LaserJet P1006 booklet printing problem

OS: Windows XP SP3
Connection type: USB
I'm trying to print a booklet with "Left Edge Binding". The output pages are not centered (they are shifted to the right, no space between pages). I've tested it by printing MS Word document with grey background and zero margins. If I print it manually ("2 pages per sheet") everything is correct. Is it a driver error?

I am having similar problem with C309C. Front page looks good, but the back page is not centered. Thank you.

Similar Messages

HP Color laserJet CM1015 MFP printing problem

Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

I have a HP Laserjet P2055dn booklet printing is not working anymore. Windows 7 64 bit

I used to do booklet printing on my HP P2055dn; a feature that I loved! Suddently thisfeature stopped and therefore I updated the driver but now it is gone for good.
Under printer properties I used to have "General Printing", "dublex", "Envelops", " Booklet" and "Defaults".but now there is only "General" and "Duplex" the rest is gone.!!!!!.
I am using Windows 7, 64 bit, Word 2010. Neither printer driver P2055dnUPS PC6 nor HP univerals PCL 6 works.
Please note that I still have all the printer properties (above) on my laptop, Win7, 64 bit Word 2007 (old printer driver).
I assume this has something to do with the compatability of Office 2010 AND the Printer driver. I could easily test this by updating the printer driver on my laptop but I am afraid to lose this feature there too. Any useful advice!!!!
Update: I installed the old printer driver and have all printer properties!! There is a problem with HP updated relased in July 2011 !!
Update: although the software shows the booklet prining and envelop option. Booklet prining is not working. So my quess is that the HP frimware update screwed everything up!!! So what do do now?

Hi,
Please update the printer driver with correct version and compatible with Windows version.
Then Open "Devices and Printers" and right click on "Printing Prefences"
Create new Printing Shotcuts as below.
Then go to the other tab Finishing and do exactly like the image.
Apply and Save.
Your Booklet printing and shotcuts is ready. now you can print.
Please let me know if this is being useful for you.

HP LaserJet P1006 not printing

Just connected my HP LaserJet P1006 to the USB port of my wireless router. When I tried to print my computer went on the Net to download the printer driver. I tried printing again. I got the print dialog box, selected the printer which was connected to my wireless router, and clicked on “Print” button. The HP printer app starts and reports that the page was completed but the printer just sat there with no output and no error message on the computer either. The printer works fine when I print from my MacBok Air. What am I missing?
1.HP LaserJet P1006
2. MacOSX 10.5.8
3. No error messages
4. Just installed printer
This question was solved.
View Solution.

What brand and model is the router?
It does sound like the issue is isolated to one Mac system since it works from the other.
Reset the Mac printing system exactly as outlined in this document from Apple.
Next, install the full featured driver from HP. This driver package includes support for OS X 10.5.
This should reset the printing system and remove any software that may be causing a conflict.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Brochure / booklet printing problem

Hi,
I have a problem with the booklet printing. I am german, so I hope you know what I mean
When I try to print a booklet I sometimes get the error message (translatet from german so maybe it's not the exact wording): "The active document uses multiple page sizes. "Print Booklet" can be used only for documents with common page size."
How can I solve this? All the pages are the same size (A5) but InDesign wont let me print it. The only way that worked for me is to make a new document and copy all the page content but that not a solution. This happens a lot so I'm tired of making new documents...
I hope you can help me.
thank you
Hans

Mr. Krone,
I am the “this DOV” that you refer to.
I never said “that its a non-issue for Adobe.” What I did give you was our position as to the best and most professional method of doing imposition because there are so many issues associated with both “booklet making” and imposition in general that this built-in, fairly hobbled feature simply can't handle correctly. Since the print booklet feature doesn't provide a PDF export feature, if you create PDF via it, it is by distillation of PostScript, a real crap shoot if your document has any transparency effects and/or color management.
If there is a bug (and I am not doubting for a minute that this thread notes some real bug or bugs), it should be reported to Adobe Tech Support for resolution. Neither I nor anyone else in this thread indicated that such a reported bug would be dismissed and not fixed by Adobe.
In terms of the parts of this thread associated with DTP and teaching, etc., I know of absolutely no word processor, layout program, or desktop publishing program (whatever that means) that offers any real support for imposition because, as previously stated, imposition is exceptionally device dependent. If you don't understand that, you are personally not in a position to diss our recommendations.
I will not stoop to the point of posting my résumé into this thread, but let's just say that (1) I've been in senior positions at Adobe for nearly 23 years, (2) have been in the computer and graphic arts industry for over 40 years, (3) currently am also serving as an industry research professor at the California Polytechnic University at San Luis Obispo in the Graphic Communications Department teaching publishing workflow as well as having taught classes at RIT and given many classes and presentations throughout the world, (4) am current chair of the ISO PDF/X standards committee, and finally (5) have the full support of Adobe executive management in posting here. Sorry you don't like my advice, but we stand behind it!
- Dov

HP Laserjet P1006 - GUI Print Options Problem

This printer works fine if I'm just printing with the default settings. However...
I want to be able to turn on EconoMode and turn down the Print Density to save on toner. Unfortunately, the driver is giving me one frustrating time. It looks like it works until I choose an option like 'Print Quality'.
What happens? I've uploaded a picture of what happens here: narkeeso.com/images/Picture%203.png
If you look the print options GUI jumps to the top left corner. No problem right? Just click on it... but NOOOOO you can't click on anything not even where it's suppose to be. It's as if that option doesn't exist.
I am using the latest driver off the HP site. Any help would be appreciated.
Message was edited by: Michael Narciso

printing was going fine and then after updating Office 2004, problem kept happening and then became unfixable when I upgraded to Leopard. Just got off phone with MS and they gave me a temporary fix... using key commands (command-P) will not get Word or Excel flies to print, but if you use the printer icon in the toolbar, it seems to work. However you can only print "all" pages, not a select range. MS said their engineers are working on it and hope to have an update to fix it so we can use command keys or selecting print from the "file" menu in each app. Hope this helps.

Booklet printing problems with Reader XI (version 11.0.06)

I created an 80 page 5.5" x 8.5" booklet using Word 2011 running under OSX 10.9.2 on a new 27" iMac. I then "printed" it to a PDF file. I then opened the PDF file in Reader XI and attempted to print it out using the "booklet" option as described at
http://helpx.adobe.com/acrobat/kb/print-booklets-acrobat-reader.html#main1_Reader_and_Acro bat_X .
I planned to manually duplex the booklet booklet since my HP Color Laserjet CP1518ni printer does not have automatic duplexing. The first sign that something was wrong came when I selected "Back side only" from the Booklet Subset pop-up menu. The numbers in the Sheets from boxes showed "Sheets from 1 to 10" when I obviously needed 20 sheets to print the booklet. Repeated attempts to manually change it to "Sheets from 1 to 20" failed. Each time I changed "10" to "20", it would flip back to "10" when I clicked the "Print" button.
I set the Booklet Subset to print only the even pages and checked the "Reverse" box as I have done to successfuly print thousands of manually duplexed pages before.
The printer only printed ten sheets. The first sheet (what should be the booklet's centerfold) had page 40 on the left side as it should, but 42 on the right (it should have been 41). The last of the ten sheets printed had page 4 on the left side (instead of the expected 2) and 78 on the right side (instead of the expected 79). Even though these were obviously messed up, I went on to print the front side of these sheets, selecting "normal". It printed Page 1 on the right side as expected, but printed page 79 (instead of the correct page 80) on the left.
Folding the ten sheets into a booklet revealed the really bizarre nature of the printing snafu. Page 1 was, as expected, on the front. Turning the first page open revealed pages 4 and 5. Turning the second page revealed Pabes 8 (left) and 9 (right). This pattern continued, printing two pages, then skipping two pages, right into the centerfold pages 40 (left) and 42 (right). The first page turn after the centerfold revealed pages 43 (left) and 46 (right). The next revealed 47 (left) and 50 (right).
I am at a complete loss of how to determine where the printing process went afoul. Printing the PDF file normally (one page per sheet one-sided) resulted in all pages being printed normally.
The really frustrating part of this entire experience is that I could find no place to report this "bug" to Adobe. If anyone can help me solve this printing dilemma, or put me in touch with someone at Adobe who could help, it would be greatly appreciated.
The booklet is due at the printer's tomorrow and the inability to print a proof is a real pain. Hope the printer can print this file as a booklet. I would be happy to send this file (125 Mb) to anyone who might help.

I arrived here looking for a solution! And while reading your post the penny dropped that I didn't have a serious problem. I have a booklet of 112 pages and all I needed to do was re-order the pages as printed so that 1 is followed by a sheet with 2 on the under-face but same side and so on. The pages had printed back to front and needed flipping. But then I have a duplex printer and maybe that makes a difference. Is it to do with your manual duplexing and the order that the second pass is presented to the printer. As my duplex sheets effectively needed flipping over each one I'm wondering if you can solve your problem with a little experimentation and re-ordering before your second pass.

Laserjet 2605dn color printing problem, Blue/green line on page.

I have an HP color laserjet 2605dn that has started to print a faint,thin blue/green line from top to bottom about 3 inches in from the entire right edge of every page. I ran the cleaning cycle with no change. Any suggestions on how to correct this?

I have very similar problem on my 2600n which is printing 2 vertical green lines very close together about 1.5 inches from left edge. All toners are in supply override mode with black toner reading: Estimated Pages Remaining 0
Color cartridges contain toner with 329 pp remaining according to supply status page.
Is this problem likely to disappear when toner cartridge(s) are replaced?

HP Laserjet 1020 Shared printer problem

Hello there I have here an HP Laserjet 1020 connected to one machine and shared to 3 others over the network. Initially the printer works fine. All 3 computers that share the printer are able to print, as well as the host of the printer. However give it 3 days to a week and all of a sudden the printer is no longer able to print. All shared computers and the host are able to see the printer, send a print job, but nothing happens. The print queue is empty as if the job was completed. Occasionally if the host of the printer is restarted a print job will execute but very rarely. The only way that I have been able to fix this problem is to delete the printer from all computers. Reinstall drivers and share the printer on the host machine and share the printer on the following 3 computers. This has become very time consuming as its been done 4 times over the last 3 weeks. If it helps the host machine and 2 computers run XPSp3 and the 4th computer uses win7. Any solution that will help fix this issue will be greatly appreciated. Thanks.

Hi @rajahp ,
I see by your post that the printer is printing distorted characters. Thanks for providing the screen shot. I can help you.
It looks like a issue with the toner or possible a hardware issue with the printer or fuser.
Inspect the toner cartridge for damage:
1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
2. Check the memory chip for damage.
3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
Fingerprints on the imaging drum can cause print-quality problems.
4. If you see any scratches, fingerprints, toner on the drum or other damage on the imaging drum, replace the toner.
5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
I have provided a document for cleaning inside the printer and running a cleaning page, resetting the printer and checking the driver settings. Resolving Print Quality Issues.
Try printing a document again.
Let me know the results.
What kind of paper are you using?
Try another type of paper to see if you have the same results.
Are you using Genuine HP Toner?
What is the toner level?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet 1606dn , network printing problem.

Hi all,
I have new HP Laserjet 1606dn. When I setup for USB printing, it can print fine. But when I setup this printer to be network printer, when I order to print 1 page, it always continue printing. I can';t stop printing. I have 5 printers for this model. When I setup another printers, it is still be the same. Anybody can give me the solution. Thank you very much.

I retried the installation from the driver after having cleaned previous installation and having unplugged the printer.
Same problem re-occured
Here the log containing the error
EDC): _PostProgressMessage hWnd=0x60206 msg=1125, param=13074
[11-19-2009 8:22:39:391]- LOG(EDC): Preinstalling inf C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:39:391]- LOG(820): IDLCProgressDlg:nCurrentProgressMsg()
[11-19-2009 8:22:39:391]- LOG(820): msg=Preinstalling the driver files ...
[11-19-2009 8:22:41:216]- LOG(EDC): SetupCopyOEMInf failed gle=2
[11-19-2009 8:22:41:216]- LOG(EDC): PreInstallDriverFiles()
[11-19-2009 8:22:41:216]- LOG(EDC): _PreInstallDriverFiles()
[11-19-2009 8:22:41:216]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:42:761]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
[11-19-2009 8:22:42:761]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
[11-19-2009 8:22:43:775]- LOG(EDC): _PreInstallDriverFiles()
[11-19-2009 8:22:43:775]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:45:194]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
[11-19-2009 8:22:45:194]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
[11-19-2009 8:22:45:194]- LOG(EDC): Diffx Preinstall FAILED, trying SetupCopyOEMInf: C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:45:194]- LOG(EDC): ProcessFailure(3) NEXT=0, BACK=1, CANCELED=2, FAILED=3
[11-19-2009 8:22:45:194]- LOG(EDC): _PostProgressMessage hWnd=0x60206 msg=1129, param=0
[11-19-2009 8:22:45:210]- LOG(EDC): InstallSequencer() step = 4
[11-19-2009 8:22:45:210]- LOG(820): IDLCProgressDlg:nStopCurrentProgress()
[11-19-2009 8:22:45:210]- LOG(EDC): --- PreInstallStep ---
After that he retries to install the driver, but inside the previous install directory.

LaserJet and InDesign printing problem

All of a sudden my CS6 InDesign will not print to LaserJet.

This is so odd. On this particular problem page, a couple of days ago I replaced the image 3 times and it still gave me a printer error. I copied the page from the 30-page doc onto a new, single page and still had the problem. I deleted the image and still had the problem. There are three text boxes and I deleted them one at a time and each time, all the way down to one text box, I was still having the problem. Tonight I go back to the original 30-page doc., replace the image, and the page printed out fine. Frustrating!

Windows 7 64-bit & HP LaserJet M1005 MFP Printing problem

I have installed the latest available drivers (as of 26rd October 09) for HP LJ M1005 MFP printer
on Windows 7 64-bit Enterprise. Printer connected over USB.
I can't print more than two pages from any application.
It stop printing after two pages and have a message on LED "Printing Document".
Nothing is in the print queue.
Printer well working on WinXP, Win2003, Win2008 x64.
Anyone else have this problem? Or even a solution?
Sorry for my bad English.

I retried the installation from the driver after having cleaned previous installation and having unplugged the printer.
Same problem re-occured
Here the log containing the error
EDC): _PostProgressMessage hWnd=0x60206 msg=1125, param=13074
[11-19-2009 8:22:39:391]- LOG(EDC): Preinstalling inf C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:39:391]- LOG(820): IDLCProgressDlg:nCurrentProgressMsg()
[11-19-2009 8:22:39:391]- LOG(820): msg=Preinstalling the driver files ...
[11-19-2009 8:22:41:216]- LOG(EDC): SetupCopyOEMInf failed gle=2
[11-19-2009 8:22:41:216]- LOG(EDC): PreInstallDriverFiles()
[11-19-2009 8:22:41:216]- LOG(EDC): _PreInstallDriverFiles()
[11-19-2009 8:22:41:216]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:42:761]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
[11-19-2009 8:22:42:761]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
[11-19-2009 8:22:43:775]- LOG(EDC): _PreInstallDriverFiles()
[11-19-2009 8:22:43:775]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:45:194]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
[11-19-2009 8:22:45:194]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
[11-19-2009 8:22:45:194]- LOG(EDC): Diffx Preinstall FAILED, trying SetupCopyOEMInf: C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:45:194]- LOG(EDC): ProcessFailure(3) NEXT=0, BACK=1, CANCELED=2, FAILED=3
[11-19-2009 8:22:45:194]- LOG(EDC): _PostProgressMessage hWnd=0x60206 msg=1129, param=0
[11-19-2009 8:22:45:210]- LOG(EDC): InstallSequencer() step = 4
[11-19-2009 8:22:45:210]- LOG(820): IDLCProgressDlg:nStopCurrentProgress()
[11-19-2009 8:22:45:210]- LOG(EDC): --- PreInstallStep ---
After that he retries to install the driver, but inside the previous install directory.

HP laserjet pro 1102w printer problem

When I have sent print order wirelessly, only the first page of the doc is printed and the printer gives error status, How can I solve this problem. Thanks

Thank you very much for your reply,
I have tried powering down the printer and the computer for a short period of time and attempting to print again?
the problem repeated.
I have tried also the HP PSdr, but no error found by it.
I am printing from an ACER laptop, using windows 7. the document is in PDF format.
I would be very grateful if you please try to solve this problem; (only the first page of the doc. is printed then the printer gives error status.)

Booklet printing problem

I have a booklet set up on half-letter sized pages that I want to make into an imposed PDF. In the Print Booklet preview, it looks correct. But when I make the PDF, the pages appear half the size that they should. I see two tiny pages on a letter-size sheet of paper.
I tried changing the page size and orientation in Print Settings, but I can't get it to come out right. Is the Print Booklet feature malfunctioning? Or am I just not figuring something out?

I tried the Dave Saunders script, but got a JavaScript error, #30477
Error String: Invalid value for parameter
'pageNumberStart' of event 'add'. Expected Long
Integer (1 - 999999), but received NaN.
Line: 95
Source: newSectio =
app.documents[0].sections.add({pageStart:app.docu
ments[0].pages[i], continueNumbering:false,
pageNumberStart:pageNo,
pageNumberStyle:origNumbering, marker:
origSection.marker, name: origSection.name});

Two Sided Booklet Printing Problems

When I print two-sided booklet, the first side prints OK; however, then I fold into booklet , the second side (center pages) are upside down. how can I get the pages to pring correctly on both sides?

Then use this script for CS3:
http://pdsassoc.com/downloads/Buildbooklet.zip
Then once you create your booklet, export to PDF. From acrobat you can print odd pages and even pages only. I *think* you may have to select print reverse order for the second pass since page one will be at the bottom of your pile when you reload paper for second pass. Do a test with a few sheets first.
If you're still stumped, you can click through my name to email me directly and I'll post a QT movie for you.

LaserJet P1006 booklet printing problem

Similar Messages

Maybe you are looking for