Laserjet 2600n network driver for vista 64bit

Is there any way I can have a network driver for HP Laserjet 2600n for Windows Vista 64bit .

Vista 64 bit drivers for Laserjet 2600n can be downloaded from the following weblinks:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p...
Refer the following two links to configure the printer on Network
Link1:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
Link2:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

Laserjet 4050n basic driver for vista causes crash on print command

This is a printer that works fine with several windows xp systems on the network, but on this LG LGR40 laptop, the print command causes a bluescreen crash. A previous intsallation of different drivers for vista caused the same problem. The OS is completely uptodate. Pls help!!!
Here's the incident report from Vista:
Product
Windows
Problem
Shut down unexpectedly
Date
29/03/2009 9:33 PM
Status
Not Reported
Problem signature
Problem Event Name:    BlueScreen
OS Version:    6.0.6001.2.1.0.768.3
Locale ID:    4105
Files that help describe the problem (some files may no longer be available)
Mini032909-02.dmp
sysdata.xml
Version.txt
Extra information about the problem
BCCode:    1000008e
BCP1:    C0000005
BCP2:    8CBFBC49
BCP3:    A72CFC98
BCP4:    00000000
OS Version:    6_0_6001
Service Pack:    1_0
Product:    768_1

The printer is on the network, so it's directly to IP address.
The driver was installed as admin user
No problem with the printer for >8 years.
No other vista systems.

Tecra S10-106 - 3G driver for Vista Ultimate 64bit

Hello,
I am owner of a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64bit is much faster as Vista business 32bit, I would like to use Vista ultimate 64bit as operating system, but I can't find the 3G driver for Vista 64bit. All drivers can be downloaded from USA in english and can be used in german, only the 3G driver is missing. Can somebody else send me a download link or tell me where I can find a suitable driver for Vista 66bit?
Thanks in advance.

Hi
To enable the card you will also need to install the 3G RF Power control utility which is here at http://support1.toshiba-tro.de/tedd-files2/0/3grf-en-20090217134719.zip.
That is only half the story as I think you also need to install the Value Added Package here http://support1.toshiba-tro.de/tedd-files2/0/vap-en-20090217134137.zip as this then enables the hotkeys to turn on and off the 3G wireless card.
Hope that helps.
Regards
Phil

Working with iTunes Music Folder locations on a network drive in Vista

I am having challenges assigning the "iTunes music folder location" to a network drive in Vista (using iTunes v.7.3). When I go to Edit/Preferences/Advanced/General, and choose change to assign the path, the Networks folder comes up, but does not display any network drives or expand out when I select it. Right clicking does let me explore the drives and see them so the ntwork is good. I did have the same problem in Windows XP, but since Windows XP created those automatic shortcuts to drives, I could assign them and that worked.
A quick solution is to map a network drive and then select that drive, but since my computer is a notebook and off my home LAN frequently, the mapped drive really slows the boot process.
Can't seem to find anything to change in the registry.
Has anyone else experienced this problem and is there anyone who can offer any suggestion to smooth this issue for me?
Thanks
Andre

Thanks for the feedback, but with the iPhone (I use the calendar feature a lot), synchronising just became a very common event, and perpetual re-connecting will drive me insane.
I guess I will just live with what we have until the folks at Apple figure it out;

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Yes, if the drive is formatted in Mac OS Extended (Journaled).
The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

Network Drives for All Users

I am looking to map a few network drives for any user that logs into our iMac. Is there a way to do this? I know how to do it on a per user level. We just need a few drives to be mapped at all times. Thanks.

Autofs: Automatically Mounting Network File Shares in Mac OS X
Using the Mac OS X automounter

Using external hard drive on a Time Capsule as a network drive for PCs.

I own a Macbook Air and am using a 2TB Time Capsule router. I am currently using for automatic backups for my Macbook Air.
I also own 2 PC laptops for the rest of the family. Would it be possible to use an external hard drive connected to the USB port of the Time Capsule as a network drive for the PCs? I want to share files between the two PCs.
Thanks

Yes, you can do that.. although it is not necessarily as straight forward as you might think it should be.
1. The TC has to be running SMB compatible names. short, no spaces, pure alphanumeric.
2. The disk must be formatted to file system the TC can read. HFS+ or Fat32.. but the HFS+ is vastly superior.. the actual format is irrelevant from sharing point of view as it is still shared via SMB to the network.
3. It is slow.. half the speed of the same drive plugged into your computer.. although if the connection is over wireless that is probably irrelevant.
4. You might need a powered hub to get the drive to work.. Apple underpower the USB.. and even a powered disk still won't work.
5. There are some issues with the TC getting the USB drive to work.. too many factors to say you will have issues or not.. but be aware this is not as straight forward as it could be. or should be.
6. If you want to share files.. you can always share them directly.. pc to pc or pc to mac.. there is no necessity to do it via a network store.. You can also use the 2TB internal drive.. create a disk image and you can then store you data in that. Internal drive is much more reliable and faster.
See http://pondini.org/TM/TCQ3.html

Powershell script to search a network drive for .mdb files and export them to CSV file

Hello all,
I'm trying to search one of our network drives for old .mdb files, I want to write the name, location and date last modified to a csv file.
Get-WmiObject -Class CIM_DataFile -Filter "Drive='S:' And Extension='mdb'
AND ObjFile.drive
AND objFile.FileName
AND objFile.FileSize
AND objFile.LastWriteTime" |
Export-CSV c:\mdb_search\mdbfiles.csv\
Obviously this isn't working or I wouldn't be posting. I've tried many different examples from the net with no joy for now.
Thanks for any help you can offer.

Thanks, that did the job.
Cheers, you're welcome.
How do I get the powershell cursor to return to C:> ?
Should I use "exit" or "break" ?
Neither, the console will return to a prompt when the search has been completed.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

I need hp laserjet 1000 series driver for win 8 64 bit

i need hp laserjet 1000 series driver for win 8 64 bit
[Personal Information Removed]

Hi,
The printer is not supported on Windows 8 or Windows 8.1, a drevice is not available for the OS:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03450061
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Still no working driver for Vista

Heck, at this rate we may be up to RC or RC2 before a working driver is released. I stated in another post that I would not post anymore on this board until a working driver for Vista was released, but was shocked to see that the driver for my Audigy 2 has not been updated and the release schedule still states TBA!!!
For those who are interested, the Vista Transformation Pack #4 provides the best of both worlds. A very similar look to the Vista GUI and the updates, drivers and support that Windows XP offers.
Honestly, why spend over $00 for a sound card and then lose most, if not all, of its functionality just to say that you are running Vista. I know that Vista is neat, but it is a resource hog and who wants to use their motherboard's onboard sound?

Actually the latest Audigy 2 ZS driver for XP works on my Windows Vista Beta 2 build 5456.5.
I've since reactivated UAC, but not driver signing since several drivers are unsigned.
But disabling UAC got my whole Audigy 2 ZS Platinum Pro Creative cd installed, with the exception of the DVD-Audio Player. I then installed all the software updates (except the DVD-Audio), and then the latest driver for XP and the AudioConsole that is part of the install. I did need to run the driver setup twice and let it reinstall AudioConsole over the one it installed the first time.
All works except Soundfont Banks. They don't load, the Soundfont Bank Manager will keep trying to if I start it, but it's a no go. Windows uses only the Microsoft Roland Midi Synth (but it works).
All EAX stuff in AudioConsole works. The software from the cd works too, but since alot isn't being used they're mostly useless. I just use Windows PlayControl and Creative AudioConsole to control stuff.
There's a problem with Windows Media Player where visualizations only play with cd's, but not mp3's from the hard dri've. If I toggle the Audio Quality from, say, 6/44,000 to 6/48,0000 (where I leave it), then the visualizations will show for one song then deactivate again. Kind of given up on it as I'm not about to toggle that and reset everything for every song.
Haven't messed with MediaSourcePlayer yet, except to open it and turn off all the remote control stuff.
Played some games, some music, some DVD's. Stuff sounds fine. When I plug in my headphones it switches my 2. speakers off correctly.
I did need to install PowerDVD 6 Deluxe to get commercial DVD's to play. (Adult movies played fine as they're not copy protected.) Weird DRM error in WMP when it tries to play normal Hollywood DVD's. But PowerDVD plays them fine. The PowerDVD 7 Upgrade removes 6, then fails to install. So I needed to reinstall 6, then update it to 2003e again. It works.
So, it'll be nice to get drivers and software that completely work but until then the XP drivers and most of the software does work.

Unable to map master page gallery as network drive for migrated sitecollection

Hi all,
I am unable to map the masterpage gallery as network drive for design manager for a migrated site.
This is a windows 2008 server r2 OS. Desktop experience in installed.
I am able to map the master page gallery as network drive for two other site collections which is not migrated.
But for the current migrated sitecollection, it throws the familiar error that it is unable to connect.... I already tried unistalling and reinstalling desktop experience.
Kindly help.

Hi sanjuv,
According to your description, my understanding is that you can't map master page gallery in network drive for certain migrated site collection.
If you can open the master gallery with explorer, it means the master page gallery really exists. I suggest you check if the path is valid in the network drive. You can find the detailed path information with the articles below:
1.On the site for which you are creating a design, start Design Manager. (For example, on the Settings menu, choose Design Manager.)
2.In the numbered list, select Upload Design Files.
3.The Design Manager: Upload Design Files page contains the location of the Master Page Gallery. The location probably ends in /_catalogs/masterpage/. This is the location to which you will map a network drive.
4.Make a note of the location of the Master Page Gallery, or copy it to the Clipboard.
Here is a detailed article for your reference:
Map a network drive to the SharePoint 2013 Master Page Gallery
If the issue still exists , I suggest you can check the link below to troubleshooting the connection error with Network drive. You can try to install the kb of IE10 below to test if it works.
https://support.microsoft.com/kb/2616712/en-au?wa=wsignin1.0
https://support.microsoft.com/kb/2846960
Best Regards
Zhengyu Guo
TechNet Community Support

Compatibility of graphics driver for vista with xp

I have a HP Pavilion a6320in desktop. It came installed with Vista OS. I have now installed Win XP. Will the graphics driver for Vista: NVIDIA GeForce 6100 nForce 420, 6150 LE, 6150SE nForce 430, 7100/NVIDIA nForce 630i and 8200, also work for Win XP?
This question was solved.
View Solution.

luit wrote:
I had simply pasted the name of the graphics driver from the HP download page, that's why the names of all the differing devices appear.
I had replaced the original motherboard MCP61PM-HM (Nettle2) with ECS GeForce6100PM-M2. I tried installing winXP, but the graphics were hazy and performance very slow. Somebody suggested I need to install the graphics driver. Will the graphics driver you suggested work?
OK.
Now that is new information that you should have shared earlier with us.
You need to use all of the drivers that are available at the ECS website for the ECS GeForce6100PM-M2 motherboard. Do not use the HP drivers for the replacement motherboard.
FYI ..Once you replace the motherboard with a different brand than delivered your desktop PC ceases to be an HP desktop PC.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

MOVED: Cant load networking driver for neo 2 plat

This topic has been moved to AMD64 nVidia Based board.
Cant load networking driver for neo 2 plat

1. Put your Windows CD in the drive.
2. Select Install Windows.
3. Let install continue.
4. After the first restart, you will see something about Recovery Console. Do NOT select this option. Just let setup continue.
5. You will soon see a message "searching for existing Windows installation".
6. Soon after, you will be given the option to REPAIR that installation or make a new installation.
7. Select REPAIR.
8. Just keep going.
That's it. Hopefully things will be just fine after the repair is done.

Hp Laserjet 1015 Printer Driver for Windows 8 64bit

I am Using Windows 8 64bit in my laptop. I want to Connect my laptop with Hp Laserjet 1015 printer.It is a Network printer and I am unable to found a sutable Driver for my laptop. I'm badly In need of the driver.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I did find the a document on how to install the printer on Win 8.
HP LaserJet .
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet 3100 driver for Vista OS

Need help finding a driver for my Laserjet 3100 on Vista OS
Thanks

DA61--
Here's another idea, with a caveat.
**I do not know if it will work. Please create a restore point on your PC before attempting this.**
Here is a link to the download page for the LaserJet 3200. It is a later version of the 3100.
http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=60706&swLangOid=8&swEnvOid=2093
Please let me know if you try this and how it turns out.
Best,
AlliBee
I am an HP employee, but opinions expressed here are my own.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if your problem is solved. If both apply......do both.

Laserjet 2600n network driver for vista 64bit

Similar Messages

Maybe you are looking for