Laserjet m1217 nfw for window 10

Yesterday, I installed Windows 10 and I can no longer print anything with my printer. I tried Scan Doctor and HP Support Assistant, nothing seems to resolve the issue. Any suggestions?Thanks

Hi,
Your peinter in on the following list:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175#N34318
and you can download driver for Windows 8.1 from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=4075...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Searching where to get driver for HP laserjet M1217 nfw MFP Windows 8.1

I've been trying for approx. 2 weeks....
My printer works ok on my laptop W7 no problem. I just bought this HP ENVY 700-249 PC series.
It copies the test pages, but that's all. It won't copy regurlar printing.
I hope somebody can help me with this.
Spoiler (Highlight to read)

Hi,
Your peinter in on the following list:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175#N34318
and you can download driver for Windows 8.1 from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=4075...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp LaserJet M1217 nfw MFP won't allow me to setup wireless...

I am trying to setup a newly purchased, refurbished hp LaserJet M1217 nfw MFP so that I can print wirelessly, but it isn't giving me the option to do it. I started the process trying to follow the directions on a Windows 8 (hiss!!!) machine. The computer recognized that the printer (or something) was plugged in, but didn't start up automatically and I had to insert the CD into the drive to start the setup. When I chose the option to configure for a new wireless network, the software told me to connect the printer to the computer....but it was already connected. I chalked it up to Windows 8 being the devil and installed the printer on my wife's computer, still running Windows 7. I ran downstairs to grab the rest of the documentation after starting the configuration process and when I got back, the thing was installed....but only on my wife's computer. I can't figure out how to get the printer to be accessible wirelessly from other computers and am hoping to get more help. I tried using the CD to configure the printer, but got the same message regarding connecting the printer when it was already connected. Any help would make me hate this printer less and possibly not send it back to get another Epson printer (Which took almost no time to set up for wireless and was perfect....until my wife broke it). Thanks a lot...
OGDEN

Just as an add on: Does this thing even have functionality as a scanner? While it makes copies (I tried it out), if it can just be used as a scanner, there is no documentation and nowhere that I can find on the computer to use such a function. What a terrible product. No information available. Doesn't appear to be all that useful. On a scale of 1 to 10, I'm giving it a -3.65 right now. Someone from HP better get a reply of some sort to me soon or the thing goes back in the box and Epson gets the money instead...

Laserjet m1217 nfw stops 1/4 int 2nd page scan of multi page doc

I have a Laserjet M1217 nfw all- in - one .
laserjet m1217 nfw stops 1/4 into 2nd page scan of multi page doc
error says that adf ran out of paper.. there is still paper in the scanner part way through the rollers
I have fixed problems with the scan not starting until page in a centimeter in but dont remember how i fixed it
susspect problem may be same

Hi @pwyckoff ,
I see that you are experiencing issues scanning from the ADF. The paper isn't being recognized. I would like to help you out today.
It might be a paper sensor or hardware issue with the printer.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Here is a document for cleaning the ADF rollers and the separator pad.
'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o...
Please call our technical support at 800-474-6836 if the issue continues. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

DRIVERS FOR HP LASERJET 1005 SERIES FOR WINDOWS 8.1 64 BIT

Hello!
When I can get drivers for hp laserjet 1005 series for windows 8.1 64 BIT?
My printer work perfect and i would not chance it!
Is anny solution there?
Thank you for your answer.

Hi, the 1005 Laserjet is not supported in Windows 8/8.1, see this link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7?

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7 64bit? It must be the Windows 7 driver of Scanto.msi. Thank you for your support.
This question was solved.
View Solution.

Hi,
Unfortunately any HP Software component (HP Toolbox, HP Scan, etc.) for this product support 32-bit envoirnment only.
As you may find by the User Guide, only basic Print and Scan drivers provided for 64-bit (Page 14):
http://h10032.www1.hp.com/ctg/Manual/c01072750.pdf
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Laserjet 1010 drivers for windows 8

Hi sir,
I have printer hp laserjet 1010 i need drivers for windows 8 please help me i can't find that drivers in hp website.
Regards,
Ali

Hi Ali,
I am sorry to inform you, the printer is not supported on Windows 8.
You may find this information listed below:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=3...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Laserjet 1300 Driver for Windows 7 64 Bits

Come on HP - I need the driver for Windows 7 64 bits for my HP Laserjet 1300 series.
I installed a generic driver which works OK for some applications.
But when using my Stenograph application the box that should be printed
around the text on the printed page is NOT correct: I only see the top and left side of the box shifted by 3 inches.

rainbowdog97 wrote:
Thanks very much for replying to my message. I got PCL 5 from both places -- from the Windows Update list and from the HP website. If it helps, at the hp website it is at:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=238322&p...
You can get to it through www.hp.com/go/windows7, where I also got PCL6.
I have a lenovo thinkpad x300, and connect to the LJ1300 with a USB. I installed PCL5, for example, and tried to print a simple text. But my printer does not respond (the light doesn't start to blink), and when I use the Print function, it gives me a message that indicates "error, 1 document".
I will be off of my printer for a couple of weeks but want to be up and running soon. I had hoped installation of Windows 7 wouldn't be dramatic.
Thanks once again.
The links you cite take you to a page where there are links to:
HP Universal Print Driver for Windows PCL5 x64
HP Universal Print Driver for Windows PCL6 x64
HP Universal Print Driver for Windows PostScript x64
As the name suggests, those drivers are intended to substitute for the "real" driver that is specific to a given printer. They primarily are intended for use where a network administrator is responsible for a variety of HP printers on a single network. See http://h20338.www2.hp.com/Hpsub/cache/343033-0-0-225-121.html Personally, I found the "Universal Print Driver" impossible to install and configure. Congratulations on installing it -- even if it doesn't work.
On the same page that you linked to, there is a link under the heading "Driver" that leads to "Product Support for Windows 7." That link basically leads nowhere useful for Windows 7. The conclusion that you're led to by these pages is that the only choice for Windows 7 is one of the Universal Print Drivers. This conclusion is erroneous.
I can't reconstruct how I found it, but if you go to the link in my previous post (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...) you'll get to an HP support page for using HP printers with Win 7. Essentially, this page divides various HP printers into 6 categories and describes your options for each category:
HP and Windows 7 printer driver options available for the selected product
HP print driver available
Windows 7 print driver available
HP LaserJet AIO/MFP product options
Product will be supported
Selected product is not supported in Windows 7
The Laserjet 1300 is listed as a Category 3, which means that a driver specific to this model is built-in to Windows 7. This is not the Universal Print Driver. The catch is that the driver for the Laserjet 1300 isn't available in Windows 7 out-of-the-box (at least, that's what happened in my installation). It only shows up if you permit Windows Update to update the list of built-in printer drivers.
I suggest that you completely uninstall your LJ1300. Disconnect the LJ1300. Then, right click on its icon in Printers and Devices and select "Remove Device." Then click on any other printer listed and then click on "Print server properties" in the menu bar. Click on the Drivers tab and Remove the Universal Print Driver (or whatever else looks like it's related to the LJ1300. Uninstall anything to do with the Universal Print Driver from Control Panel > Programs > Uninstall a program.
Now, you can take one of two approaches:
What I did was just plug the printer in and turn it on. If you've managed at some point to update the list of built-in printers, Windows should just identify and install the printer like any other USB device. Otherwise, you should get a popup asking you to give permission to search the web for a driver. Grant the permission. Windows will find the correct driver and install the printer.
Alternatively, go to Devices and Printers and start the Add Printer wizard. Tell it you're installing a local printer to LPT1. You'll get to the list of built-in printer drivers. Select HP in the left pane and scroll through the right pane. If you find the PCL5 driver for the Laserjet 1300, cancel the process and then add the printer as in the paragraph above. If you don't find an entry for the Laserjet 1300, click the Windows Update button. After a couple of minutes, the process will be finished, and now when you look there will be the PCL5 driver for the Laserjet 1300. Cancel the process and add the printer as in the paragraph above.
Good luck.

LASERJET M1217 nfw MFP urgent help plz

HAY GUYS, NEED URGENT HELP!!!!!!!!!
My printer M1217 nfw MFP had a problem with the scanner and it was fixed bu updating the firmware and the scanner works fine and offcourse i printed the config. report befor updating the firmware , the problem is that i lost the report and i cant config. the fax or the wirless connection . any help plz guys

kelsaeed wrote:
HAY GUYS, NEED URGENT HELP!!!!!!!!!
My printer M1217 nfw MFP had a problem with the scanner and it was fixed bu updating the firmware and the scanner works fine and offcourse i printed the config. report befor updating the firmware , the problem is that i lost the report and i cant config. the fax or the wirless connection . any help plz guys

HP Laserjet 4 drivers for Windows 7

Tried plug and play and no luck. Tried downloading the driver from Windows 7 and it wouldn't work and seemed to cause problem with the operation of the computer so I removed the driver. Tried the HP auto detection and it's not seeing it. HP support said that I may have to use a generic driver but I have no idea where to start. Any ideas? Thanks.

Hi,
Since Laserjet 1005 is a old product the drivers are not available, refer link below for more options.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?sp4ts.oid=240...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Hp LaserJet 1005: drivers for Windows 7 64bits

Hi,
I recently reinstalled my windows 7 x64 Bit operating system. I tried again installing my LaserJet 1005 (not M1005), but it's not possible. I tried everything but I am not able to install the printer. Its very frustrating since I spent so much for the printer and windows 7 only to find they are not compatible. Please help.

Hi,
Since Laserjet 1005 is a old product the drivers are not available, refer link below for more options.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?sp4ts.oid=240...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

HP LaserJet 1005 driver for Windows 8.1 x64

Hello,
I'm unable to install the HP LaserJet 1005 series driver on my Windows 8.1 x64. Here is what I've done so far:
- downloaded ljP1000_P1500-HB-pnp-win64-en.exe
- started the installer program
- it successfully extracted installation data into C:\Program Files\HP\HP LaserJet P1000_P1500 Series
- (the printer's USB cable is not yet connected)
- A pop up window appears: "Waiting for user to connect the device."
- I connect the USB cable to the computer. The printer is turned on. (The USB cable is OK - verified on a different PC)
- However, the installer is unable to detect the connected printer. The following messages are reapeatedly written into the installer's log file:
[ 4- 6-2014 14:35:21:085]- LOG(8F0): IsNewDeviceConnected(vidpidList with 6 elements)
[ 4- 6-2014 14:35:21:153]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3D17)
[ 4- 6-2014 14:35:21:220]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:287]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4817)
[ 4- 6-2014 14:35:21:354]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:423]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4917)
[ 4- 6-2014 14:35:21:492]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:559]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3E17)
[ 4- 6-2014 14:35:21:625]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:692]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3F17)
[ 4- 6-2014 14:35:21:760]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:828]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4017)
[ 4- 6-2014 14:35:21:895]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
- note that after connecting the printer's USB, the printer appeared in the Devices and Printers Windows view. However, when I click on Properties and Driver -> Hardware I get that no drivers have been loaded for it.
It looks like the program cannot find the connected printer it this is causing the failure. Here is a download link to the full log file: log.
I've also checked the following two threads which adress similar problems, but there is no workaround in there for my specific problem:
- HP LaserJet p1005 windows 8 driver ?
- Windows 8 driver for LaserJet P1005 printer?
Please advice on how to proceed in this situation. Please let me know if you need further information.
Best regards,
Atanas

Hello Shindov,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP LaserJet M1217 nfw MFP duplex printing mac

This printer prints duplex manually. Is there any way (as there is in Windows) to set printing to duplex so alternating pages print on one side and then paper is reinserted to complete duplex printing. Duplex option is grayed out in Word and other programs. Doing the job completely manually would be annoying.
Thanks to anyone who can help!

Hi,
Try following the steps below and let me know if that helps:
From Word, open the Print dialog.
Click the Copies & Pages dropdown menu and select Layout.
Set Two-Sided as Lpng-Edge binding and click on Print.
If you cannot see the exact options, go to Printers & Scanners and click the Plus sign.
Select the M1217 printer and then click the Use drop down menu.
Be sure to select the printer model rather than the default AirPrint option and check for any difference.
Please let me know of any issue,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Laserjet 4200 drivers for Windows 7 64bit

ok...ive upgraded to Windows 7 64bit to test on our network and come to find HP is lacking on the drivers for my laserjet!!!
I need a solution for this.
thank you

In Windows 7 Prof 64 bit I got my HP 4200DTN to work kind of. In Windows install a network printer, have it look for the driver in Windows 7 prof 64 bit. Now with that said it will make it print, duplex BUT if you have an envelope feeder like I do you are SOL, THANKS TO HP. Their solutions is to buy one of their cheap Chinese printers. I will not do that because the HP 4200DTN will print and does a good job in my network. Before I buy one of their cheap Chinese piece of crap I will get rid of Windows. Still trying to find a work around. The HP printer driver web page has a Universal Printer Driver for the HP 4200 but a lot of features are not supported. Tray 1 envelope feeder ( no support ) you can take the feeder off and feed tray 1 by hand to print envelopes HANDY!!! Just like starting your car with a crank!!! Would not hurt HP to provide drivers for the HP4200DTN, with the envelope feeder. They are so busy trying to SELL, SELL, SELL the new Chinese cheap crap. HP had a problem with their DeskJets in the 90's, paper feed rollers and gears broke. They talked me into a HP 8600Pro Premium, going to send it back. I am going to try my hand at fixing my HP OfficeJet 7310 All-In-One that quit working. It has been a good printer since purchase 6 years ago. I puchased a parts machine today. With any kind of luck I will have the needed parts to make my HP 7310 live. Don't need their cheap Chinese Junk. They don't want to have the service they used to provide. Spend all day on the phone and get transfered all over the world and back again, no help. Sick of it!

Hp laserjet 1000 series for windows 7

friend, I had a question for you, I have an HP LaserJet 1000 printer series but now I get a new computer with Windows 7, but do I not found hp 1000 printer drivers, pls send me the link or drivers ready

Yes - you can use the Laserjet 1000 with Windows 7. (I have two Windows 7 PCs printing to my LJ 1000).
Case 1 - (Easiest case) If your Windows 7 installation is 32-bit (How to check this)
Solution: Provided by user jriv9 in this discussion
use HP LJ1000 XP HostBased Driver
Just installed it and it works perfectly.
1. exe extracts to a directory of your choice.
2. right click on printer -> properties -> update driver
3. select to search in a specific location and select dir from step one.
Case 2 - If your Windows 7 is 64-bit and you have another PC on your network running Windows 32-bit (XP, Vista or 7)
Solution provided by user Los15 on this forum page. I have tried this and it works. I had to make one change - the port name had to be \\Computer Name\hp Laserjet 1000 DOS
Case 3 - If your Windows 7 is 64-bit and you have no other PC.
You can install the XP driver in XP Mode, and then install the XP driver as for a 32-bit machine.
Solution given by user erpp on this forum page.
Alternative
On same forum page as the XP Mode solution, another solution is given, using another piece of software called PDF Creator.
I'd just like to add my thanks to everyone who has contributed those solutions above. The LJ 1000 is a marvellous workhorse of a printer - the engineers who built it did a good job. It's too bad HP didn't follow their lead and produce 64-bit drivers.

Laserjet m1217 nfw for window 10

Similar Messages

Maybe you are looking for