LaserJet 4 plus printer/windows 10

My laserjet4 plus printer was working fine with windows 8.1. Just updated to windows 10 and it doesn't print or see it anymore. Using a Solectek Laser Access parallel to connect with a parallel to usb connection. I added printer from control panel but still no luck. Any solutions other than buying new printer?

rfk15n is brilliant!!!!! Like rfk15n, I moved from Windows 7 to Windows 10 and have a LaserJet 4. I just didn't understand the part of his/her instruction about the "virtual usb port." Eventually, the Microsoft people helped me. What rfk15n was saying was that, when you are manually installing the printer (LaserJet 4 or 4 Plus), you will have a choice to make about ports. I kept blowing past that. Don't blow past it, but click on the choices in the port area. That's where you will find the "virtual usb." Click on that. Then click on the LaserJet 4 or 4 Plus in the list that Windows 10 provides, as appropriate for your printer. When you click to print the test page, it should work like a charm. (I kept getting error messages and couldn't get my printer to work before I got the port problem fixed.) You do NOT need to get any kind of special parallel USB converter that is "windows 10 certified." It is all in the port you click.

Similar Messages

HP Laserjet 4 Plus printer driver

I need a compatible printer driver for HP Laserjet 4 Plus printer. I have Windows 7 - 64 bit.

The Laserjet 4 Plus driver is supplied through Windows Update for Windows 7. You can do the following: click Start, Devices and Printers, Add a Printer, select the correct port, Next, then select Windows Update, then select HP as the manufacturer and select the Laserjet 4 Plus.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP LASERJET 1020 PLUS PRINTER PRINTING PROBLEM

HI.
I AM RAJA PAUL FROM INDIA, I HAVE A HP LASERJET 1020 PLUS PRINTER , NOW A DAYS I AM FACE ING A PROBLEM , WHEN I AM GOING TO PRINT FROM THIS PRINTER , EVERY TIME PRITING LETEER SHOW Distorted characters. WHAT I DO?

Hi @rajahp ,
I see by your post that the printer is printing distorted characters. Thanks for providing the screen shot. I can help you.
It looks like a issue with the toner or possible a hardware issue with the printer or fuser.
Inspect the toner cartridge for damage:
1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
2. Check the memory chip for damage.
3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
Fingerprints on the imaging drum can cause print-quality problems.
4. If you see any scratches, fingerprints, toner on the drum or other damage on the imaging drum, replace the toner.
5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
I have provided a document for cleaning inside the printer and running a cleaning page, resetting the printer and checking the driver settings. Resolving Print Quality Issues.
Try printing a document again.
Let me know the results.
What kind of paper are you using?
Try another type of paper to see if you have the same results.
Are you using Genuine HP Toner?
What is the toner level?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Using HP Laserjet 4m plus with Windows 8.1

My pc is a HP p6-2376pc w/Windows 8.1, my Printer is HP laserjet 4m plus using TCP/IP and ethernet conection.
Using both manual and auto set-up my printer will not print from pc.
Will print test page manually. Will cancel pages in queue from pc.
Manual test page shows Printer IP Address is Port 10.2.144.123
PC shows IP Address is Port 192.168.1.47
I have tried unsucessfully to configure the two.
I keep getting back error code # 0x803C010B
Is there a patch or anyway to correct the issue?
Thanks in advance.
Rene'

@reneis1forever
How did you install the 4m plus driver? We recommend that you use the Windows Update driver via a network connection. For your convience, here are some instructions showing how to use/load the drivers. Have you tried loading the drivers this way and seeing if this resolves your issue?
HP LaserJet - Driver support included in Windows 8 / Windows 8.1 or in Windows Update
Good Luck.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP Laserjet IIp plus printer driver

Hi Guys - need help locating a printer driver for HP Laserjet IIp Plus. Trying to get this thing attached to a blue iMac running OS 9.2. Have searched everywhere I can think of. Just hoping someone out there has something with 9.2 running same, or a good lead...
Thanks in advance

Hi, John. HP offers no Mac drivers for the IIp or IIp+, probably because they were built with only a parallel-port interface, which Macs can't use. They are not PostScript printers, so even if you could connect yours to your Mac, it couldn't use the Apple or Adobe PostScript driver that some HP printers (e.g. my LaserJet 4M) can use.
I believe the only way you'll be able to use the IIp+ with any Mac will be to locate a used Infowave PowerPrint cable-and-driver package (the cable is essential; the driver alone would be of no value). But that will only help you on a Mac that can boot into OS 8.x or 9.x and has an ADB port, which no iMac does. And when it was new, PowerPrint was expensive: it cost more than many low-end printers, so most people just replaced their printers instead of bothering with PowerPrint. Even PowerPrint won't serve your needs unless you have an old ADB-equipped Mac to run it on, so you should probably plan to use a different printer instead of the IIp+.

My hp laserjet 1020 plus printer is not working in network in window 98 Pl give me a solution

hiiii...

Hi Gaurav,
The printer is not compatible with Mac as you may see below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01973413&tmp_track_link=ot_faqs/top_issues/en_u...
You may try the following workaround and check if tha may work:
Download and install the following package:
http://support.apple.com/kb/dl907
Ensure the printer is powered on and connected to your Mac.
Go to System Preferences > Printers & Scanners.
Click the plus sign and select the printer.
Click the Use menu and then click on Select Software.
Select the HP Laserjet 1022 from the list and click on Add.
Now try printing using the added Print Queue.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Laserjet 4 plus prints after 6 to 8 pages

The printer initially prints a blank page working up to a pretty good print after 6 to 8 pages, and prints fine if I continue to print. If I let the printer sit then try to start printing the same problem occurs. I installed a new toner cartridge, made no difference. I've taken the unit above the paper tray out and cleaned it. It looks fine to me. Could the heater button resting against the roller be taking time to warm up?
On a separate problem, I get a paper jam where I have to open the back flap and pull out the logged paper fairly often. I do have to use lighter grade paper for printing, or I get jams all the time. Thanks

Howdy joseigor,
As someone who uses my iPhone's camera almost daily, I know I would be distressed to find that suddenly the pictures I am taking are blurry. Let's see if we can get you back up and running.
I would suggest that you troubleshoot using the steps in this article -
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
In particular the section titled Your photos are blurred or out of focus.
Thanks for using Apple Support Communities.
Best,
Brett L

Windows 7 and HP LaserJet 4 Plus

I have a new laptop with windows 7 and an old (but very reliable) LaserJet 4 Plus printer. I was able to download print drivers from the HP site but it still will not print. I don't get any error messages, just nothing happens when I try to print a document or test page. Do I need to change something else in my settings?
This question was solved.
View Solution.

There are two main areas for issues installing a Laserjet 4 in Windows 7:
Ports. The Laserjet 4 and its derivatives had a standard parallel port but most Windows 7 machines no longer have a parallel port. The most common solution is a USB-parallel converter cable. This can be problematic because many of the converter cables do not support Windows 7. [Edit - the posts flagged here have models of converter cables users in the forum has reported as working in Windows 7.] Additionally, most of the cables have no documentation (or even a brand name) making it difficult to resolve issues. The converter may provide a simulated parallel port such as LPT3: or it may be a port like USB001:. Another option with the Laserjet 4 would be to add a JetDirect card which would provide a network port for the Laserjet 4. This will require the Laserjet to be connected to a router and would provide network access to multiple computers if you wish. A typical JetDirect card for the Laserjet 4 is shown here.
Drivers. The drivers for the Laserjet 4 (and 4M and other derivatives) are delivered through Windows Update. If Windows Update is enabled (as described in step method 2 here under the section to "Configure Windows Update to"...) you may be able to just connect the USB cable and have the driver properly install. If not do the following: click on the Start Orb, Devices and Printers, Add a Printer, then select the appropriate port. When the list of printers comes up click on Windows Update. It will take several minutes for the list to repopulate, once this is complete the Laserjet 4 series printers will be available under HP (not Hewlett-Packard).
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Print error on HP LaserJet 4 Plus

     I have a Macbook Air, Mac OS X 10.6.8 and have installed my old trusty Laserjet 4 Plus printer. It printed once, then gave me an error, "W2 INVALID PERS"
and won't print again. I am told I do not need to download another driver, the Air has what is necessary
     I have tried the Generic PCL Laser printer driver as well as the HP driver and neither work. I looked on the HP site and there is nothing available for this printer, only the Laserjet 4 Plus "M"
     I am using a USB to Parallel cable. In the printer queue everything seems to go to 4% then stop sending.
Even though all the sites say this will work with the Air, could it be that there is not enough Ram (or something) to make it work?
I am sooooo frustrated! It is an old printer but works fabulously for what I need AND I have lots of cartridges for it!
Any ideas would be appreciated!
   Thank you,
PS...if there is no hope, can you recommend a printer that doesn't gobble up ink?

"W2 INVALID PERS" translates to 'Invalid Personality' - it occurs when you're trying to send a PostScript-formatted print file to an HP printer than only recognizes HP-PCL.
http://h30499.www3.hp.com/t5/Printers-LaserJet/LaserJet-4P-Message-quot-W2-Inval id-Pers-quot/td-p/962261

I cant print hp laserjet 1020 plus in domain conttroler system

hi
i have problem with hp laserjet 1020 plus printer i cant got print in doamin network.

Hi dara_sham,
Follow the steps in the document at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00381599&tmp_task=useCategory&cc=us&dlc=en&lang...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Need driver for HP Laserjet 4 Plus

LaserJet 4 Plus, Windows 8, but Customer support says Windows 7 works. I have just upgraded from Vista to Windows 8 and have been unabvlke to find a driver for this workhorse printer. I can't believe that HP wants me to stop spending 132.99 on toner replacement and has stopped supporting. Saw previous post for Windows 7 but when I use Windows Update on my 2 day old Windows 8 Pavilionit hangs up the sytem for 2 hours. Finally had to 3 finger salute and still no listing for driver. Can anyone help? I hate to dump this reliable, and ecomomic HP printer. Best purchase ever when it was supported.

I'm in a similar position. LaserJet 4 Plus and Windows 8.
Bullshark, the driver for LaserJet 4 Plus *is* listed. You first have to click "Windows Update" (screenshot 1) during the 'Add Printer' process. The list repopulates and will THEN include LaserJet 4 Plus (screenshot 2).
Will you let me know if that works out successfully for you?
My issue happens after that. I get a "Driver was not Install" error message

HP 4 plus printer

I own an HP LaserJet 4 Plus printer and want to use it with my new iMac. I need to find a cable to go from the HP's parallel port to the iMac's USB port. What cable will work the best for me?

The Laserjet 4 Plus driver is supplied through Windows Update for Windows 7. You can do the following: click Start, Devices and Printers, Add a Printer, select the correct port, Next, then select Windows Update, then select HP as the manufacturer and select the Laserjet 4 Plus.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Laserjet 4M Plus (C2039A) prints blank pages after cleaning?

I have a Laserjet 4M Plus (C2039A) that was working well. I was getting toner streaks so I disassembled the covers and cleaned dust and toner out. Cleaned plastic and plates with soapy sponge, cleaned rollers with alcohol, brushed and used air to clean dust. I'm good with mechanical projects. After re-assembling, I print blank pages. The menus, display, and computer interface seem fine. Paper feeds correctly. Self Test displays no errors, but I am unable to read printed test results or settings. I went into Service Mode, and ran Self Test there. I'm ready to disassemble it again, but do not know where to look for improper fit. What would prevent any characters from being printed? I'm using Windows XP drivers, and parallel port cable.

Hello kbright,
Welcome to the HP Consumer printer Forums.
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Little horizontal lines at the left side of the page, printed on the HP Laserjet 4 plus?

Folks, It seems that when I print to my HP laserjet 4 plus, I see some tiny horizontal lines on the left side of the printed page, spaced 4-5 inches apart, all at the very furthest left side of the page. Is this something that I can turn off? Are they some sort of binding marks? I am printing to this printer via jet direct card, over TCP/IP, from a Windows 7 64 bit PC. I love this printer, and recently changed out the exit assembly rollers, and now works like it was new. I also have a 500 sheet drawer and a duplexer installed on it, and I would like to figure out how to get rid of those little horizontal tick marks that show up on the left side of the page. Any help or assistance is GREATLY appreciated, Thanks so much in advance!

Hello @MattDillon , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Laserjet 4/4m Plus Printer

I have been having problems with the subject printer since installing Windows 7 on my HP Pavilion system. I have another printer (HP 8500 Officjet) that works fine. The Laserjet printer is attached via a USB parallel adapter. When I began having problems printing documents, I disconnected the Laserjet printer and turned it off. I, then, tried to remove the printer from the 'Devices and Printers' window. The system seems to remove the printer, but when I come back to 'Devices and Printers' , the Laserjet printer appears as if I did not remove it. When I looked in the 'Device Manager' , the 8500 Officejet printer shows up but the Laserjet printer does not.
The reason I want to remove the Laserjet printer is to get a fresh install of the software drivers for the printer. I would appreciate any help. Thank you.

Hi - I have an HP 5M printer, but it sounds very similar to the problems I was having when I first upgraded to Snow Leopard last week, so I'll tell you what worked for me.
My HP 5M was originally connected in OS 10.5 using AppleTalk. Now that that is gone, you need to enable TCP/IP on your printer instead of AppleTalk for network printing.
On your Mac, go to system preferences, network settings, and get the I.P. for that machine. It is probably 192.168.1.xxx.
Pick a number between 2 and 254 and use that for the last number in the I.P.
I used picked the number 20, so for my example above, I would use 192.168.1.20.
On the front of your printer panel somewhere there is a menu you can scroll through. (HP MI0 Menu)
My settings are as follows:
Novell: OFF
DLC/LLC: OFF
TCP/IP: ON (this is the important one)
ETALK: ON
Then it will ask you if you want to configure TCP/IP, which you do want to do. Settings for that:
BOOTP: NO
IP BYTE: 1=192
IP BYTE: 2=168
IP BYTE: 3=0
IP BYTE: 4=20
(As you can see from the numbers in the 4 IP BYTE listings, they correspond to the IP address numbers of whatever your router is, with the last digit being the "new" number you picked to access your printer).
There are other menu settings on your printer in that same setting location (SM BYTE, etc), all which are 0 and you don't need to alter them at all.
Then go to your System Preferences, Print & Fax, click the + to add printer, click IP, Protocol: HP Jetdirect, then type in the IP address that you specified on your printer (192.168.1.20) and click Add. You may have to specify your printer in the "Print Using" space if it doesn't automatically assign you as Laserjet 4M Plus.
Let me know how you make out. It can be frustrating if you've never had to do it before, I know it was for me.
Blair

LaserJet 4 plus printer/windows 10

Similar Messages

Maybe you are looking for