LaserJet CP1525nw & WPA-enterprise

We bought a LaserJet CP1525nw printer because of its airprint support for printing from our iPads. Our wireless network uses WPA-enterprise security.
We are unable to connect the printer to the wireless due to the enterprise authentication. ipad is unable to find the printer.
We need printing from the iPads, ePrint does not offer. Any help would be much appreciated. Firmware 20110329.

Hello,
If you have not already, I might recommend going here and then looking at the link for iPad printing for ePrint/Airprint or ePrint Home and Biz. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Similar Messages

WPA enterprise airprint printers

Does anyone know of any airprint printers that support WPA enterprise authentication?

Try the HP LaserJet Pro 300 color MFP M375, 400 , 500 , 600.
Call HP first to make sure.

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

Problem getting Airprint (Bonjour) to communicate to HP LaserJet CP1525nw printer across a Cisco 5508 Wireless Controller

I cannot get my IPad2 to print (it cannot find the printer) using a Laserjet CP1525nw color printer across a wireless network using a Cisco 1508 Wireless Controller with 49 wireless access points. HELP!!!!
What is the secret to getting Bonjour to work on it?
I can get the IPad2 to locate the HP CP1525nw printer without a hitch using a low budget Netgear WAG102 stand alone wireless access point on the same network.

If it helps somebody, here is what you need to do.
It worked for me, but only in Multicast-Unicast mode.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0 080bb1d7c.shtml

Cannot enable ePrint/Web Services, HP LaserJet CP1525nw

I am trying to follow HP's instructions for enabling ePrint and Web Services for my LaserJet CP1525nw. I printed the Config Report, got the printer's IP address and entered it into a brower as instructed. It does pull up summary page, but there is no "HP Web Services" tab as indicated in all of the HP instructions I can find - only four tabs that read: Status, System, Print, Networking.
I have looked at all sub-menus under each of these tabs, and cannot find anything that even resembles a "Web Services" option.
Can somebody please help? Or is there another way to find the printer's email address so that I can register and use ePrint for my iPhone and iPad?
From what I have been able to find on HP Support, the Airprint software driver(s) are not yet availble for this LaserJet model - or are they?

There is firmware to enable AirPrint in the HP LaserJet CP1525nw.
Go to the support page for this printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=40529...
and pick the type of desktop computer you are using. On the resulting page you will see a choice to download a firmware updated that you can run on your computer to update your printer.

Enable Web Services on HP LaserJet CP1525nw

We are trying to setup web service printing on HP LaserJet CP1525nw.
This is a networked printer, from a windows server 2008 R2 server to Windows 7 x64 machines
It is connected to a wired network and everything (printing etc) works execpt web service.
We have set the DNS manually to 8.8.8.8 and secondary dns to 8.8.4.4 and restarted
We also have white listed the Printer IP on the firewall so it has access to internet through the network without being filtered. (Does anyone know what are the IP address for the web services on the HP side?)
When we access the Printer using its IP and go to Web Services Setup and hit 'Enable' it sits on that screen for about 2 minutes and failed
"Connection error Check connection"
Any advise is much appreicated.
This question was solved.
View Solution.

Success its working now !!

Hp laserjet cp1525nw

I recently purchased the Laserjet CP1525nw color printer and 256MB ram upgrade (non HP). The printer works fine without the ram inserted. I had our vendor replace the ram and still the yellow triangle on the printer lights up and doesn't print until i remove the ram. The HP ram is about $400 so i didn't get that and got the $50 one from another manafacturer. Has anyone else had this issue? Will this printer only accept that particular ram chip? $400 for 256MB seems ridiculous! Any assistance would be greatly appreciated. The firmware is up to date and my last option is to contact HP and see if they can assist. Thanks.

Hey Dan_the_Man_21,
Welcome to the HP Forums!
One way to fix the option of having the menu disabled, is to try and re-enable the option through the Embedded Web Server (EWS) of the printer. To be able to access the EWS, you will need to print a configuration report to get the IP address of the printer. I have included the document 'Printing a Configuration Report'.
Next you will need to open up your Internet browser, and type the IP address into the address bar. Once the page loads with your printers information, you will need to click on the System tab. Then click on Administration on the left hand side.
Please let me know if this works for you.
I worked on behalf of HP

HP LaserJet CP1525nw menu access

I am unable to access the Service Menu on my HP LaserJet CP1525nw printer. I get a message saying "Menu access is diabled". Any help I can get with this issue would be greatly appreciated. Thank you.

Hey Dan_the_Man_21,
Welcome to the HP Forums!
One way to fix the option of having the menu disabled, is to try and re-enable the option through the Embedded Web Server (EWS) of the printer. To be able to access the EWS, you will need to print a configuration report to get the IP address of the printer. I have included the document 'Printing a Configuration Report'.
Next you will need to open up your Internet browser, and type the IP address into the address bar. Once the page loads with your printers information, you will need to click on the System tab. Then click on Administration on the left hand side.
Please let me know if this works for you.
I worked on behalf of HP

Hp laserjet cp1525nw will not sync to wireless after the Internet network is lost and returns

My hp laserjet cp1525nw works fine UNLESS the cable modem losses signal. At this point the blue light on the printer blinks. This continues after the signal comes back from my ISP. The only way to get the printer to work wirelessly again is to power cycle it. I have tried pushing the wireless button below the blue lite. My J6480 works fine.
Any ideas,

Hey there @FC111 , welcome to the HP Community
If you are running a Windows OS, you can try running the Print and Scan Doctor to potentially find your home network again and connect to it. If that does not work, try Uninstalling the Printer Software and reinstalling the printer.
I hope that helps, let me know the results and which OS you're running.
Happy Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP LaserJet CP1525nw makes terrible swealing noise when printing

Product: HP LaserJet CP1525nw
OS: Windows 7
Error Msg: none
The product makes a loud squealing noise when printing. It also leaves streak marks on envelopes.
Product was purchased Dec. 21, 2010, so is only a little over one year old, but is out of warranty.
Please also advise where I can find authorized HP LaserJet repair in Brooklyn, NY.

Hi Grey_Ghost;
Hope you are doing and sorry that you are having this issue;
Call here : 1-800-625-0242
They may be able to guide you or provide with that information.
I did Google search and found a few in the New York city area Perhaps doing this may help you as well;
Hope It helps;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Color laserjet CP1525nw won't print in color

I installed both the PCL6 and PostScript drivers on my Surface Pro 3 to print to my Color LaserJet CP1525nw. The printer is connected to my router. The printer prints but only in grayscale. What can I do to be able to print in color and continute to print through my router?
This question was solved.
View Solution.

Hi @PaDunc ,
I see that you are experiencing issues printing in color from the printer connected to the router. I would be happy to help you.
Please clarify, if the printer is connected to the router by a ethernet or USB cable?
Did you install just the Universal Print Drivers or did you try the Full Feature Software also?
I would recommend the Full Feature Software if that isn't one of the drivers you have already tried.
Try and print the Supplies Status page to see if you have color, just to rule out a hardware issue.
Printing or Viewing the Supplies Status Page.
Make sure the greyscale option isn't enabled in the print driver.
1. From Devices and Printers, right click your printer.
2. Then click the Printer Properties, Preferences button.
3. Click the Color tab.
4. Make sure Print in Grayscale isn't checked.
Did the colors print?
What are the toner levels?
Are you using Genuine HP Toner?
Try these steps in this document, to see if it will resolve the issue.
Resolving Print Quality Issues.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Does WET200 support WPA-Enterprise/TKIP?

I could not connect a WET200 (newly bought) to our WPA-enterprise/TKIP wireless network.
Can anyone tell me what was wrong? Does WET200 support WPA-enterprise? Please help!
Thanks a lot.

B**r!!!
oh well, one can only hope that there'll be an upgrade real soon now
Alex

Extend WPA Enterprise

Does anyone know if there is any way I can connect my Time Capsule to my University wireless network?
I live right opposite my university and if I put my laptop on my window sill I can connect to the wireless, but can't connect from my desk... I was wanting to put my time capsule on my window sill, use that to connect to the Uni wireless and thus extend the connection into my room...
Does anyone know a way to achieve this? My Uni uses WPA Enterprise encryption...
Many thanks.
Andrew.

One possible option, with your existing equipment, would be to reconfigure your Mac as a "software" router by employing OS X's Internet Sharing feature. In this case you would be sharing the Mac's wireless Internet connection through its Ethernet port. Theoretically, you could then connect the TC to the Mac's Ethernet port; reconfigure the TC as a bridge, and then connect clients to the TC.
Personally I haven't tried this to verify that it would work. Mainly because using a Mac as a software router is extremely limited as far as features that this would provide.

Remembering WPA Enterprise Network

At my university, the wireless network is a WPA enterprise network. Each time I want to connect, I have to enter everything in manually. How do I get it to remember the network?

Thank you both for your replies. I am trying iphitus ideia but am having trouble and the wiki doesn't have much info (not related to this issue at least).
ifconfig -a related to the wireless interface:
eth1 Link encap:Ethernet HWaddr 00:19:D2:1A:56:35
inet6 addr: fe80::219:d2ff:fe1a:5635/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:12 dropped:1347 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:38366 (37.4 Kb) TX bytes:3727 (3.6 Kb)
Interrupt:16 Base address:0x4000 Memory:d8000000-d8000fff
lsmod | grep ipw:
ipw3945 200484 0
ieee80211 30664 1 ipw3945
sudo /usr/bin/netcfg-auto-wireless eth1
:: Scanning for networks [DONE]
:: eduroam up - Configuration generation failed: ctrl_interface=/var/run/wpa_supplicant [BUSY]
ctrl_interface_group=0
Passphrase must be 8..63 characters
sudo netcfg2 eduroam
:: eduroam up - Configuration generation failed: ctrl_interface=/var/run/wpa_supplicant [BUSY]
ctrl_interface_group=0
Passphrase must be 8..63 characters
eduroam profile in /etc/network.d/:
CONNECTION="wireless"
INTERFACE=eth1
SCAN="yes"
SECURITY="wpa"
ESSID="eduroam"
KEY=<censored>
IP="dhcp"
TIMEOUT=30
I don't think this information in the profile is enough, doesn't say which WPA protocol uses, nor the user (in the WPA Enterprise case) so I believe the problem might be related to that lack of info in the profile. The wiki didn't have an example for WPA enterprise though
EDIT: Also my wpa_supplicant.conf is like the one on my first post with these aditional lines:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
Last edited by Grimn (2008-03-03 09:51:53)

LaserJet CP1525nw & WPA-enterprise

Similar Messages

Maybe you are looking for