LaserJet M1120n MFP - Problems with printing over Wireless Network.

Hi. I have recently purchased a HP M1120n MFP printer. There are three wireless laptops (Vista, & XP Pro) that use this printer via a DrayTek Vigor 27000GE wireless router, then via cat 5 cable to Ethernet on printer.
All three laptops can print, but sometimes the print queue backs ups. The top print job will say "Printing" but it can say this for hours! Then if I delete the print job, it will say "Deleting" - but nothing happens. The only way to clear it is to reboot the laptop.
Firmware datecode is 20080228.
If I connect via USB cable directly to the printer it works correctly.
Any ideas to help resolve this frustrating problem?

The bottomline is that this printer has no way of connecting other than a straight USB connection. In order to make it wireless you have to have a device that will give it an network IP address. The printer by itself can not do this.
The only way to get this printer on a network is to buy a SEPERATE USB Printer Server. Or, buy a separate router, like I said, that has a USB connection on the back that will support printers.
You can not connect it the way you want as it stands right now.
However, call your ISP and have them set it up IF their Gateway device has a USB connection and really can support a printer. It is their issue.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Problem with printing over wireless network

Hello. I have a HP psc 2410 all-in-one printer.
I've recently bought a modem router which has a capability called"printer-server" and I decided to use this feature and print over wifi. I set it up but with a problem. when I print something, for instance, test page, instead of printing just one page, It will print "test page" in 3 pages( something like partial pages and which the last=third page is printed blankly) and then It freezes(printer screen shows "printing" and I have to cancel the job, otherwise it freezes and I have to replug it). I have this trouble not just in test page but at least from IE, office, PDF files. This problem is essentially about Wifi, since If I connect the printer directly to the PC or laptop via usb, it works absolutely fine. also I have tried printing with different laptops over wifi but no go. below are more information which I have to mention:
1)Router is on WPA-PSK encryption type.
2)There is no mac-filtering or hiding SSID going on.
3)one laptop and an iPad is connected to router via wifi and a PC which is connected by LAN cable.
4)The printer IP address is the same as Router's settings page IP address.(192.168.0.1)
5)I can't open the printer's internal web page by entering the printer's IP address in browser since it's the same as router IP address.
6)Firewall on my laptop( windows 7 32-bit) is off and I'm using no Anti-virus.
7) I have tried HP PRINT AND SCAN DOCTOR, but it says the printer is OK.
thanks
Leland
EDIT: after investigating for hours, I finally managed to get rid of freezing problem. now there is just one problem of that partial printing which happens coincidentally over wifi! I mean, sometimes it happens and sometimes not!
any suggestions? I'd really appreciate it
This question was solved.
View Solution.

The bottomline is that this printer has no way of connecting other than a straight USB connection. In order to make it wireless you have to have a device that will give it an network IP address. The printer by itself can not do this.
The only way to get this printer on a network is to buy a SEPERATE USB Printer Server. Or, buy a separate router, like I said, that has a USB connection on the back that will support printers.
You can not connect it the way you want as it stands right now.
However, call your ISP and have them set it up IF their Gateway device has a USB connection and really can support a printer. It is their issue.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP LaserJet M1120 MFP will not print on wireless network with Windows 8.1 operating system

The printer worked on the wireless network with Windows 8.
I have been advised that it does not work with windows 8.1 because a driver is required. However this is not available to download.
It is ridiculous that by having the latest operating system I am unable to use the HP printer on the wireless network
When will HP have the driver to download?

Check the support site here.
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-LaserJet-M1120-MFP-will-not-prin...
Make sure you have the firmware update also.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Problem with iChat over wireless network

iChat with AIM account has always worked fine, but from the moment I installed a netgear router over a wireless network it enters a loop of disconnection/connection until I get the message "you have been connecting and disconneting too frequently". Someone else ? What to do ?

Can you marked this thread as Finished then please ?
10:35 PM Sunday; January 25, 2009

HP Laserjet M1132 MFP is too slow over the network!

Hi,
My HP Laserjet M1132 MFP is too slow over the network!
I have connect the printer to a windows XP 32bit SP3 using UBS port. The printer works fine on the local computer but when sharing it over the network it works too slow, for example with print test page it takes about 45 seconds to print and for other documents it takes much longer time.
I have installed the latest driver form HP website and upgrade the firmware it the latest version.
It happens on other Windows XP machines as well.
I connected the printer to my laptop (Windows 7 64bit) and it works fine (No delays over the network) and it seems that this problem have some relations with the windows XP Driver.
I have used local port trick on remote machines (instead of regular method) like this:
''add a local printer;
'new port'
'localport'
\\XPcomputer\HPPrinterName as port name
but still nothing!
There is nothing wrong with the network, we use to use a Samsung printer on the same machines over the network with no problem.
I Really appreciate your HELP!
This question was solved.
View Solution.

BEHZAD_T, how is the printer connected to the network (wireless or Ethernet)? If it is slow wirelessly, I would suggest trying to connect the printer to your router with the Ethernet cord and install it to the networked computer that way.
Another question is, relatively speaking, how close to your router are the Samsung printer and the HP printer? Depending on the distance (and what stands between the devices) there can be a lag between sending a print job and it being received by the printer.
Let me know!

Printing to shared windows printer over wireless network

Hi,
I just bought my wife a MacBook and recently updated it to Leopard (OS X 10.5). I have a Lexmark X5150 printer connected to a desktop PC running Windows XP. I can share files between the two computers no problem either wirelessly or through an ethernet connection through my router. But, I'm having troubles accessing the shared printer through the Macbook wirelessly. If I connect the printer directly to the Macbook, I can add the printer with appropriate drivers no problem. However, when I try to add the printer as Windows shared printer, the appropriate driver doesn't show up in the drop down list. I can navigate to and find the printer over the network fine, but I just can't find the right driver. I'm a newbie to Mac and was wondering if there is anyway to find the driver using Finder or something similar to determine where it physially resides on the Mac. I know it's there because it is automatically selected when I directly connect the printer to the Macbook and add the printer. Any thoughts??

Couldn't figure things out, so I'll just stick with connecting the printer directly to the macbook.

Problem with Skype and Wireless Networks

I have been having a problem with Airport for about 10 months. Long winded explanation follows.
Initially file transfers over wireless networks were extremely slow but this seems to have been that 10.5.2 update problem. There is a remaining issue when I use Skype on my Mac (details below) connected to a wireless network the incoming and outgoing audio drop out for 1 - 3 seconds at irregular but frequent intervals (approx every 5 - 10 seconds). This is regardless of the wireless network I am on - and that is dozens of them all over the world. Note it is voice only calls, not video. Apple has replaced the Airport card and the mother board; the OS has been reinstalled; test accounts set up but nothing fixes the problem.
At one point I had temporary relief by switching off 'Configure IPv6' in System Preferences/Network/Airport/TCP/IP. This worked for a month or so but now the problem is back as before.
All other aspects of wireless activity are fine. Wireless firmware is 1.4.4.
I have worn out my welcome with the usually sensational help desk. Any suggestions out there in Mac Land?

Hi there
Been a hectic week here getting this problem resolved. It is all OK now. Here is what we found and how it was done.
When Airport was playing up we set up an unlimited ping of the wireless router in the office. This is what it showed:
PING 10.10.10.1 (10.10.10.1): 56 data bytes
64 bytes from 10.10.10.1: icmp_seq=0 ttl=255 time=1929.885 ms
64 bytes from 10.10.10.1: icmp_seq=1 ttl=255 time=929.788 ms
64 bytes from 10.10.10.1: icmp_seq=2 ttl=255 time=2.633 ms
64 bytes from 10.10.10.1: icmp_seq=3 ttl=255 time=1.845 ms
64 bytes from 10.10.10.1: icmp_seq=4 ttl=255 time=1.941 ms
64 bytes from 10.10.10.1: icmp_seq=5 ttl=255 time=1922.656 ms
64 bytes from 10.10.10.1: icmp_seq=6 ttl=255 time=922.724 ms
64 bytes from 10.10.10.1: icmp_seq=7 ttl=255 time=2.012 ms
64 bytes from 10.10.10.1: icmp_seq=8 ttl=255 time=1.974 ms
64 bytes from 10.10.10.1: icmp_seq=9 ttl=255 time=2.283 ms
64 bytes from 10.10.10.1: icmp_seq=10 ttl=255 time=1918.448 ms
64 bytes from 10.10.10.1: icmp_seq=11 ttl=255 time=919.372 ms
64 bytes from 10.10.10.1: icmp_seq=12 ttl=255 time=2.609 ms
64 bytes from 10.10.10.1: icmp_seq=13 ttl=255 time=2.037 ms
64 bytes from 10.10.10.1: icmp_seq=14 ttl=255 time=2.259 ms
64 bytes from 10.10.10.1: icmp_seq=15 ttl=255 time=1921.022 ms
64 bytes from 10.10.10.1: icmp_seq=16 ttl=255 time=920.825 ms
64 bytes from 10.10.10.1: icmp_seq=17 ttl=255 time=2.416 ms
64 bytes from 10.10.10.1: icmp_seq=18 ttl=255 time=2.063 ms
64 bytes from 10.10.10.1: icmp_seq=19 ttl=255 time=1.954 ms
64 bytes from 10.10.10.1: icmp_seq=20 ttl=255 time=1917.649 ms
64 bytes from 10.10.10.1: icmp_seq=21 ttl=255 time=917.617 ms
64 bytes from 10.10.10.1: icmp_seq=22 ttl=255 time=2.018 ms
64 bytes from 10.10.10.1: icmp_seq=23 ttl=255 time=2.057 ms
64 bytes from 10.10.10.1: icmp_seq=24 ttl=255 time=2.106 ms
64 bytes from 10.10.10.1: icmp_seq=25 ttl=255 time=1916.329 ms
64 bytes from 10.10.10.1: icmp_seq=26 ttl=255 time=916.347 ms
64 bytes from 10.10.10.1: icmp_seq=27 ttl=255 time=2.020 ms
64 bytes from 10.10.10.1: icmp_seq=28 ttl=255 time=2.151 ms
64 bytes from 10.10.10.1: icmp_seq=29 ttl=255 time=2.005 ms
64 bytes from 10.10.10.1: icmp_seq=30 ttl=255 time=1915.818 ms
64 bytes from 10.10.10.1: icmp_seq=31 ttl=255 time=915.821 ms
64 bytes from 10.10.10.1: icmp_seq=32 ttl=255 time=2.091 ms
64 bytes from 10.10.10.1: icmp_seq=33 ttl=255 time=2.061 ms
64 bytes from 10.10.10.1: icmp_seq=34 ttl=255 time=2.064 ms
64 bytes from 10.10.10.1: icmp_seq=35 ttl=255 time=1911.739 ms
64 bytes from 10.10.10.1: icmp_seq=36 ttl=255 time=911.753 ms
64 bytes from 10.10.10.1: icmp_seq=37 ttl=255 time=1.923 ms
64 bytes from 10.10.10.1: icmp_seq=38 ttl=255 time=2.788 ms
64 bytes from 10.10.10.1: icmp_seq=39 ttl=255 time=1.911 ms
64 bytes from 10.10.10.1: icmp_seq=40 ttl=255 time=1907.626 ms
64 bytes from 10.10.10.1: icmp_seq=41 ttl=255 time=907.528 ms
64 bytes from 10.10.10.1: icmp_seq=42 ttl=255 time=1.847 ms
64 bytes from 10.10.10.1: icmp_seq
and so on.
After discussion with tech support they said the Airpot card had to be replaced. This was done with admirable expediency and I got the MBP back in 36 hours. On testing it the same problem was still there. Identical pattern on the ping test, the fault was not the hardware.
Once more a call to Apple and another tech. This time we booted from the OS 10.5 install disk and ran the ping test. I ran it for a few hours without seeing the fault, it worked fine. The problem had to be in the operating system.
After backing up all the data I zeroed the drive and did a clean install of the OS. Bingo! Problem gone.
So after 10 months, two airport cards and a mother board, the issue was in fact something corrupt deep in the OS.
So to anyone having similar problems with Airport, run a ping test as described above. If you see that kind of pattern, try a clean install before going down the hardware road.

Problem with printing over the shared network printer

I have a very irritating problem.
To describe the situation. I have 2 computers and non of them is mine. First one have Windows Vista, and second one have Windows 8.1. There is also a printer which is connected with usb to the computer with Windows 8.1. I managed to share that printer on
the network, and when I connect to that printer and enter username and password (from Windows 8.1) on the pc that have Windows Vista, I can print without any problem.
The problem start when I restart the computer with Windows Vista. I can't print unless I connect to that printer again and again enter the username and password. Like Windows Vista for some reason is not storing those credentials. It is very irritating to
do that all the time, becase everything worked before like a charm.
Is there something I didn't do about those credentials, or is there some batch script that I could run in startup that will connect Windows Vista PC with that printer without any user input?
Thank you.
Development Technician, Microsoft Certified Professional

Hi,
When you restart the Vista, have you checked the credential in credential manager (Control Panel\Credential Manager)? Does it exist? You can clear cached unused credential and manually add the printer Windows Credential in the manager and check if it
helps.
You can also use a logon script to add the printer automatically every time you logon to the PC, you can refer to thsi example, some content need to be changed depends on your configuration.
http://gallery.technet.microsoft.com/scriptcenter/10ab836d-4d38-45a5-8d27-ba9af1717930
http://blogs.technet.com/b/heyscriptingguy/archive/2006/12/12/how-can-i-add-a-network-printer-at-logon-and-optionally-make-that-the-default-printer.aspx
http://technet.microsoft.com/en-us/library/cc770908.aspx
Yolanda Zhu
TechNet Community Support

Problems printing over wireless network

i gave my parents a macboook pro and wireless router, and i also gave them my old g4 tower. i set the g4 up to print via usb connection to the hp 2410 all-in-one printer....no problems there. the g4 is also connected to the network via ethernet (cable modem).
then i set up the router so the MBP could connect to the internet...no problems there. wireless router connected to the cavle modem.
then i tried to print wirelessly from the MBP to the printer....no luck. printer sharing is on and drivers are installed, but the MBP isnt recognizing a printer on the network. any help??

"drivers are installed"
Did you check the printer's manufacturer site to confirm the drivers are updated? Besides my printer's own drivers I also use Gimp drivers which can be found HERE.
Did you repair permissions & then restar your comoputer?
On all your computers using the printer, check System Preferences>Sharing>Services
Make sure +Printer Sharing+ is ON.
Your system info confirms you are only using OS 10.6. Update your OS & check Software Update to install all the other updates that goes along w/it.
!http://i50.tinypic.com/izvwo1.gif!

Can't Print Over Wireless Network to HP OfficeJet 6210 connected to XP Comp

I've been trying in vain for the better part of a week and a half to print from my MacBook Pro (w/ Leopard 10.5.5) over my wireless network (Linksys WRT54G Wireless Router) to an HP OfficeJet 6210 connected to my Dell Desktop running Windows XP SP3. I CAN however, both see and print to the printer with a PC laptop running Windows Vista. I've both re-installed and upgraded the drivers to the Windows XP desktop AND the MacBook Pro for the printer and still can't come to a conclusion. I am able to print to the printer from the MacBook Pro when plugged directly in via USB. I've tried to add the printer via "Windows" tab in printer configuration by choosing the network, then the computer, then entering the administrator accounts user name/password, however I'm still unable to print from the MacBook. Any ideas and suggestions would be greatly appreciated. Thanks!
Message was edited by: LukeZim

Hi LukeZim,
Sorry, but drivers on OS X aren't like on Windows (yet), where a driver is just a component in a system that works for all the comm protocols the computer can do. That's the way it would be if manufacturers provided CUPS drivers (CUPS is the print control system on OSX). But most manufacturers are still providing Carbon drivers - where the comm protocol is limited to what is put into the driver. HP provided a Carbon, USB-only driver for your printer. You'll need to use a third-party CUPS driver to use Windows Printing.
Gutenprint drivers (included with Leopard) are CUPS drivers, for example.
http://openprinting.org/showprinter.cgi?recnum=HP-OfficeJet6200
CUPS drivers:
http://www.linuxfoundation.org/en/OpenPrinting/macosx

Scan to printer over wireless network

Hi there,
I have the pixma mx882 printer and it is configured over my wireless network. I am trying to locate the scanning software that enables me to scan via the wireless network?.
I tried the MP Navigator EX V4.1.3, although it says I need to connect the printer via USB. I presume there is a way to scan back to my Windows 7 PC via the wireless config I have?
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/office_all_in_one_inkjet_prin...
Thanks for your help.

Hi motoq79,
With MP Navigator EX installed and the printer setup on the network, you may need to configure a few additional things to be able to scan over the network.
We have an excellent article on our Knowledge Base that details all the setup that is necessary to scan over the network. To view the article, CLICK HERE.
If this didn't work, or if you have any other questions, please feel free to Contact Us!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Printing over wireless Network connection

Both my iMac and Macbook are networked over a wireless network. My printer is connected to my MacBook.
I have turned on print sharing on both computers and am able to see the printer that's connected to my MacBook on my iMac, but when I try and print something on my iMac, nothing happens.
It gets added to a print queue on the iMac, but not the MacBook.
Can anyone give me an explanation as to why this is happening? and how to rectify this?
Thanks!
Phil

I have a PowerMac G5 desktop which has a printer attached by USB. I have a wireless router, to which the G5 is connected by Ethernet, and a MacBook wirelessly. Printer Sharing is turned on on the G5 because it is "hosting" the printer. I don't have Printer Sharing turned on on my MacBook. I can print wirelessly from the MacBook even though printer sharing is off (I do have file sharing turned on, however). Any computer on the network (I only have a MacBook) can see the printer attached to the host G5. I wonder with your setup why your printer is attached to the laptop and not the desktop (just your preferred setup I guess). I wonder if having both computers' print sharing on is confusing things b/c only one of them actually has a printer attached. I do remember having to reboot in the early days of my setup when I had Printer Sharing enabled on both machines. But like you said it is working so it really doesn't matter.
My $.02 worth.

Can't see shared printer over wireless network

I currently have a newer HP F340 injet printer connected to my emac which is on a wireless network (Linksys) so that I can share internet connection with my MacBook Pro. Both are running Mac OS 10.4.8. When I try to print on my MacBook Pro, I don't even see the shared printer, in fact, there isn't even a separate chioce for shared printers. I used to have a Lexmark printer that actually worked on the network.

After following some advice from a different posting, I loaded the gimp print drivers and recreated the printer in the printer listing using the gimp printer. This worked! The only problem I had was that I had to load the whole Mac OSX base system and then the print drivers. This messed up my system and I had to reset a bunch of user preferences, etc. It took me a couple of hours.

Problem with Time Capsule Wireless Network...

I have Time Capsule over a year and it worked fine with Xfinity Modem. Recently, Xfinity had upgraded modems to Wireless router and I have ARRIS TG862 from them. I was able to set up wireless network using bridge mode on my Time Capsule and it all worked fine for a while.
My set up is: Arris Router is conected to Time Capsule thru ethernet connection. I have two more Airport Express in different areas of the house (one in Theater room and one in upstair office). I have conncted one port of Time Capsule to linksys switch which is supplying connection for all wired devices on network.
Last week, our wirless network stopped working and I rebooted router and TC. Still no resolution. I went ahead and set up the TC to factory settings but forgot to plug out all the network connections from it. I reconfiugred Apple TC with same wireless network name and same network settings. Most of the wired devices are connecting fine and two of the iphones and Macbook Pro won't connect. iphones, seems to be getting IP address but won't connect to interent. My windows laptop says connected to "EAGLE" my wireless network but "EAGLE 2" provides internet connection. I have reset my TC to factory defaults and reset same way so many times but still same results. I called Comcast and asked them to turn off wireless in their router thinking that router is creating a second wireless network but I still have the same issue.
Any suggestions on how should I set up my TC? I think, it went insane..............:(
Should I set up TC with a brand New wireless network Name to resolve this issue?
I have 7.6.4 version on TC.
I thought I knew, but what's the right procedure to set up TC? Plugged in the router and unplug from everything else and connected thru an ethernet connection to my laptop?
I have wasted so much time on this with the same results every time.
I did unplug all the network connections from TC and reset to factory defualts and set up my wireless again but same results.
Can someone please help me with this? Thanks in advance.

What is the model of the TC? The actual number.. A1xxx from the base of the TC is important.
When you have a modem router.. then the TC must be in bridge mode.. and create a wireless network.
Your names are not yet windows compatible.. please use all names that are short, no spaces and pure alphanumeric.
Fixing names is important part of this.
But the latest firmware 7.6.4 is also troublesome. I would downgrade it to 7.6.1 and factory reset before you start that process.
Any TC older than 3years may have hardware issues.. a Gen3, A1355 may need a replacement and certainly anything older does.
Drivers in windows for wireless are problematic as well..
Certainly start there and see how it goes.

Problem playing itunes over wireless network

I have a problem with folders syncing between my computer and my audio system. I have a PC and my operating system is MS Vista. The computer has the latest version of itunes on it.
I can play music from my PC thru my wireless network on my audio system, but not itunes. When I look at the file hiarchy on my TV through my Bluray (an LG), the files below music do not match the hiarchy on my computer. The server is recognized and other music and picture files are there and they work fine through what the software calls Homelink. But beneath the Music folder the itunes folder does not show as it does on my computer screen. I have actuated file sharing for itunes on the computer.
I chatted with LG help and they said that I can't make itunes work because itunes does not have something called DINA. I have never heard of this and question this answer.
I would think there is a way to make this work down to the itunes playlist level. If I can't I will have to burn my playlist to a CD and play it in the Bluray and I had rather not have to do that.
Any help anyone can give me will be greatly appreciate. The path that I have itunes set on on the computer is: Server/Music/itunes.

Can you marked this thread as Finished then please ?
10:35 PM Sunday; January 25, 2009

LaserJet M1120n MFP - Problems with printing over Wireless Network.

Similar Messages

Maybe you are looking for