Laserjet 6P won't stop printing - prints a line of junk on each page -not connected to network or PC

My HP Laserjet 6P won't stop printing. It prints a few lines of symbols and characters at the top of each page. The printer is not connected to a network or computer. I tried shutting the printer off for a long time. This started when I tried printing from a MAC to the printer, but now there is nothing connected to the printer.
Any suggestions for resetting, etc.? I don't know how to reset this printer so I haven't tried anything with the various buttons, etc.

Disable the "Enable bidirectional support" in the P1102w Properties > Ports.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

Laserjet 1020 won't STOP duplex printing

I used to switch from single to double sided printing and back using the printer options / finishing / document option menu.
Now my printer only does duplex printing, even though the print on both sides option is unselected. I have removed and reinstalled printer driver with no change.
How can I get single sided printing back??

Hello,
Thanks for the post. This is an odd one, since you should have the manual duplex ability, but not fully auto. I've included a link below with some information on how to set this up. I might suggest that we try to reverse engineer this one and see we can resolve it that way. Also, another thought here, do you have or have you used another printer on this machine, we may have the incorrect driver selected.
Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00381797&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Error: EPrint not Enabled, Also: Printer not connected to Network

I have been using this printer and EFax until recently when EFax wont work. I am connected to Network, I can use printer for printing from laptop, IPAD and Iphone. Have good connection. When I attempt to send EFAX, I get "Your printer is not connected to Network" Then I am told to enable EPrint, IT IS enabled. Printer is great, EFax wont work.

This reply may be late for this user, but it might be helpful for any current users.
I managed to change the modem's IP address to match that of the printer. In my case the printer worked fine wirelessly until I moved to a new place and installed a new modem. Here is what I did to solve the problem:
1. At the printer, click on the wireless button, wireless settings, print network configuration page. This will print a page with the printer's IP address (in my case: 192.168.0.13)
2. I accessed my modem via the internet browser, typing 192.168.1.1 (this is one of the default addresses (192.168.0.1 is also common). Default user and password is admin (usually). There I changed the modem's IP address to 192.168.0.1 and the range to start at 192.168.0.13 (my printer's IP address).
3. I saved the settings (the modem will reboot and you will be offline, it may take some 20 seconds before the modem is visible again).
4. Reconnect to the modem and check if internet is still working. Then try to install the printer again.
This worked for me after I read several other postings.
Good luck!

HP Color LaserJet CP1520nw will not connect to network (time out repeatedly)

My HP LaserJet CP1520nw won't connet to my wireless router upon installation, no many how many times I've been asked to connect it to the computer via a USB printer cable. I uninstalled and reinstalled all software, and each time I try to set it up for wireless connectivity by connecting my computer and the printer via a USB printer cable, it gets to 99% installed on the progress bar and sits there until it times out. I suspect one of the follow but am open to other ideas from those more knowledgeable:
1. Is the printer locked onto some old, initial configuration from a previous wireless network that needs to be purged of addresses, etc. before it can accept the new ones?
2. Could my WPA WPA2 PSK AES encrytion be messing it up? Are the modern firmware and updates designed to accept these ? I never have gotten to a screen where it asks for my encyption key or even a WPS pass phrase. What to do if so?
3. Could Church Lady be correct and that it is Satan preventing the installation? If so, what icons does he use to watch out for and will my Norton anti-virus and malware quarantine him to Hell automatically or does it require manual enforcement?

Hi @Marvalina1968,
Welcome to the HP Forums!
I noticed that your HP Color LaserJet CP1520nw will not connect to network with Windows 7. I am sorry to hear this, but happy to help!
First to answer your questions:
It is possible the printer could be locked to an old configuration and needs to be reset.
I don't think your WPA WPA2 PSK AES encrytion could be messing it up, unless you got some really strange characters in your password.
Your Norton antivirus, could possible be causing the installation to fail.
Please take a look through the following guides:
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
Printer Does Not Maintain Wireless Connection.
If the guides do not resolve the issue, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Disable antivirus software.
Disable any firewall programs. Turn Windows Firewall on or off.
Re-install the software. HP LaserJet Full Feature Software and Driver.
Hope this solves your problem, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Laserjet P1102w won't stop printing

I've just installed an HP Laserjet P1102w from the disk and it won't stop printing. I've disabled the bidirectional support and gotten rid of all other HP devices on my laptop but it still keeps going - just printing blank page after blank page. How can I stop this?

Hi @dionysusthewino ,
I see that the printer is printing out blank pages and won't stop. I would be happy to help you.
Clear out the print queue on the computer.
Then power cycle the printer.
Restore the printer back to factory settings, if you are still having issues. If the printer is networked though, you will have to set it up again.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
If you need further assistance, please provide the results and the following information.
What operating system are you using?
How to Find the Windows Edition and Version on Your Computer.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

OfficejetPro 8000 won't stop cleaning, printing test pages

Every time just after we print, our Officejet Pro 8000 A809 prints a test page, then starts cleaning and nothing can be printed again for several minutes. The test page can be canceled, but not the cleaning cycle. If we add several documents to the print queue quickly, it will print those documents, but always the test page and cleaning cycle afterwards. The cleaning cycle seems to be using a lot of ink. The page it's printing has CMYK stripes down each side and bars running down the middle, some slanted.
I've tried resetting the printer by unplugging it, the queue doesn't show any errors, and neither does the HP "Solution" Center.
Thanks for any help.

Just a quick update as HP seem completely incapable of answering threads here, offering advice (tried their woeful helpline which just reiterated advice I'd already read in the manual), or helping their customers at all. I've returned the printer to the supplier, as it was completely intolerable, after 3 days of its cleaning process (twice taking over 15 minutes) it refused to print half the colours, and after yet more cleaning it exhausted the inks – it I hadn't paid for the device, I'd have laughed... To market and sell this device as a small workgroup printer is ridiculous, it doesn't even properly function as a printer at all. We've been purchasing HP devices since the 550C way back in the early 1990s, but will never purchase a printer from HP again. Slowly but surely the devices have become cheaper, poorly built, with the focus on tiny ink cartridges to fleece the customer. I'm absolutely disgusted with the lack of assistance, support, let alone the truly abysmal device which is/was the 8000.

Deploying Printer to XP and Win 7 environment before it is connected to network

I have a client that is getting 4 new office printers that will be replacing their leased printers.
The third party company will come in, take away the old printers and set up the new printers. By set up, I mean they will connect the network cable, power it on, program the IP address I give them and take off. I need to pr-stage these printers so that users
will be able to print as soon as the new printers are powered on. There are a lot of users depending on these printers to work with little downtime as possible. This is a 24/7 operation unfortunately. So, it is a server 2008 R2 / Windows XP / Windows 7 domain
environment.
I am really getting close to the deadline of new printers arriving so I will walk through exact
steps I have taken to get this set up.
Ok. I have a server running 2008 R2. I added the Print services role.
Right click 'Printers' -> Add printer
select 'Add a TCP/IP Printer by IP address or hostname'
'Type of device' = 'Autodetect'
'hostname or IP address' = 'x.x.x.x' (IP address that printer will be set to)
'Port name' = 'x.x.x.x_2'
do NOT select 'auto detect printer driver'
select 'Generic Network Card'
select 'Install new driver'
select 'Have Disk' and browse to driver
'Printer name' = Printer Name
select 'share this printer'
'Share name' = Printer Name
next, next, driver installs and printer installs, and finish.
Now you have the printer installed and showing up under printers.
Now, I right click printer and -> deploy with group policy
Browse to the OU where users are located in ADUC, select the GPO that I have linked to that OU, select 'apply to users' click 'add' and click 'OK'.
The GPO adds a setting:
User Config -> Policies -> Windows Settings -> Printer Connections -> Path -> \\Server\Printer
Now, I log in to a win 7 computer, gpupdate, printer shows up in devices and printers. I can't print to it obviously since it's not connected to the network yet. But, when I log in to an XP computer, run gpupdate, it does NOT populate in devices and printers.
When I run gpresult the policy is applied, but the printer is not showing up in devices and printers. Also,
I can search for the printer and install it that way since I chose 'list in directory' from the printer server so I know the driver is correct.
What am I doing wrong?
Thank you in advance.

From the previous description, are you using Deployed Printers? If yes, you need to run pushprinterconnections.exe on XP. You can find a 32bit binary in \windows\system32 on a 32bit version of Windows 7 With SP1.
Alan Morris Windows Printing Team
One more question Alan, how can I set these printers I have deployed as the default for the users?

Photosmart printer will not connect to network, unable to set IP Address Manually

My Photosmart printer has worked fine for a long time but it now refuses to connect to the network. It is wired into the router and I have changed the lead and this shows no chnage. The Printer network set-up shows an IP address of 0.0.0.0 in manual mode and if I reset this and press OK it immediately reverts to 0.0.0.0. I've also tried putting the printer into Automatic IP address but it still fails. Subnet Mask and Default Gateway also show as 0.0.0.0. I can reset the Subnet Mask and Gateway to the correct levels but as soon as I go back to set the IP address they revert to 0.0.0.0. The printer will work from a USB connection but it will then not share correctly. Is it possible to reboot the onboard program?

Oh, an ISP-supplied router. Uggh.
OK, remove the phone (DSL) cord from the back of the router. Cycle power on the router, then attach the printer with the phone cord disconnected.
Now, Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to print from iPad not connected to network?

I'm building an HTML5 app packaged with Cordova, and I have a requirement to print from the app when the device (iPad 2, wifi only) is disconnected from a network.
As I understand things, I can't use an AirPort printer because that would require a subnet (i.e. a wifi connection).
The only other option I can think of is a bluetooth printer - but there don't appear to be (m)any options to integrate via Cordova without writing my own plugins... and I'm not a ObjC developer.
Can anyone think of creative options?

This is a topic that might best be posted to the developers forum.
I would have to agree with Steven, however, I have never heard of an app that is able to access print services via bluetooth from an iOs device. Not saying it is not possible, but you would need a printer capable of accepting the signal via bluetooth as well. I suspect niether is a trivial problem to solve.

Printer making a terrible grinding noise after each page printed

My new HP Officejet 4620 is making a grinding sound after each page printed. I have checked to make sure all packaging material have been removed. Anyone else having this issue?

Could still have something stuck in the printer, I would follow the steps in the link below, and if that doesn't work - call HP as the printer is so new.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03136324&tmp_task=solveCategory&cc=us&dlc=en&lc...
http://welcome.hp.com/country/w1/en/support.html
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

LaserJet M1217nfw won't do wireless printing from iMac 10.7.5 after HP firmware update

My LaserJet M1217 worked perfectly until I did the recent firmware update. Now it's a brick. I called tech support, was on hold for nearly an hour, got offshore folks who kept me on even longer with marketing hoo-hah, and finally told me that the mfp was no longer under warranty and they wouldn't help unless I paid. I explained that the problem was caused by HP's own firmware update, but no dice. Tried a tweet to HP - also no luck. Tried again, had a nearly two-hour hold, couldn't understand the guy. Wasn't about to pay when the help was incomprehensible. So now I have a brick. And clients waiting. And a grudge.
I tried the fix suggested earlier in the forum - holding down the x and the right arrow while powering up. The printer showed ready...and made copies, but when I tried to print I still got printer errors saying the printer isn't connected to the computer.
So I went to system preferences and deleted the HP M1217, then went online and downloaded the HP driver again. Opened it up, but now during setup it wants the network address or network name for the desired printer. And I have no idea. I tried going on Safari and entering localhost:631/printers, but since the HP still isn't in the system, it doesn't show up. And maybe this wasn't even the right thing to try, but I'm getting no help from HP, and I'm not very technical. Argh.
Any thoughts? Or should I just chuck what was a wonderful device and never buy anything from HP again.
Thank you!!!

Hello SC_W,
The IP address can be fixed by going to Setup > Network Config > TCP/IP Config from the printer front panel.
Then select Manual and set the IP as manual.. I would using an higher value to avoid IP conflicts (e.g. if the current IP is 10.0.0.1, change only the last part to 10.0.0.20 so the address will remain and won't be used by other devices when the printer is powered off.)
Although I personally doubt it will help assigning a fixed IP as Mac OS X uses Bonjour hostname to communicate with the printer (which is fixed) and not athe IP address as Windows uses.
Additionally, as Apple products uses Bonjour, I could see some discussions on this matter for the Home Hub 3.0.
Below is an example:
https://community.bt.com/t5/Other-BB-Queries/HomeHub-3-Apple-Bonjour-not-working-for-AirPlay-AirPrin...
If setting a fixed IP does not help, try the folowing to isolate the problem and ensure if Multicast packets transfer may cause the issue:
From your Mac go to System Preferences > Print & Scan, click the Plus sign and then click the IP tab.
Select the HP Jetdirect Socket protocol and type the IP as the address value.
Add the printer, you will see an additional print queue listed as the IP address.
Keep using this queue for printing and let me know if you may se any difference for this print queue..
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HT4356 Frontier installed Super Fios and I cannot print from iPad to my airprinter as it will not connect to same network now Any suggestions

My Internet was changed to Fios and Frontier installed a new router with different Essig and wep key. How do I connect my air printer to wifi. My iPad is using same SSID AND PASSWORD AND CONNECTS TO NEW ROUTER BUT NOT MY PRINTER. EPSON ASKS FOR VALUE. NOT SURE WHAT IS TO BE ENTERED FOR THAT. TRIED WEP KEY. ESSIG NO AND. PASSWORD USED FOR WIFI NAME ON IPAD. NO LUCK.
MHAS ANYONE HAD TROUBLE WHEN UPGRADING WITH FRONTIER HIGH SPEED INTERNET. CAN FRONTIER GIVE ME THE NEW SSIG AND PASSWORD

Uwdawgfan-
Your new router may not correctly handle Bonjour data required by AirPrint. Contact Frontier to correct the router's setup. A firmware update may be required.
Fred

How do I print a PDF that contains mixed paper sizes (letter and legal) so that my printer choosing the correct paper tray for each page?

I have followed the instructions here:
Print mixed page sizes | Acrobat, Reader
But it did not work! I'm using a Mac OSX 10.9.3, Reader 10.1.10

I found out that, apparently, this just plan doesn't work on the Mac version of Adobe Reader. Thanks, Adobe, for a crappy experience.

I got all the way to the settings to find my printer's email address and it says it's not connected

officejet 6500A - Windows Vista I think - setting up my EPrint and tried to find my printer's email address and it says "the printer was unable to cnnect to the server"

Hello cstace22,
I would try power cycling the printer to start with resolving your connection issue. While the printer is still on, unplug the power cord from the printer, leave it unplugged for 30 seconds, then reconnect the power cord to the printer. Once plugged back in the printer should power on automatically.
If you are still experiencing issues after this has been done then you may want to try restoring your network defaults and then reconnecting to your wireless network.
Hope this helps.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to print a value at the top of each page in the detail section of a rpt

Thanks for helping, I will try to get right to the point.
I have RTF template. Very simplistic template. I have the Group at the top (there is only 1 per XML file) and several DETAIL lines with like 10 columns.
The first displayed field is "ACCOUNT_NUMBER". The user wished that if the ACCOUNT NUMBER for line 2 was the same as line 1, that it be suppressed, for example:
Acct No other other other other
1234 XX XX XX XX
YY YY YY YY
This was not a problem, I was able to accomplish it with the following code:
<?if:position()=1 or ACCOUNT_NUMBER!=preceding::ACCOUNT_NUMBER[1]?><?ACCOUNT_NUMBER?><?end if?>
But what happens is that IF THE FIRST line on a page has the same ACCOUNT_NUMBER as the last line on the previous page, the ACCOUNT NUMBER is not displayed.
What I would like is for the ACCOUNT NUMBER to be displayed anytime we are at the first record on a page, AND anytime it is different from the previous record's value.
I do not know how many lines per page are possible, because there are other line breaks which exist which put a space between lines when values change too. So I cannot just count how many total lines and divide it by lines per page.
My thought was that there must be a way I could store a variable called LAST_PAGE, and at the end of each record, copy the current page number to that variable. Then in my ACCOUNT_NUMBER code, I could check if current page is NOT equal to last page along with my other conditions.
1. Is this the best way to do this? If so, please help, I am new to BI and am having trouble figuring out where to put variables and stuff like that.
2. If not, how can I do this?
3. If your recommendation is going to be to group my items by Account Number, I may not have time to redo the report that way. I will happily supply the rtf and xml if that will help you help me.
Regards:
Michael Coughlin

Here ya go. Obviously you can duplicate the G_DETAILS blocks to get enough for 2 pages. I have the data pre-sorted before the output is generated because I had trouble getting the RTF to work if I didn't, just so you know.
<?xml version="1.0" encoding="UTF-8" ?>

<XXDIPICK_RPT>
<LIST_G_HEADERS>
<G_HEADERS>
<SHIP_FROM_ORG_CODE>202</SHIP_FROM_ORG_CODE>
<LINE_STATUS>Picked</LINE_STATUS>
<LIST_G_DETAILS>
<G_DETAILS>
<SHIP_FROM_ORG_CODE1>202</SHIP_FROM_ORG_CODE1>
<ACCOUNT_NUMBER>1000</ACCOUNT_NUMBER>
<DELIVERY_NUMBER>8062</DELIVERY_NUMBER>
<ORDER_NUMBER>103049</ORDER_NUMBER>
<CUST_NAME>DIAMOND INNOVATIONS INT SALES - NEWCO</CUST_NAME>
<DELIVERY_DETAIL_ID>12474</DELIVERY_DETAIL_ID>
<LINE_NO>1.1</LINE_NO>
<ITEM_NO>4087401</ITEM_NO>
<ITEM_DESCRIPTION>HPD M SD-CTO-0 Pot</ITEM_DESCRIPTION>
<OPEN_FLAG>Y</OPEN_FLAG>
<CANCELLED_FLAG>N</CANCELLED_FLAG>
<BOOKED_FLAG>Y</BOOKED_FLAG>
<ORDERED_QUANTITY>1</ORDERED_QUANTITY>
<ORDER_QUANTITY_UOM>EA</ORDER_QUANTITY_UOM>
<SHIPPED_QUANTITY></SHIPPED_QUANTITY>
<SCHEDULE_SHIP_DATE>2011-01-31T23:59:00+00:00</SCHEDULE_SHIP_DATE>
<NAME>INTERNAL ORDER - US</NAME>
<CUST_ACCOUNT_ID>16404</CUST_ACCOUNT_ID>
<HEADER_ID>6446</HEADER_ID>
<LINE_ID>7926</LINE_ID>
<ORG_ID>84</ORG_ID>
<SHIP_TO_ORG_ID>16050</SHIP_TO_ORG_ID>
<INVOICE_TO_ORG_ID>16052</INVOICE_TO_ORG_ID>
<SHIP_SET_ID></SHIP_SET_ID>
<INVENTORY_ITEM_ID>63927</INVENTORY_ITEM_ID>
</G_DETAILS>
<G_DETAILS>
<SHIP_FROM_ORG_CODE1>202</SHIP_FROM_ORG_CODE1>
<ACCOUNT_NUMBER>1000</ACCOUNT_NUMBER>
<DELIVERY_NUMBER>8062</DELIVERY_NUMBER>
<ORDER_NUMBER>103049</ORDER_NUMBER>
<CUST_NAME>DIAMOND INNOVATIONS INT SALES - NEWCO</CUST_NAME>
<DELIVERY_DETAIL_ID>12475</DELIVERY_DETAIL_ID>
<LINE_NO>2.1</LINE_NO>
<ITEM_NO>3732307</ITEM_NO>
<ITEM_DESCRIPTION>NV MBS 2325 Bushing Asm</ITEM_DESCRIPTION>
<OPEN_FLAG>Y</OPEN_FLAG>
<CANCELLED_FLAG>N</CANCELLED_FLAG>
<BOOKED_FLAG>Y</BOOKED_FLAG>
<ORDERED_QUANTITY>1</ORDERED_QUANTITY>
<ORDER_QUANTITY_UOM>EA</ORDER_QUANTITY_UOM>
<SHIPPED_QUANTITY></SHIPPED_QUANTITY>
<SCHEDULE_SHIP_DATE>2011-01-31T23:59:00+00:00</SCHEDULE_SHIP_DATE>
<NAME>INTERNAL ORDER - US</NAME>
<CUST_ACCOUNT_ID>16404</CUST_ACCOUNT_ID>
<HEADER_ID>6446</HEADER_ID>
<LINE_ID>7927</LINE_ID>
<ORG_ID>84</ORG_ID>
<SHIP_TO_ORG_ID>16050</SHIP_TO_ORG_ID>
<INVOICE_TO_ORG_ID>16052</INVOICE_TO_ORG_ID>
<SHIP_SET_ID></SHIP_SET_ID>
<INVENTORY_ITEM_ID>67865</INVENTORY_ITEM_ID>
</G_DETAILS>
<G_DETAILS>
<SHIP_FROM_ORG_CODE1>202</SHIP_FROM_ORG_CODE1>
<ACCOUNT_NUMBER>46711</ACCOUNT_NUMBER>
<DELIVERY_NUMBER></DELIVERY_NUMBER>
<ORDER_NUMBER>102980</ORDER_NUMBER>
<CUST_NAME>VAREL EUROPE</CUST_NAME>
<DELIVERY_DETAIL_ID>12356</DELIVERY_DETAIL_ID>
<LINE_NO>1.1</LINE_NO>
<ITEM_NO>11004002</ITEM_NO>
<ITEM_DESCRIPTION>TYPE I 100/120 MISC</ITEM_DESCRIPTION>
<OPEN_FLAG>Y</OPEN_FLAG>
<CANCELLED_FLAG>N</CANCELLED_FLAG>
<BOOKED_FLAG>Y</BOOKED_FLAG>
<ORDERED_QUANTITY>75</ORDERED_QUANTITY>
<ORDER_QUANTITY_UOM>CT</ORDER_QUANTITY_UOM>
<SHIPPED_QUANTITY></SHIPPED_QUANTITY>
<SCHEDULE_SHIP_DATE>2011-01-27T23:59:00+00:00</SCHEDULE_SHIP_DATE>
<NAME>STANDARD ORDER - IRE</NAME>
<CUST_ACCOUNT_ID>5004</CUST_ACCOUNT_ID>
<HEADER_ID>6234</HEADER_ID>
<LINE_ID>7312</LINE_ID>
<ORG_ID>85</ORG_ID>
<SHIP_TO_ORG_ID>18929</SHIP_TO_ORG_ID>
<INVOICE_TO_ORG_ID>4995</INVOICE_TO_ORG_ID>
<SHIP_SET_ID></SHIP_SET_ID>
<INVENTORY_ITEM_ID>42032</INVENTORY_ITEM_ID>
</G_DETAILS>
<G_DETAILS>
<SHIP_FROM_ORG_CODE1>202</SHIP_FROM_ORG_CODE1>
<ACCOUNT_NUMBER>76127</ACCOUNT_NUMBER>
<DELIVERY_NUMBER>7608</DELIVERY_NUMBER>
<ORDER_NUMBER>102981</ORDER_NUMBER>
<CUST_NAME>LION ENGINEERING SERVICES LTD</CUST_NAME>
<DELIVERY_DETAIL_ID>12357</DELIVERY_DETAIL_ID>
<LINE_NO>1.1</LINE_NO>
<ITEM_NO>11004002</ITEM_NO>
<ITEM_DESCRIPTION>TYPE I 100/120 MISC</ITEM_DESCRIPTION>
<OPEN_FLAG>Y</OPEN_FLAG>
<CANCELLED_FLAG>N</CANCELLED_FLAG>
<BOOKED_FLAG>Y</BOOKED_FLAG>
<ORDERED_QUANTITY>200</ORDERED_QUANTITY>
<ORDER_QUANTITY_UOM>CT</ORDER_QUANTITY_UOM>
<SHIPPED_QUANTITY></SHIPPED_QUANTITY>
<SCHEDULE_SHIP_DATE>2011-01-27T23:59:00+00:00</SCHEDULE_SHIP_DATE>
<NAME>STANDARD ORDER - IRE</NAME>
<CUST_ACCOUNT_ID>5614</CUST_ACCOUNT_ID>
<HEADER_ID>6235</HEADER_ID>
<LINE_ID>7318</LINE_ID>
<ORG_ID>85</ORG_ID>
<SHIP_TO_ORG_ID>18429</SHIP_TO_ORG_ID>
<INVOICE_TO_ORG_ID>5605</INVOICE_TO_ORG_ID>
<SHIP_SET_ID></SHIP_SET_ID>
<INVENTORY_ITEM_ID>42032</INVENTORY_ITEM_ID>
</G_DETAILS>
</LIST_G_DETAILS>
</G_HEADERS>
</LIST_G_HEADERS>
</XXDIPICK_RPT>

Laserjet 6P won't stop printing - prints a line of junk on each page -not connected to network or PC

Similar Messages

Maybe you are looking for