Laserjet 200 mfp scan to email

I have recently begun having a problem with my scan to email feature. I have been using it frequently, but today when I tried to send a scan I recieved the error message: "The SMTP server uses an authentication method that is not supported. Try a different server."
I am using my gmail account, that has worked ever since I bought the printer (using the standard gmail settings: smtp.gmail.com, port 465...) and as far as I can tell nothing has changed that would explain the error.
I have tried deleting and re-creating my email profile on the printer via the web interface but I still get the same error when I test the account.
Does anyone else have this issue? Is there a setting I am missing that needs to change to make this work again? Has Google changed something about their authentication that no longer allows the printer through?
Thanks!

Hi,
You shouldn't reconfigure the email settings, the problem relies on your Gmail account security settings which configured with secutiry options which are not supported by the printer, that may happen due to two-factor authentication or if you set Google to only allow access for more secure apps.
First open the following link and ensure you are logged on to the same account as you are setting for the printer.
https://myaccount.google.com/
Within the Signing in section ensure that "2-Step Verification" is set as "Off", as well ensure that "Access for less secure apps" is set as "Allowed", otherwise the verification will fail.
Within the Recent activity section click on "Devices", if you see any blocked connection attempt (it will be highlighted in red) click on Yes and follow the steps by allowing access for less secure apps...
Once you are done run a test for the outgoing user profile and check if the problem been resolved.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Laserjet 500 MFP Scan to email stopped working

    Hi,
    We have three LJ500 M575's, which we have been using for around 10 months with no issues.
    All three devices use the same Exchange User.
    This week we started to get SMTP Protocol Errors when sending scan to email, I have checked the Log and the error is 44.10.01 SMTP Protocol Error.
    I ran through the setup wizard and left the details the same, at the end I sent a test email, and this is fine, I have sent these internal and external to the company, and each time the test email is delivered.
    When I then go back to scan I get the same 44.10.01 error. I have changed the username and ran the same test, with the same results, I am able to send the setup test email, but when I go to scan I get the same 44.10.01 This is the same across all three devices.
    I have flashed one of the devices with Firmware 2304061_439478, but this has had no effect.
    I cannot see any errors on the Exchange side.
    Any ideas anyone?

    @ITD 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • HP laserjet 400 mfp and Laserjet 200 mfp

    I have 2 printers HP Laserjet 200 mfp and HP Laserjet 400 MFP. I tried HP phone support. I checked each printer on 2 diffent networks to make sure it was not my setup. When I try and setup both printers with Web Services they both say unable to connect to the internet. I did a firmware update on both printers no help. HP told me that I needed to have a DMZ setup ie. port forwarding I don't think this is right.
    Thanks
    O.D. Smith (HP Retired)

    Hi Smith,
    Welcome to Consumer Support Forum.
    As per the request you have 2 printer and u want to connect through n.w
    In 400 mfp printer, please connect the n/w cabel(Physical Cabel)
    and print a configration report, you will get the ip address of the printer.
    I want you to check the ip of the printer and the ip of the computer are in same range or not, if its in same range
    please try to ping the ip through command prompt winodw
    Once reply from the printer is confirmed printer can be installed easily.
    Please reply if the issue persist.
    Regards
    HP

  • HP 375 MFP scanning to email not possible any more

    HI, there:
    I have owned the MFP for over 4 months. Just after it was installed, I set up the scanning to email function, and it has been working well so far- until now. Actually nothing was changed- but suddenly the port 25, or other ports do not allow me to scan from hotmail accounts. I am not sure if it is hotmail, or not, since my outlook emails are still coming. Even after I tried with other ports- still setup of scanning to email with HP program could not go thru. Can anybody help? I really don't want to bring a USB stick every time using the function.
    Thanks
    Rob

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet M1319f MFP scaner not scan continues pages.

    Hi. I am using HP Laserjet M1319f MFP ALl in one printer & scanner software. Previously installed in windows 7, scanner function works, it will scan multiple docs in one pdf or one file. But now i have windows 8.1 installed. I have install the Printer / Scaneer software & firmware as suggested by HP site download. Print and scan working ok, but unable to scan the document in one file, it will not ask as previously do you want to scan another page or not? so is there any settings / software  available that i can do the continuos scan in one file. Thanks,Bhautik Shah

    Hi,While a Full Feature software was available for Windows 7, a such no longer provided for Windows 8. A basic set of drivers as offered only provide basic scan capabilities using the OS utilities, a such does not offer an HP Scan Utility and allow scanning a single file only. Try the 3rd party NAPS scan utility below, it offers PDF and multiple page scanning and offered as a freeware:http://sourceforge.net/projects/naps2/files/latest/download Within that app you may scan multiple pages prior saving the PDF. Hope that helps,Shlomi

  • HP Laserjet 1536dnf MFP scanning issue Windows 8.

    Printer: HP Laserjet 1536dnf MFP
    OS: Windows 8
    How printer is hooked up: Ethernet cord into router
    I recently upgraded to Windows 8, and my printer is connected via ethernet cord into the router and it was previously working just fine. Now when i go to click on the "HP LJ M1530 Scan" program it gives me the error "The HP LJ M1530 MFP Series Scan was not found.". I can print just fine etc, just cant scan. Any help will be appricated.
    Thanks in advance.
    This question was solved.
    View Solution.

    Hi,
    Did you uninstalled the software and installed the Windows 8 software after upgrading the OS?
    If not, go to Programs and Features and uninstall the current HP software.
    Then download and install the latest software below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=Im-86005-3&cc=us&dlc=en&lc=en&​...
    Hope that helps,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I have an HP Laserjet M1319f MFP scanning problem

    I have an HP Laserjet M1319f MFPand ever since I moved from Windows XP to window7 it won't give me the option to scan to PDF

    Hi @DWD2444594 , I see by your post that you are no longer able to scan as a PDF after updating to Windows 7.
    I can help you.
    I checked the drivers online for Windows 7.
    They are HP LaserJet Hostbased Print/Scan Plug and Play Drivers. No additional software.
    The Plug and Play Bundle provides EZInstall to assist with installation for direct USB connections and offers basic print and scan for all-in-one and multifunction devices.
    The Windows scanning software doesn't have the feature for PDF scans.
    You would have to use a Third Party Software for scanning by PDF.
    I would just go to www.google.com and search for free scanning software for PDF in Windows 7.
    There should be a lot of different ones available.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Color Laserjet CM2320nf MFP- Is this email legitimate or is it a scam?

    Just received this email yesterday and wanted to know if it is acutally legitimate or is it a phishing attempt to install malware on our printer?
    URGENT SUPPORT NOTIFICATION FROM HP - PLEASE READ HP LASERJET FIRMWARE UPDATE IS AVAILABLE
    Dear Valued HP LaserJet Customer,
    HP recently announced the potential for a certain type of unauthorized access to some HP LaserJet printers. The potential for this unauthorized access exists for LaserJet devices on a public Internet without a firewall, or for LaserJet devices in a private network, if a malicious effort is made by a party on the private network to modify the firmware of the device.
    While no customer has reported to HP unauthorized access, HP has built a firmware update to mitigate this issue. To obtain the latest firmware for your product, access bulletin HPSBPI02728
    SSRT100692 - Certain HP Printers and HP Digital Senders, Remote Firmware Update Enabled by Default at this link:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03102449
    Then:
    1. Find your product in the table
    2. If an update is available, you may click on the embedded link.
    It will take you directly to the web page where the Firmware update is available.
    Update your product's firmware using the instructions contained in the readme file for the firmware image. If you are an HP Managed Print Service customer, please contact your managed print services provider, who can install the firmware upgrade for you.
    Because the security of our customers is of utmost importance to HP, we reiterate our recommendation to follow best practices for securing devices. This includes placing printers behind a firewall and, where possible, disabling remote firmware upload capabilities on exposed printers.
    Additional information is available at http://www.hp.com/go/secureprinting
    HP deeply appreciates your business and your partnership.
    If you have any questions, please do not hesitate to contact your sales representative.
    This Urgent Support Notification was sent to (I removed my email address)
    because you registered with HP or Compaq as a product owner and
    this message is critical to your product ownership.  HP prides
    itself in being customer focused, quality driven and a company
    that customers can trust and count on, and we apologize for any
    inconvenience.
    HP is committed to respecting your privacy.  For more
    information, visit our privacy policy at
    http://www.hp.com/country/us/en/privacy.html
    or contact us at
    HP Privacy Mailbox, 11445 Compaq Center Drive W., MS 040307,
    Houston, TX 77070.
    No virus found in this message.
    Checked by AVG - www.avg.com
    Version: 2012.0.1913 / Virus Database: 2114/4837 - Release Date: 02/28/12
    This question was solved.
    View Solution.

    Hello,
    The email is legitimate and came from HP indeed.
    It is highly recommended to install the latest firmware, which you may find below:
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3597358&lang=en&cc=us...
    Select your OS version, then follow the latest Firmware and follow the installation instructions.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Laserjet M1212nf MFP scan to a network folder

    I want to use this printer on network for scanning only. How can i configure this printer as Scan to a network folder. for ex i just put the document in the ADF and press scan, so document should be save on specific network folder but HOW. please advise.

    Hi,
    In your printer software, open 'Scan a Document or Photo' tab, under this click, 'Advanced Setting', use 'Save location', Please refer to the following image for details,
    I work for HP. I am speaking for myself and not for HP.
    Say thanks by clicking the Kudos Thumbs Up in the post.
    If my post resolved your problem, please mark it as an Accepted Solution

  • Fax issue with HP LaserJet 200 MFP M276

    Hello,
    I can't receive fax when my printergo to sleep mode. the line is ringing but the fax is not responding.
    Will appreciate your promot responce.
    Regards,

    Hi,
    Install the laetst firmware below, that should resolve a such:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108130-7&cc=us&dlc=en&lc=en...
    Fixes:
    Addresses an issue where the device may not wake up from sleep mode when receiving a fax if it is connected to an improperly grounded 220v power source.
    Be aware that you may instlal the firmware with the printer connected via USB or with a network cable.
    If the printer is wirelessly connected to yoru router DO NOT update the firmware before connecting an ethernet cable to your router or a USB to your PC (depands on yoru printer model).
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Printer HP Laserjet 200 MFP M276 is not printing in color

    I am trying to get my printer to print in color, however I only get blue output, not in the least the colors it should print.
    Any ideas what might be the cause?
    FYI: I am using original HP toner
    Thanks
    Yvonne
    This question was solved.
    View Solution.

    Welcome to the HP Forums YHendrikx,
    I see by your post that you are only getting blue output.
    I can help you with this issue.
    Inspect the toner cartridge for damage:
    1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
    2. Check the memory chip for damage.
    3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
    CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
    Fingerprints on the imaging drum can cause print-quality problems.
    4. If you see any scratches, fingerprints, toner or other damage on the imaging drum, replace the toner.
    5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
    I have provided a document to go through the steps to see if it will help resolve this issue.
    Troubleshooting Print Quality Issues.
    Please provide in detail the results if you are still having issues.
    What were the results of the supplies status page and the print quality page?
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet 200 MFP M275NW

    Hi,
         The touch screen on my printer doesn't turn on anymore.  I need to change the cartidge.
    How do I rotate the print-cartidge carousel without the screen?
    Thanks
    Andy

    Hi @AndyTran ,
    I see that you are having issues rotating the carousel to change the toners, because the display isn't working. I would be happy to help you.
    You can manually move the carousel backwards. On the left hand side, approximately where the red circle is showing on the picture, there is a whole with a white plastic piece inside, use a pen or something to push the white plastic piece and manually push back on the carousel to turn it. Don't touch the drum on the toners though, it can damage them.
    For the issue with the display no longer working.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the printer is still in warranty and you are having issues with the carousel or the touch screen, please call our technical support at 800-474-6836 and inquire about a replacement printer. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP PRO 200 MFP 276NW WIRELESS PRINT DIRECT PROBLEM

    I JUST BOUGHT AN HP LASERJET PRO 200 MFP 276NW COLOUR PRINTER AND I DISCOVERED THAT I CANT PRINT DIRECTLY FROM MY LAPTOP. MY LAPTOP HAS A WIRELESS FUNCTION . HOWEVER I WAS ABLE TO PRINT FROM MY SONY XPERIA ZR PHONE. I HAVE TRIED TO REINSTALL IT ON MY LAPTOP SEVERAL TIMES BUT WITHOUT SUCCESS. IT ALWAYS SHOW ISSUE SYMBOL ON TNE COMPUTER WIRELESS CONNECTION PANE.
    SECONDLY, THE PRINTER USUALLY MAKE NOISE WHEN PRINTING. IS THIS NORMAL?
    FINALLY. IS THERE ANY HP DESIGNATED SOFTWARE FOR PHONES TO CONNECT WIRELESSLY TO HP RINTERS TO PERFORM NORMAL PRINTING JOBS?
    I ACTUALLY BOUGHT THIS PRINTER BECAUSE OF THE WIRELESS FUNCTION. AM USING WINDOW 7 OS.
    I NEED HELP URGENTLY
    THANKS
    This question was solved.
    View Solution.

    Hello @OLAAT ,
    Welcome to the HP Support Forums!
    I understand you are having some issues printing over the wireless network to your LaserJet 200 MFP M276. It seems to me, since the printer will print from your Sony Xperia ZR, and the error icon is on the computer, you need to look into computer support for that question.
    I was able to find a document that may help with the wireless connection issues on the computer. Troubleshooting Your Wireless Network and Internet Connection (Windows 7)<---
    If the above doesn't help, I would suggest posting the inquiry in the laptop Forum's.
    Regarding printing from phones and what software is needed, it is dependant of the phone. Some phones, like Apple, have AirPrint pre-installed. You would be able to install and try the HP ePrint App on your phone, if available in its App store.
    This guide: Getting Started with HP ePrint Mobile Apps, will explain more about the App.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Laserjet pro 200 color mfp m276nw Scan to Email issue

    My laserjet pro 200 color mfp m276nw claims email is not set-up.  I have entered in the e-mail addresses to send the scans to, but it still claims it is not setup.  How do I setup this feature? I already have the "Send an Email" feature working where it sends the scan "from" my e-mail, but I want to use the Address Book feature and just send to a specific e-mail. 

    HI @Username57 ,
    I see by your post that you what to setup the scan to email on the printer. I would like to help you out with this issue today.
    I have provided a document for How to Scan: From the Control Panel. Select Scan to an email.
    If you are still having issues then go into the printer's Embedded Web Server by typing in the printer's IP address in your web browser and setup a Static IP and set the DNS address.
    Click the Network tab, then click on IP4 config on the left side.
    Click on Network Address (IP)
    Select Manual.
    Type in the printer's information and IP address.
    Set the DNS Address Configuration as Manual. Under Network Information, it looks like you can change the settings there.
    Set the preferred address as 8.8.8.8
    Set the Alternate address as 8.8.4.4 and confirm the changes.
    Try setting it up again.
    If you need further assistance, just let me know.
    Happy New Years!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Un able to install Scan to Email app on Color LaserJet Pro MFP M177fw

    Hello!
    I recently purchased  Color LaserJet Pro MFP M177fw as my home printer.
    Main thing i was looking for was Scan to Email feature.
    As I read in specifications provided in this product description I see:
    http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
    Digital sending standard features: Scan to E-mail by HP SW; scan to application by HP SW ; scan to file by HP SW
    Once I try to install Scan to Email app i get following message once i try to install app:
    What is wrong, that i cannot install app that was one of main choice points of this printer.
    TWAIN and using computer scanning process is clear, so no need instructions how to scan using computer.
    I especially need fucntion that i scan document on printer, then enter email and its emailed.
    Thank You in advance for clarification,
    Martins

    Hi MrJansons,
    There are a numerous ways to scan and email from your printer. Please go through the below links.
    Make sure you have installed the software driver for your printer on your machine and then follow any of the methods to scan and email.
    http://support.hp.com/us-en/document/c03476857
    Kind Regards,
    Oliver
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

Maybe you are looking for