Laserjet P1006 does not print in windows 7 x64 even though the status of the printer is "printing"

HP LaserJet P1006
Windows 7 64-bit
No error message
No changes made to system, it never worked after installing Windows 7 64-bit
- printer properly installed and recognized as ready when plugged in
- when trying to print everything goes normal: document added in printer queue > printer status changes to printing
- but it just stays in "printing" for a few minutes and then it acts like it successfuly printed the document, showing to error, clearing the queue and going back to ready status
- and no page is being printed
- the printer harware works, because on other operating systems is has no problems (tested on two other computers): with other OS it works but with windows 7 x64 it doesn't work on another computer either
Can anyone help me with this? 

HI,
Look at Wifi Guy's post on 10-15-2009, titled Solved Photosmart C7280 All in One.  Worked for me.  Had been running around in circles for the last two weeks.  Hope it works for you.
Good luck!

Similar Messages

  • HP Laserjet P1006 is not working on Windows 7 (64-bit).

    I lost my original CD-Driver and I tried to download the CD-Driver on HP website but it doesn't work when I click printing.  It seems that my HP Laserjet P1006 is not working on Windows 7 (64-bit).
    Can anyone give me a link that works for installing driver for HP Laserjet P1006 for Windows 7 (64-bit)?  
    Thanks for helping!

    Hi @achieverone ,
    I can help you with finding the drivers for the Laserjet P1006.
    Just to clarify, you were able to install the printer software, but it just isn't printing correct?
    Here are the two drivers available for Windows 7 64 bit.
    HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver.
    HP LaserJet P1005/P1006/P1500 Printer Series Full Feature Software and Driver.
    Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
    Open and close the lid five times quickly. It should print off a page with black lines on it.
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

    When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

    Thanks for the reply. I never get the option to "Restore Previous History" from History. I don't even have the box checked that asks to delete the history when Firefox closes. I don't know what's wrong, no matter what, I always lose everything. I have the box marked "Show my windows and tabs from last time" for when I open Firefox, but it never shows that, just my homepage. Also, when I check my History, it only shows the pages that I opened since I started Firefox, nothing from before. Even if I were to open up 10 pages now, close Firefox, and open it, the history would only show the homepage that opened this time, not any of the 10 pages that I opened 5 minutes ago.

  • I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

    I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
    When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
    Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
    Please help!!

    I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
    I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
    I was afraid of rebooting and possibly losing track even of the ghost.
    I did not try EasyFind - I'll keep that in mind next time.
    Thanks for all the comments.

  • Since I've installed Mountain Lion, my mail does not "UNBOLD" my read mail, even though I have checked in Preferences.

    Since I've installed Mountain Lion, my mail does not "UNBOLD" my read mail, even though I have checked in Preferences.

    You don't sync the MM calendar anymore, you subscribe to it in iCal,
    iCal>Preferences>Accounts, enter the details here.
    MM should be the default calendar on all clients.

  • HP Laserjet P1102 does not work with Windows 10

    I have just upgraded from Windows 7 to Windows 10 and whilst my Canon MG6150 works with Windows 10, the other printer HP Laserjet P1102 does not. Looking at the HP website it seems that the Windows 10 drivers for this printer are not yet available. Is there any way I can use the printer without the dedicated drivers? I have been told I should try to roll back but the printer is not recognised in device manager. Please help!

    Manual, Please let me know the outcome.

  • Hp split 13 X2 does not update to windows 8.1 how do I stop the auto update

    My notebook runs with Windows 8.0 and functions well.  Unfortunately the Windows OS want so to update to Windows 8.1 and my notebook does not accept the upgrade as it will not configure the change.  Even though I have set the Windows update to require my approval before updates are initiated it continues to auto update to Windows 8.1.  When the update fails my PC automatically reinstalls Windows 8.0 and I am back working again.  This has happened 3X in the last 2 months and I am frustrated.  Does anyone have any suggestion on how to stop this cycle?

    Hi @PDaley,
    Welcome to the HP Forums!
    It is a terrific place to find answers and tips!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    How Do I Find My Model Number or Product Number?
    I understand that you are having an issue with updating your Windows 8 to 8.1. Although you have set the update to require your approval before installing the update, it does it automatically.
    When the update fails it reverts back to Windows 8 and all is well.
    Here is a link to HP PCs - Updating Windows 8 to 8.1 that may help.
    You can also go to the  Windows Compatibility Center  that may also help to determine what is required for a successful upgrade.
    This one from MIcrosoft may also help.  Update to Windows 8.1 from Windows 8.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Oracle Database Express Edition 11g Release 2: Does not work in Windows x64

    Hi
    I download a year ago oracle 10g and installed in windows7/64bit.
    Then I messed up my computer. So I had to reinstall from scratch.
    oracle 10g seems to be not available anymore.
    Now 11g is available. But it says does not work in x64.
    Can somebody explain this?
    Thanks
    Beat

    Hi, and welcome to the OTN forums!
    I download a year ago oracle 10g and installed in windows7/64bit.
    Now 11g is available. But it says does not work in x64.Well, in fact, 10.2 XE wasn't certified for x64 either, not even for Linux x64...
    11.2 XE has a Linux x86_64 release, and there has been an announcement that there'll be a x64 release for Windows as well, but it's not available (yet).
    There have been a lot of reports that people got 11.2 XE work on x64 Windows machines as well, with a few tweaks at installation time and/or afterwards...
    You'll find tons of posts on that topic when using forum search...
    oracle 10g seems to be not available anymore.Right, the official downloads have been removed after all database 10.2 releases fell out of (regular) support.
    -Udo
    Edited by: Udo on 15.04.2013 21:48

  • How can I get my FFox6 to remember passwords; it does not offer to remember them, even though box in Options is checked?

    I use Windows 7 with FFox6.
    In Tools>>Options>>Security have checked in box "Remember passwords" However when entering passwords in web-sites FFox does not even offer the options of whether to remember the passwords or not.
    Is FFox 6 still at experimental / trial stage with this function not yet enabled in development? How can I enable this function? OR will it work if I should uninstal and reinstal FFox?
    Thanx
    PB

    Try a reset:
    1. Hold the Sleep and Home button down (together) for about 10 seconds
    2. Until you see the Apple logo (very important)

  • TS1369 my computer has suddenly told me it does not recogise my i pod even though ive had no trouble downloading tunes anytime before now

    my computer has suddenly told me it does not recognise my ipod,no problems ever before...any suggestions???

    See:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X
    If you have a PC I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • "Organize Bookmarks" does not appear under Bookmarks menu, even though Help advises to go there.

    I've needed to eliminate Bookmarks. Because I have no "Organize Bookmarks" or "Manage Bookmarks" option under the Bookmarks menu, I've tried dragging bookmarks off the list onto my desktop. I've tried right-clicking to get a "delete" option (but there is none). I've gone to "Help" where I'm advised to click on the Bookmarks menu item, select "Organize Bookmarks," and proceed from there. An image of the items in "Organize Bookmarks" appears in this "Help" instruction. BUT -- "Organize Bookmarks" does not appear when I click the Bookmarks menu item.

    That menu item was changed to '''Show All Bookmarks''' in Firefox 4.0.

  • Iphone 6 does not vibrate in lock mode even though settings are set correctly.

    I can even be holding the phone and it does not vibrate when a call comes in. How do I change this. I have checked all my settings and they are set to correctly. I am missing so many calls and having to call back. Very frustrating!

    Is do not disturb turned on by any chance?

  • My podcast does not show up in search, even though I submitted it and it was accepted.

    I think I submitted the wrong feed URL, but it's been over two weeks and I did not receive a confirmation message.
    When I try resubmitting the correct feed though (which  has been checked with a feed validator), it tells me that my feed has already been submitted..
    Is there anyway I can start this process over again so I can just begin with the correct and validated link?

    My feed URL is
    http://www.firepolemarketing.com/blog/category/fireside-chats-with-danny-iny/fee d/
    but I accidentally submitted
    http://www.firepolemarketing.com/blog/category/fireside-chats-with-danny-iny/
    I can find the latter using the advanced search and it is preventing me from submitting the former.
    When I try to "report a concern" to delete the one I initially submitted, it says that I can't because I did not subscribe to the it via the Itunes directory.
    Is there a way to get the feeds deleted so I can add the correct one?

  • Printer Dialog does not display in windows x64

    Hy everyone.
    I have an applications in c# running in windows 2003 x64 bits, when show a report in ReportViewer and Click on Printer button, the printer dialog don't open.
    My questio is what can ido to show the printer dialog ??
    Thanks in advance.

    Hello,
    can you tell us whether this is a win or web app ?
    Thanks

  • TS2972 "shared" does not show up in iTunes even though sharing is turned on

    any ideas.  I just got a apple tv and am not able to access my main computer which is a mini mac

    Sharing is nothing to do with homesharing, homesharing is set up from the advanced menu in iTunes.

Maybe you are looking for

  • Mix between MS Outlook Calendar and Mac Contacts - how I got to work

    I've tried to mix my work PC computer with Microsoft Outlook Calendar with my Mac based iPhone. This is how I did it. Can this be done by mobileme? For Now it this works with Outlook over USB. My Microsoft Office Outlook 2003 windows XP within firewa

  • ITunes "uploads" music to iPod, but only loads one or two songs

    Hey, I've got somewhat of a problem on my hands. Whenever I attempt to update my iPod with all the songs in my iTunes library (I restored my iPod recently, losing all of the songs on it), it'll update like nothing was wrong. This will continue for a

  • AE video card suggestion

    Okay, so I've seen the list on Adobe's site giving 'supported' video cards. But I'm looking for performance upgrade: -Windows XP SP2 -Intel Core 2 Quad Q6600 Kentsfield 2.4ghz -4gb DDR2 800 RAM -2 TB 7200RPM HDDs (no raid) -Cineform software codec fo

  • Adobe taking over other programmes

    I opened a zip file, which had a Pdf contained, now IE, Chrome, Outlook, Microsoft Office and other components have the Pdf label instead of their own label and when i open them they go streight to Adobe and say that they cannot be opened has they ha

  • A1278 clean install of osx

    I have just purchase a used A1278 MBP without the original dvd's. I believe I can buy a copy of SnowLeopard, erase the HD and reinstall OSX to bring it back to factory condition. I have searched the net and seen that people have 2 disks(from factory)