LaserJet 3020 (also known as Prod. No. Q2665A) -- where is the scanning software?

Hi,
I have a LaserJet 3020 (also known as Prod. No. Q2665A), with which I would like to do scanning, when using a Windows 8.1 machine (64 bit).
When I go to the HP support page, none of the downloadable software seems to be about scanning, it's all just about printng.
Am I missing something?  Can you actually scan with the software available on that HP support page?
Here is a link to the support page to which I'm referring:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=378054&spf_p....
Thank you!
This question was solved.
View Solution.

Thanks so much!!  "Windows Fax and Scan" seems to work just great in 8.1.  I never knew that Windows even had this feature.

Similar Messages

  • Hi, how do I back up my iPhoto library to Lightroom, so its also on an external hard drive, where is the Back up utility?

    Hi, somehow I imported all of my iPhoto library into Lightroom, which is saved to an external hard drive, but now I cannot remember how I did that...and I am looking to update the additional photos i've put into iPhoto to Lightroom...
    Thanks for any advice...Eric

    As a mich more powerful app I think you'll find that Lightroom is also quite capable of "uploading, screening, and deleting unwanted photos."
    The point about using both is that you have an overly complex workflow -  and that leads to situations like the one you have now, where you can't recall the workflow you used.
    Put another way, it's like wrting your novel part on Word and part in TextEdit. Which bit goes where? The best advice is to pick one horse and ride it.
    Do don't "import photos to the Finder" you export them from iPhoto to the Finder. File -> Export....
    On your Mac you have Time Machine as a back up application. There are also many, many others. Search on 
    MacUpdate
    Regards
    TD

  • How can I refresh a web site that I use often but it also changes its content frequently. Where is the refresh icon?

    I use to refresh my browser & web pages by clicking on the "refresh" button. This button is no longer on my browser. how can I refresh a web page or keep it up to date if there is no refresh icon to use.?

    Firefox 4 and later use a combined Stop/Reload/Go button that is positioned at the right end of the location bar.<br />
    During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button.<br />
    If you type in the location bar then that button becomes a Go button.<br />
    Middle-click the Reload button to duplicate the current tab to a new tab.<br />
    *https://support.mozilla.com/kb/common-questions-after-updating-firefox

  • LaserJet ToolboxFX and scanning software doesn't work. Please provide an update.

    Hi All,
                Another frustrated AIO user here, Our LaserJet 3050 is a decent printer and an Ok stand alone Fax machine, but the scanning software hasn't worked for a long time and the Toolbox FX software has never worked. There hasn't been a significant update to the software since the Fall of '07, like 3 mos. after we purchased the machine. I can't use the scan buttons on the machine even though I've installed the full software package. The only scanner that works is the native windows one, which slows us down at work. My laptop is an HP pavilion dv8408us and it's had it's share of difficulties as well. How about broadcasting a fix for this stuff? HP should devote more time and energy into making sure things work in the first place? Nice website front page, though.

    error message
    ************** Exception Text **************
    System.IO.FileNotFoundException: C:\Program Files\Hp\ToolBoxFX\bin\..\resources\images\status_critical_32.png
       at System.Drawing.Image.FromFile(String filename, Boolean useEmbeddedColorManagement)
       at System.Drawing.Image.FromFile(String filename)
       at Com.HP.App.HPAppTools.OOVMessageBox.OnLoad(EventArgs e)
       at System.Windows.Forms.Form.OnCreateControl()
       at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
       at System.Windows.Forms.Control.CreateControl()
       at System.Windows.Forms.Control.WmShowWindow(Message& m)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WmShowWindow(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    ************** Loaded Assemblies **************
    mscorlib
        Assembly Version: 1.0.5000.0
        Win32 Version: 1.1.4322.2470
        CodeBase: file:///c:/windows/microsoft.net/framework/v1.1.4322/mscorlib.dll
    HPTLBXFX
        Assembly Version: 2.5.191.0
        Win32 Version: 2.5.191.0
        CodeBase: file:///C:/Program%20Files/Hp/ToolBoxFX/bin/HPTLBXFX.exe
    System.Windows.Forms
        Assembly Version: 1.0.5000.0
        Win32 Version: 1.1.4322.2032
        CodeBase: file:///c:/windows/assembly/gac/system.windows.forms/1.0.5000.0__b77a5c561934e089/system.windows.for...
    System
        Assembly Version: 1.0.5000.0
        Win32 Version: 1.1.4322.2470
        CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
    HPTools
        Assembly Version: 2.5.191.0
        Win32 Version: 2.5.191.0
        CodeBase: file:///C:/Program%20Files/Hp/ToolBoxFX/bin/HPTools.DLL
    AppConstants
        Assembly Version: 2.5.191.0
        Win32 Version: 2.5.191.0
        CodeBase: file:///C:/Program%20Files/Hp/ToolBoxFX/bin/AppConstants.DLL
    HPAppTools
        Assembly Version: 2.5.191.0
        Win32 Version: 2.5.191.0
        CodeBase: file:///C:/Program%20Files/Hp/ToolBoxFX/bin/HPAppTools.DLL
    System.Xml
        Assembly Version: 1.0.5000.0
        Win32 Version: 1.1.4322.2032
        CodeBase: file:///c:/windows/assembly/gac/system.xml/1.0.5000.0__b77a5c561934e089/system.xml.dll
    System.Drawing
        Assembly Version: 1.0.5000.0
        Win32 Version: 1.1.4322.2032
        CodeBase: file:///c:/windows/assembly/gac/system.drawing/1.0.5000.0__b03f5f7f11d50a3a/system.drawing.dll
    HPToolkit
        Assembly Version: 2.5.191.0
        Win32 Version: 2.5.191.0
        CodeBase: file:///C:/Program%20Files/Hp/ToolBoxFX/bin/HPToolkit.DLL
    ************** JIT Debugging **************
    To enable just in time (JIT) debugging, the config file for this
    application or machine (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>

  • Laserjet pro 400 mfp m425dn scan software

    I have a LaserJet Pro 400 MFP M425dn all-in-one device.  I have it connected via USB.  It works as a printer.  I cannot get any of the scan software to recognize that I even have a scanner.
    I have Windows 8.0 (junk).
    I have installed HP Scan and Capture software.  I have installed the drivers - I had to go do devices and put the CD in the drive and search for driver there.
    How do I get the software, HP Scan and Capture,  to recognize the scanner?  I can print fine, I need to scan, too.

    Hello Sardonnic_Pizza,
    I understand your concerns. Unfortunately, for this type of printer, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue.
    Good luck.
    I worked on behalf of HP.

  • My HP Pavilion Notebook can support a solid-state drive (SSD) (also known as a solid-state disk)

    Hi,
    Product Name dv6-6093ex
    Product Number LM610EA
    I don't know if my HP laptop can  support a solid-state drive (SSD) (also known as a solid-state disk or not.

    Thanks a lot,
    I really checked out the prices of SSD at amazon.com
    However, I found that the prices were relatively expensive.
    120 GB
    $88.49
    250 GB
    $132.00
    500 GB
    $231.99
    1 TB
    $439.95
    Do you think it is worth purchasing SSD? Did you find any noticeable benefits since 439.95 dollars would let me purchase another laptop

  • I cannot sort my songs using the "plays" column (also known as the number of plays column). The number of "plays" is not increasing as a song finishes.

    The "plays" column (also known as the number of plays column) is not saving not saving the number of plays (v 11.0).

    My number of 'Plays' was not increasing anymore at some point after updating to Version 11.  I had iTunes rev 11.0.1.12.  Today I updated to the latest rev 11.0.2.26, and now the numer of plays is increasing, so they must have fixed the bug!

  • How do you folks setup your Apple Mouse also known as MightyMouse for iMac?

    Any hints?..., tips?..., pointers?..., suggestions?..., ideas?..., alternative ways?... how you folks out there setup your Apple Mouse also known as Mighty Mouse for the 27 inch iMac 3.2GHz Intel Core i3 Trying to interpret the available documentation that turned up so far... not easy, information in the documentation could be better, more crystal clear ! Needed are more and better diagrams with better labels that better differentiate a variety of setups!

    Go to Systems Preferences and click on the Mouse icon. You have a choice of how fast you want to track, scroll and the double click speed. It also gives you some choices of one-finger and two-finger operations. Change the settings (maybe one at a time) and see what best fits you. What I have my mouse setting on are comfortable for me; they might not be comfortable for you. Try changing the settings in Systems Preferences until you come up with a configuration that meets your needs.
    There is a "mouse" chapter in the "Everything Mac" manual that came with the computer. It has more information on use, settings, etc.

  • There appears to be a MAJOR issue (hang/memory leak) in "about:home", also known as the Firefox Start Page, in Firefox 26.0 on Windows!

    There appears to be a MAJOR issue (hang/memory leak) in "about:home", also known as the Firefox Start Page, in Firefox 26.0, on Windows!
    observed on:
    - Windows 7 x64 machine with 12GB RAM and high-performance CPU (core i7-920)
    - Virtual Machine guest running WinXP SP3 (in Oracle VirtualBox) on the same machine
    - Intel Atom D525 netbook with 4GB RAM, running Win7 x64
    Neither of these machines are connected via Sync or anything like that. The Firefox instance on the VM is a fresh/clean install.
    The problem:
    - 100% cpu usage for 10 seconds, memory usage (PF usage in XP) goes up to 1.7GB
    - if "about:home" is the Firefox Start Page, effectively it hangs the computer at Firefox startup for 10 seconds
    - if "about:home" is NOT the Firefox Start Page, startup is fine - BUT if I press the "home" button on the toolbar it loads "about:home" which causes the same issue again

    Thank you cor-el! Your suggestion has solved the problem on my WinXP VM which I was using to test, and I will soon confirm that it has also solved the problem on my primary Win7 desktop.
    To recap:
    - I set "browser.aboutHomeSnippets.updateUrl" to an empty string
    OLD VALUE: https://snippets.mozilla.com/%STARTPAGE_VERSION%/%NAME%/%VERSION%/%APPBUILDID%/%BUILD_TARGET%/%LOCALE%/%CHANNEL%/%OS_VERSION%/%DISTRIBUTION%/%DISTRIBUTION_VERSION%/
    NEW VALUE: (blank)
    - I deleted the folder \storage\persistent\moz-safe-about+home under the Profile directory
    Actual folder name on WINDOWS XP:
    C:\Documents and Settings\<USERNAME>\Application Data\Mozilla\Firefox\Profiles\<PROFILENAME>\storage\persistent\moz-safe-about+home
    However I have a concern that the '''OLD VALUE''' of "browser.aboutHomeSnippets.updateUrl" will creep back in, in a future update! Can you communicate this issue to someone on the development team?

  • Message to all N95 US owners (also known as Nokia ...

    Hi all,
    we have just received the following notification from the Nokia Software Update team:
    Nokia N95 US version (also known as N95-3)
    Nokia is aware of consumers' demand for a new software release, and our development teams are working to produce the new software as soon as possible. We estimate that the new software should be available early June.
    Please note that your mobile service provider, operator, or carrier may not have approved the latest Nokia device firmware available. Nokia produces many different variants of each product (for different countries and languages) and not all variants will have the latest Nokia device firmware. It is our priority to update all variants as quickly as possible, and we apologize for any delay.
    I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

    Hi, Vandelay
    It's good to know that Nokia is issuing this firmware update, many US N95 users have been waiting for it. I'm also glad that Nokia has begun discussing its US service problems on your new blog. Recent posts:
    - US N95 firmware update: http://urltea.com/37qe
    - US service turnaround time: http://urltea.com/37qg
    - Introduction to US service problems: http://urltea.com/37qf
    However, Nokia's current firmware update process is, as Beth Kanter posted earlier (http://urltea.com/37qd), very clunky and difficult. Is Nokia planning to make its firmware update process any easier for its customers?
    Also, if your firmware update process indeed has a "very low" failure rate, why do Nokia's own service reps discourage users from doing the update unless they're experiencing dire functionality problems? (Beth Kanter captured that happening here: http://qik.com/video/58581)
    Also: Currently new N95-3 units in the US are being shipped with old firmware. ZDNet's Matthew Miller recently wrote: "Every other Nokia N95 has received a firmware upgrade, except for the N95-3 North American version that actually came out before some other devices." (http://urltea.com/37j1)
    Given that situation, and the difficulty of your firmware update process, can Nokia arrange to update the firmware on new units *before* they are shipped to customers?
    From the customer's perspective, it's extremely discouraging and annoying to receive a brand-new phone and immediately have to endure your currently cumbersome firmware update process. Your main competitor in the US high-end phone market (Apple) does not present consumers here with such obstacles.
    Finally, does Nokia have any plans to release a Mac-friendly version of its firmware updater? Many N95 users are also Mac users, and it's a major hassle to have to get access to a PC for this function.
    Again, I'm *very* glad to hear that you're issuing this update. That is progress. I'm hoping Nokia can address these other firmware-related concerns so you can become truly competitive in the US high-end phone market.
    The N95 is a superior product in many ways, and I hope it succeeds here. I believe enhancing Nokia's US service sooner rather than later is the key to success in this market -- especially given that your key US competitor (Apple) offers fast and excellent service.
    Thanks,
    Amy Gahran

  • Labview driver for Sony EX frontend (also known as 01dB-Metra​vib Orchestra)

    I am looking for information on a third party driver for the Sony EX-IF10 data acquisition frontend.  I know sony made a driver as it was advertised in promotional materials.  Unfortunately the division of Sony seems to have been sold.
    Very similar hardware (identical) has also been sold under the name 01dB-Metravib Orchestra.
    Any help is appreciated.
    Heres a link to a sony promo poster: http://assets.sonybiz.net/doc/sesdatasheets/Front-​end_EX-Series(brch).pdf

    Hi
    I’ve been working with Sony EX series professionally for many years. Sony Manufacturing Systems Corporation manufactured and promoted this system and later also discontinued it, officially because of environmental reasons in the production line. They later also went away from the data acquisition market were they had been successful earlier on with tape recorders.
    So what is your current Sony EX Series system configuration, do you only have hardware or do you also have Sony PCscanIV software?
    The Sony EX series driver is only for 32bit OS and EX-UT10 interface doesn’t support multiprocessor operation or hyper threading technology. I only use computers were I have disabled multicore and run on one single core. Can be run on multicore but not stable in my experience.
    Regarding third-party software I had a contact with Sony Manufacturing Systems in Japan and the MATLAB mexEX subroutine were never sold or even finalized. Sony Manufacturing Systems didn’t want me to use or try it. As for LabVIEW Sony Manufacturing Systems are the supplier so only if someone else has a driver.
    With the other software suppliers you only need the Sony EX driver and maybe a dongle. I use Head Acoustics Head Recorder software witch support all Sony EX modules and several other DAQ units, works with a licensed dongle.
    Sony EX series was delivered with Sony PCscanIV software for acquisition and post processing. You had the option of STD / ADV / PRO / RTA on a license dongle.
    The system was hardware supported up until 2015 some spare part may still be available.
    http://web.archive.org/web/20060411120722/http://w​ww.sonysms.co.jp/e/products/datarecorder/pdf/EX_Se​...
    regards / Fredrik

  • HP Laserjet 3055 printer "waiting for printer to be available" after HP Printer Software Update 3.0

    I have an HP Laserjet 3055 All-in-One Printer. It has been printing just fine from my iMac running OS 10.9.5 (Mavericks) until after the HP Printer Software Update, Version 3.0, that I installed on 1 Oct 2014. Although the 3055 is shown as connected/idle to my iMac via USB, after clicking "PRINT" for a document, the print queue status soon changes from "printing" to "waiting for printer to become available", and the printer never becomes available. I have tried rebooting everything (printer, computer, text software), checking USB cable connections and changing USB ports, deleting and re-adding the 3055 printer (numerous times!) even after resetting the print system, but could there be something inherently wrong with the latest HP driver (version 19.9 for HP Laserjet 3052)? Or is it possible something else is going on?  In other words, I have exhausted all the solutions I've found in these and other forums to no avail.
    I have tested this printer by connecting it to my MacBook Pro (also running OX 10.9.5) but without having installed the HP Printer Software Update, Version 3.0. (Hadn't gotten around to this update...) The printer works fine, even though the driver has the same version number--19.9 for HP Laserjet 3052. So could the version 19.9 driver in the latest HP Printer Software Update be corrupted? Is there any way to reinstall that driver? Or copy the 19.9 driver from my MacBook Pro and install it on the iMac? HP only refers to the Apple Software Update process for Mavericks compatible drivers for this printer. Can I manually uninstall the HP driver for the Laserjet 3055 from my iMac and then have the iMac download the driver again in the process of re-setting up the 3055? Any suggestions appreciated.

    Many thanks for your suggestions. After creating a bootable back-up, I tried the first suggestion--downloading and re-installing the HP printer driver update kit for which you kindly provided the link--but to no avail. Before downloading the driver update kit, I "reset the printing system", clearing all the installed printers, queues, etc. After re-installing the HP printer drivers, I went to System Preferences>Printers & Scanners to once again add the HP LaserJet 3055 only to discover it was already listed as installed! This I find baffling, to say then least. I tried printing and again got the "waiting for printer to be available" message. I subsequently tried deleting and re-adding the printer, going through the printing system reset again, but still no-go.
    I also tried another approach to adding the printer which perhaps will shed some light on the problem. After clicking on the "+" button to add the printer, I select the "HP LaserJet 3055" which shows up as available via USB. Then, instead of using the "HP LaserJet 3052" driver that automatically appears in the "Use" [choose a driver] field, I chose "Auto Select" to see what happens. As the computer processes this request, the status message changes from "Gathering printer information..." to "Waiting for printer to become available..." And, of course, it never becomes available. This strikes me as odd, that the printer set-up system "sees" the printer accurately enough to list it as available to add but can't find it with the "Auto Select" approach to getting the appropriate driver. Of course, when I simply go with the "Use HP LaserJet 3052" driver option that, naturally enough, is the one automatically suggested by the printer set-up system, the printer is "successfully" added. I say "successfully" in quotes because it never becomes "available" to print something.
    Before I try your second suggestion--downloading and re-installing the 10.9.5 combo update--I wonder if it's possible that the printing system reset process is "broken". It's as though the reset fails to clear the printer queue, making it appear that there is a pending printing job that the system is waiting to be finished. Also, as noted above, I reset the printing system prior to re-installing the HP printer driver update kit and then, after installation, the HP LaserJet 3055 magically had already been added. This makes me wonder if the printer wasn't properly "cleared" from whatever makes up the printer System Preference process during the reset.
    Any other thoughts?

  • HT1386 Is my agenda also synced to my computer and where can I find/check it on the computer?

    Is my agenda also synced to my computer and where can I find/check it on the computer?

    Currently shipping docs are for Oracle Waveset 8.1.1
    http://docs.sun.com/app/docs/prod/sjs.ident.mgr81~1514.7#hic
    You'll probably want to start with the Deployment Guide & Reference to get a feel for the different components.
    Specifically, you're looking for something better than Ch. 5 : XPRESS Lanugage in the Deployment Guide.
    http://docs.sun.com/app/docs/doc/821-0378/bvbps?a=view
    You should review the forms and look for the dependencies of other forms, libraries, rules et al.
    Forms may be used by workflow, the other major XPRESS execution area in Waveset.
    In certain deployments, reusable form components are stitched together with elegance; in others, it's a train wreck of one-use forms that duplicate vast amounts of unreadable code in dozens and hundreds of files.
    Typically, a build procedure is generated to allow you to click forms into a larger project deployment structure. Without knowing what's lying around, it's tough to examine a single file and get an idea for how the object affect the installation...
    The netbeans plugin for Waveset provides easy access to help on many functions and the entire javadoc set for com.waveset, which may have shortcuts you can learn from... especially around building a base project and customizing simple objects.
    If the Identity System Essentials tutorials are still around, they were a good place for template examples...

  • HP LaserJet Enterprise 500 551dn - where did the drivers go?

    I go to the download page to download the drivers for this 551dn.  I download all windows 7, 8, 8.1, 2008, 2012, so that i can put them on my print server.  I downloaded them from here..
    <http>//h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5081348&lang=en&lang=en&cc=lamerica_n...
    when i get the file, lets say for windows 7/64bit, i choose...
    HP LaserJet Enterprise 500 color M551 Printer Series PCL6 Print Driver (no Installer) 61.130.04.12834
    24 Sep 2014 21.3
    I get the file downloaded (LJEnt-color-M551-Drv-no-installer_12297.exe), i run it, get the security warning and Run.  the file extracts - then POOF, the installer is gone.
    where did the files go?  They aren't on the root of the C: drive, a folder/files were not created on my desktop, no files or folder created in my downloads folder.
    I was never asked for a file save location.... ???  really?   is this this basic stuff? 
    Where are the files?  this $$$ printer is a brick until i get drivers! 
    Thanks!
    Jason
    UPDATE- I FOUND THE FILES!!
    First of all, HP... i'm not impressed.
    All the files for all the drivers are in a series of temp folders...
    C:\Users\-myusername-\AppData\Local\Temp\3\7zS4A73
    really?
    hope this helps someone. 

    There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
    Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
    HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

  • Will the scan function of an HP Color LaserJet CM2320nf MFP work with Lion?

    I have a Macbook Air connected to a Windows Small Business Server 2003.  I can print on the HP 2320 fine with the Print & Scan utility, however the utility won't recognize the HP as a scanner.  The forums I have read on Apple regarding other HP all in one printers is that they can't scan.  HP's support forum is iffy at best; some locations indicating that a fix is due "late 2011", but sending me in a circular link pattern to find a solution.  I have tried downloading the HP LaserJet AiO/HP Director to no avail, even connecting directly to the printer/scanner via USB.  Downloading the drivers doesn't resolve. 
    Based on this HP link, I believe that scanning isn't supported.  I am dumbfounded by this.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02950970 #A2 

    The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Maybe you are looking for