Laserjet 200 color m251 won't print in office picture manager

Windows 7 pro, service pack 1. HP laserjet 200 color m251 pcl6 will not print in office picture manager or photo viewer. will print using quick time.
any suggestions?

Hello BrokerDen.
I understand your Laserjet 200 printer is unable to print from office picture manager or photo viewer. Have you tried to uninstall and reinstall these programs to see if this resolves your issue?
Something else you can try is applying an alternate print driver that could be compatible with your programs. Please follow these instructions in this thread. 
How is this printer connected? Wireless or USB.
Let me know if this resolves your issue.
Looking forward to hear from you.
I worked on behalf of HP.

Similar Messages

  • Laserjet 200 color m251 install failed

    I cannot get my LaserJet 200 Color M251 software to install.  The first install screen gets to 100% and then instantly jumps to an Error message with no error code.  I'm running Windows 7 (64bit) and successfully installed this on another computer runnning the same.  I've tried restarting, checked that spooler is running and everything I can think of short of reinstalling Windows.  Any help? 

    I'm having this same problem with the same screen popping up at 91% installation progress. I'm running Windows 8.1 64 bit. I've tried both the CD and the downloaded version with the same results. I did originally have it installed from the CD, but the printer was always indicating that it was offline, but I could print from my other laptop (Windows 7). That's when I went to HP online and used the downloaded program. When I ran it, it deleted the version I had already installed. Any help will be greatly appreciated. Thanks.

  • Laserjet pro 200 color MFP won't print cyan

    My HP LaserJet Pro 200 color MFP M276nw printer has stopped printing cyan.  It does it for files sent to the printer as well as just trying to make a copy.  The cyan cartridge has been replaced and status shows full.   I've run all the onboard diagnositics, cleaning page, etc. with no luck.  How do I determine the problem and fix it?

    Hi , Thanks for getting back to me! It's not abnormal to see some print quality issues once your toner is lower that 20%. Were you able to complete the steps in the document that I sent? Is there any cyan on the print quality printout at all? If not, it could be a defective toner cartridge. I would suggest contacting HP Support to inquire about a replacement if it is a Genuine HP toner cartridge.**Fill in the model number and the form to receive a case number for quicker assistance. If a replacement toner cartridge does not resolve the issue, then it's possible that the printer may need to be serviced. Hope this helps!Thanks again for posting, and have a great day.

  • Laserjet 200 color M251 cannot connect to ePrint service

    The printer is installed successfully to my home network wirelessly and I am able to print from my wireless laptop. When I have tried to enable the ePrint it fails to connect. My first try was by using my browser to go to the printer's IP address. On the "Web Services Setup" page I clicked the Enable button and waited. It failed to print the Information Sheet that the instructions indicated. So I went to the printer's touch screen and tried to print it from there. That produced the error message "Connection error: 500..." indicating it could not connect to the service. I then shut off both my PC' firewall and my router's firewall and retried. No joy. All the PCs and my Iomega NAS have no issues with connecting to the Internet so I cannot think of why the printer should have a problem.
    I'd appreciate any advice on how to proceed.

    @Old60sHippie 
    Okay something is wrong here because resetting the printer should not have required you to reinstall the software on your PC. So I am a little puzzled at that on one. What version of the software did the cd install? You can find this out by going to printer properties and the about tab. If you don't have the following version: Version 61.117.01.1530. Then I would definately consider uninstalling your current software and updating to this one.
    Now to wireless direct - this is not required for web services but if you turn it on you will be able to print directly from your mobile device to your printer. If using this method you will have no access to the internet. If using this method for printing, remember to hook back into your wi-fi for other services.
    Again, I would encourage you to update your software driver/installer before going any further.
    m251 Product page
    Now back to the other issue of connecting to web services, I have tested this repeated this morning and have been able to successfully disable and re-enable web services with the information sheet printing out. The only difference in our set up in mine is networked. So if you don't mind and have the capibility, try networking your printer, see if you can connect to web services then set up the wireless connection. A little clunky but our goal is to get you connected...
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Loading the laserjet pro 200 color m251 nw one sheet at a time?

    How are you supposed to load the laserjet pro 200 color m251 nw one sheet at a time?

    Hi Choffman,
    Thank you for visiting the HP Support Forums! To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • LaserJet 200 color MFP printer - one laptop can print while the other laptop at home can't.

    My boyfriend and I set up the LaserJet 200 color MFP printer at home and installed the software on both our laptops.  I have a Dell Inspiron 700m and he's got the Lenovo T400.  I have been able to print any time from my laptop, but my boyfriend has only been able to print one document and after that there is a printer error and is not able to print nor troubleshoot.  I uninstalled and re-installed the software one more time, and again, he was only able to print one document and after that, printer error again (does not specify error).  Meanwhile, I continue to be able to print without a problem.  Anything I may be overlooking? Any help will be appreciated.

    What OS are you using?
    Which of the LaserJet 200 series printers do you have? There are several in that series and I want to make sure I'm helping with the right one.
    How is the printer connected to the computers?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Laserjet pro 200 color mfp m276nw stop printing memory low

    laserjet pro 200 color mfp m276nw stops printing giving an error message that the is memory low. How do I clear the memory?

    I have had the same issue, cannot print multiple pages without having the memory low error appear.  I have cleared the faxes from the setting menu. I have done an NVRAM reset and am able to print a 3 page document once and then receive the low memory error when I attempt to print another 3 page document. Please PM me the way to resolve this problem.  Thanks in advance.

  • HP LaserJet 200 color M251nw prints, but images are blurred.

    Laserjet200 (HP LaserJet 200 color M251nw) prints, but images are blurred; sometimes the entire page and other times just the right half. Staples tech said the drum could be bad. Can this be corrected? Using W7 ultimate OS.

    Hi @jimmanning ,
    I see by your post that the images are blurred. I would like to help you.
    Run a calibration on the printer.
    On the printer touch the wrench, system setup, print quality, color calibration calibrate now.
    Print a Diagnostics Page to see if you have the same results. Trying to determine if it is a hardware or software issue.
    Go to Setup, Reports, arrow down and select Diagnostics Report.
    I have provided a document with more steps for running a cleaning and checking print driver settings.
    Troubleshooting Print Quality Issues.
    Remove the toner and check to see if there is any toner on drum.
    Make sure the paper type is selected to the media that you are using, not the default setting unspecified.
    Please provide the following information so I can assist you better.
    What were the results of Diagnostics Page and Print Quality Page?
    Are you using Genuine HP Toner?
    What are the Ink levels?
    Was there any damage on the toners?
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet 200 Color M251NW

    Hey Yall, I've been searching and watching videos, but it seems like my problem is more complex than it should be.
    I just purchased a LaserJet 200 Color M251nw and I use a Macbook runnining on Mavericks OSx (10.9.2)
    Two-Sided Printing is why I purchased it, besides it being a good deal and having Laser Technology..
    PROBLEM: I can't seem to ENABLE double-sided printing. I have installed latest drivers, and here's the kicker, there is no "driver" tab for my printer to allow me to "checkbox" Duplex Printing that I have been seeing on other support pages. The only TABS i see are the Utility and General. I've seen the Driver tab for previously owned printers but not this one. 
    PLEASE help!!!

    Hi HDRogerMartin,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand you would like to know how to set the two-sided printing.
    I will be happy to help you.
    This information is provided by the Manual on page 38.
    LASERJET PRO 200 COLOR.
    Print on both sides (Mac OS X)
    1. Insert enough paper into one of the trays to accommodate the print job.
    2. On the File menu, click the Print option.
    3. Open the Finishing menu, and click the Manual Duplex tab or open the Manual Duplex menu.
    4. Click the Manual Duplex box, and select a binding option.
    5. Click the Print button. Follow the instructions in the pop-up window that appears on the computer
    screen before replacing the output stack in Tray 1 for printing the second half.
    6. Go to the product, and remove any blank paper that is in Tray 1.
    7. Insert the printed stack face-up with the bottom edge feeding into the printer first in Tray 1.
    8. If prompted, press the appropriate control-panel button to continue.
    You can also set this as a preset.
    Create a printing preset for Mac.
    1.On the File menu, click the Print option.
    2.Select the driver.
    3.Select the print settings that you want to save for reuse.
    4.In the Presets menu, click the Save As… option, and type a name for the preset.
    5.Click the OK button.
    Use printing presets
    1.On the File menu, click the Print option.
    2.Select the driver.
    3.In the Presets menu, select the printing preset.
    Hope this helps.
    Thank you for posting on the HP Forums.
    Have a wonderful day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet 200 color MFP M276nw - cannot connect

    Hello,
    Installed a HP LaserJet 200 color MFP M276nw on a Windows 7 system with no issues.  Then added the "device" / printer on two Windows tablets, with no issues.  I was able to print from all three devices.  The tablets cannot 'find' the printer.
    I then added the printer to another Windows 7 system and now cannot connect from the other systems.  I am still able to print from the second Windows 7 system.  (I removed the printer from the second Windows 7 system and readded it without issue, and ensured Share the Printer was selected).
    Please advise.  Should I just return the printer?

    Wireless Network Configuration
    Status: Connected Wireless: On
    Network Name (SSID): xxxxxxxxx
    Communication Mode: Infrastructure Authentication
    Type: wpa2-psk
    Encryption: tkip+aes
    Hardware Address: xxxxxx Access Point Hardware Address: xxxxxx
    Channel: 6
    Signal Strength: Very Good 
    ***Marked out some of the settings***

  • Laserjet 200 color

    I have a Laserjet 200 Color printer.  I have replaced the ink cartridges but I still get skips in the printing.  There is no rhyme or reason as the area that is missing ink varies.  Any suggestions to clear up the problem or do I need a new printer?

    Hi @mbrooks11,
    I see that you are having issues with the ink missing on the print outs. I can help you, but I will need some more information so I can provide the proper steps to try and resolve this issue.
    I would suggest to run a cleaning and a calibration on the printer.
    What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected? (USB/Ethernet/Wireless)
    Are you using Genuine HP Toner?
    What are the toner levels?
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp Laserjet 200 Color MFP M276nw Fax error report

    Hi Team
    Will you please assist me in turning off , Fax error report ?
    I have checked all the settings on this machine , i cant't find this setting, i want to turn off the error report on failed/error
     faxes.
    Regards
    James R

    Hi JamesR25,
    Welcome to the HP Support Forums! I see you would like to turn off the Fax error reports on your HP Laserjet 200 Color MFP M276nw.
    From the front panel of your LJ, please follow the path below:
    Setup Menu > Fax Setup > Advance Setup > Allow Fax Reports > NO or Off
    You should not receive anymore fax error reports.
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Hp laserjet pro 200 color mfp m276nw no print preview

    Hello Folks,
    I have windows 7 64 bit HP laserjet pro 200 color mfp m276nw and do not see a print preview option. Is there a way to get this? In Linux I use print to ps file and ghostscript to view. Our oldink jet had a print preview option. I did see a message for another printer that there is no solution. Any help would be appreciated.
    Thanks
    timkat

    Hi @Timkat ,
    I understand that you would like to know if the printer has a print preview option. I can help you.
    You would have to use the print preview, from the application that you are printing from, under File, Print Preview.
    Most applications have this feature.
    Hope this helps.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp laserjet pro 200 color MFP M276n not printing PDF documents

    Hello
    I am having problems printing PDF documents from our hp laserjet pro 200 color MFP M276n.
    I get a blank sheet of paper and a message on the printer saying 49 service error - turn off then on
    I can print word/excel documents.
    Many thanks
    Karen

    Hi,
    As I understand you get a 49 error while printing PDF document from hp laserjet pro 200 color MFP M276n.
    Kindly follow these steps to resolve the issue.
    1. Open the PDF document you want to print.
    2. Click File > print > Click on the Advanced option > select the print as image option.
    though I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution

  • LaserJet Pro 200 color M251nw does not print from internet

    I have a LaserJet Pro 200 color  M251nw, set up for wireless printing. It finally works when printing from Microsoft Word 2010, but refuses to do so from the internet.
    Can anyone help me?
    Thanks!
    SALLYANNC

    Hi @SALLYANNC,
    I see by your post that you are unable to print from the internet. I can help you with this.
    Run the Windows updates and update your browser.
    Try printing from another browser to see if you have the same results.
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    What internet browser are you using?
    What operating system are you using?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How to Find the Windows Edition and Version on Your Computer.
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for