Laserjet m276nw won't go into eco mode

Hi all,
For some reason my new printer won't go into eco mode. I've doubled checked the settings and even though it's idle for days the touch console is always on and it never enters sleep mode.
Any idea how to fix this? I've checked the settings via the Web interface and the touch console and they both have this mode enabled. I'm afraid if this keeps up it'll burn in the console UI and use a lot of electricity.
Thanks.

Hi @Mkakers,
I understand that you are having issues with the printer not going into sleep mode. I would like to help you resolve this issue.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
I have provided the menus for the sleep modes, just to double check the settings again. This information was provided by the manual on page 139. LASERJET PRO 200 COLOR MFP.
Set the sleep delay:
1. From the Home screen, touch the Setup button.
2. Open the following menus:
● System Setup
● Energy Settings
● Sleep Delay
3. Select the time for the sleep delay.
NOTE: The default value is 15 minutes.
Set the Auto Power Down delay:
1. From the Home screen, touch the Setup button.
2. Open the following menus:
● System Setup
● Energy Settings
● Auto Power Down
● Power Down Delay
Update the printer's firmware if the issue continues. HP LaserJet Pro 200 color MFP M276nw Drivers.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

My ipod won't go into disk mode

i've tried and tried and it won't go into disk mode. it shows an apple then a folder with the ! and when plugged into the computer sometimes it'll say don't disconnnect for about 10 seconds and then it'll go back to the apple.
also it sounds as though the drive is stuck in a loop; a weird repetitive whirring sound when i hold it up to my ear.

If you can't get it into disk mode and restore the iPod it most likely needs service, especially with that noise it's making.
Service request.

HT201263 What if my ipod touch won't go into recovery mode because it is pw locked?

What if my ipod touch won't go into recovery mode because it is pw locked?

Go into Recovery Mode per the instructions here.

My iPod classic won't go into disk mode

I have an iPod Classic (120GB) here. When I turn it on, it gives me a screen with the Apple logo first and after a few seconds a screen with a red circle, a cross in the circle and the text: www.apple.com/support/ipod . I followed all the steps on that page, however my iPod won't go into disk mode. The iPod is not seen by my iMac and iTunes. What to do?

See Here
iPod doesn't appear in iTunes
From Troubleshooting Here
http://www.apple.com/support/ipodclassic/
iPod issues? Try these five steps first: Reset, Retry, Restart, Reinstall, Restore.

My iPad 2 won't go into sleep mode or let me shut it off, any help?

My iPad 2 won't go into sleep mode or let me shut it off, any help?

Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

Yosemite install won't boot into any mode

Really sorry if this has been covered before but I spent a good time searching and couldn't find any existing posts with symptoms to the same extent.
I've got a 2008 iMac 27" and have the latest version of Yosemite installed (10.10.1 I guess). I upgraded to Yosemite probably 2-3 weeks ago and everything has been fine. Then yesterday when I woke it up from sleep it effectively froze - no mouse or keyboard input. So I did a reset by holding down the power button, and when I turned it back on it went to the apple logo boot screen with a progress bar that gets to just below 50% and stuck there. I've restarted quite a few times and left it running up to six hours and still it doesn't boot.
Now this is similar to the issue here - OSX Yosemite won't boot after install on mid 2010 iMac - except I am unable to boot into any mode, and the only startup keys accepted are the P-RAM reset. It won't boot into recovery mode (command+R), safe mode (Shift), startup drive select mode (Option), diagnostics mode (D)... nothing
I've booked into a Genius Bar appointment when the Apple stores reopen after Christmas, but I'm hoping that is a last resort and to be honest I'm unsure what they can do for me except to say it's a lost cause.
Are there any suggestions on what could be happening and why it's ignoring the startup modes? I would have suggested the keyboard not being recognised except the P-RAM command works perfectly, so it's obviously seeing it. I'm a little scared that because it won't let me into a boot device menu (which must operate independent of any HDD) then there's an issue ahead of that in the boot sequence, so possibly the motherboard is shot...
Sorry if I seem a little desperate. I had a HDD crash two years ago to the day (great Christmas present Apple) and it kind of puts a dampener on things.
Happy holidays and I'm grateful for any help that anyone can offer

Hello there, semerton.
Great job on troubleshooting the issue on your own so far. The following Knowledge Base aritcle offers some additional steps to try for resolving your issue:
Mac OS X: Gray screen appears during startup - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Help! my ipod wont do anything. It wont charge, turn on, the apple icon wont appear, it won't go into reset mode or dfu mode. Itunes wont recognize it, no buttons work. It did this suddenly with no warning. What do i do? :(

My ipod won't do anything. it wont charge, turn on, the apple icon wont appear, it won't go into reset mode or dfu mode. Itunes wont recognize it, and no buttons work. The screen is black, and nothing i try will turn it on or give any sort of hope. It did this suddenly without any warning... what do i do? is there a way for me to fix it or is it beyond help?

Hello, pravin729.
Thank you for visiting Apple Support Communities.
I understand that your iPod touch will not turn on. I would start with going through the troubleshooting steps in the article below.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
http://support.apple.com/en-us/HT201412
Cheers,
Jason H.

OS X Lion 10.8.2 won't boot into recovery mode

Help! OS X Lion 10.8.2 won't boot into recovery mode, I get a grey screen, the apple icon and the spinning symbol...Does anyone have any suggestions?
Have a MacBook Pro (2009) and had no problems until upgrading to LIon from Snow Leopard... thanks!

Hi there - thanks very much for your suggestion, it did reboot eventually but took a long time to get there.
I've have run Disk Utility. After Verifying the disk it said it needed Repairing - so tried doing that and got the message " Error: Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files" I have got Time Machine but haven't backed-up since Dec 12...Can I use "Restore" to copy the MBP HD to an external HD and then re-install Lion?

TS3048 bluetooth keyboard won't go into discovery mode

Is my keyboard bad? It just stopped working. Fresh batteries. Won't go into discovery mode to pair with mac mini

Does the light on the KB light/blink?

HT1430 ipad won't go into sleep mode

ipad won't go into sleep mode, stays lite all night, litening to radio on it, but the screen used to go dark.

Check Settings>General>Auto Lock and see what you have it set for.

Won't go into sleep mode

won't go into sleep mode; other functions work. Eventually - maybe 10 mn - it will get to screensaver.
Ideas?
thanks

won't go into sleep mode; other functions work. Eventually - maybe 10 mn - it will get to screensaver.
Ideas?
thanks

IPod Nano 5th Gen is stuck on the Apple Logo, won't go into disk mode and won't connect to computer.

My iPod Nano 5th Generation won't turn on; I've held down "Menu" and the center button which makes the Apple logo come up, then it just stays on that. I've followed steps I've seen on here trying to get it into disk mode by holding down the "Play/Pause" button and the center button immediately after the Apple Logo appears but it doesn't respond to that at all. I've charged it and upgraded my iTunes but nothing seems to do anything to it. When I plug it into my computer there is nothing to say it's plugged in on iTunes or My computer or anything. It's driving me crazy and I'm hoping there's a way I can fix it without it having to be sent off.
Any advice would be cracking!
Thanks,
Tilda

Did you ever get this resolved? I'm having the same problem and can't figure it out.

6th gen ipod nano has white screen and won't go into disc mode

My ipod nano has a white screen - it will play music, and it is recognized by itunes. It won't enter disc mode. I can't seem to find any other helpful steps to follow online other than put it into disc mode and restore it via itunes. When I attempt to put it into disc mode holding power/Vol down together the screen will turn back, but when I then hold down Vol down/Vol up together while the screen is dark it just goes back to white screen. I did plug it into the computer and restore it via itunes, and the screen is still white. Any ideas? Thanks!

Hi LizS5,
It sounds as if you have already done much of the troubleshooting suggested in this article, but I would suggest you work through it in order to get your iPod nano back up and running -
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Specifically -
Try putting the iPod into disk mode:
Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
While the device is in disk mode, sync it to iTunes and try to restore.
And if the issue is not resolved -
My issue is still not resolved. What do I do next?
For information on servicing your iPod, go to the iPod Service FAQ
Thanks for using Apple Support Communities.
Best,
Brett L

Won't boot into safe mode

My 2012 iMac 27" was randomly rebooting itself, while in Sleep. I assumed this was due to the cheap 32 GB memory I bought, but before I could change it back to the original memory, to test, the Mac booted into Safe Mode (I assume - a progress bar showing at the bottom of the boot screen, below the Apple logo), and did not get further than a half the way, and then shut down. I swapped the memory to the original 8GB. I tried booting again, no buttons held down, as then it wouldn't get further than a quarter of the way. Further attempts to boot do not work, even when holding down Option to choose the boot disk, pressing Shift for Safe Mode, or Option-S for Single User Mode. I assume it's trying to boot in Safe Mode, but failing?
I also tried using a good Mac with the bad Mac as the Target Disk boot mode - the good Mac does not see the bad Mac...
I have an external DVD drive, but that isn't an option as I can't go into boot drive select mode. What are my options, apart from sending the iMac back?

Booting into the Recovery HD should allow you to effect repairs - that's the point of it, so it's a bit concerning that it won't allow you to. The Recovery HD is a partition on the internal drive that should allow you to effect repairs to the Macintosh HD, albeit part of the same physical disk.
I'm no expert, but I'd be concerned that the hard disk is on the way out. Do you have backup of everything - Time Machine or a bootable clone, perhaps?
Maybe have another try with Command+r. If it fails I'm not sure what would be the best next step - it depends if you have a full and up-to-date backup of your disk so that you can restore.
One of the options of the Recovery HD is to allow you to re-install the OS, which won't delete your data.
The more extreme step would be Internet Recovery which would involve erasing everything and re-installing via the internet.
Worth reading this carefully before proceeding: http://support.apple.com/kb/HT4718
Disk Warrior from Alsoft (not cheap) is another possibility for recovering damaged disks, although it's not a guaranteed solution.

Won't go into disk mode

My ipod has the sad face on it, but it also indicates low battery. It won't charge, so I can't put it into disk mode to fix it. Do I need a new battery??

Problem Solved.

Laserjet m276nw won't go into eco mode

Similar Messages

Maybe you are looking for