;
ParameterValues crParameterValues = new ParameterValues();
ParameterDiscreteValue crParameterDiscreteValue = new ParameterDiscreteValue();
crParameterDiscreteValue.Value = "value";
crParameterFieldDefinitions = cryRpt.DataDefinition.ParameterFields;
crParameterFieldDefinition = crParameterFieldDefinitions["val"];
crParameterValues = crParameterFieldDefinition.CurrentValues;
crParameterValues.Clear();
crParameterValues.Add(crParameterDiscreteValue);
crParameterFieldDefinition.ApplyCurrentValues(crParameterValues);
cryRpt.SetDatabaseLogon(user, pw);
CrystalReportViewer1.Visible = true;
CrystalReportViewer1.ReportSource = cryRpt;
cryRpt.PrintToPrinter(1, false, 0, 0);
how to print the report on the client side?

The search term 'crystal net client side print' brings up the following (amongst many other):
KBA: 1214466 - How to print a report from a .NET Web application
KBA: 1216932 - How to print directly to a printer instead of PDF in a CR 10 ASP.NET application
KBA: 1983821 - How to achieve client side printing without using the Crystal Reports viewer
The above should help you out. BTW.; the search box is in the top right corner.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Double side printing through SAPLPD ?

we have defined a few printers which use the SAPLPD
now we have 2 printers which use SAPLPD
LOCL with the type SAPWIN -> driver SWIN SAPlpd/SAPWIN driver
and
LO02 with the type HPLJ4 -> driver HPL2 HP LaserJet driver PCL4
If I have defined in my windows printer that I want it double sided and with a staple then the LOCL respects the local settings in the windows printer (but the layout is horrible since not everything is recognized correctly)
with LO02 the layout is correct but the print is not double sided and not with a staple ??
anybody got a clue how I can define a SAPLPD printer which has enough font settings etc possibilities to get the layout correct and still respects the local printersettings from windows concerning double sided printing ?
kind regards
arthur de smidt

I found out that the SAPWIN printer could not handle HELVE and times properly. with arial installed the layout is much better and no strange behaviour in sapscripts

Double-sided printing problem Acrobat Pro

I am trying to print pdf docs (downloaded from scientfic journals) and do right thing by manual doubled-sided printing i.e. print even pages first in reverse, turn paper over and then print odd pages.
When I first print even pages in reverse it prints second page twice and when I print odd pages it does not print last page.
I have doing this for last 5 years using older versions of Acrobat Professional with no problems.
Windows XP Professional - Have lastest updates on Acrobat.
Thank you.

>I have doing this for last 5 years using older versions of Acrobat Professional with no problems.
and what version are you using now?

10.6.8 and Canon IJ Double-side Printing

I have a Macbook Pro running OS 10.6.8, and a Canon Inkjet Printer (MP276). However, I can't get print duplex/double-sided printing when printing from my Mac. When printing, selecting the "Layout" dropdown option, the "Two-Sided" option is greyed out.
This problem existed with my older HP printer too. This only seems to be the case with my Mac as my other laptops running Windows can print double-sided.
Could someone render me some assistance please?

I think its under the Tab Pages to sheet
My Epson I select Layout and then select 2 sided
Select that tab and see what the options are
selecting the "Layout" dropdown option, the "Two-Sided" option is greyed out.

Keeping the double side printing box ticked

I want to do double sided printing. I tick the box and all is OK. But next time I find the box has unticked itself and I have to start all over again with system preferences/print and scan/ select printer/ open print queue/setup/driver/ tick the box. How do I make the box STAY ticked? It used to stay ticked but now defaults to unticked after each double sided print job.

To print on both sides (Duplex Mode), you have to
1.Have a Postscript ready printer.
2.Install Pasta
3.Install and Setup third party software like xpdf or Ghostscript to convert the PDF to PS file
4.Setup Printer Style and Pasta Config file
a.Define custom print style like 'Duplex PDF Publisher'
b. Assign this print style to Printer Type with with standard PASTA driver 'PASTA_PDF'
c.Then query printer driver 'PASTA_PDF' and on the arguments field, enter following -pn$PROFILES$.PRINTER -f$PROFILES$.FILENAME -c$PROFILES$.CONC_COPIES -Fpasta_pdf.cfg
d. Verify that the file $FND_TOP/resource/pasta_pdf.cfg is present and that it contains only one "uncommented" entry corresponding to the installed third party tool, as follows:
preprocess=pdftops -duplex {infile} {outfile}
pdf2ps (Ghostscript) by itself does not support the duplex option. You will need to use XPDF software (pdftops).

Laserjet 1536 double side printing problem

Similar Messages

Maybe you are looking for