Laserjet 2035n stuck in manual IP mode
LaserJet printer is stuck in manual IP mode. I have done factory reset on it multiple time and still won't turn back on to automatic. Need some help please. Thanks.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP
Similar Messages
-
T 43 Stuck in '10 Key' Mode. Need Manual
Please help. My other T43 is stuck in 10 Key mode and I cannot find how to turn it to normal. I have many other questions that should be answered in a good manual, but I have not been able to find one. Can someone point me in the right direction, please?
I have two thinkPad T 43 1875 DLs with Pentium M T 1.73MHz 2 GB RAM and 320 B HDD 32 bit Windows 7 Ultimate. I am new to these machines and to Windows 7, but will help when I canUndo the Num Lock mode.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Manual feed mode Colour Laserjet 2840
Hi. Printer appears to have defaulted to Manual paper feed mode & I can't see how to change it in the control panel. Tool Box is flaky under Windows 7 & though I have manual feed turned off there it still appears as "manual" in the control panel & still wants human interaction to print. Googling gets several itterations of "Verify that the device is not in manual feed mode and print the job again." but no directions on how to change it. Printer has 2 paper trays if that is significant.
Hi, I somewhat had the same issue today, except mine was grayed out. I checked the following: Control Panel\Hardware and Sound\Devices and Printers Then I opended the HP Device toolbox where you can toggle the Manual Feed. Hope this helps.
-
As i had said, I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board? Is there a Fn key combo i'm missing or is the issue more serious then i realize? any and all help and hints would be greatly apprichiated, thanks in advance.
-Powerbook UserThe PowerBooks have an F-key that toggles mirrored and extended mode. My PB is loaned out right now but I think it was f7. The keycap has an icon on two overlapping rectangles, as I recall.
EDIT: Yes! Found a pdf of the PB manual it shows F7 is the toggle: -
Hi at the moment my ipod is on manual sync mode. Is there any way of changing this to auto-sync without losing the music on my ipod or library? Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
This is so I can delete music from my ipod knowing its rated on my i-tunes so I can then see later if I want to re-add it based on its rating
ThanksIs there any way of changing this to auto-sync without losing the music on my ipod or library?
Unfortunately there is not.
Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
Not without the help of third party software such as this one:
http://www.copytrans.net/copytrans.php
B-rock -
Downloaded a movie from iTunes to my iPad. 2 minutes into the movie it stopped and My Videos is stuck in black screen mode. So basically rented a movie and never watched it.
The EXACT same thing happened to me last night! Rented a movie; it had barely started and then froze. When I touch the video app icon, all I get is a blank, dimly lit screen. None of the other videos I own will display either. Was your problem ever resolved?
-
How to install a HP LaserJet 2035N on a LAN
Dear Sir,
My office just equip a new HP LaserJet 2035N for using on our LAN but I can not install this printer for some desktops with OP Windows XP service pack 2. When I use Ping command , no feedback althought these desktops can see this printer on Printer and Faxs. Please help me how to install a HP LaserJet 2035N on a LAN.
Thank you very much.
Best regards.
Dang Dang Quangjust use the shiped driver cd to install the network printer.
1. turn your printer power on and plugin network (LAN) wire in printer and wait for few minutes.
2. after few minutes printer will be assigned a ip address automatically.
3. you can get this ip from its test page (press and hold green button on printer panel)
4. type this ip in your internet explorer. this will opened a printer interface in your browser
5. here you can change its ip according to you network setup and and install its driver accordingly. -
Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.
Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.
-
my ipod screen is stuck on x-ray mode and i have no idea how it got that way and i dont know how to change it back.
A) This is the iPhone forum.
B) Even if it was the iPod forum, your post makes absolutely no sense. -
My Phone is stuck in the zoom mode on every page
My phine is stuck in thezoom mode in every page from home tocontacts to un locking it. I can't gt itback to normal. I've tried powering it down to rebooting it. Can some onehelp.
I have the same problem as this person. My phone in stuck on the zoom mode. I can't get it unlocked so i can tap in twice with 3 fingers as you had described on your post. Kindly help me with this. Thank you in advance.
-
My printer hp photosmart c4680 is stuck in the scanning mode how do i get it out to print again need
My printer hp photosmart C4680 is stuck in the scanning mode how do I get in back to the printing again I need help please
i have this problem too! have you fixed yours yet?
-
My phone (5C) is stuck in the restore mode which is preventing a backup which is preventing installation of IOS 8.1. Need help.
Hi Petesmith643,
Welcome to the Apple Support Communities!
It sounds like your device is in recovery mode. I understand you would like to back it up before updating to iOS 8.1 but cannot because you are in recovery mode. I would first suggest restarting your device to exit recovery mode.
If you can't update or restore your iPhone, iPad, or iPod touch
If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
Cheers,
Joe -
Z3 Compact scenes not working in manual camera mode
Hi. That's my problem: when I use manual camera, the scn button is grey and not working, so the HDR. They worked when I bought the phone, at Christmas... No mod root etc. Please help me!
Solved!
Go to Solution.http://support.sonymobile.com/global-en/xperiaz3compact/userguide/Using-still-camera-settings/
It has to be set on Manual mode at 8mp
HDR
Use the HDR (High Dynamic Range) setting to take a photo against strong back light or in conditions where the contrast is sharp. HDR compensates for the loss of detail and produces a picture that is representative of both dark and bright areas.
This setting is only available in Manual capturing mode.
ISO
You can reduce image blurring caused by dark conditions or moving subjects by increasing the ISO sensitivity.
Auto
Sets the ISO sensitivity automatically.
50
Sets the ISO sensitivity to 50.
100
Sets the ISO sensitivity to 100.
200
Sets the ISO sensitivity to 200.
400
Sets the ISO sensitivity to 400.
800
Sets the ISO sensitivity to 800.
1600
Sets the ISO sensitivity to 1600.
3200
Sets the ISO sensitivity to 3200.
This setting is only available in Manual capturing mode.
Metering
This function automatically determines a well-balanced exposure by measuring the amount of light striking the image you want to capture.
Centre
Measures the centre of the image, and determines the exposure based on the brightness of the subject there.
Spot
Adjusts the exposure in a very small part of the image that you want to capture.
Face
Measures the amount of light on the face, and adjusts the exposure so that the face is neither too dark or too bright.
Multi
Divides the image into multiple regions, and measures each region to determine a well-balanced exposure.
This setting is only available in Manual capturing mode.
Image stabiliser
When taking a photo, it can be difficult to hold the device steady. The stabiliser helps you by compensating for small movements of the hand.
This setting is only available in Manual capturing mode.
Preview
You can choose to preview photos or videos just after you shoot them.
Unlimited
The preview of the photo or video appears after you shoot it.
5 seconds
The preview of the photo or video apears for 5 seconds after you shoot it.
3 seconds
The preview of the photo or video appears for 3 seconds after you shoot it.
Edit
The photo or video opens for editing after you shoot it.
Off
The photo or video is saved after you shoot it, and no preview appears.
Face registrationYou can register faces with the Camera application so that the viewfinder automatically focuses on these faces when they appear in the viewfinder.
Flash
Use the flash to take photos when lighting conditions are poor or when there is a backlight. The following options are available when you tap the flash icon in the camera screen:
Auto
The camera automatically determines if the lighting conditions require the use of a flash.
Fill flash
Use this setting when the background is brighter than the subject. This removes unwanted dark shadows.
Red-eye reduction
Reduces the red colour of eyes when taking a photo.
Off
The flash is turned off. Sometimes photo quality can be better without the flash, even if lighting conditions are poor. Taking a good photo without using the flash requires a steady hand. Use the self-timer to avoid blurred photos.
Torch
A torch or camera light is turned on when you take photos.
Scene selection
Use the Scene selection feature to quickly set up the camera for common situations using pre-programmed scenes. The camera determines a number of settings for you to fit the selected scene, ensuring the best possible photo.
Off
The Scene selection feature is off and you can take photos manually.
Soft Skin
Take photos of faces using an enhanced beauty effect.
Soft snap
Use for shooting photos against a soft background.
Anti motion blur
Use for minimising camera shake when shooting a slightly dark scene.
Landscape
Use for landscape photos. The camera focuses on distant objects.
Backlight correction HDR
Use to improve details in high contrast shots. The built-in backlight correction analyses the image and automatically adjusts it to give you a perfectly lit shot.
Night portrait
Use for portrait photos taken at night or in poorly lit environments. Due to long exposure time, the camera must be held still or placed on a stable surface.
Night scene
Use when taking photos at night or in poorly lit environments. Due to long exposure time, the camera must be held still or placed on a stable surface.
Hand-held twilight
Use for taking hand-held low-light photos with reduced noise and blur.
High sensitivity
Use for taking photos without a flash under low light conditions. Reduces blur.
Gourmet
Use for shooting food arrangements in bright colour.
Pet
Use for taking photos of your pet. Reduces blur and red eyes.
Beach
Use for taking photos of seaside or lakeside scenes.
Snow
Use in bright environments to avoid overexposed photos.
Party
Use for indoor photos in poorly lit environments. This scene picks up indoor background lighting or candlelight. Due to long exposure time, the camera must be held still or placed on a stable surface.
Sports
Use for photos of fast-moving objects. Short exposure time minimises motion blurring.
Document
Use for photos of text or drawings. Gives the photo increased, sharper contrast.
Fireworks
Use for taking photos of fireworks in all their splendour.
This setting is only available in Manual capturing mode.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Apps are stuck in an "installing" mode
I have several apps stuck in the "installing mode" after a recent attempted update. It is very strange because these apps are
not visible on my homescreen - so I cannot delete and reinstall. I can only see them in the purchased apps category within the APP STORE. They
function button/box is greyed and has the letters INST visible. Almost like you would see while an app is installing - this has been the case for over
three weeks. Does anyone know how to abort this function or somehow refresh so that the installation update is completed. The main app i care
about is the Amazon Instant Video App. Others include Nintendo Gamer and Pop Sugar.... not sure if there is any kind of connection....You can try any or all of these suggestions. They have worked for other users in the past, but YMMV. Just ignore anything that you have already tried unsuccessfully.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
Images get stuck in full screen mode
In Lightroom, images get stuck in full screen mode, i.e. won't go back to develop or grid mode. Please help!!
In Lightroom, images get stuck in full screen mode, i.e. won't go back to develop or grid mode. Please help!!
Maybe you are looking for
-
I have a basic vertical table with two columns - a date dimension and a measure. I have a drill filter on the date column. I want my vertical table to ignore the drill filter. I came across the nofilter function on the help topics but am not able
-
Linking AR invoices and Payments
Does anybody know how are invoices(OINV) and payments (ORCT) linked? I mean, which table stores the information to relate them. Thanks all
-
Grid control alerts with ORA error code
Hi, Is there any way to include the actual ora error in the email alerts that come out of grid control? regards Alan okey dokey, thats done. Edited by: alanm on Jul 13, 2009 10:31 AM
-
Does anyoine know when the x130 will be available in uk?. There is no information on the lenovo uk webpage. I like the strong design (over the x123) and this could be the perfect laptop for rough conditions on the road. frank
-
I have galaxy dos new one and when I have call the mic didn't work . But the mic work in others programmes Note the skyp is the last apdat