Laserjet 4650dn 13.09.00 Jam In Top Cover Error!!!!!!!!!!!!!

Anyone else see this error on their 4600/4650 series printer when trying to print a full page photo? If the photo has a lot of black it will jam every single time. If the photo is more magenta or cyan it will usually make it thru. I tried a different toner with no success.
I also removed the fuser expecting to clean it, but it appears spotless.
I also tried different papers.
Ideas?

You can check the error log history for the 13.09.00
A small amount I suppose is ok.

Similar Messages

HP LaserJet 4345mfp 13.20.00 jam in top cover area

hi.
i have HP 4345MFP and its showing an error (13.20.00 Jam in top cover area). i have cleared jam paper from the paper path areas and also checked the sensor possition all the sensors are in good position but still printer showing 13.20 paper jam error kindly help?

Check for something in the fuser area. Might want to remove the fuser and then re-seat it.
If so, try swapping the fuser with another 4345 (if available) and see if the problem follows the fuser.

My Laserjet Pro 400 will fax only the top on third of the fax page but I can receive full faxes.

My Laserjet Pro 400 will fax only the top on third of the fax page but I can receive full faxes. But the system works with my older HP Fax Printer. Thank you.

Hi @ 
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP Laserjet Pro 400 Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet Pro 400 Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Laserjet pro m1530 has black bar at top when copying

Laserjet pro m1530 has black bar at top when copying, scanning bar seems to stick and not reset at top. Turning copier off seems to reset the screen back to top but next copy has same problem. No problem when printing from computer.

Have you tried connecting the print to a different wall outlet or location?
if no please try it and if it doesnt resolve then contact HP Tech support on 1 800 474 6836 and they will asist you further.
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

My HP LaserJet 100 color MFP M175nw is getting a 52 error message

My HP LaserJet 100 color MFP M175nw is getting a 52 error message, how i can fix it ?

Hi @pipou716 ,
I'd like to help you resolve the 52 error message today.
Does the error also have the word scanner in it?
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. Software & Drivers.
Restart the printer after the firmware is updated.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Issue with MacBook Pro top cover

The top cover of my MBP; brought in Sept 2012, flips open when kept in a verticla position. Like when you place it in a laptop bag. The local Apple service center was not of much help. Have attached a snap of the MBP in the vertical position showing the top cover flip open. Can someone be of some help

We do not have an Apple Store near our place (Bangalore; India). We only have retail outlets of Apple which provides both sales and service. My visit to one of these places did not help as the service engineer did not acknowledge this as an out of specification.
Following this i wrote to Apple support, with a whole lot of videos and photos of the problems faced. Did not yield any concrete solutions. To me it appears to be a failure of the magnetic "lock" which holds the top cover in place. Pretty frustrating. Hope somone would help we resolve this issue.

My MacBook Pro top cover flips open partially when kept in a vertical position.

The top cover of my MBP; brought in Sept 2012, flips open when kept in a verticla position. Like when you place it in a laptop bag. The local Apple service center was not of much help. Have attached a snap of the MBP in the vertical position showing the top cover flip open. Can someone be of some help

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

How do I remove the top cover from my Toshiba satellite L305-S5875 laptop?

I already tried the instructions from irisvista.com but it doesnt help. i just need instructions on how to remove the top cover after removing the keyboard.
Thank You so much

Just guessing, if water is should dry in a day or two and not be a problem. Also, guessing, probably have to pull the side cover to get access to release the top.

Satellite A300D - Broken small strip on the underside of the top cover

When cleaning the cooling unit I broke a little cold strip running on the underside of the top cover near the power supply.
It does not seem to connect to anything.(i hadnt removed the2 screws in the battery area). It runs parallel to the stop/play/forward strip.
What is this strip for and would that prevent the power button from working??/

> It does not seem to connect to anything.(i hadnt removed the2 screws in the battery area). It runs parallel to the stop/play/forward strip.
I assume you are talking about a thin plastic cover above the keyboard button row F1-F12 this is a simple cover covering the screws securing this keyboard
Its really pity that you broke this cover but this should not affect the functionality
Of course you can purchase an replacement from a Toshiba service provider in your country.

Dv6-1375 top cover 15.6 inch screen

i have a broken top cover and left hinge for a dv6-1375 laptop. Can't find a replacement, and HP won't talk to me since it's out of warranty. Can't I buy parts direct from HP? Why can't I find that option on their website?

please check here: http://h20141.www2.hp.com/hpparts/partsdirectory/catalog_solutions_NA.htm

Laptop top cover unglued

The left hinge casing on my laptop came off and was lost, and the black, plastic case for the screen is cracked and seperates from the screen when closing and opening the laptop. If there is a fix, I need it to be done quickly (I will pay for expedited shipping). I'm not sure if I have a warrantee on the laptop, it was a gift. The laptop is an envy m6. Any help would be appreciated.i was thinking of using sum kind of adhesive to stick that top cover but then wanted sum pro suggestions frst

I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

M92p SFF top cover part numbr?

I did some damage to the top cover of my ThinkCentre M92p SFF (2988) and am trying to figure out the part number of that cover. The HMM doesn't list it, but a "System Service Parts" document lists this:
03T9979 Top cover asm. for Manhattan MECH ASM
I'm not sure what "Manhattan" means in this context. But is this likely to be the part I'm looking for? Thanks for any help.

Lenovo s510p touch top cover broken, top cover needed very urgently

i bought my lenovo ideapad s510p touch from usa in dec 2013, i only hav upgraded warranty.,
recently my laptop's TOP COVER has broken i need the part very urgently please any one can help meee please
LENOVO IDEAPAD S510P TOUCH TOP COVER ('a' COVER)
Link to picture/image
Link to picture/image
Link to picture/image
Link to picture/image
NEEDED VERY URGENTLY CAN ANYONE HELP ME PARTS ALSO NOT AVALIABLE SAID BY SERVICE CENTERS
Mod comment: Over sized pictures converted to links. Please see About-Posting-Pictures-In-The-Forums

Some posts have been removed.
Please do not post private information in these forums.
Andy
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество

LaserJet Pro MFP M127fw Scanner Jam - 2 printers now

I purchased a LaserJet Pro MFP M127fw earlier this year (February timeframe). Within a couple of months, the scanner feeder was pretty much always jamming at the second page. It eventually got to the point where it would jam at the first page. Prior to this, I had had no problems.
Because he expressed interest in it, I gave that printer to a friend. In April, I purchased the same brand of printer from the same store. All was well until several days ago when the scanner feeder started to jam on this printer - initially when the third page was being fed, and now the printer is doing it at the second page.
Both printers are connect via USB. My laptop is running Windows 8.1.
I've uninstalled and re-installed the drivers/software. I've attempted to run the HP Print and Scan Doctor but it repeatedly gets hung up and I have to close it from the Task Manager.
I called the store from which I bought the two printers and they suggested it might be a manufacturer defect.
Thoughts as to what may be happening?

Hello BFB101,
Welcome to the HP Forums!
I understand two Laserjet MFP M127fw that you bought, receive a paper jam in the automatic document feeder. I will do my best to assist you! Please make sure this printer is plugged into a direct wall, not a surge protector. I just want to see if this makes a difference.
I would follow this HP document on 'Original Jam: Clear jam, and then press OK' Message Displays on the All-in-One. Make sure there is no paper within the automatic document feeder since you keep experiencing this problem.
Try performing a hard reset on your printer for more than 60 seconds. Leave the printer turned on> Disconnect the power cord from the back of the printer.
The last step you can try is updating the Firmware on your printer. I will provide the HP website where this download is located here. Please choose your correct operating system.
If you're experiencing the same problem, then you will have to contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
Good luck.
I worked on behalf of HP.

Hp color laserjet 4650dn

I am trying to install my HP ColorJet 4650dn on my OSX Mac Version 10.8.5. I'm not seeing any drivers available for my OSX version. Any suggestions?

Hello,
It looks as if a driver for your printer might be available via Apple software update. Here is a support document that outlines what to do in your particular OS.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?sp4ts.oid=375...
Good luck!!
I work for HP, However, I am speaking for myself and not for HP

Laserjet 4650dn 13.09.00 Jam In Top Cover Error!!!!!​!!!!!!!!

Similar Messages

Maybe you are looking for

Laserjet 4650dn 13.09.00 Jam In Top Cover Error!!!!!!!!!!!!!