Laserjet 200 color

I have a Laserjet 200 Color printer. I have replaced the ink cartridges but I still get skips in the printing. There is no rhyme or reason as the area that is missing ink varies. Any suggestions to clear up the problem or do I need a new printer?

Hi @mbrooks11,
I see that you are having issues with the ink missing on the print outs. I can help you, but I will need some more information so I can provide the proper steps to try and resolve this issue.
I would suggest to run a cleaning and a calibration on the printer.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
Are you using Genuine HP Toner?
What are the toner levels?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

LaserJet 200 color MFP printer - one laptop can print while the other laptop at home can't.

My boyfriend and I set up the LaserJet 200 color MFP printer at home and installed the software on both our laptops. I have a Dell Inspiron 700m and he's got the Lenovo T400. I have been able to print any time from my laptop, but my boyfriend has only been able to print one document and after that there is a printer error and is not able to print nor troubleshoot. I uninstalled and re-installed the software one more time, and again, he was only able to print one document and after that, printer error again (does not specify error). Meanwhile, I continue to be able to print without a problem. Anything I may be overlooking? Any help will be appreciated.

What OS are you using?
Which of the LaserJet 200 series printers do you have? There are several in that series and I want to make sure I'm helping with the right one.
How is the printer connected to the computers?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP LaserJet 200 Color M251NW

Hey Yall, I've been searching and watching videos, but it seems like my problem is more complex than it should be.
I just purchased a LaserJet 200 Color M251nw and I use a Macbook runnining on Mavericks OSx (10.9.2)
Two-Sided Printing is why I purchased it, besides it being a good deal and having Laser Technology..
PROBLEM: I can't seem to ENABLE double-sided printing. I have installed latest drivers, and here's the kicker, there is no "driver" tab for my printer to allow me to "checkbox" Duplex Printing that I have been seeing on other support pages. The only TABS i see are the Utility and General. I've seen the Driver tab for previously owned printers but not this one.
PLEASE help!!!

Hi HDRogerMartin,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you would like to know how to set the two-sided printing.
I will be happy to help you.
This information is provided by the Manual on page 38.
LASERJET PRO 200 COLOR.
Print on both sides (Mac OS X)
1. Insert enough paper into one of the trays to accommodate the print job.
2. On the File menu, click the Print option.
3. Open the Finishing menu, and click the Manual Duplex tab or open the Manual Duplex menu.
4. Click the Manual Duplex box, and select a binding option.
5. Click the Print button. Follow the instructions in the pop-up window that appears on the computer
screen before replacing the output stack in Tray 1 for printing the second half.
6. Go to the product, and remove any blank paper that is in Tray 1.
7. Insert the printed stack face-up with the bottom edge feeding into the printer first in Tray 1.
8. If prompted, press the appropriate control-panel button to continue.
You can also set this as a preset.
Create a printing preset for Mac.
1.On the File menu, click the Print option.
2.Select the driver.
3.Select the print settings that you want to save for reuse.
4.In the Presets menu, click the Save As… option, and type a name for the preset.
5.Click the OK button.
Use printing presets
1.On the File menu, click the Print option.
2.Select the driver.
3.In the Presets menu, select the printing preset.
Hope this helps.
Thank you for posting on the HP Forums.
Have a wonderful day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet 200 color MFP M276nw - cannot connect

Hello,
Installed a HP LaserJet 200 color MFP M276nw on a Windows 7 system with no issues. Then added the "device" / printer on two Windows tablets, with no issues. I was able to print from all three devices. The tablets cannot 'find' the printer.
I then added the printer to another Windows 7 system and now cannot connect from the other systems. I am still able to print from the second Windows 7 system. (I removed the printer from the second Windows 7 system and readded it without issue, and ensured Share the Printer was selected).
Please advise. Should I just return the printer?

Wireless Network Configuration
Status: Connected Wireless: On
Network Name (SSID): xxxxxxxxx
Communication Mode: Infrastructure Authentication
Type: wpa2-psk
Encryption: tkip+aes
Hardware Address: xxxxxx Access Point Hardware Address: xxxxxx
Channel: 6
Signal Strength: Very Good
***Marked out some of the settings***

Hp Laserjet 200 Color MFP M276nw Fax error report

Hi Team
Will you please assist me in turning off , Fax error report ?
I have checked all the settings on this machine , i cant't find this setting, i want to turn off the error report on failed/error
faxes.
Regards
James R

Hi JamesR25,
Welcome to the HP Support Forums! I see you would like to turn off the Fax error reports on your HP Laserjet 200 Color MFP M276nw.
From the front panel of your LJ, please follow the path below:
Setup Menu > Fax Setup > Advance Setup > Allow Fax Reports > NO or Off
You should not receive anymore fax error reports.
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Laserjet 200 color m251 won't print in office picture manager

Windows 7 pro, service pack 1. HP laserjet 200 color m251 pcl6 will not print in office picture manager or photo viewer. will print using quick time.
any suggestions?

Hello BrokerDen.
I understand your Laserjet 200 printer is unable to print from office picture manager or photo viewer. Have you tried to uninstall and reinstall these programs to see if this resolves your issue?
Something else you can try is applying an alternate print driver that could be compatible with your programs. Please follow these instructions in this thread.
How is this printer connected? Wireless or USB.
Let me know if this resolves your issue.
Looking forward to hear from you.
I worked on behalf of HP.

HP LaserJet 200 color M251nw prints, but images are blurred.

Laserjet200 (HP LaserJet 200 color M251nw) prints, but images are blurred; sometimes the entire page and other times just the right half. Staples tech said the drum could be bad. Can this be corrected? Using W7 ultimate OS.

Hi @jimmanning ,
I see by your post that the images are blurred. I would like to help you.
Run a calibration on the printer.
On the printer touch the wrench, system setup, print quality, color calibration calibrate now.
Print a Diagnostics Page to see if you have the same results. Trying to determine if it is a hardware or software issue.
Go to Setup, Reports, arrow down and select Diagnostics Report.
I have provided a document with more steps for running a cleaning and checking print driver settings.
Troubleshooting Print Quality Issues.
Remove the toner and check to see if there is any toner on drum.
Make sure the paper type is selected to the media that you are using, not the default setting unspecified.
Please provide the following information so I can assist you better.
What were the results of Diagnostics Page and Print Quality Page?
Are you using Genuine HP Toner?
What are the Ink levels?
Was there any damage on the toners?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet 200 color m251 install failed

I cannot get my LaserJet 200 Color M251 software to install. The first install screen gets to 100% and then instantly jumps to an Error message with no error code. I'm running Windows 7 (64bit) and successfully installed this on another computer runnning the same. I've tried restarting, checked that spooler is running and everything I can think of short of reinstalling Windows. Any help?

I'm having this same problem with the same screen popping up at 91% installation progress. I'm running Windows 8.1 64 bit. I've tried both the CD and the downloaded version with the same results. I did originally have it installed from the CD, but the printer was always indicating that it was offline, but I could print from my other laptop (Windows 7). That's when I went to HP online and used the downloaded program. When I ran it, it deleted the version I had already installed. Any help will be greatly appreciated. Thanks.

Can ecm mode be adjusted in HP LaserJet 200 color MFP M276

cannot receive faxes.

pricenm,
Welcome to the HP Community Forum.
This model provides some limited adjustment capability as mentioned in the User Guide:
Excerpted:
Set the fax-error-correction mode
Usually, the product monitors the signals on the telephone line while it is sending or receiving a fax. If
the product detects an error during the transmission and the error-correction setting is On, the product
can request that the portion of the fax be resent. The factory-set default for error correction is On.
You should turn off error correction only if you are having trouble sending or receiving a fax, and you
are willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax overseas or receive one from overseas, or if you are using a satellite telephone
connection.
1. From the Home screen, touch the Setup button.
2. Touch the Service menu.
3. Touch the Fax Service menu.
4. Touch the Error Correction button, and then touch the On button.
Change the fax speed
The fax-speed setting is the modem protocol that the product uses to send faxes. It is the worldwide
standard for full-duplex modems that send and receive data across telephone lines at up to 33,600 bits
per second (bps).
The factory-set default for the fax-speed setting is Fast (V.34).
You should change the setting only if you are having trouble sending a fax to or receiving a fax from a
particular device.
Decreasing the fax speed might be useful when you are trying to send a fax overseas, or receive one from overseas, or if you are using a satellite telephone connection.
1. From the Home screen, touch the Setup button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Scroll to and touch the Fax Speed button, and then touch the speed setting that you want to use.
==============================================================
Reference:
HP LaserJet Pro 200 color MFP M276n
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Fax Problem on HP laserjet 200 color MFP M276nw

HP Laser Jet 200 color MFP M276nw
fax problem
I continue to get fax confirmation pages even though the message is "no fax detected" and "0" page. I get several of these a day with no accompanying fax on my HP200 Color MFP
Has anyone had this problem?

Hi @ColtraneII,
I understand you are getting fax confirmation pages printing serveral times a day with the message "no fax detected".
I can help you with this issue today.
Check these settings for the fax:
Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
Go to the wrench icon/service /fax service/error correction/turn it off.
Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
Go to wrench icon/service menu/fax service/clear saved faxes.
If you are still having issues, then follow this document for checking the connections and settings for the fax.
Cannot Send or Receive Faxes.
Sorry for all the questions, but it will help to resolve this issue quicker.
What were the results of the fax test?
Are you able to send or receive faxes?
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using the 2 wire fax cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to?)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP laserjet 200 color M251nw color issue

hey ppl, new here. we have an HP 200 color M251nw that will only print black and white. Well using the black toner cartridge and not the others. I've checked the printer properties and all color sections seem enabled. I am going to try an updated driver to see if that'll help. Seems like a setting not turned on..??? Any help with this is appreciated.
-J

Hi @techie211 ,
I see by your post that you are not able to print in color. I can help you.
Run a calibration on the printer.
On the printer touch the wrench, system setup, print quality, color calibration calibrate now.
Print a Diagnostics Page to see if you have the same results. Trying to determine if it is a hardware or software issue.
Go to Setup, Reports, arrow down and select Diagnostics Report.
Here is a screen shot.
I have provided a document with more steps for running a cleaning and checking print driver settings.
Troubleshooting Print Quality Issues.
Make sure the paper type is selected to the media that you are using, not the default setting unspecified.
Please provide the following information so I can assist you better.
What were the results of Print Quality Page?
What are the Ink levels?
What operating system are you using?
How to Find the Windows Edition and Version on Your Computer.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Ethernet/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Network Configuration for HP LaserJet 200 color MFP M276nw

Can the HP LaserJet 200 M276nw can be configured to scan to a network folder without initial set-up from a PC? Without the need of initially connecting the device to a computer first.
We are running a virtual environtment and the printer will need to scan to a configured network folder and this should be done via the device. Of course folder permisisons will be completed prior. I believe I saw a manual where the Embeded web server had this configuration, but would to make sure prior to committing to the purchase. Thanks in advance.
This question was solved.
View Solution.

You are gladly welcome.
Yes, the printer support the SMB protocol indeed.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cold RESET For HP laserjet 200 color M251n

Dear Support,,
I Have joined To new Organization And I was Requested to install Hp Laserjet 200 m251n in a new remote site
when i tried to enter it is asking for Password ( Secured )
i know the saved ip Address But I Am not Able to change it
so is there any way to cold Reset Factor Setting for the Printer
thanks & Regards
Sadek

Hi @Mfsadek ,
I see by your post that you need to reset the printer.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Domain name is blank on laserjet 200 color MFP m276

I received this item today but I'm unable to add it to my home network.I've had no trouble previously with an HP 2610, 1102W, and 7520.
On this network, a verizon DSL modem feeds a Linux firewall,which provides routing/DNS/etc. to the computers on the net via several switches and a wireless access point. Everything has a name in the form of "nicename.mynetworkname.net" and a static IPv4 address, and the firewall enforces the rules.
I've tried to tell the control panel on the new laserjet everything I can manage to feed it.
The new laserjet is connected to one of the switches by an ethernet cable. The cable connectors on the printer and the main switch show orange lights, indicating no valid ethernet connection. A printout of the Network Summary shows
Status (wired) =Ready
IPv4Address =192.168.nnn.mmm (the value I gave it manually) and an appropriate subnet mask and default gateway value.
Network Identification shows
Host Name =NPIDD2A25 (the value assigned by HP)
but the Domain Name is blank. I could not find a way to change it to mynetworkname.net.
So the printer apparently thinks it's not on the net. And computers on the net can discover the printer but can't use it.
This setup has worked fine for previous printersthat worked by ethernet. I don't see what I'm doing wrong here.
Tips?
... Rich

Hi KathFallston,
I understand that you are unable to receive any faxes and everything passes on the fax test. I can
help you.
Check these settings for the fax:
Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
Go to the wrench icon/service /fax service/error correction/turn it off.
Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
Go to wrench icon/service menu/fax service/clear saved faxes.
If you are still having issues, then follow this document.
Cannot Send or Receive Faxes.
What type of connection do you have? (Analogue, DSL, Cable Modem)
Is there any voice mail set up?
Do you have distinctive ring set up on the line?
If you need further assistance, just let me know.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet 200 color mfp m276nw print black not grayscale

I'm told the printer will print even black-and-white documents using "grayscale," which I'm told means it is using the color cartridges even to print black and white documents. Is there some way I can change this so that it prints black and white documents with only the black ink cartridge? I'm using Mac.

Hi Balderol,
I understand you would like to print black only. I found a document that will help guide you through the steps to set your print settings. This document says it is for 10.3 an d10.4, but the instructions will apply to the newer Mac versions as well. Mac OS X: Printing with the Black Print Cartridge Only Option.
I hope this is helpful.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Laserjet 200 color

Similar Messages

Maybe you are looking for