Laserjet 3100 driver for Vista OS

Need help finding a driver for my Laserjet 3100 on Vista OS
Thanks

DA61--
Here's another idea, with a caveat.
**I do not know if it will work. Please create a restore point on your PC before attempting this.**
Here is a link to the download page for the LaserJet 3200. It is a later version of the 3100.
http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=60706&swLangOid=8&swEnvOid=2093
Please let me know if you try this and how it turns out.
Best,
AlliBee
I am an HP employee, but opinions expressed here are my own.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if your problem is solved. If both apply......do both.

Similar Messages

HP LaserJet 1010 driver for Mac

Good afternoon, everyone! I need your help!
I badly need an HP LaserJet 1010 driver for Mac OS X 10.7. It has been written that PowerPC programms are not supported any more. Don't know how to cope with this problem.

Hi,
Follow these steps below to install the printer via Apple Software Update, the original CD is intended for older operating systems:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=3...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to install HP Laserjet 1020 driver for MAC 10.8.5?

How to install HP Laserjet 1020 driver for MAC 10.8.5? When I upgraded from Lion to Mountain Lion, my ability to print disappeared. Where can I get a driver that works? Thanks.

See:
Re: HP laserjet 1020 no driver for mac
Re: How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

Still no working driver for Vista

Heck, at this rate we may be up to RC or RC2 before a working driver is released. I stated in another post that I would not post anymore on this board until a working driver for Vista was released, but was shocked to see that the driver for my Audigy 2 has not been updated and the release schedule still states TBA!!!
For those who are interested, the Vista Transformation Pack #4 provides the best of both worlds. A very similar look to the Vista GUI and the updates, drivers and support that Windows XP offers.
Honestly, why spend over $00 for a sound card and then lose most, if not all, of its functionality just to say that you are running Vista. I know that Vista is neat, but it is a resource hog and who wants to use their motherboard's onboard sound?

Actually the latest Audigy 2 ZS driver for XP works on my Windows Vista Beta 2 build 5456.5.
I've since reactivated UAC, but not driver signing since several drivers are unsigned.
But disabling UAC got my whole Audigy 2 ZS Platinum Pro Creative cd installed, with the exception of the DVD-Audio Player. I then installed all the software updates (except the DVD-Audio), and then the latest driver for XP and the AudioConsole that is part of the install. I did need to run the driver setup twice and let it reinstall AudioConsole over the one it installed the first time.
All works except Soundfont Banks. They don't load, the Soundfont Bank Manager will keep trying to if I start it, but it's a no go. Windows uses only the Microsoft Roland Midi Synth (but it works).
All EAX stuff in AudioConsole works. The software from the cd works too, but since alot isn't being used they're mostly useless. I just use Windows PlayControl and Creative AudioConsole to control stuff.
There's a problem with Windows Media Player where visualizations only play with cd's, but not mp3's from the hard dri've. If I toggle the Audio Quality from, say, 6/44,000 to 6/48,0000 (where I leave it), then the visualizations will show for one song then deactivate again. Kind of given up on it as I'm not about to toggle that and reset everything for every song.
Haven't messed with MediaSourcePlayer yet, except to open it and turn off all the remote control stuff.
Played some games, some music, some DVD's. Stuff sounds fine. When I plug in my headphones it switches my 2. speakers off correctly.
I did need to install PowerDVD 6 Deluxe to get commercial DVD's to play. (Adult movies played fine as they're not copy protected.) Weird DRM error in WMP when it tries to play normal Hollywood DVD's. But PowerDVD plays them fine. The PowerDVD 7 Upgrade removes 6, then fails to install. So I needed to reinstall 6, then update it to 2003e again. It works.
So, it'll be nice to get drivers and software that completely work but until then the XP drivers and most of the software does work.

Tecra S10-106 - 3G driver for Vista Ultimate 64bit

Hello,
I am owner of a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64bit is much faster as Vista business 32bit, I would like to use Vista ultimate 64bit as operating system, but I can't find the 3G driver for Vista 64bit. All drivers can be downloaded from USA in english and can be used in german, only the 3G driver is missing. Can somebody else send me a download link or tell me where I can find a suitable driver for Vista 66bit?
Thanks in advance.

Hi
To enable the card you will also need to install the 3G RF Power control utility which is here at http://support1.toshiba-tro.de/tedd-files2/0/3grf-en-20090217134719.zip.
That is only half the story as I think you also need to install the Value Added Package here http://support1.toshiba-tro.de/tedd-files2/0/vap-en-20090217134137.zip as this then enables the hotkeys to turn on and off the 3G wireless card.
Hope that helps.
Regards
Phil

Compatibility of graphics driver for vista with xp

I have a HP Pavilion a6320in desktop. It came installed with Vista OS. I have now installed Win XP. Will the graphics driver for Vista: NVIDIA GeForce 6100 nForce 420, 6150 LE, 6150SE nForce 430, 7100/NVIDIA nForce 630i and 8200, also work for Win XP?
This question was solved.
View Solution.

luit wrote:
I had simply pasted the name of the graphics driver from the HP download page, that's why the names of all the differing devices appear.
I had replaced the original motherboard MCP61PM-HM (Nettle2) with ECS GeForce6100PM-M2. I tried installing winXP, but the graphics were hazy and performance very slow. Somebody suggested I need to install the graphics driver. Will the graphics driver you suggested work?
OK.
Now that is new information that you should have shared earlier with us.
You need to use all of the drivers that are available at the ECS website for the ECS GeForce6100PM-M2 motherboard. Do not use the HP drivers for the replacement motherboard.
FYI ..Once you replace the motherboard with a different brand than delivered your desktop PC ceases to be an HP desktop PC.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Laserjet 2600n network driver for vista 64bit

Is there any way I can have a network driver for HP Laserjet 2600n for Windows Vista 64bit .

Vista 64 bit drivers for Laserjet 2600n can be downloaded from the following weblinks:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p...
Refer the following two links to configure the printer on Network
Link1:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
Link2:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Laserjet 4050n basic driver for vista causes crash on print command

This is a printer that works fine with several windows xp systems on the network, but on this LG LGR40 laptop, the print command causes a bluescreen crash. A previous intsallation of different drivers for vista caused the same problem. The OS is completely uptodate. Pls help!!!
Here's the incident report from Vista:
Product
Windows
Problem
Shut down unexpectedly
Date
29/03/2009 9:33 PM
Status
Not Reported
Problem signature
Problem Event Name:    BlueScreen
OS Version:    6.0.6001.2.1.0.768.3
Locale ID:    4105
Files that help describe the problem (some files may no longer be available)
Mini032909-02.dmp
sysdata.xml
Version.txt
Extra information about the problem
BCCode:    1000008e
BCP1:    C0000005
BCP2:    8CBFBC49
BCP3:    A72CFC98
BCP4:    00000000
OS Version:    6_0_6001
Service Pack:    1_0
Product:    768_1

The printer is on the network, so it's directly to IP address.
The driver was installed as admin user
No problem with the printer for >8 years.
No other vista systems.

Nvidia Geforce 8600M GT Driver for Vista

Hi mac-world!
I'm using BootCamp to start Windows Vista on my Mac Book Pro. I recently bought a seperate TFT-Display from Belinea, which I connect to my Mac Book via DVI. This isn't a Problem while using MacOS, but in Vista I can't adjust the resolution of the seperate Display to more than 1024x768 px. I already installed the Belinea Driver, but that doesn't solve the problem.
I am wondering, if I maybe need a driver update for the grafic-card. Unfortunately, Nvidia doesn't provide a driver download, but says, I need to contact my Laptop-Vendor for this issue. I didn't find a driver-download section on this page. Does someone know a solution? Where do I get the new driver?
Thanks in advance
regards
Thorsten

In my case after going through normal Shut Down procedures, I
noted that after I go through normal shut-down-from-Windows, the machine does not power off. I can only turn off the machine by pressing the power switch for a few seconds.
When I do not press this switch, Windows restarts after about ten minutes;
after, however, I receive a brief report (which I never manage to read in full)
informing me that a software may not have been properly installed or that I
need a windows update.
This problem appeared long after I installed all the software that I use,
and I have checked whether I'm fully updated (I am).
Lately when I start-up after experiencing this problem, Windows indicates
that the problem is caused by an NVIDIA graphics driver and suggests that I
check for a driver update. I have tried the NVIDIA Website but there was no
reference to the graphics card installed in my machine, namely GeForce 8600M
GT - I only found a driver for GeForce 8700M GT.
I have since solved the problem as rerported in http://discussions.apple.com/thread.jspa?threadID=1492731&tstart=0
However, I stll wonder why there is no reference to 8600 in the NVIDIA site.

NVIDIA GeForce 8600M GT driver for Vista x64

Hello,
I have an issue with my new MacBook Pro 2.4Ghz 17" that was released on the 5th of June, 2007.
It has NVIDIA GeForce 8600M GT installed on it and I simply cannot find Vista 64 bit drivers for it.
I have tried the latest beta Vista x64 drivers (163.11) downloaded from nVidia's official website. I have tried several previous versions including 100.97 one, which contains drivers for 8600M GT model. But they don't work with me. All the driver installation programs allert the following error and quit:
'The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit'.
I also tried Vista 32-bit drivers for 8600M GT. The driver installation program claims the operation system is wrong and quits.
Anybody has the same issue?
Does a working driver of nVidia GeForce 8600M GT for Vista x64 exist at all?
MacBook Pro 2.4Ghz Windows Vista nVidia GeForce 8600M GT

There was one Apple's presentstion where they boot into Windows Vista. So if you claim you can do it why do you forget about Vista x64 customers? I reckon it is because of Leopard that is coming. But it's not an excuse.
I'm currently working in Vista x64 and everything is fine except one thing, I cannot find a working graphics card driver and it is manufacturer's responsibility to provide it. Apple knew there going to be customers who will install Vista x64 on their computers and they at Apple didn't care about it because I guess it's a lame war between you know who.
So why you don't make everything perfect to attract even more Windows customers but instead you hint that you don't care about Vista x64 as you are getting your own 64-bit OS soon. So now they are forcing me to wait having been announced that I can use Vista. But isn't that kind of lame that it's slightly tardy? Why I should wait for Leopard launch if I was insured that Windows will work on my Macbook Pro? Because Apple claim you can run Windows. And don't say it's not official. Who else if not Apple made it possible to run Windows on Mac.
Don't get me wrong, I'm not trying to insult you. I'm just angry that I cannot find a working driver.
Message was edited by: Melnyk

HP LaserJet 1005 driver for Windows 8.1 x64

Hello,
I'm unable to install the HP LaserJet 1005 series driver on my Windows 8.1 x64. Here is what I've done so far:
- downloaded ljP1000_P1500-HB-pnp-win64-en.exe
- started the installer program
- it successfully extracted installation data into C:\Program Files\HP\HP LaserJet P1000_P1500 Series
- (the printer's USB cable is not yet connected)
- A pop up window appears: "Waiting for user to connect the device."
- I connect the USB cable to the computer. The printer is turned on. (The USB cable is OK - verified on a different PC)
- However, the installer is unable to detect the connected printer. The following messages are reapeatedly written into the installer's log file:
[ 4- 6-2014 14:35:21:085]- LOG(8F0): IsNewDeviceConnected(vidpidList with 6 elements)
[ 4- 6-2014 14:35:21:153]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3D17)
[ 4- 6-2014 14:35:21:220]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:287]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4817)
[ 4- 6-2014 14:35:21:354]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:423]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4917)
[ 4- 6-2014 14:35:21:492]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:559]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3E17)
[ 4- 6-2014 14:35:21:625]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:692]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3F17)
[ 4- 6-2014 14:35:21:760]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:828]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4017)
[ 4- 6-2014 14:35:21:895]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
- note that after connecting the printer's USB, the printer appeared in the Devices and Printers Windows view. However, when I click on Properties and Driver -> Hardware I get that no drivers have been loaded for it.
It looks like the program cannot find the connected printer it this is causing the failure. Here is a download link to the full log file: log.
I've also checked the following two threads which adress similar problems, but there is no workaround in there for my specific problem:
- HP LaserJet p1005 windows 8 driver ?
- Windows 8 driver for LaserJet P1005 printer?
Please advice on how to proceed in this situation. Please let me know if you need further information.
Best regards,
Atanas

Hello Shindov,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Laserjet P1005 driver for winows 7 64bit

I am a member of MSDN, I installed winows 7 Professional 64 bit. It is a good system, but......
I have Hp Printer Model Laserjet P1005, I tried in compact mode, it still does not working in . I need driver for it.
Thanks

blakescience wrote:
Hi, i have tried the driver (the 2 drivers) and don't work. You send a document to the printer and it does nothing. Why? Why the drivers don't work?
I would suggest downloading and running the HP Printing Diagnostic Utility.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP laserjet M2727 driver for OSX 10.7.4 crashed application

I recently updated hp laserjet driver for M2727 nf printer. When I hit the print command, it crashes the application and does not print. Any suggestions to fix it?

What application are you referring to?

Laserjet 1300 driver for Win7 problem

Plugged my Laserjet 1300 into my new computer (System 7) via USB- and Windows couldn't find the right driver for it.
I canceled Windows trying to install driver automatically, and put original CD driver disk (Serial #Q1334-60107 ver 2.0) into drive-
but couldn't get Windows to recognize printer, even after re-boots.
Since I bought printer a while ago, I checked for updated drivers online, that would be 64 bit.
I installed this one:
upd-pcl5-x64-5.4.0.11744.exe
During driver install I plugged in printer & turned it on at what i thought was right time. I see this:
"HP Universal Printing PCL 5" as printer- but it won't print.
Tried Windows 'Uninstall' feature but it doesn't show the driver, to un-install it- OR where the driver's located.
** QUESTIONS: How do I Un-Install the driver? Do I use upd-pcl5-x64-5.4.0.11744.exe OR original disk driver #Q1334-60107 ver 2.0?
What's the procedure for installing this?- I can't find anything, despite an afternoon of Googling.
Thanks.
This question was solved.
View Solution.

Did you follow this guide to install the print? Installing LaserJet 1300 on Windows 7
You should not need to navigate to the driver you download. Actually stick it in the trash can for now When you selecet "Add a Printer" you need to select "Add a local printer." Ignore the writing to the right, that only applies if everything is working properly. If you follow the guide at the top it should get installed properly.
No need to feel foolish and no problem at all for helping. Thats what I am here for
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Hp laserjet 1102 driver for maverick

friends, i'm serching for solution to driver problem as i had updated my mac to maverick the problem is that my laserjet 1102 is not printing anymore pls help

It appears HP may not have released a driver for 10.9. Only shows 10.8, but maybe it will work.
http://www8.hp.com/us/en/support-search.html?tab=1#/qryterm=laserjet%201102&sear chtype=s-002

Laserjet 3100 driver for Vista OS

Similar Messages

Maybe you are looking for