Laserjet 2200d used to work fine; now red light on and can't find problem

I have a Laserjet 2200d. It worked fine for years. Suddenly, one day it just stopped working. The red emergency light is on. I can't find any problem. I've tried the usual, like paper jam and shaking cartridge. I recently found a user forum that suggested taking the whole machine apart and adding a drop of oil to the motor shaft in the circuit board of the laser scanner assembly. I even tried that. Didn't make a difference. Anything else I should try before tossing the printer? An old cartridge shouldn't make printer stop, should it? I don't want to buy a new cartridge or spend money on this printer unless I know I can get printer to work.

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

Similar Messages

Itunes wont start in Windows7 Professional 64-bit, it used to work fine now it won't start!

OK, So my itunes use to work fine until yesterday when I went to open it. It wont start and I tried many different things. Unistalled, re-installed, removed everything apple related (one of the apple support articles told me to try that) and that didn't work either. I know this question may have been posted earlier but I can't find anything for this specific issue (win7 pro, 64bit).
Anyhelp would be greatly appreciated.

Before you go knocking a much better OS than you'd wish to believe, I'm having the SAME problem in XP.
And now, instead of showing up as one Multimedia Audio Controller...
It shows up as like... 20-30 of themMessage Edited by ouT-Phaze on 03-03-200809:02 PM

Audigy 2 Platinum used to work fine, now it doesn'

Hi,
I've been using my audigy 2 Platinum to record myself playing guitar for the past 2 years. I have my guitar amp hooked up (via send input on the back of the amp) to the Line In 2 (MIC IN 2) input. Lots of the time ill be up late recording stuff, so i turn my master volume down on the amp (so it doesn't come out of the amp) and just have it come out of my pc speakers. This time, the sound thats comming out of the speakers is just ugly noise. When i'm not playing anything it just hums. When i play something it just sounds like crap. I thought at first it might just be the speakers, so i recorded something and listend to it on different speakers, sounded exactly the same. So next thing i tried was a different guitar amp. Same thing. So i then opened up my tower to see if anything looked strange, everything looks fine. Next i uninstalled and reinstalled the drivers thinking that might help, sure enough, no help. I came here and read the FAQs and tried anything that sounded like it might help. Still havn't the same problem. I am completly baffled now. Is it possible i could have damaged it the last time i used it's If anyone has any ideas for me please let me know. I am running WinXP service pack 2. Thanks
Edit. I have also tried different cables.Message Edited by zedfour on 09-20-2005 02:24 AMMessage Edited by zedfour on 09-20-2005 07:25 PM

Hi Louie,
Thanks for confirming that is the correct directory. I agree cloning directories isn't the proper solution and would like to help identify what actually went wrong. Perhaps a mapping was removed from CF Admin. It's intriguing that expandPath('/secure') resolves to the proper directory but <cfobject name="getreqstatus" component="secure.common.getreqstatus"> throws an error that it can't find the getreqstatus.cfc that's located in secure's "common" subdirectory.
Just to be clear, is C:\ColdFusion10\cfusion\bin\xxxx-Dev the website's root directory? And is there also an Application.cfc file at C:\ColdFusion10\cfusion\bin\xxxx-Dev\Application.cfc as well as the one at at C:\ColdFusion10\cfusion\bin\xxxx-Dev\secure\Application.cfc?
Could you create a file named bar.cfm w/ this code?
<cfscript>
writeOutput(expandPath("/secure"));//should return "C:\ColdFusion10\cfusion\bin\xxxx-Dev\secure"
writeOutput("<br>" & expandPath("/secure/common"));//should return "C:\ColdFusion10\cfusion\bin\xxxx-Dev\secure\common"
writeOutput("<br>" & expandPath("/secure/common/getreqstatus.cfc"));//should return "C:\ColdFusion10\cfusion\bin\xxxx-Dev\secure\common\getreqstatus.cfc"
writeOutput("<br>" & fileExists(expandPath("/secure/common/getreqstatus.cfc")));//should return "YES"
writeDump(var=new secure.common.getreqstatus(), format="text");//should return "[cfc1] component secure.common.getreqstatus"
</cfscript>
Then could you place a copy of that file at C:\ColdFusion10\cfusion\bin\xxxx-Dev\bar.cfm and C:\ColdFusion10\cfusion\bin\xxxx-Dev\secure\bar.cfm, and then run both (so basically, www.yourdomain.com/bar.cfm and www.yourdomain.com/secure/bar.cfm) and see what is displayed?
Edit: Please rename or remove the cloned directories (i.e. the /secure/common within the calling routine's directory) before running the above.
Thanks!,
-Aaron

I have the latest version of Thunderbird, my hyperlinks used to work fine now they don't work anymore I can send and receive email

I am running version 24.4.0 I can send and receive email but when I get an email that has a hyperlink that I click on and go to. But we don't go anywhere, I tried running in the safe mode that that help, tried rebooting that didn't help. I have an earlier version on my laptop that works fine.

https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working

TS1741 I am having difficulty connecting my Remote App on iPad to iTunes. It used to work fine, but with latest iTunes and latest Remote, I can't get it to work. iTunes should open a 'pop up' window to add 4 digit code, but nothing happens. Any clues plea

Would appreciate in connecting Remote App on iPad to iTunes. It used to work find, before iTunes 11.0 - but now pop up window to input 4 digit code does not appear. Any ideas how to prompt window to open on iMac? Remote App works OK, but says that Home Sharing is not Turned On, although it is. Both devices are logged into my profile account.

You no longer need the 4 digit code in iTunes 11.
iTunes (10.0.1 or later)
Open iTunes on your Mac or PC.
iTunes 11 or newer: Turn on Home Sharing in iTunes by going to File > Home Sharing> Turn on Home Sharing.
iTunes 10.7 or older: Turn on Home Sharing in iTunes by going to Advanced > Turn on Home Sharing.
Connect iPhone, iPad or iPod touch to a Wi-Fi network that is connected to the local network that your Mac or PC is also connected to.
Open the Remote app (software version 2.0 or later) on your mobile device.
Turn on Home Sharing in the Remote Settings screen. Make sure to sign into the same Home Sharing account you used to sign in to from iTunes on your computer.
Once Home sharing is enabled for both your computer and your mobile device, Remote app will be be able to view and control audio and video playback in your iTunes library.
http://support.apple.com/kb/ht1947

9380, updated and now red light flashing and won't turn no!

Hey,
Can anyone help???
Did a software update tonight, now my 9380 won't turn on.
Nothing, not a dodo, apart from the red light blinking twice. Not even showing that it;s charging. Have taken battery out etc, but still nothing!
Arrrrrrrrrrrrrrrrrrrgh!!!
Cheers
Gem

Hi and Welcome to the Community!
(Credit JSanders)
There are two methods of recovery for you to try:
One:
Open Blackberry Desktop Software & Connect your device with PC using USB cable, without inserting battery.
You will get three option Retry, Update Or Cancel, then click on update.
Once it is to the stage of the update "initializing handheld", then insert battery.
If this does not work, and you remain stuck on the backing up the Social Feeds database, go to the second method below.
Secondly:
Start your BlackBerry in Safe mode. Article ID: KB17877 How to start a BlackBerry smartphone in Safe Modehttp://www.blackberry.com/btsc/KB17877
Connect to the BlackBerry Desktop Software and allow your handheld to connect. If you are prompted to upgrade, cancel the upgrade for later.
IF you cannot connect or your Desktop Software does not recognize your device while in Safe Mode, please follow the directions here to force the detect:  Article ID: KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
Go to Device > delete > SELECT DATA > select to delete both the Social Feeds and Smart Card databases, and follow the remaining prompts to complete it.
Now, you can return and click to upgrade the device through the Desktop Manager, or reboot the BlackBerry in normal mode and continue the over the air upgrade.
If these do not work, there may be one even more drastic thing to try...
KB27956 How to recover a BlackBerry smartphone from any state
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Not computer knowledgeable...i have a 'brother' copy machine that used to work fine. now i can't get it to copy anything. Anyone know what the problem may be? Maybe I just need a new printer?

Can anyone HELP???

By "copy", do you mean inserting a document into the printer's feed (or on the scan bed) of the printer and having it then make a copy onto another sheet of paper? If so, then it's highly unlikely to be a Mac-related problem. You probably will need to take this up with Brother tech support.
Regards.

TS3212 I cannot open itunes which use to work fine. I have uninstalled and reinstalled and I am getting the following messages. The program cant start because the MSVCR80.dll is missing from your computer. I also get Itunes was installed incorrectly. Erro

Itunes will not open on my computer. It was working just fine. I get an error message "the program can't start because MSVCR80.ddl is missing from your computer. Try reinstalling to fix program." I have tried this. I then get the error message "Error 7(windows error 126)"
I also get the following message during the download of itunes"Apple mobile device failed to start. verify you have suffcient privileges to start system services.'

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99642)

I reset the admin password, a month ago and it worked fine now it don't and I can't reset it because it 's asking for the old password.t

I wrote the Pasword down and saved the password info. I successfuly reset my admin. p.w. and now a couple of months later it won't allow me access and it won't access the reset password

Boot from the Install DVD.
See "Resetting the original administrator account password"
http://support.apple.com/kb/HT1274

HT204053 When I initially set up my iPad, I decided not to use I Cloud. Now I want to use it and can't find it in the settings. How do I get it back?

When I initially set up my IPad, I decided not to use ICloud. Now I want it and can't find it in settings. How do I get it back?

Welcome to the Apple Community.
Your profile says you are using iOS 4.3.3, if this is correct you will need to update your iPad before you can use iCloud.

Red light blinks and phone dosen't get on

firstly my os crashed and faded away and the display turns black.then i reinstalled the o.s 10.3 and now red light blinks and the phone dosen't get on!!

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, please try again but increase the wait time in step 4 to 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
If it still continues to fail, then a forceful OS reload (via AutoLoader) would be my next recommended step.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.

The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video. When I open the app the screen is just blank. As it is a default app I can't delete and reinstall. Anybody else experience this?

Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
If that doesn't work then try closing the Videos app via the taskbar : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My ipod 4th gen screen kept jumping this morning. Had to do a restore on it and it is working fine now. However, when I did the restore it did not load the Nike app that was factory installed on my ipod. I use this app daily. Any idea how to get it back

My ipod 4th gen screen kept jumping this morning. Had to do a restore to factory conditions and it is working fine now. However, it originally had a factory installed Nike+ app on it and it did not install with the restore. I use this app daily with the running chip to log my workouts. Anyone know how to get this app back from Apple? Loading the Nike app from the app store is not the same thing as you need gps running continually for it to work (as with an iphone). Can't have that with my ipod unless I'm connected to wifi. Help?? Thanks.

If you go to Settings do you see an entry for the Nike app? There is no way to delete or hide that app?
Have you tired using the Spotlight search? Maybe you just can't find it.
Next would be to restore a gain. First from backup then next to factory settings/new iPod.
The Nike app you can download/install
Nike+ Running for iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod touch (3rd generation), iPod touch (4th generation), iPod touch (5th generation) and iPad on the iTunes App Store
Does work on the iPOd. You just do not get all the information that GPS/cellular connection can get. You will still be able to get distance/footstrikes like the installed app an you do not need the shoe sensor.. It uses the built-in sensors on the iPod

Got new update, instaled on my home server 2008, as I had the previous version. Now with the new Itunes my home sharring is ot working when it use to work fine on the older version

Got new iTune update, instaled on my home server 2008 r2, as I had the previous versionon here. Now with the new Itunes my home sharring is not working when it use to work fine on the older version. However this works fine on my windows 7, Iam guessing the new Itune doesn't support Server ? Or is there some thing i need to do. Can Apple Help me ?

Got new iTune update, instaled on my home server 2008 r2, as I had the previous versionon here. Now with the new Itunes my home sharring is not working when it use to work fine on the older version. However this works fine on my Laptop on windows 7, Iam guessing the new Itune doesn't support Server ? Or is there some thing i need to do. Can Apple Help me ?

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Laserjet 2200d used to work fine; now red light on and can't find problem

Similar Messages

Maybe you are looking for