Laserjet 2600n printer.when i print demo page coming, one page inside 1 and half print.

i have hp colour laserjet 2600n printer.when i print demo page coming, one page inside 1 and half print. i need solve the problem please help me

Your printer should have a little window on the top for you to set the Language, Power Setting, Paper Size and Print Quality etc.

Similar Messages

  • Color Laserjet 2600n print quality is terrible! Help!

    I have had my 2600n for about two years now and I've never been able to get it to print like it should, the demo page is beautiful every time, but anything from my computer looks terrible, there are certain things I can tweak and they'll print pretty well but I'm constantly running into problems. I would blame it on the toner or the printer but like I said, the demo page looks amazing every time, so it has to be a computer thing. Has anyone else had a similar problem? I'm getting so frustrated and I feel like the only fix is spending $300-400 on a new printer which I'd hate to do because this printer should be fine!  I have a MacBook Pro running OSX 10.9, I used to have a Windows 7 PC and I'm pretty sure it had the same problems.
    If anyone has any ideas for me I will be forever grateful!

    The Colour LaserJet 2600n printer is a host-based device, which means that:
    It doesn't understand any of the traditional Page Description Languages (PCL5, PCL6, PostScript).
    All of the major work of rendering is done on the host workstation.
    What is sent to the printer is (a series of) encapsulated, compressed, raster images; the printer just unencapsulates and uncompresses these, and prints the resultant pixels.
    Perhaps what is happening is that the Mac (which, as far as I'm aware) usually natively generates PostScript jobs, and these must be converted (by whatever the Mac equivalent of a printer driver is) to the required (proprietary) host-based format - such conversions sometimes introduce unwanted issues.
    Having said that, if you also experienced the same problems with a Windows 7 workstation, then something else may be responsible for the poor quality. 

  • Networking a HP color laserjet 2600n printer on windows 7 (64-bit)?

    Hello,
    Have an HP Color Laserjet 2600n printer and are running Microsoft Windows 7 (64-bit). I installed >> HP Color LaserJet 2600n Plug and Play Package off of HP website [ http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p... ]. The drivers work fine if you connect via USB port but unfortunately there's no way to connect via network.  Can anyone give me guidance on how to connect the 2006n via a network on windows 7 (64-bit)?
    Thanks
    This question was solved.
    View Solution.

    Have you plugged the printer into your router and does it have a proper IP address?  If so:
    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
    2. Click >> Start >> Control panel >> Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Choose NO.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Color LaserJet 2600n printing 2 green horizontal lines

    Have a Color LaserJet 2600n printing 2 green horizontal lines on each printed copy.

    Hi.
    Can you measure the distance in millimeters between the two lines and post a reply back?
    Kazman
    I am an HP Employee
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • HP Color LaserJet 2600n Printer

    Anybody know how to print on 18 inch card stock on HP Color LaserJet 2600n Printer?

    https://discussions.apple.com/message/23706799?ac_cid=ha123456#23706799

  • I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it.  help

    I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!

    Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.

  • HP color laserjet 2600n - printing problem.

    When the my HP color laser jet 2600n print a page, it is no question if this is blank or colored, the paper show 2 vertical strips constiued for more parallel very thin lines.
    One strip is large about 1.2 cm at 3,5 cm from the edge; the other is large about 0.5 cm at 4 cm from the opposit edges.
    The color of the bands is primarily cyan - green.
    The intensity of the strips is different from any print.
    The problem is increased quickly.
    The levels of any toners are about 45%.
    The HP page print test for the toner cartige do not show any problem (however there are even the 2 verical strips).
    The tranfer roller, after the printig proces, is no clean and present the sames strips above described.
    I cleaned by a liquid soft cleaner the transfer roller and other part easily detachable and finding in this the presence of dirty then removed: any improvement.
    I observe that the photosensitive drums of the cartrige toners (cyan e magenta) are not perfectly clean: it present traces of toner in corrispondence of the bands.
    I think about a phenomenon of fat dirty  that has propagated from the rollerr to the drums.
    Some other user has already found my problem?
    Could I look for to resolve without resort to the after-sales service?
    How to can eventually clean the drums?
    Sorry for my bad English.
    Thank you.

    1. take out all of the ink cartriges and look at the big black roller on the door for streaking, if streaking, clean with a lint free cloth dampened with windex (window cleaner) then close the door.
    2. let it run to initializing.
    3. open the door and look and the black roller on the door to see if you have streaking. If no streaking put one cartridge in and close the door and repeat the steps until you find what cartridge is causing the problem.
    I did this and found that my cyan was creating the lines on my paper. I cleaned the cyan roller with a Qtip and some rubbing alcohol and it works fine now, no more lines on the paper.
    Cheers

  • LaserJet 2600n Print Quality problem (with a scan showing the problem)

    I'm trying to create areas of solid colour in order to use the toner transfer method of making printed circuits.  To do that I need to print really dark solid black blocks - when I try that I see uneven toner in certain areas.  This scan of the output shows the problem:
    There are lighter areas (less covered by toner) at the bottom (page orientation wise) of solid black blocks - but only where there is a subsequent block of black below!  For example, the leftmost shape's bottom edge is fine. 
    I'm perplexed.  I'm very impressed with the configurability of the 2600n, and I get the feeling that there's probably a setting I could tweak to solve this, and I'm hoping that there's a laser printer expert reading this forum who'll have some suggestions.
    Cheers,
    Chris.

    It looks to me as if you have your print quality setting in your printer driver set to standard or draft rather than set to best photo. This setting has to be changed in your printer driver which is accessed by the button in the lower left-hand corner of the screen when you are in the print module.

  • Color LaserJet 2600n printing issues

    When we print color images, the magenta does not print at all. Also it will smudge the ink on both ends of the paper. I cleaned the belt and it wasnt dirty at all. Hoep you can help.

    This seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support.
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    The article for the printer is:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
    This may be the reason why a previous response was not provided or why it was buried..
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • I have OOWriter as my preferred prog.  When open my documents PAGES preempts it and makes changes I don't want.  How do I change my document writer from PAGES as the "default" program? to OOWriter as the def

    I have Open Office Writer as my preferred document program on my MAC.  When I open a document, PAGES intervenes and pre-empts it and makes changes to my OOWriter writen document.  How do I change the default program that opens Open Office Writer documents from PAGES to Open Office Writer?

    Select an OOW file/.doc/docx in Finder > Menu > Info > Open with > browse to OOW > Change all
    Peter

  • My Firefox will not open unencrypted data, when there is a page with encrypted and non encrrypted data

    When I try to review a page, I get a message that some of the info is encrypted and some isn't, then it only shows half the information. how do I get it to show all thee info on the page?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I have bookmarks displayed, but when visit some web pages, they disappear and are replaced by horizontal lines, and sometimes lines that look like barcodes appear around the edges of Firefox 4. Any suggestions how to remove them?

    This happens when I have the Menu Bar hidden. It happened with the betas and now with the RC

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    * [[Troubleshooting extensions and themes]]
    In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
    * Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"

  • How to stop iTunes creating a new library on my hard drive when it can't find the one I have created and told it to use on an external drive?

    I have quite alot of music etc so to save hard drive space I have created my iTunes library on an external hard drive. If I ever accidentaly open iTunes when that external hard drive isn't attached iTunes makes a whole new library from scratch on my computers hard drive. I find this highly frustrating as I often open Itunes to find no music as it have changed librarys and I have to re-load my actual library: very frustraiting and time consuming.
    I would like to know if it is possible to lock iTunes some how to stop it from changing folders when it can'f find the library, or atleast give me a warning that it can't find the library before creating a whole new one????

    Tunes works through a database file which has a list of your tracks.  When you click on a track it looks up in the database which file it needs to play, then plays the file.  If something breaks this link then you get !  The two main ways to get ! are to move a file from where iTunes expects it to be, or to delete it altogether.  I don't know which has happened in your case.  You can try using Spotlight to find a file for the one referred to in a broken link.  If the files have been moved then they need to be moved back.  If they were deleted completely you will have to restore them from a backup or download them again from the iTunes Store and rebuild your library.

  • Firefox crashes every time I open it. Before it crashes, it offers me updates to 2 applications which I deleted when they caused me trouble before - one for FM radio, and another for music (can't remember the exact names)

    I am having trouble replicating the problem - Firefox has stopped offering me the updates, and now crashes about 30 seconds after I open it. I can uninstall and reinstall, but I've done that before, and somehow the updates still find me. When I choose to report the crash, the report is apparently going to Apple, not Mozilla.

    I had the same problem:
    http://discussions.apple.com/thread.jspa?threadID=718750&tstart=0
    This solved it:
    http://discussions.apple.com/thread.jspa?messageID=3413761#3413761
    Hope it helps you as well.

  • Two commercial pages (inside Amazon and United) sites have displays disrupted in 8.0.1.

    Two pages that must display correctly for transactions do not: the Amazon accounts page (https://www.amazon.com/gp/css/homepage.html?ie=UTF8&ref_=topnav_ya) and a United Airlines page (in the URL box attached to this question). Displays are all static. Safari 5.1.1 displays properly. Pre-version-8 Firefox displayed these correctly. Have Style as "Basic" and cleared cache per FAQ info. Using Mac OS X 10.6.8 on an iMac.

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
    Reload web page(s) and bypass the cache.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

Maybe you are looking for