Laserjet 400 pro m401n language display

A mistake was made during installation and we can not figure out how to get the display back to English. I have looked at the online manual but can't find how to change the printer display language.

Hi thank you for answering. I do not have a gear and wrench icon. I have a friend that is a computer wizard, and he agrees there is no wrench or gear icon. He has figured out a simple way to correct the problem and for any one else i am listing the steps. I run XP Pro, and have a HP LaserJet Pro 400 M401n: HOw to change language for HP LaserJet Pro 400 M401n:
1. click start, click All Programs.
2. search the list for HP. as you highlight HP, to the right opens another menu that shows your printer, HP LaserJetPro 400
3. highlight the printer name, and that opens another menu with HP Device Toolbox. click Hp Device Toolbox
4. a page opens.
5. Click System along the top. that opens a drop down menu. click System Setup. Search that page and in the middle is "language" and select English. click apply and your done.

Similar Messages

ADF problems with HP Laserjet 400 Pro MPF475dn

Our printer doesn't take the paper when it is put in the ADF, sometimes it does take the paper (about 1 of the 10 times) but mostly it jus refuses to pick up the paper.
How can we resolve this problem?
We allready updated the firmware to the newest version, cleaned the rolls, but nothing seems te help.
Who can help us out?
Lebotec
This question was solved.
View Solution.

Hello @Lebotec , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Does the HP LaserJet Pro 400 Printer M401n (CZ195A) work with Linux?

Does the HP LaserJet Pro 400 Printer M401n (CZ195A) work with Linux?
Thank you for your help.
James Adrian
{Personal Information Removed}

Hello happy321,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Laserjet Pro 400 color M451dw vs HP laserjet Color Pro MFP M277dw

Dear,
Could you tell me what the main difference is between to printers. At this moment I use the Laserjet Pro 400 M451dw but I am very interested in the new Laserjet Color Pro MFP M277dw because you have the copy/scan utlility on this printer. Kind regards.

@ammarch
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HP LaserJet 400 Color MFP M475dw Problems in OS 10.9.4

I'm using a 2013 MacBook Pro, 2.4 GHz Intel Core i7, 9 GB 1600 MHz DDR3. I connect via wifi to the referenced printer (for almost a year now). Since updating to OS 10.9.4 I am able to print only one document at a time. Attempting to print a second document generates the message "Printer is not connected." If I turn the printer off and back on again, I'm able to print one document. Then the same thing occurs again. I have done the following so far, all to no avail:
Downloaded and installed latest driver (specifically for Mavericks) from HP
Checked for Apple software updates and found none
Reset the printing system (per instructions elsewhere in these forums)
I updated to OS 10.9.4 on July 5th and that is when this problem started. Where do I go from here???

And BTW, here's a repost of what I posted on July 7th:
I'm running a 2013 Macbook Pro, 2.4 GHz Intel Core i7, 8 GB 1600 MHz DDR3, OS version 10.9.4 (updated to this OS version 5 days ago, on July 2nd). For a little less than a year I've been printing to a HP LaserJet 400 Color MFP M475dw via wireless connection. A few weeks ago I began to have numerous "printer is not connected" events, and it reached the point I could not print anything - from my MacBook, my iPad Air, or my iPhone 5S. I discovered there was an updated printer driver on HP's website, specifically for OS 10.9. Downloaded and installed it, and the problem was seemingly solved.
Then I updated the OS to 10.9.4. AARRRRGH!!!!!! For the last 5 days, the printer will - sometimes - print the first document in a queue of 2 or more and then, while the printer is still "running," tell me the printer is not connected. I turn the printer off and back on, get one print job, then have to repeat the process. Here are all the things I've tried to resolve the issue:
Verified settings on the printer to make sure everything is set up properly
Restarted Airport Extreme, printer, and MacBook (multiple times) -- clarification: I turned off both the MacBook and the printer, then unplugged Airport for a few minutes, replugged it, restarted the printer, then restarted the MacBook
Reset the printing system (as suggested elsewhere in the Support forums), which basically removes all printers from the MacBook, then lets you add back those that you want - presumably with the most current driver(s).
Searched help/support forums on Apple, HP, and the internet in general
Found a firmware update for the printer on HP's website -- but it is not compatible with OS 10.9 (only goes up through 10.8). I downloaded it and tried, even though 10.9 was not listed, and the "app" wouldn't even open.
All of these efforts have been to no avail. The problem persists, and I'm at my wit's end how to solve it. HELP, please..........anyone??????

Cannot print to HP LaserJet 400 colorMFP M475dw after updating OS

I'm running a 2013 Macbook Pro, 2.4 GHz Intel Core i7, 8 GB 1600 MHz DDR3, OS version 10.9.4 (updated to this OS version 5 days ago, on July 2nd). For a little less than a year I've been printing to a HP LaserJet 400 Color MFP M475dw via wireless connection. A few weeks ago I began to have numerous "printer is not connected" events, and it reached the point I could not print anything - from my MacBook, my iPad Air, or my iPhone 5S. I discovered there was an updated printer driver on HP's website, specifically for OS 10.9. Downloaded and installed it, and the problem was seemingly solved.
Then I updated the OS to 10.9.4. AARRRRGH!!!!!! For the last 5 days, the printer will - sometimes - print the first document in a queue of 2 or more and then, while the printer is still "running," tell me the printer is not connected. I turn the printer off and back on, get one print job, then have to repeat the process. Here are all the things I've tried to resolve the issue:
Verified settings on the printer to make sure everything is set up properly
Restarted Airport Extreme, printer, and MacBook (multiple times) -- clarification: I turned off both the MacBook and the printer, then unplugged Airport for a few minutes, replugged it, restarted the printer, then restarted the MacBook
Reset the printing system (as suggested elsewhere in the Support forums), which basically removes all printers from the MacBook, then lets you add back those that you want - presumably with the most current driver(s).
Searched help/support forums on Apple, HP, and the internet in general
Found a firmware update for the printer on HP's website -- but it is not compatible with OS 10.9 (only goes up through 10.8). I downloaded it and tried, even though 10.9 was not listed, and the "app" wouldn't even open.
All of these efforts have been to no avail. The problem persists, and I'm at my wit's end how to solve it. HELP, please..........anyone??????

I also wanted to know if a HP M575f MFP is able to scan-to-email to MS Office 365 before buying the printer.
Because I didnt find reliable information in the internet, I contacted HP Germany.
Today they told me that HP printers don't support Office 365. The original wording was:
'Allerdings wird Office 365 nicht von unseren HP Druckern unterstützt.'
So far my present knowledge.

LaserJet 400 MFP Won't scan - "Device is Busy"

My HP LaserJet 400 MFP refuses to scan either to the network folder I set up, or to a USB drive. It simply displays the message "Device is Busy". I have tried restarting the device, and removing hte network cable, but it continues to display this message. There is nothing in the print queue that I know of. Please help!

I have a problem with my scan to folder as well and I have to access the folder from a computer before it will work. I'm not sure why that works, actually. You might want to give that a try to see if it fixes the problem. If it does, I imagine it is some sort of security problem with the folder you are trying to scan to.
Thanks,
Tiffany
I am an HP employee!

Fax over the network with HP LaserJet 400 ColorMFP M475dw

Hi there, I was trying to send fax over the network with HP LaserJet 400 ColorMFP M475dw, I have connected the printer/scan/fax on a wired network, just have 3 computers on it, all of them can scan or print. But I can't find any option to just FAX from Microsoft Word or Adobe Acrobat Reader, going to File ---> Print ---> and select M475dw "FAx", I installed the lasted version of the drivers downloaded from hp.com and there's no way to install this multifunction printer as a FAX.
So I can't see the FAX on Printers in the control panel of windows.
I have never got an error message from any computer during the installation process either.
Does anyone has an idea of what to do here?
Thanks ahead.

Thanks for your quick answer, I really appreciate it. But unfortunately, it didn't resolve my problem
Actually any of the workstations after complete the installation (with the last version of drivers downloaded just now from hp.com) can't recognize the HP LaserJet Pro 400 Color MFP M475dw, as a fax. I can print and scan over the network, or connecting the printer with a usb cable. I just can't see the icon "HP LaserJet Pro 400 Color MFP M475dw FAX" in Control Panel ---> Devices and Printers. I did a full installation when I were asked during the installation process... I did then I custom installation and neither of them seems to work to me
This is very strange, it never happened to me with any other models of all-in-on (printer/fax/scanner)

Where can I find a 10.5.8 driver for Laserjet 400 m401dne printer?

I'm running OS 10.5.8 on a G5 desktop (tower), and I just bought a LaserJet Pro 400 M401dne and connected it to this Mac with a usb cable. The Mac will print to it using a generic postscript driver automatically chosen by the OS. There is no driver for the LaserJet 400 on the list of drivers available in the OS.
The installer disk for the printer doesn't offer any driver installation for 10.5.8. It just says that the DVD software won't work with this version of the Mac OS.
This printer is capable of doing duplex (double-sided) printing, which is the main reason I bought this printer, but I am not given that option in any of the dialogue boxes for the printer when I hit PRINT. Apparently the generic postscript driver doesn't recognize the duplex printing feature of the printer. As a result I cannot print on both sides of a page.
I went to the HP website and could not find a LaserJet 400 driver for OS 10.5, nor do I see any driver for it on the Apple website. The free Gutenprint driver utility lists many LaserJet models, but not the 400.
Does anyone know where I might find a driver for this LaserJet 400 that will enable it to do double-sided printing in OS 10.5.8?
Tom

You solved the problem, BDAqua! I downloaded the driver for the LaserJet 500 from the HP website, as you suggested, and I found that it runs my LaserJet 400! And now I have the double-sided printing capability that I wanted. I just now printed out some double-sided pages to prove it.
I never even considered that a driver for a different HP printer might run this one, but it does. It offers options for printing color that this printer does not have, since the HP 400 is only a black-and-white (or grayscale) printer, and the driver thinks it is running a color printer, but I can simply ignore those.
So the HP Color LaserJet 500 driver for OS 10.5.8 is able to run the HP LaserJet 400 monochrome printer. Whodathunk!
Other HP LaserJet 400 owners running 10.5.8 take note!
Thank-you very much BDAqua!
Tom

IPv4 Gateway Issue? - HP LaserJet 400 M401dn / 400 MFP M425dn

Hello,
I work in healthcare and in our environment we have mostly HP LaserJet printers. Within the last 6 - 12 months we have started using some HP LaserJet 400 M401dn and HP LaserJet 400 MFP M425dn printers. They all have been updated with the latest firmware (20 printers) and connect to the network via ethernet using IPv4. We are having an issue when trying to print to them from a specific application. It's only happening on these particular models. All other HP LaserJet printers DO NOT have this problem (HP LaserJet 2015dn, 2055dn, P4015dn, 600 M602dn). The application is a telnet client using SSL that connects to a server. This server is on a different subnet (128.1.x.x) than the printers (10.92.x.x) that the clients print to.
It is possible to 'ping' the printer within the application using the printer hostname or IP address. The problem is, there are times when the printer status says 'Ready', and we can ping the printer from within the Windows operating system (Win7 Pro), but we cannot ping it via telnet SSL client. There is no response. The result is, we cannot print from the application to these printers. This problem isn't consistent either. There are times when it does work!
If we assign the printer to the same subnet as the application server, the issue appears to go away. Unfortuantely this is not a feasible permanent fix for us as the printers need to remain in their current subnet.
Sleep Mode is disabled on all of these printers. IPv4 settings are all correct and have been verified by various IT staff.
We believe there is an IPv4 gateway issue within the NICs on these printers. Has anyone ever had a similar issue? Are there any other additional details that I should provide which might help resolve this issue?
Regards.

To start off, the issue you are having may be caused by the softare you are using or the HP software. I am gonig ot to do some investigating to find out. I will want to to make sure that the softare is the most current version, follow the link below and reinstall if necessary (do not rely upon the CD-ROM):
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5096244&lang=en&cc=us...
Then if it is the same or you are still having issues I would recommend trying to use the PCL6 drivers for this. They offere a broader support to some of the more code specific programs :
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodTypeId=...
Run through that and let me know how it goes, I'll get right back in touch with you!
-Spencer
PS :: Can you print to this printer from other programs? Have a wonderful day!

HP LaserJet 400 color M451dw asking password to login

Hello,
I purchased HP LaserJet 400 color M451 dw. after two months all the menu of this device disabled and it is asking password to login. i have in a big trouble. can anyone please help me how to reset this. i attached you the print screen. Thanks:

As far as I'm aware, the LaserJet Pro 400 colour printer M451dn model does not support wireless connections; you'd need the M451dw model for that.

I want arabic and engilish keyboard in MacBook Pro with retina display how can i order that ??, i want arabic and engilish keyboard in MacBook Pro with retina display how can i order that ??

i want arabic and engilish keyboard in MacBook Pro with retina display how can i order that ??, i want arabic and engilish keyboard in MacBook Pro with retina display how can i order that ??

If you haven't found an answer yet. I know for a fact that this can be ordered directly from Apple at no extra cost
You can either ask for this when buying a new MBP at a "physical" Apple store, or as in my case in the UK the online Apple store allows such keyboard configuration in addition to 3 other languages like Spanish, German and French

My macbook pro with retina display

As a person that likes apple products like me i love the macbook pro with retina display, but there is one complaint that i have that i dont know how to fix. my macbook pro with retina display is getting to a point when it starts to overheat when i play graphically intense applications from the play store or off steam which has games as well. i dont know why this is that the macbook heats up i would like to fix this problem because i dont want this thing to start burning the internals and my computer starts to break itself because of heat problems. if anyone knows how to fix this problem please tell me i would like to know.

Welcome to Apple Support Communities
All PCs and Macs get hot while running heavy apps that require hardware work harder than with other tasks, so you shouldn't be worried about that.
However, if you feel that your computer doesn't turn on fans automatically when it gets hot, you may have a problem. Morever, this is a bigger problem in the MacBook Pro with Retina display, that has got less space to cool down your computer, getting higher temperatures.
If fans don't turn on, run Apple Hardware Test, holding Option (Alt) and D keys while your computer is starting. Connect the MacBook Pro to the charger, choose your language, mark the option to make extended test and start this. If at the end you see an error, copy it here and take your MacBook to an Apple Store.
If you don't get any error, you can use an application like smcFanControl to set up temperatures as you want. You shouldn't set up a speed higher than 2000 rpm if you don't want to damage your computer

Hp laserjet 400 mfp can't scan, i lost the installation cd

Hello,
i have a hp laserjet 400 mfp and i can't scan.
I have Windows 7 and the printer works just fine with the W7 software, but the scan option is not available, because the software installs only the printer, not the scanner.
I lost the installation cd and the installation software from hp support only install the printer , not the scanning option. Please help.
I also tried the e-mail scanning software from hp, but i don't know if it works , because i don;t know how to set the settings.
Thank you.

Hi, thank you for your answer. I tried with the full software you gave me in your link, but it was no good, because my printer is a Laserjet 4100 MFP, and the software was asking for an usb device, wich my printer is not...
I don't need the driver for the printer, i have that driver, but that driver sees the MFP like a simple printer, without scanner, so, the scanner remains usefull. I need the full software or the CD.
I don't receive an error, i just need the full software for Laserjet 4100 MFP. I didn't find it on HP's website, unfortunately and i don't have the installation CD anymore, cause i lost it....
Thank you.

How do I get the most out of my Macbook pro with retina display?

Hi,
I am new to apple had an Iphone and loved it and was drawn in by the advertisment for the new macbook pro with retina display and decided to get myself one. I have pretty much taught myself everything so far and I think I have a basic enough knowledge now of working my way round my mac and was wondering if anyone has any suggestions on how I can look to develop as I feel I have got all the gear but no idea!\
Any suggestions are greatly appreciated,
Cheers

http://www.apple.com/support/mac101/

Laserjet 400 pro m401n language display

Similar Messages

Maybe you are looking for