Laserjet driver with Windows 7

Windows 7 professional 64 bit freezes when printing to HP Laserjet M1530 MFP . Is there a newer driver?

Hey twars,
I am guessing you have the Laserjet Pro M1536dnf, correct me if i'm wrong.
The most recent driver released for this model printer was January 7, 2011.
However, as to the print jobs freezing.
When was the last time the printer and PC were power cycled?
If the printer is connected through a network connection, when was the last time the router was restarted?
Have you tried running the HP Print and Scan Doctor? This is an automated troubleshooting tool. The PSDR can be accessed by clicking here.
If you provide a bit more detail I will try my best to provide further assistance directed at the issue you are experiencing.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

HT6114 My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

Restore from the backup you had prior to installing Mavericks.
However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?

Same computer 2 heard drives with windows 8.1 on them.

Hello
Same computer 2 heard drives with windows 8.1 on both heard drives.
When I boot into one of them everything works great, but when I boot into the other heard drive it say's at boot up,
(the number of connections to this computer is limited and all
connections are in use right now. try connecting later or
contact system administrator.)
And I cant get into my other heard drive with windows 8.1 on it. Because the computer will not even boot into windows.
Thank You.
[email protected]
P.S. it did work at one time never head that happen to me be for. I mean I would plug in ether drives and it would work fine same computer same hardware. Just would unplug one heard drive and plug in other.

I hear ya, never heard of that before.
I'm still trying to puzzle that one. ZZ would have added "clarity" if we had a guess at least for it. Virtual perhaps? <eg>
Robert Aldwinckle

Laserjet 4+ with Windows 8.1

Does anyone know how to install a Laserjet 4+ with Windows 8.1?
This is a great workhorse printer and we hate to replace it.

Hi, does your 4+ have a JetDirect card?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Load Leopard on a New Hard Drive with Windows XP already loaded

How can I load a new, fresh Leopard operating system on a new hard drive, with Windows XP already loaded and working on it's own independent hard drive via bootcamp beta. I have been using Tiger on it's own drive and wish to discontinue Tiger and move to Leopard without reloading windows. Can I just put in a new drive, and load Leopard with the Windows drive in place?
Please, any suggestions would be appreciated.
Mac Pro Mac OS X (10.4) Runing Windows and Mac operating systems

Malcolm:
Thanks so much for replying to my question! I am new to MAC and have Tiger and Windows XP on separate drives. I will be removing the drive with Tiger and putting in a new drive to load Leopard and I wondered how that would effect accessing Windows XP since the Windows drive will remain in the system. Is there anything I need to do with bootcamp, since Windows was loaded using the Beta version of bootcamp, and bootcamp icon currently shows in the Windows XP taskbar. Tiger was pre-loaded when the computer was purchased. In fact I had to backdate the beta bootcamp version in order to get it to work. I hope this is not asking too much, but I wondered if there would any problem with Windows after the Leopard load.
THANKS IN ADVANCE!!

Can my iSight work on partitioned hard drive with windows 7?

I have a macbook pro 17in screen, snow leopard. I have yet to get it updated to the latest operating system. I partitioned the hardrive to run windows 7. The built in iSight camera is not working. The dvd player will not visual to tv or projector. If I wanted to project a power point presentation, it wont transfer thru the hardware provided by the mac.

kmburr wrote: Can my iSight work on partitioned hard drive with windows 7?
Yes. If you are using BootCamp to boot Windows®, see Apple - Support - Boot Camp for help.
If you are using an virtualization emulator like Parallels, VMware Fusion, CrossOver Mac, or VirtualBox, seek help from its support site.
kmburr wrote:... The built in iSight camera is not working....
If the problem continues after turning Mac off for a minute or two and restarting in Mac OS X with no external devices connected, see Apple's How to Troubleshoot iSight.
Be sure to test more than one Apple camera app in more than one user account.
kmburr wrote:... The dvd player will not visual to tv or projector....
I do not understand this sentence. We can try to help with this after you get your other problems corrected. However, to minimize confusion among problems right now, I suggest you not respond to this unless you can explain how it is related to your other issues.

ICloud drive with Windows 7

Hello,
Has anybody managed to get this working with the purchase of extra storage?
I currently have 200GB in the cloud, but whenever I try to copy any data into it via Windows explorer, I get a message along the lines of "please purchase more space". I know this is nonsense, as from my icloud drive panel within Windows I can clearly see that I have only used 11GB of the 200GB available.
Before anyone asks......
I am aware that I cannot copy files >15GB and no, I'm not trying to copy a folder structure anywhere near the size of the 189GB that is currently free. I get this message even if I try to copy a mere 10GB into my icloud drive.
I have had a call open with Apple Support regarding this for 2 weeks now. They are basically clueless.
I've subscribed to cloud storage and yet I don't have any. It is an absolute joke.
Please can somebody help where Apple Tech Support are painfully falling short?

Hi, mspec55505.
Thank you for visiting Apple Support Communities.
I understand that you have questions about using iCloud Drive with Windows Vista. Currently, you will need Windows 7 or later to use iCloud drive for Windows.
iCloud Drive FAQ
Cheers,
Jason H.

Cannot install HP Photosmart 2610 Driver with windows xp

cannot install HP Photosmart 2610 Driver with windows xp. keep getting registry error messages part way through the instal.. any suggestions? Thanks

Hello,
Please check if you have an ADMIN rights to log into your PC.
Else, create an ADMIN user account and then run the installation ,
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Laserjet 5000 with windows 7 driver cannot print multiple copies unless disabling mopier

Customer has Laserjet 5000 that they have been using for approx 5 years. It is connected to one computer with the standard parallel cable and the driver is using lpt1. It is used mainly to print word documents and a multi page publisher document. The computer used to be a windows xp computer and all worked well with the PCL6 driver and that is the only driver that was used
They just bought a new Windows 7 32 bit computer and now it has lost some of the functionality.
The first driver that was loaded was the driver that Windows 7 used after you use the windows update button that you get during the add printer wizard. I think it was the pcl 5 driver as that is the driver that the computer will install if you remove the printer and then restart the computer. Using this driver, when you choose to print more than one page or multiple copies, it will just print the first page or copy and there will not be any errors displayed.
I have since downloaded the PCL6 driver, PS driver and PCL5 driver from HP's website and tried all of them.
The PS driver will print more than one page, but when it gets to about the 4th page the printer prints out an error page. The error is PCL XL error, Subsystem: Kernel, Error: Unsupported protocol, Operator 0x0, Position:0
The PCl 6 driver will print the same error page and not print any print jobs, even if it is just a single page, single copy job.
The pcl 5 driver prints one page and then stops printing, no errors.
When I disable the mopier under device settings, the pcl5 driver will print everything just fine. Only problem is, it will not collate. The collate checkbox is available and checked when we try the multiple page multiple copy publisher document, but it just prints out as if we do not have collate checked. If we could get collation to work, than we are good to go.
I have not tried the PS driver with the mopier disabled.
The PCL6 driver stills returns the pcl xl error with the mopier disabled.
The printer does not have any extra memory, just the 4 mb standard that came with the printer. I am wondering if this is a memory issue triggered by Windows 7and I just need to get more memory for the printer. (Computer has 4 gb of memory)
Anybody else have a similar issue and got theirs fixed?
Thanks in advance.

Hi jnickelsen,
I understand the printer won't print multiple copies.
Thank you for your reply.
I will be happy to help you with this.
This printer doesn't have the Mopier settings.
What drivers are you using?
Did you download the drivers or are you using the Windows preinstalled drivers?
If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printer driver for HP LaserJet 4L with Windows 7

I cannot find the printer driver for my LaserJet 4L in Windows 7. I have a parallel to USB converter cable attached to my computer. I need the drivers.
Thanks.
This question was solved.
View Solution.

My Windows 8.1 Pro 64-bit system has a built-in driver for this printer model:
I don't know whether the driver is present on a fresh Windows install; it may only have appeared in the list after the Windows Update button was clicked on the above Add Printers dialogue, then waiting (perhaps for several minutes) whilst additional drivers were downloaded, and the list repopulated.
I'd assume that the same might be true of earlier Windows versions as well.

HP Laserjet 4L with Windows 7

I just purchased a new computer with Windows 7 Professional (32 bit) and Microsoft Office Small Business Professional. My HP Laserjet 4L was installed and a test print page printed ok. However, when I try to print documents and/or emails with a lot of graphics, the graphics overlay each other and the text.
Can anyone help?
Thank you
JCF

My Windows 8.1 Pro 64-bit system has a built-in driver for this printer model:
I don't know whether the driver is present on a fresh Windows install; it may only have appeared in the list after the Windows Update button was clicked on the above Add Printers dialogue, then waiting (perhaps for several minutes) whilst additional drivers were downloaded, and the list repopulated.
I'd assume that the same might be true of earlier Windows versions as well.

HP laserjet 1300 with windows 7 (64 bits)

Please help me to find why my printer Hp LaserJet 1300 cannot print more than 1 copy with Windows 7 (64 bits). Is a new driver to solve this problem.
Thank You
HiRichard

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Problem Laserjet 1000 with Windows Vista 32 bit

Good morning. I have a laserjet 1000 connected to the USB port on another computer with windows xp and shared. I have to connect it to another pc with windows vista pc with ip address. Install the printer but does not work. I used the driver for win xp as I read on several forums but it does not work. What kind of driver should I use ?
Can you give me some advice ?
Thank you

If your model is lacking the correct Vista drivers from Lenovo and Vista doesn't offer native support then I see upgrading to Windows 7 as your only option. Here is a link to what Lenovo drivers are available.......
http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS035825
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Pavilion A6750F hangs after new drive with Windows 7 64 install. Suggestions?

Pavilion A6750F new hard drive with clean install of Windows 7 64. The system will hang on many screens from IE to Outlook 2003. If I wait, they will correct themselves. The Bios is version 5.13, but I do not see an update available.

Hi,
There might be several items to check. Open the RUN window and enter: MSCONFIG
Make that the boxes under the Advanced TAB are unchecked.
It's very possible since you installed a new hard drive that the hard drive is faultly. Recheck the sata cables and run some bios diagnostics.
Open the RUN Window and enter the following command: chkdsk
Open my Computer and right mouse click on the hard drive --> properties --> Tools --> Check now
What is the make and model of the new hard drive?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Question about using HFS+ & FAT partitioned hard drive with Windows

Theoretically, if I have a [mobile] hard drive with one partition being "HFS+" and the other partition "FAT," What would happen if I used it on a PC? Would it only mount the "FAT" partition or both the "FAT" Partition and the "HFS+" Partition?
Apple Mac mini (2005) Mac OS X (10.4.7) PowerMac10,2: 1.5GHz, 512MB RAM, 80GB HD, BT/AE...

Unfortunately, you cannot have drive partitioned partly as Mac OS Extended and FAT32 that can be used on both a PC and a Mac. To use the drive on both you need to format the entire drive FAT32 as a single partition. Alternatively, you can format the drive Mac OS Extended and partition the drive, but to use the drive on a Windows PC you would need Windows software for reading and writing Mac disks, such as MediaFour's MacDrive.
That said there is a technique for doing what you want, and it's described here.

Laserjet driver with Windows 7

Similar Messages

Maybe you are looking for