LaserJet 200 color MFP printer - one laptop can print while the other laptop at home can't.

My boyfriend and I set up the LaserJet 200 color MFP printer at home and installed the software on both our laptops. I have a Dell Inspiron 700m and he's got the Lenovo T400. I have been able to print any time from my laptop, but my boyfriend has only been able to print one document and after that there is a printer error and is not able to print nor troubleshoot. I uninstalled and re-installed the software one more time, and again, he was only able to print one document and after that, printer error again (does not specify error). Meanwhile, I continue to be able to print without a problem. Anything I may be overlooking? Any help will be appreciated.

What OS are you using?
Which of the LaserJet 200 series printers do you have? There are several in that series and I want to make sure I'm helping with the right one.
How is the printer connected to the computers?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

HP LaserJet 200 color MFP M276nw - cannot connect

Hello,
Installed a HP LaserJet 200 color MFP M276nw on a Windows 7 system with no issues. Then added the "device" / printer on two Windows tablets, with no issues. I was able to print from all three devices. The tablets cannot 'find' the printer.
I then added the printer to another Windows 7 system and now cannot connect from the other systems. I am still able to print from the second Windows 7 system. (I removed the printer from the second Windows 7 system and readded it without issue, and ensured Share the Printer was selected).
Please advise. Should I just return the printer?

Wireless Network Configuration
Status: Connected Wireless: On
Network Name (SSID): xxxxxxxxx
Communication Mode: Infrastructure Authentication
Type: wpa2-psk
Encryption: tkip+aes
Hardware Address: xxxxxx Access Point Hardware Address: xxxxxx
Channel: 6
Signal Strength: Very Good
***Marked out some of the settings***

Hp Laserjet 200 Color MFP M276nw Fax error report

Hi Team
Will you please assist me in turning off , Fax error report ?
I have checked all the settings on this machine , i cant't find this setting, i want to turn off the error report on failed/error
faxes.
Regards
James R

Hi JamesR25,
Welcome to the HP Support Forums! I see you would like to turn off the Fax error reports on your HP Laserjet 200 Color MFP M276nw.
From the front panel of your LJ, please follow the path below:
Setup Menu > Fax Setup > Advance Setup > Allow Fax Reports > NO or Off
You should not receive anymore fax error reports.
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Can't see the other person, but they can see me. A...

i was wondering if it is possible, this person i believe uses a Android or Iphone, for the camera to be turned off for video chat? I can never see the other person but they can see me - and i can see myself during the video chat. My video which they see i also see takes up the whole screen. This issue also is the same for when i use Windows and video chat with this person.

Hello pfierrobb:
You have to enable it in SKYPE. Open up Sykpe click on tools then select options . When that windows opens select video settings. Then you well see select webcam click on White box select your web cam choices. Windos 7 HP computers it is called HP web camra filter. I just close out the filter stuff if I am not using it during chat session. Some HP computers call it cybrlink web cam. If your web cam isn't listed yet the web cam still works in other applications your Skype software might be corrupted. Just uninstall Sykpe and reinstated it back with a new copy download http://www.skype.com/en/download-skype/skype-for-computer/ If you are still having issues please let us know. Thank you frrw.

HP LaserJet Pro 200 color MFP M276 - not able to print black when any color is empty

Hi,
We have 2x HP LaserJet Pro 200 color MFP M276n in our office, both have firmware date code 20121026.
The problem is that when ever one of the colored toner cartridges gets empty it fails to print even black & white documents and freezes in the replace cartridge screen.
In system supplies settings it is configured to print only black when colored supplies are below very low threshold limit.
Since the printer is freezing in the warning screen and only powering it off and on helps to bring it back alive, it seems that this is a software or firmware issue. I didnt find any firmware updates for this model though.
It doesnt make any sense that it is not possible to use the printer at all when only one of colored cartridges is empty. Any thoughts on how to solve this issue are welcome.

Hi,
The firmware that you have mentioned is old and the latest version available is
Version
20131216
it is always advisable to update the printer to the latest firmware. Please update the firmware form the given link
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108130-4&cc=us&dlc=en&lc=en...
Hope this helps....
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Can ecm mode be adjusted in HP LaserJet 200 color MFP M276

cannot receive faxes.

pricenm,
Welcome to the HP Community Forum.
This model provides some limited adjustment capability as mentioned in the User Guide:
Excerpted:
Set the fax-error-correction mode
Usually, the product monitors the signals on the telephone line while it is sending or receiving a fax. If
the product detects an error during the transmission and the error-correction setting is On, the product
can request that the portion of the fax be resent. The factory-set default for error correction is On.
You should turn off error correction only if you are having trouble sending or receiving a fax, and you
are willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax overseas or receive one from overseas, or if you are using a satellite telephone
connection.
1. From the Home screen, touch the Setup button.
2. Touch the Service menu.
3. Touch the Fax Service menu.
4. Touch the Error Correction button, and then touch the On button.
Change the fax speed
The fax-speed setting is the modem protocol that the product uses to send faxes. It is the worldwide
standard for full-duplex modems that send and receive data across telephone lines at up to 33,600 bits
per second (bps).
The factory-set default for the fax-speed setting is Fast (V.34).
You should change the setting only if you are having trouble sending a fax to or receiving a fax from a
particular device.
Decreasing the fax speed might be useful when you are trying to send a fax overseas, or receive one from overseas, or if you are using a satellite telephone connection.
1. From the Home screen, touch the Setup button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Scroll to and touch the Fax Speed button, and then touch the speed setting that you want to use.
==============================================================
Reference:
HP LaserJet Pro 200 color MFP M276n
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Fax Problem on HP laserjet 200 color MFP M276nw

HP Laser Jet 200 color MFP M276nw
fax problem
I continue to get fax confirmation pages even though the message is "no fax detected" and "0" page. I get several of these a day with no accompanying fax on my HP200 Color MFP
Has anyone had this problem?

Hi @ColtraneII,
I understand you are getting fax confirmation pages printing serveral times a day with the message "no fax detected".
I can help you with this issue today.
Check these settings for the fax:
Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
Go to the wrench icon/service /fax service/error correction/turn it off.
Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
Go to wrench icon/service menu/fax service/clear saved faxes.
If you are still having issues, then follow this document for checking the connections and settings for the fax.
Cannot Send or Receive Faxes.
Sorry for all the questions, but it will help to resolve this issue quicker.
What were the results of the fax test?
Are you able to send or receive faxes?
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using the 2 wire fax cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to?)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet 200 color mfp m276nw print black not grayscale

I'm told the printer will print even black-and-white documents using "grayscale," which I'm told means it is using the color cartridges even to print black and white documents. Is there some way I can change this so that it prints black and white documents with only the black ink cartridge? I'm using Mac.

Hi Balderol,
I understand you would like to print black only. I found a document that will help guide you through the steps to set your print settings. This document says it is for 10.3 an d10.4, but the instructions will apply to the newer Mac versions as well. Mac OS X: Printing with the Black Print Cartridge Only Option.
I hope this is helpful.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Domain name is blank on laserjet 200 color MFP m276

I received this item today but I'm unable to add it to my home network.I've had no trouble previously with an HP 2610, 1102W, and 7520.
On this network, a verizon DSL modem feeds a Linux firewall,which provides routing/DNS/etc. to the computers on the net via several switches and a wireless access point. Everything has a name in the form of "nicename.mynetworkname.net" and a static IPv4 address, and the firewall enforces the rules.
I've tried to tell the control panel on the new laserjet everything I can manage to feed it.
The new laserjet is connected to one of the switches by an ethernet cable. The cable connectors on the printer and the main switch show orange lights, indicating no valid ethernet connection. A printout of the Network Summary shows
Status (wired) =Ready
IPv4Address =192.168.nnn.mmm (the value I gave it manually) and an appropriate subnet mask and default gateway value.
Network Identification shows
Host Name =NPIDD2A25 (the value assigned by HP)
but the Domain Name is blank. I could not find a way to change it to mynetworkname.net.
So the printer apparently thinks it's not on the net. And computers on the net can discover the printer but can't use it.
This setup has worked fine for previous printersthat worked by ethernet. I don't see what I'm doing wrong here.
Tips?
... Rich

Hi KathFallston,
I understand that you are unable to receive any faxes and everything passes on the fax test. I can
help you.
Check these settings for the fax:
Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
Go to the wrench icon/service /fax service/error correction/turn it off.
Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
Go to wrench icon/service menu/fax service/clear saved faxes.
If you are still having issues, then follow this document.
Cannot Send or Receive Faxes.
What type of connection do you have? (Analogue, DSL, Cable Modem)
Is there any voice mail set up?
Do you have distinctive ring set up on the line?
If you need further assistance, just let me know.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Network Configuration for HP LaserJet 200 color MFP M276nw

Can the HP LaserJet 200 M276nw can be configured to scan to a network folder without initial set-up from a PC? Without the need of initially connecting the device to a computer first.
We are running a virtual environtment and the printer will need to scan to a configured network folder and this should be done via the device. Of course folder permisisons will be completed prior. I believe I saw a manual where the Embeded web server had this configuration, but would to make sure prior to committing to the purchase. Thanks in advance.
This question was solved.
View Solution.

You are gladly welcome.
Yes, the printer support the SMB protocol indeed.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Laserjet 200 color MFP M276n

Good morning,
i have a problem with this MFP that doesn't connect to web and so i cn't use eprint function.
I activate the web sercices and i obtained the eprint email address (i can read this by a browser pointing the ip of the mfp), but i can't print the "info page" of the eprint section, so i can't add the printer on the hp eprint center.
I'm sure that the ip assigned to the MFT can go in internet (i tried to set the same ip on a pc and it works; it can browse the web); i tried to power off-on; tried to disable/enable the web services, but it doesnt' work.
I cant print the "info page" in any way.
How can i try now?
Thanks and best regards.
Roberto

I would start by resetting the router and then if still having the issue I would set a static DNS on the Embedded web server (EWS) of the printer.
To reset the router:
1. Unplug the router (most do not have a on/off switch or button).
2. turn the printer off using the power button
3. Wait 30 seconds
4. Plug router back in, wait for it to be back up and fully functional.
5. Power back on the printer, wait for it to finish is start up process. Then reattempt to access and print information page.
If still not getting the page from the printer set a static DNS from the EWS
1. Pull up the EWS up and locate the tab titled "Networking".
2. Then on the left column locate the IPv4 and click on that.
3. Pay attention to the lower portion of the screen titled "DNS Address Configuration".
4. Fill out the Preferred DNS to read 8.8.8.8
5. Fill out the Alternative DNS to read 8.8.4.4
6 Click Apply. Be careful of any messages that appear afterwards with an "Ok" button, read it carefully it might be an offer to undo the change you
just made
7. Power printer off then back on and then after start up complete reattempt to retrive info page for the eprint set up
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Hp laserjet 200 color mfp m276 nw not receiving faxes - help please?

Good morning,
I have run the fax test report and followed the trouble shooting information in the manual and still am not receiving faxes --- any suggestions to help get back on line? All the tests say PASS for active phone line, phone cord connected to correct port, telephone line current test, dial tone detected on telephone line -- my HP product has passed the fax test -- but I cannot get faxes. The fax service log is saying no fax detected... any suggestions -- we use this fax to receive lab reports.
Thank you very much for any suggestions.

Hi KathFallston,
I understand that you are unable to receive any faxes and everything passes on the fax test. I can
help you.
Check these settings for the fax:
Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
Go to the wrench icon/service /fax service/error correction/turn it off.
Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
Go to wrench icon/service menu/fax service/clear saved faxes.
If you are still having issues, then follow this document.
Cannot Send or Receive Faxes.
What type of connection do you have? (Analogue, DSL, Cable Modem)
Is there any voice mail set up?
Do you have distinctive ring set up on the line?
If you need further assistance, just let me know.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet 200 Color MFP M276n

I have purchased this printer for a customer. Customer has 12 PCs running Windows 8.1. I have installed the printer (hardware) on the network with no problems.
Started to install software using CD and it stops with an error.
'A problem occurred while preparing to install software to your system. Please restart your computer and run the installer again. If the problem persists please check the product support web site for your product'.
MSIExec command /i"C:\Users\sdixon\Appdata\Local\Temp\7zS7ECE\Setup\Core\SIPM_64\HpTcpMon64_msi" /qn REBOOT=ReallySuppress
Path:<empty>
Return code:1603
I thought that it might be that the CD did not have software /drivers suitable for WIN 8.1 so downloaded latest from HP site - similar error!
Downloaded basic print driver and installed this with no problem but of course scanning does not work at all.
I believe the problem lies in the software that controls the installation.
Can anyone suggest how to get the scanning side of this printer working?
This question was solved.
View Solution.

Hello there! Welcome to the forums @stuk50 ,
I read about the MSI error you are running into when installing your printer, and I wanted to stop in with a suggestion for you!
Click this guide and follow the steps:
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
Good luck, I hope that helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Laserjet 200 color mfp change font

How do I change the fonts? I need to print labels and need to use a compressed print. I cannot find the how to's in manual. Is this done by a menu choice? Driver? Many thanks!!!

Hi @jeepster217 ,
I see that you would like to be able to change the font size to print. I would be happy to help you.
You would have to set the font size from the application that you are printing from. The print driver doesn't have any options to change this setting.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
What application are you using?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet 200 Colorful MFP 275nw windows 10 driver unavailable!

Just upgradded to Windows 10 from Windows 7. Driver for my printer (above) is listed as "unavailable" in Windows 10. Anybody know when it will be available? Thanks Rob

please help

LaserJet 200 color MFP printer - one laptop can print while the other laptop at home can't.

Similar Messages

Maybe you are looking for