Laserjet 200 firmware update - "Something is bad with your device"

When trying to update the firmware on my HP LaserJet 200 color M251nw I get:
"Something is bad with your device. Device is in error state and cannot be reflashed because of this. Resolve the problem and try again.".
However the device looks ok, no errors on screen, logs, checked Web UI for hints, reboothing doesn't change the issue....
Current firmware is 20121026.
Thanks for your help!

Hi,
I just check the system requirement on the firmware update page, it doesnt mention MAC.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-108129-7&cc=us&dlc=en&lc=en...
Can you try updating it by conecting it to a windows PC if you have any?
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Similar Messages

HP LaserJet 1518ni - Firmware update doesn't do anything

Hello folks
I am trying to update my HP LaserJet 1518ni to the latest Firmware (2013-11-08 , Version20130923, 4.22M).
My current firmware datecode is: 20120110
I went here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3422472
Downloaded the file CP1510_Series_FW_Update-20130923.exe
Turned Firewall and AntVirus OFF, ran the Executable with administrative priviliges - it says it found the printer and I see a progress bar and also the smiley at the end. But the printer is unimpressed and shows just "Ready" in the LCD, nothing changed: The files does simply nothing.
Tried it via IP Port and also USB on another PC, same effect.
What is going wrong?
Where are the good old .RFU Files I just can TFTP to the printer...?
Thanks,
Thomas
This question was solved.
View Solution.

Hello @TomPe , and welcome to the HP Forums!
I see you're experiencing firmware issues. I'd like to help!
I would recommend performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then suggest downloading and running the HP Print and Scan Doctor.
Once you have run the doctor, try installing the firmware via this tool:
HP Color LaserJet Printer Firmware Update Utility
Also, can you print standalone? I would recommend pressing the right arrow until you see reports, press OK, select diagnostics page, and press OK.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

RVS4000 firmware updates don't work with Internet Explorer 8.0

I have 2 RVS4000 VPN routers. Neither would accept firmware updates via the admin browser interface using Internet Explorer 8.0. After lots of troubleshooting, I tried Chrome (Google) on 1 router and Mozilla Firefox on the other. Both updates were successful. The firmware rescue utility that you can download from the Cisco web site also works. It does the update without the browser interface, but installs a slightly older version of firmware than is availble for browser-based firmware updates. I hope this saves you time and frustration when you need to update your routers.
Rene Feitelson

Rene,
A thousand thanks for taking the time to post your result. You've made my day!
I have spent over 8 hours today trying to implement a firmware upgrade on my RVS4000, with zero success. I initially used Safari 5 (on a Win XP SP3 machine) in order to update IPS to v1.42, with no success. Switching to MS IE8 and the update worked fine - hence I stuck with IE8 for the firmware update. I can confirm your result - IE8 does not initiate a firmware update, nor does it provide any feedback whatsoever on its failure.
Using the Firefox v3.5.9 browser the RVS4000 v1.3.2.0 firmware update worked straight away without a glitch.
So, perhaps a general "Heads Up" to everyone - if you have any issues when trying to configure your Router, then try using another browser as the first step.
Many thanks again, Rene.
Message was edited by: Robert Gough
Oh, another issue that might help folks:
When the firmware update file "filename.img" is downloaded from the Cisco site Windows interprets it as a .zip file and associates the usual ZIP file icon to it. Cisco's documentation states "unpack the file and ......". This immediately leads one to believe that the firmware update file is contained in the ZIP file. This is not the case! It is NOT a ZIP file at all, but is the binary that the router requires.
If one tries to unzip the file WinZip throws up an error "ISO file incomplete" and doesn't unzip it.
So, ignore the ZIP file icon and just point the router firmware updater at the .img file, despite its ZIP icon.

I got this message when I just finished my online ordering. "We're Sorry. Something went wrong with your request. Please try again later." and I didn't get confirmation email yet but I've been charged from my credit card already. Any suggestion please?

I got this message when I just finished my online ordering. "We're Sorry. Something went wrong with your request. Please try again later." and I didn't get confirmation email yet but I've been charged from my credit card already. Any suggestion please?

I am having the same issue. When I try to update my payment information I receive an error that states, "We're sorry, something seems to be wrong on our end. Please try again later.
After Adobe's servers were breached I received a phonecall from my bank, stating that someone had used my credit card at a hotel in Mexico (I live in Ohio). I closed that credit card and was issued a new card. I want to update my card information on my Creative Cloud subscription. I chatted via the web with a customer service rep today. He was anable to help me. He suggested I call the Care Center. The hold was estimated at 2 hours. All I want to do is update my card information so the next time Adobe automatically bills for my subscription the transaction doesn't bounce.

"Something went wrong with your request. Please try again later."?

I ordered a Retina MacBook Pro on the 24th. Today, I went to check the status of the order and it redirected me to https://secure1.store.apple.com/ie/order/sorry saying:
Something went wrong with your request. Please try again later.
The only place I can get to is the account homepage. Anyone have any idea whats wrong?
Cheers.

Hi Fionnr,
If you are in USA then you can call them their toll free number 1-800-275-2273 or otherwise if you have an Apple ID then you can raise a request on https://expresslane.apple.com/GetproductgroupList.action
They will help you further.

Something is wrong with your Unlocator setup.

when i go into " CBC.CA an error comes up saying "something is wrong with your unlocator setup " i dont what to do or how to fix it

Where are you located?
Why type of network are y oconnected to?
Home?
Business setting?
Free wifi?
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

We're Sorry. Something went wrong with your request. Please try again later.

We're Sorry
Something went wrong with your request. Please try again later.
I meet the problem above when i click the button 'Check Older Status'? Who can help me?

We have the same problem here in Australia too. I haven't been able to cancel my iPhone 4s I ordered online. I was able to purchase one from a retail store the last thing I need is two iPhone 4s :P

E5: Ovi Suite has lost connection with your device...

I am trying to update the software on my E5 using OVI suite but I keep getting an error during the install phase (after backup). The following error and instructions are displayed in the OVI suite window but makes no difference when I follow these instructions (just end up back with the same error).
"Nokia Ovi Suite has lost connection with your device. Follow these steps to help reconnect your device:
1. Remove USB cable from your device.
2. Restart the device (turn off and on again).
3. Re-insert the USB cable.
4. Click 'Ok' below to continue updating."
Current E5 software version is 042.007.
I am trying to update to E5 software v. 043.115
Any ideas?

Yep having the same issue. Just got a replacement handset due to the random restarting issue, soon after setting up the new handset I get a message on phone saying software update is available. Both OVI suite and Nokia software updater say version 43.115 is available (about 200mb in size), I currently have the same version as you 42.007. It claims to do a lot of improvements to the handset. The update downloads fine but when it comes to installing I keep getting the same issue. Phone simply will not restart automatically and the update restarts then fails at the same point over and over. Had the same problem with my previous handset.
I spoke with my network provider to see if it was an issue with the handset needing firmware specific to them but they said no it is an issue with the firmware itself and has been happening to everyone since its release!!! They said I should not download it until Nokia has resolved the issues with it. But how do I know when that will happen as I cannot find anything put out by Nokia stating there is an issue or anywhere on web forums saying there is actually a problem.

Reload Software:552 and then "Application loader was unable to connect with your device."

Hi guys
I'm new to this forum and looking for a help please..
My curve 8900 got the "Reload Software:552" message on the screen. I was trying to uninstall an application and after it asked me to reboot, it showed me that message. I already try to reinstall the OS like most of you guys said. But when I already in the process of that, it showed me "Application loader was unable to connect with your device. Please re-connect yout device, enter password, if requiered, and retry"
I was trying this steps..
1. use the BlackBerry Desktop Manager
2. connect the BlackBerry to the computer using a USB cable
3. click application loader, then start
4. then i choose the OS and apps i want to install it also
5. after i click finish and the process start, i stuck on the task 2 of 5 "wait for device initialization" and then the message "Application loader was unable to connect with your device. Please re-connect yout device, enter password, if requiered, and retry" showed.
I try and try again but there is no use. it keeps show that message.
help me please, this really frustrates me
Thanks in advance guys..

1. Make certain your USB cable is connected to a main REAR USB port on the rear of the PC, not a front USB port, not a USB hub.
2. Try loading the OS with these instructions (make sure that Desktop Manager is not running):
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

There is a problem with your device

Hello everyone!
My brother just offered me his Ipad that he bought in the US but now im back to France and when I try to reactivate it with my computer there is a message in itunes which says " there is aproblem with your device" what should I do? wont be easy to go back to the US to fix it!!! there is a problem with the server or something? aaaaahhhh!!! what can I do??? (sorrry my English is not perfect!)

Hi there,
I reccomend calling Apple Care in France, as they should be able to assist you with this issue. Contact details are quoted below.
Téléphone
Les clients Mac, iPhone, iPod et iPad depuis moins de 90 jours bénéficient de l’assistance téléphonique gratuite, qui couvre un incident par iPod et un nombre illimité d’incidents par Mac et iPad.
Assistance technique iPhone, iPod, Mac et iPad : (France métropolitaine) 0805 540 003
Assistance technique iPod, Mac et iPad : (DOM-TOM) 0825 770 035
Regards,
Nathan

"There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. "

My problem is after i did a restore on my 32gb ipod touch i now get a error on itunes that says "There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. " Please help

In the ipad discussion forums there apparently is a HUGE problem with people not being able to update to ios 4.3.3, it apparently locks up their devices and they are also getting the error "there is a problem with your device".... some are reporting the same problem with their ipod touch as well... it looks like it's a global issue
The forum is in the ipad section under the title of "There is a problem with your device".
I have dodged a bullet on this one since i have not updated my ipod's or ipad in the last couple of days.... i will hold off syncing to itunes until this issue is fixed... good luck, and spread the word if you can to get apple to listen

The Installation associated with your device is invalid.

The Installation associated with your device is invalid when I try to open the magickjack app
Something is go in on on my iPhone 5.
Everything was ok before on my iPhone 4S

The Installation associated with your device is invalid when I try to open the magickjack app
Something is go in on on my iPhone 5.
Everything was ok before on my iPhone 4S

This application is not compatible with your device and cannot be loaded

Hi,
I have been trying to load an application to my BB 9000 since a monday and getting this error "This application is not compatible with your device and cannot be loaded".
As evident, I am new to BlackBerry development and got to port an existing J2ME project on BB 9000.
To load application I am using
- BB Dektop software 5 (latest)
- BB Device Software 4.6 is installed (which is the version of BB 9000 as well)
I am able to load sample JDE 4.6 applications but I build my project through same JDE and through eclipse (JDE compoment 4.6.0.19) as well but couldn't load it,
I even signed my app since I am using net.rim.device.api.servicebook api which requries signing.
Can someone please explain me
1) why this error occurs in first place
2) how to setup right envioroment to load an application on a given BB handset (BB 9000 vodafon India to be specific)
3) How would manage this process on a single machine if I have 4-5 different BB handsets.
I shall be thanful for any logical pointer to solution to these problems.

Hi,
The main problem with your genrated ALX file. I think in your ALX file contains <fileset Java="1.49" _blackberryVersion="[5.0.0)"> TAG and remove the _blackberryVersion attribute. Then it will work.
So your final ALX file contains
<loader version="1.0">
   <application id="App">
       <name >
           App1
       </name>
       <description >
       </description>
       <version >
           1.0.0
       </version>
       <vendor >
            Vim
       </vendor>
       <copyright >
           Copyright (c) 2010
       </copyright>
       <fileset Java="1.49">
           <directory >
               5.0.0
           </directory>
           <files >
               App.cod
           </files>
       </fileset>
   </application>
</loader>
Even thought it is not installed then make sure that your application may not delete from your device. Select the application and click on delete button in Desktop manager.
Still u didnt slove the problem then insted of
<directory >
               5.0.0
    </directory>
replace as
<directory >
</directory>
Regards:
Jitendra.B
Vimukti technologies Pvt Ltd
Project Manager

Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks!

Your Account is no longer synchronized with your device. Check that your account settings are correct. If they are correct, contact your email service provider.

Hey everyone,
I have a Blackberry Q10 with T-Mobile and have had the following error message appear over the weekend:
Your Account is no longer synchronized with your device. Check that your account settings are correct. If they are correct, contact your email service provider.
My Blackberry is trying to connect to Office 365 for its e-mail. I tried to remove the account, then re-add it, but the e-mails seem to not come in as quickly as it should. I have also tried the Delete Prior and Mark Prior message options, but still no luck.
Does anyone have a solution for this issue? Does it have to do more with Office 365 or the BES server?
Many thanks in advance.

Have had issues with z10 but try the following: -turn wifi off when activating Active Sync -do not use a double quote character in your password email account -try using Outlook account option in drop down list of email account types in your z10. Works great. Hope one these helps. BlackZ10

Laserjet 200 firmware update - "Something is bad with your device"

Similar Messages

Maybe you are looking for