Laserjet p1102w can't connect to the network

I am trying to connect my laserjet p1102w printer to the wireless network, numerous times, and it still won't work! I have chatted with hp for three times already, uninstalled and installed software, and looked at the manual from cover to cover. Can anyone please help me connect my computer to the network, anything I have tried does not work.

Well now we know what the issue is. You are not connection to your wireless router via SSID and password.
Go here.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?product=4110396&cc=us&dlc=en&lc=en
and download the Getting Started and User guide. Page 7 of the User guide is where you want to start. You may have already done all this... but you have not detailed anything yet so I don't know. Keep the USB cable disconnected and start the CD. It should prompt you to plug in the USB cable. If not, plug the USB cable in and start the CD again. Now detail each step and let us know where it fails at please.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Upgrading to xcode and can't connect to the network

Hi! I use a C++ library in my application which connects to the network (I suppose it uses sockets). I've been using it for months and I was using xcode 3.2.4. Now, I just had the great idea of upgrading to xcode 3.2.5, and I found out my application was crashing with the error:
If you are encountering this problem running a simulator binary within gdb, make sure you 'set start-with-shell off' first. 3.2.5
Ok, couldn't solve it, so went back to 3.2.4, as suggested somewhere. The application is not crashing anymore, but now the library can't connect anymore to the network. Tried to rebuild it (I didn't write the library but I have the sources) and use the new library, but nothing. Still the library can't connect to the network. I tried with every simulator.
Any idea what there could be wrong and how I may be able to solve this? Can I somehow delete manually everything related to xcode and the simulator and try to start all over again?
Thanks!

I've been able to temporarily solve this problem by removing the entire Development directory and installing again xcode 3.2.4. Even with xcode 3.2.4 however, the same happened, and I had to do this procedure again. Now it seems to be working correctly, but it seems something very strange has happened. Hasn't anyone experienced anything similar?
Thanks!

HT4260 I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

Try resetting your modem. Power it down. Wait a moment, then power it up again. While it resets, do not change what is connected to it.
In another, though unrelated article, Apple recommends the following:
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
This step really ought not be considered optional for the configuration you propose. If the problem persists after resetting your modem, reset everything else too.

Upgrade ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1).

I just upgraded my ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1). I bought the phone online in Canada but have a Hong Kong simcard. Any solution to connect to network?

I bought mine in the US and activated using a German SIM. It worked fine first on 6.0.1. After upgrading to 6.0.2 the SIM does not work. I have reset the reset the phone and still does not work. I loaded a new SIM and the phone worked for few minutes before going to Searching mode after I restarted the device. I am being told by the Genius Bar team that this is a Hardware failure.

I PAD 2 won't activate to itunes - can't connect to the network

i'm trying to activate my ipad2, i'm using windows software operating systm. i keep receiving a message that says itunes can't connect to the network, check settings. i'm having no problems with internet. won't let me install itunes 10.1

As I understand it, you already have iTunes for Windows version 10.2.1, and you're running Windows Vista Home/Premium on an HP.

Ipod stuck in recovery mode and won't restore. says it can't connect to the network.

My son tried to jailbreak his ipod touch like an idiot and of course it did not work. Now his ipod is stuck in recovery mode and I can't get it to restore. I get a message that says:the ipod software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later. I have internet access and everything is working but itunes can't connect to it. Why? I have been having issues with itunes for a couple weeks now. I can't connect to the store and redeem itunes cards either.

Make sure the setting for your security software allow iTunes to contact Apple servers:
iTunes for Windows: Troubleshooting security software issues
As for the iPod, since he tried to modify the software, the only thing that could help would be DFU mode , we can't help much more, problems with jailbroken devices can't be discussed in theses forums, due to the Terms of Use.
Your son has to ask those people for help, which encouraged him to jailbreak his device.

IMac can't connect to the network.

When I try to open safari (version 5.1.1) I get the message "Safari can't connect to the server."
iTunes can't connect either.
However when I go under system preferences> network, it says Wi-Fi is connected. And all the other computers in the house can get online fine.
I use this computer pretty much just for video/film work, and very rarely use it to go online, so this problem could've been going on for several months without me noticing. (At the moment I need to download some software.)
I've googled it, and seen other people with similar problems, but so far none of their solutions have worked,
Thanks in advance for any help!

In the networks pane of system preferences, click on assist me, and choose diagnostics. Follow the instructions to diagnose the problem network. This may provide useful information to continue troubleshooting.

Printer can't connect to the network HP photosmart c309a

I keep having connection issues with my printer. I recently moved it from one room to another and it will not connect to the network. When I do the network test, it doesn't find it and it doesn't find an IP address either. Getting very frustrated.....

Try to move the printer back into the previous room and re-connect.
If it connects with no problem, your issue would be the distance between the router and the printer.
It should be presented in the same room. Before you try doing this, unplug your router for about 20 seconds and plug it back in, and try to connect.
Let me know if this helps, thanks.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

My other computers can't connect to the network/internet

i am using a cable modem and have it hooked up to my airport express.
my mac is accessing the internet fine, but my laptop (windows) can't log on to my wireless network and connect to the internet.
i've tried to change my internet sharing preferences under "sharing", "internet", but that does not seem to be the right solution. when i try to connect with my laptop, it asks me to enter in a WEP, ASCII code. i've read all through the help menu and it told me to enter in "applecomputer" as the password, but that doesn't work either.
any help, ideas, and suggestions would be greatly appreciated.
thanks and take care!
iMac g5 Mac OS X (10.4.6)
iMac g5 Mac OS X (10.4.6)

i am using a cable modem and have it hooked up to my
airport express.
my mac is accessing the internet fine, but my laptop
(windows) can't log on to my wireless network and
connect to the internet.
The problem you are having probably lies with the encryption key.
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP1)
http://www.ifelix.co.uk/tech/1010.html
iFelix

HT5192 Update to iOS5.1, error message says can't connect to the network

I'm unable to update my iPad2 and iPhone 4 with the new iOS 5.1. I'm continually getting an error message that says, "There was a problem downloadng the software for the iPad. The network connection could not be established". And yes my internet is on and working!
thanks
Helen

Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
You may have multiple entries. Delte them all.
Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

Can not connect to the network

I just purchased the Apple TV. My network consists of an Airport Extreme "n" base station and a Powerbook. I "had" WPA security set up on the network, but since I had trouble connecting the Apple TV with the password, I reset the base station and are back to the default configuration, no security, and in bridge mode to troubleshoot. Even with this configuration I am unable to connect the Apple TV.
I get:
Connection Failed
Apple TV could not connect to the Internet. Check your network settings and try again.
My laptop is right next to the Apple TV, has a very strong signal and does connect.
So far I've been unable to get anyone at Apple Technical Support to give me help on Apple TV.
Anybody have any ideas?
Thanks!

Wow... what an ordeal! I did get it working. I had to perform a "Factory Reset" on it and then it was able to connect. I tested it with a couple of movie trailers and it worked fine. I changed my network back to WPA with a password that I would be able to reproduce in Apple TV, and it connected up fine. What a big sigh of relief! I am now streaming my iTunes content and life is certainly wonderful!
I am very happy with it! It only took me a little over 5 hours to install it!
Thanks for all your help Winston!

I cannot get my laserjet m1536 dnf to connect to the network.

it will not assign a dns address when i manually assign the IP address and it will not pull an IP address from the DHCP server when I set it to autoconfigure. How can I assign the DNS address when I cannot connect to the printer via the web

Your already purchased Mac apps or your iPhone, ipad apps? You do know that iOS apps don't run on Macs right?

I recently upgraded itunes. now i get the error message that itunes can't connect and the network connection has timed out

i keep getting an error message that states
itunes could not connect to the store. the network connection has timed out.

Try temporarily disabling your firewall and see if you are then able to access the iTunes store.

Can't connect to wireless network with Apple Computers (WRT54G)

Hi.
I have had a password protected router (WRT54G) for over two years that any pc will connect to if I give them the password. However, my roommate has an apple laptop and he can't connect, no matter how many times we try. I just got an ipod touch, and it can't connect to the network either. We are inputting our password correctly - why can't apple computers connect to my wireless network??
Again, my router is a WRT54G.
Thanks !!!
Message Edited by Debo24 on 05-24-2009 06:41 PM

Make sure you enter the correct password...To check your Wireless Settings follow this link
If your Wireless Security is WEP then use WEP Key1 and not the Passphrase, make sure to enter a dollar sign on your Apple Computer when you attempt to connect...If your Wireless Security is WPA/WPA2 then use the WPA Shared key and no dollar sign is required...

HP Laserjet P 2055d - Connect to the network

Does anyne know if it is possible to modify a Laserjet P2055d to connect to the network?
I think that the 2055dn is the network model, can a network card be added?

It has a USB connection in back. What you may need is a wireless USB Print Server. Just search the web.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Laserjet p1102w can't connect to the network

Similar Messages

Maybe you are looking for