LaserJet m1212nf networking - how to get the printer seen in a network?
I have a LaserJet Pro M1212nf, which does not have wireless capability. I am on a desktop PC, Windows 7, and am hooked up with a USB cable from the computer to the printer. There are no other Windows 7 computers on this network, so until now I have not needed this capability.
I have spent an hour trying to figure out how to be able to print from my iPad using Airprint, which does come with this printer.
The printer is shared, which I thought was enough, but apparently not. I have found instructions on using a wireless printer, which this is not, and using an ethernet connection, which I am not, but nothing on direct USB connection. I have found instructions on changing from a USB connection to an ethernet connection - is this what I need to do? I'm hoping someone can help with this.
Do I need to change from USB to ethernet to be able to be seen on the computer network and by the iPad? There has to be a way to do this, but I'm stumped.
Thank you.
This question was solved.
View Solution.
You should be able to install the printer with the normal software using an Ethernet connection to your router.
To start out sounds like this is a driver issue. I want to start with being sure that the removal of the software and reinstallation happened in the best possible fashion. I want you to follow my steps so I can be sure that we are both starting on the same page.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
find and install the FULL FEATURE SOFTWARE if it is available :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3965849
Install that and let me know the result!
Have a great day!
-Spencer
PS this software should include the option of installing via USB and then converting it to wireless via the USB>> Wireless setup wizard.
Similar Messages
-
How to Get the Print of General Ledger with Opening balances
Hi Friends.
How can I get the print out of G.Ledger with all line item transactions and opening balances in a company code?
Please explain.
Regards.
Srinihi
for line item-
goto s_alr_87012282 and select menu bar "list">print
for g/l statement
goto s_alr_87012332 same step above
rgs -
How to get the system info in a network
Hi to all.
can any one tell me how to get the system related,like system name and logged user ,info in a network using java...
thnx in advance,
ashokThere is quite a bit of data that is stored in the System Properties. Run this little test app and it'll display all of the System Properties, what you are looking for may be contained in there:
public class Test {
public static void main(String[] args) {
System.getProperties().list(System.out);
} -
Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John LeeLooking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page. -
How to get the printer button to appear
The buttons on my printer should say scan, copy & print.
They are now saying scan, copy & copy. how do I get the print button back, as I cannot printHi,
What is the exact printer model? is it the HP Photosmart C4385?
The following model does not provide any fax capabilities as you may find by its datasheet below:
http://cdn.cnetcontent.com/b6/14/b6144c8e-0a16-4ce3-a66d-2eb03e86f4d9.pdf
If I misunderstood your pritner model, please clarify the exact model.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
I have all the current installations according to my update tab. How do I get AirPrint?
Do you have an AirPrint printer connected to your network? See here: http://support.apple.com/kb/HT4356
-
How to get the print logs to appear in the application logs folder of windows server 2008 r2
Dear All,
I am a SIEM professional at an IT firm. i am facing a problem. My SIEM solution has an agent for windows. this agent reads only logs from the application, security and system folder of windows event viewer. In server 2008 r2 the printer logs are clustered
in and application and services/microsoft/windows/print services folder. The requirement of my management is that the siem solution should also be able to montior compliance of print policies. that can only be done once the the print logs are viewable in any
of the three event vieweer folders i.e application, system.security. how can i configure windows to make its print logs visible in any of these three folders ?this may be helpful...
http://social.technet.microsoft.com/Forums/windowsserver/en-US/fe8892cc-fb6d-49c7-8b2d-c1f17df8e085/2008-r2-use-advanced-security-audit-policy-to-log-print-jobs?forum=winserverprint
or post here...
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverprint
Best,
Howtoto -
Hi all
After the output is displayed with ALV ,I have the following requirement
A status field will be found at the end of the row and will reflect the current status of the print documents. After printing occurs, the screen should refresh and processing status reflected to show post-print status. The user will then be able to see what documents printed immediately. Any documents that did not successfully print will need to be reprinted through the .PDF files stored in the shared directory.
I am unable to proceed further
Pointers would be helpful
Thanks in advance
Regards
NikhilNikhil,
Try going through this table TSP02L.It may give you some lead.
As well as go to DD02T table and give as spool in DDTEXT field so that you will be able to see all the spool related tables.
K.Kiran. -
How to get the print the page numbers in a report based on another report
Hi
I have a requirement in which i need to print the page number based on another report
example my request set has 3 reports
1 report prints 1- 100 pages
2 report page number should start from 101 - 110
3 report 111-
Can anyone please let me how to achieve this?
Thx in advance
KumarHi,
You can create all the three report queries in one report creating separate query in the data model and then create the layout in proper sequence as required.
If you want to use separate reports only you might try the following:
In the first report use the after-report trigger and save the total no of pages in a table as a record.
In the second report fetch the value stored in the table and add it to the Page No. to obtain the Page No for second report.
Also in the second report use the after-report trigger and update the record created in first record to total no of pages + total no of pages of the first report.
In the third report fetch the value stored in the table and add it to the Page No. to obtain the Page No for third report.
Do remember to delete the record created in the table after-report trigger of the third report.
Hope this helps.
Best Regards
Arif Khadas -
I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.
Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print -
How do I get the printer to work with AirPort?
I have had my printer connected via USB cable to the AirPort for a while, but recently when I had to disconnect the printer for some home improvement, I ended up with problems.
Upon reconnecting the printer to the AirPort, I started receiving this message:
USB Power
A device connected to this Apple Wi-Fi base station's USB port requires more power than this Apple Wi-Fi base station can provide. Plug the device into a power supply if possible, or connect it to a powered USB hub.
My printer is connected to a power source, but I still cannot print to it. I can see the printer when I send something to be printed, but it will not actually print.
Does anyone have any ideas on how to get my printer to work again?Thanks for the detail. The dash separates the "main" and "guest" network.
There are a number of settings that are 2.4 GHz on both networks. The only time the dash separates 5 GHz and 2.4 GHz is on the last 3 settings.
Since the printer specifications available on the HP site show it is a b/g device only, I suspect that the printer does not like the current guest setting of 802.11 b/g/n you are currently using, which is also what it would be if the AEBS was set on Automatic.
Try the following setting:
802.11n only 5 GHz - 802.11 b/g
It's really the only choice that would keep the 5 GHz that you want on the "main" network and possibly allow the printer to connect. Unfortunately, the optimal choice for range and speed is not the setting that you may need to work with the printer.
If the printer still won't connect, I would call it a day and when it comes time for a new printer, look first for an ethernet device or at least an "n" device that will handle 5 GHz if you want a wireless printer. The advantage of an ethernet printer would be that it would also work over your wireless.
Please post back on your findings. -
I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?
You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.
-
How to get the PO no in the smart form and in the print program from ME23N
hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa -
How do I get the printer driver for a hp officejet 6500 e709n?
How do I get the printer driver for a hp officejet 6500 e709n? When I add the printer, Apple says the software is not available and to contact the manufacturer. HP says it is available from Apple.
Hi Robmtu,
You can find the direct download here. -
How to lock the Printer of LaserJet Pro 500 Color MFP m570dw
how to lock the Printer of LaserJet Pro 500 Color MFP m570dw
You can set a control panel lock security level and password for your HP LaserJet series printer. To lock your printer, follow below link:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl03612
Maybe you are looking for
-
Drivers for HP laserjet 1020 printer for Macbook Pro OS 10.10.1?
Like to install drivers in OS 10.10.1 for HP laserjet 1020 printer. When checking on App Store updates I cannot find anything. Where do I find the driver? Thank you
-
For Outlook 2011 for mac while relying outlook hanging problem
Pl let me know the solution for given below problem While replying to my emails some times it works fine but most of the times my screen hangs I m not able to type anything on it. It shows very thin (light) line on left side. When I create a new emai
-
I have an iphone 5 and and ipad3 which I wish to sync. I went to Apple store and tech unable to do this - wasn't happening and said there was an icloud problem and to go on line to find out, as they didn't do icloud issues in the store. I've backed u
-
Upgrade from Premiere CS6 to CC
I want to get back to learning Premiere, but I see there is now Premiere CC. I don't see it in my Adobe Application Manager. What should I do?
-
Amount in Local Currency of documents of material (mov 251)
Hello Gurus, We have a problem in the Amount in Local Currency of documents of material (mov 251), resulting from the idoc WPUUMS01. When is the posting date before the current period. example: Material X August Moving Price 150u20AC >>Total Stock