Laserjet P1006 will not install

I have used a scrubber utility in the past for problems with Officejets.  Is there a similar utility for Laserjets?
Problem is on an old Pentium II desktop with 256Mb of RAM running Win XP with SP1.  The printer used to work fine and now does not.  Uninstalled the printer and tried to reinstall, but I keep getting an I/O error after plugging in the USB cable.  Other USB printers work fine on the same desktop, and the Laserjet installs and works fine on another PC.  Any other ideas?

Hi jnjgoss, 
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links. 
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support 
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413 
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Hp Laserjet 8150n will not install on windows xp

    computer went to the shop and operating system was replaced and now my printer will not reinstall.
    windows xp and a hp laserjet 8150n printer.
    printer is on the network and recognized by 3 other computers.
    cabled network
    loaded printer software to 64 % and then comes up with an error saying restart the computer and try again
    each time I try to install the printer.
    the wizard finds the printer but can never complete the installation.

    Hi jnjgoss, 
    This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links. 
    http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support 
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413 
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP p1006 will not install on Lion 10.7

    I have an HP Laserjet P1006 printer.  I have updated my software with software update several times.  I have also downloaded the updated drivers for HP from Apple dated April 2013, which I noticed in another posting. 
    When I attempt to add a new printer the OS recognizes a P1006 is connected to the USB port and indicates that the drivers are available from Apple.  But, any attempt to install the driver causes an internet search that ends with a failure message indicating that the driver software is not currently available from Apple. There appears to be no manual solution.  Every attempt to install the printer leads to the same combination of messages indicating the software is available from Apple but then a failure to retrieve it.
    Thanks!
    gtc

    This is a peer-to-peer user supported forum. HP maintains no official presence on this forum.
    When requesting assistance, please provide the complete HP model name and/or product number of the hardware in question. Additionally, please provide the brand and complete model name or number of the computer being used. Also indicate what you are trying to do and how the hardware is connected together.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Hp laserjet p1006 is not being installed on window server2008 64 bit

    hp laserjet p1006 is not being installed on window server2008 64 bit

    Hi,
    The printer is not supported on Windows Server 2008, only the operating systems listed below are compatible:
    http://support.hp.com/us-en/product/HP-LaserJet-P1000-Printer-series/3435682/model/3435683/drivers
    The latest supported server OS is Windows 2003. any newer Server OS is incompatible with the printer.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Laserjet P1006 is not working on Windows 7 (64-bit).

    I lost my original CD-Driver and I tried to download the CD-Driver on HP website but it doesn't work when I click printing.  It seems that my HP Laserjet P1006 is not working on Windows 7 (64-bit).
    Can anyone give me a link that works for installing driver for HP Laserjet P1006 for Windows 7 (64-bit)?  
    Thanks for helping!

    Hi @achieverone ,
    I can help you with finding the drivers for the Laserjet P1006.
    Just to clarify, you were able to install the printer software, but it just isn't printing correct?
    Here are the two drivers available for Windows 7 64 bit.
    HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver.
    HP LaserJet P1005/P1006/P1500 Printer Series Full Feature Software and Driver.
    Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
    Open and close the lid five times quickly. It should print off a page with black lines on it.
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Color LaserJet CP1520nw will not connect to network (time out repeatedly)

    My HP LaserJet CP1520nw won't connet to my wireless router upon installation, no many how many times I've been asked to connect it to the computer via a USB printer cable.   I uninstalled and reinstalled all software, and each time I try to set it up for wireless connectivity by connecting my computer and the printer via a USB printer cable, it gets to 99%  installed on the progress bar and sits there until it times out.  I suspect one of the follow but am open to other ideas from those more knowledgeable:
    1.  Is the printer locked onto some old, initial configuration from a previous wireless network that needs to be purged of addresses, etc. before it can accept the new ones?
    2.  Could my WPA WPA2 PSK AES encrytion be messing it up?  Are the modern firmware and updates designed to accept these ?  I never have gotten to a screen where it asks for my encyption key or even a WPS pass phrase.  What to do if so?
    3.  Could Church Lady be correct and that it is Satan preventing the installation?  If so, what icons does he use to watch out for and will my Norton anti-virus and malware quarantine him to Hell automatically or does it require manual enforcement?

    Hi @Marvalina1968,
    Welcome to the HP Forums!
    I noticed that your HP Color LaserJet CP1520nw will not connect to network with Windows 7. I am sorry to hear this, but happy to help!
    First to answer your questions:
    It is possible the printer could be locked to an old configuration and needs to be reset.
    I don't think your WPA WPA2 PSK AES encrytion could be messing it up, unless you got some really strange characters in your password.
    Your Norton antivirus, could possible be causing the installation to fail.
    Please take a look through the following guides:
    'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    Printer Does Not Maintain Wireless Connection.
    If the guides do not resolve the issue, please try the following:
    Uninstall the software. Uninstalling the Printer Software.
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any antivirus programs. Disable antivirus software.
    Disable any firewall programs. Turn Windows Firewall on or off.
    Re-install the software. HP LaserJet Full Feature Software and Driver.
    Hope this solves your problem, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Driver software will not install

    When trying to install drivers for my Officejet 200 MFP it will get to 77 % and fail.  it says to reboot and try again have tried several times but get no further.   Loading on a HP Pavillion gt4

    Hi , Welcome to the HP Forums! I noticed that the driver software will not install for your HP Officejet 200 MFP printer on Windows 7. I am happy to look into this installation issue for you!  What is your printer's Product/Model Number? (ie: HP Laserjet 200 MFP, etc.) To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As I am having a little difficulty locating the type of printer that you have. In the meantime, please try our HP Print and Scan Doctor, and let me know the outcome!  Hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • I am trying to use an education program that needs Java applets to install and use and it will not use Safari. When I download IE from the web it will not install. How can I get a browser that will work on my MacAir for travel use of this program?

    I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.

    Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows 7 or Windows 8.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • I am having a issue installing Adobe Acrobat XI.  I am running Windows 8.1. When  go to install it gets an error.  The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

    I am having a issue installing Adobe Acrobat XI.  I am running Windows 8.1. When  go to install it gets an error.  The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
    I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014.  I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed. 

    Hi all,
    Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
    I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
    When I compile using "javac" I get an error saying "javac" is not recognised.
    When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
    Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
    I have removed all previous references to java in the registry editor.
    Please help !
    Regards,
    Vipul

  • ITunes will not install, I get an error message: Could not open key:HKEY_LOCAL_MACHINE_software_classes_CLSID

    I tried to reinstall iTunes 10.5 on an older PC using Windows XP. iTunes will not install. Tthis is the full error message. Could not open key: HKEY_LOCAL_MACHINE\software\classes\CLSID\{063D34A4-BF84-488D-B699-E8CA04DDE}
    Please Help

    I was able to solve this problem using the utility explained in this post:
    http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
    Thanks!
    Dell Windows XP

  • ITunes 11.2.2 for Windows x64 will not successfully install.  Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2.  Any Thoughts?

    iTunes 11.2.2 for Windows x64 will not successfully install.  Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2.  Any Thoughts?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
    If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
    tt2

  • Quicktime will not install on my PC - also stopping iTunes from working

    Quicktime and iTunes will not install on my Vista SP 1 PC, Whenever I try to install either I get the following error message;
    Quicktime - "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
    iTunes - "The installation of Quicktime did not complete successfully. iTunes requires Quicktime."
    From my iTunes error message I hope that by correcting the Quicktime error the iTunes should in turn be fixed.
    I am using the latest installers for each and I can't understand why this is happening,
    I have tried completely removing my old version of Quicktime and tried to copy my other PC's Quicktime folder into this one however that has not worked. I have also tried using the latest installers multiple times however I always get the same error message.
    Please help me fix this error where Quicktime can't install,
    Thanks
    James

    Says windows install package does not operate yet I can install other programs.
    What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

  • I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store.  It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available.  Please help.

    I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store.  It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available.  Please help.

    Welcome to the Apple Support Communities
    One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
    First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
    We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

  • The new ACR 5.5 update will not install in Elements 7.0

    Hello All:
    This situation is now becoming ridiculous (well, for me that is).  I just tried to install the new ACR 5.5 update and it is "unable to install" into Elements 7.0.  I downloaded the update several times, unzipped the install file, but when trying to install, it just gives me a message that it is unable to install and to hit the "quit" button.
    I have a Vista 64 Bit system with 12 Gigs of RAM.  I've installed Elements 7.0 and Lightroom 2.5 on my system - all with no problems.  For some reason, I could never get Photoshop CS-4 to install at all and I've been through the mill trying to install Photoshop - but nothing worked and had to eventually give up.  Trying to get Adobe support for CS installation on my 64 Bit system has been ridiculous in this regard as each and every time I called, I was connected with some techrep located in India who all they did was "parrot" back what I told them - how frustrating.  But as I mentioned, Elements 7.0 and Lightroom installed just fine.
    The previous ACR 5.4 installed just fine into Elements, but now...ACR 5.5 will not install.  It tells me that I do NOT have CS-4 installed so it cannot install.  What's up with that? Has Adobe stopped supporting the latest ACR upgrades for Elements?  What gives?
    Does anybody just have just the newest ACR 5.5 plug-in by itself that they can send me so I can just put it in my plug-ins folder (or a place where I can download it)?  Adobe used to just have the plug-in that you could unzip and copy and paste and put it into your plug-in folders - but not anymore.  Now they make it an 82 Meg install program and thus some of my problems.
    Can anybody help here?  Why does the install program look for CS-4, yet overlook Elements 7.0 completely.  Helpppppppppp.
    Ben

    Hi Benherrmann,
    Sorry to listen that you havent been able to install the Camera Raw 5.5 plugin.
    But as far as my knowledge goes for PSE, PSE never lists Camera Raw plugin for updates in the Updater Preferences dialog i.e., if you will launch Help->Check for updates, a updater window will open. If you will check the preferences of that updater dialog, it will tell you that it never checks for updates for Camera Raw plugin unlike what happens in Mac. In Mac Camera Raw updates does get installs just by installing PSE(v6 of course as there is no PSE7 for Mac. Hopefully there will be a v8 for Mac by the end of october as seen in the last release).
    Dont know exact reason why Adobe had configured it in that way? why there is some difference between Win and Mac.
    So it prompts me that somehow you need to install Ps CS4 on the machine to get the patch installation through updater. Although this is not Ps forum, would you mind telling what error/issues are you facing while installing Ps CS4?
    Regards,
    Ankush

  • Java applet will not install in browser

    My VI will not install a JAva Applet. I jsut keeps saying "Installing Java Applet" and it never prompts for an install or anything. Any ideas? Is there something extra that I need to do that I am not realizing? I attached a screenshot of the window where is says installing.
    Solved!
    Go to Solution.
    Attachments:
    Capture.PNG ‏54 KB

    How are you trying to install the java applet? Through a website? Calling an installer? 
    Could it be that the applet already installed on the computer?
    Has it ever worked? 
    Applications Engineer
    National Instruments
    CLD Certified

Maybe you are looking for