Laserjet P1102w - unable to connect and update wireless settings

Hello, I'm hoping someone can help me with this. I have a laserjet P1102w, which was working beautifully on my wireless home network. I recently changed the network configuration and router. I need to update my IP address in the printer settings.
I am running on Windows 7, and when I connect to the printer with a USB cable, the computer recognizes the printer but it does not appear in the control panel. I have updated all the software (and flash) successfully on the printer, and still nothing.
I tried this on 3 different computers, still the auto-run software does not appear, nor am I able to access the printer software. I've changed the cable and nothing.... Thanks for your suggestions.

Hi Mark-in-Calgary,
Download the full feature software and drivers from the link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-80329-6&cc=us&dlc=en&lc=en&...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't work. All software is updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

Since updating to Firefox 35 it's the only browser that shows error "Unable to connect" and nothing works from the support answers to solve it

so far i tried:
1. to set the windows firewall settings
2. I've reinstalled firefox
3.

Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''Network.'''
Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
Check the settings.
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

HP Laserjet P1102w !!Failed to update software!!

Attempted multiple times to perform update on Laserjet P1102w.
Received error dialog box: "HP Laserjet P1102w !!Failed to update Firmware. Power cycle and try again."
I'm printing to the unit just fine.
This question was solved.
View Solution.

Hi,
Is the printer connected via USB or through the Wireless network?
If you may use a wireless network connection be sure to temporarly plug a USB for the update as listed on the update instructions:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-115794-2&cc=us&dlc=en&lc=en...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

When open Firefox 8, says 'Unable to connect' and no websites work. Internet connection is fine. Please help :(

My Firefox automatically updated to Firefox 8. Since doing so, when I open the browser the screen displays a box saying 'Unable to connect' and says the same for any website. My internet connection is fine. I uninstalled and installed Firefox again, but problem persists. Please help as this is really frustrating me :(

Did you try this?
'''Remove Firefox from your program's list of trusted or recognized programs, then add it back.'''
Some Firewalls don't specify which version of Firefox is permitted. <br />New version of Firefox = new executable was installed = new permission is needed
The top 12 ways to get fooled by Firewalls: <br />
http://forums.mozillazine.org/viewtopic.php?p=2295421#p2295421

Daughter's touch went blank again and while trying to restore from itunes backup screen keeps tellin me to connect to itunes. am connected and updated

My daughter's touch has gone blank and has no apps or music or photos on it. This has happened before and i was able to get most of data back on. This time, when i choose restore from itunes backup, touch keeps telling me to connect to itunes. i am connected and updated and using a different cable and have tried shutting it off and on. Help she needs it for a class trip tomorrow morning, is 13 and extremely moody!

Did you try to connect in recovery mode to restore and set it up as new device?
iOS: Unable to update or restore and How to back up your data and set up as a new device

I'm unable to connect to my wireless network

I am unable to connect to my wireless network on my iphone 4. It worked previously. My husband has no problem with his iphone connecting.

Same here. Upgraded 2 separate iPhone 4 to iOS 5 and now both get an error that say "incorrect password" when trying to connect. iPad 1 upgraded to iOS5 and all 3 macs connect fine using same password. (Router is Apple Airport base station running 7.5.2)

Macbook air is unable to connect on hidden wireless network

Dear users and support,
I have just bought my macbook air with lion os already installed, but I am unable to connect to hidden wireless network. Is there any trick to fix it? even though I am typing the name and password it's unable to login.
Please advice.
tks,

Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Reset the System Management Controller.

Unable to connect to any wireless internet

laptop not supported any dongal to connect internet where as device connected other laptop. If i connect with Hot s[pot then its connected so request you to help on this & suggest what should i do. shoud i format ?

Hello @James0007,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook computer is unable to connect to any wireless network. I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I am wanting to update iphone to 4.3.3, however I am connected to the internet, yet itunes is telling me it is unable to connect to update server because i am not connected to the internet... please help

I am wanting to update iphone to 4.3.3 software. however itunes is telling me it is unable to connect to update server as i am not connect to the internet. yet i clearly am connected... Please help

Looks like I've asked a really old/common question - toonz posted the answer - I've copied it below. Thanks toonz, everything now ok.
Correct AnswerRe: Updating to 1.1.3                                                                        02-Feb-2008 23:19                                                    (in response to alibeau)
                        You can fix this by following the steps in this article:
http://docs.info.apple.com/article.html?artnum=304468
             Liked         (1)

My computer was restarted and now i want to connect and update my iphone with a new itunes. how do i do this without losing all my stuff on my iphone?

my computer was restarted and now i want to connect and update my iphone with a new itunes. how do i do this without losing all my stuff on my iphone?
i didnt get a chance to back my phone up before the comp crashed
will i lose any of my stuff?

When you open iTunes and plug in iPhone (iPod) to computer, it appear in the left bar. Then just simply right click on you iPhone (iPod) and choose Transfer Purchases, this should copy your purchased items to your computer.
Hope this help

My FaceTime won't let me sign in, I verified my ID online but when I go to sign in on the iPad 2 it says unable to connect and Wont send me the email?

My FaceTime won't let me sign in, I verified my ID online but when I go to sign in on the iPad 2 it says unable to connect and Wont send me the email?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Can't delete or edit a Mail account that is unable to connect and it keeps notifying me

Can't delete or edit a Mail account that is unable to connect and it keeps notifying me and asking for password. Macbook Pro with Yosemite. If I highlight the account and go to Mailboxes, "Edit smart mailbox" is greyed out. Delete the mailbox is an option, but the mailbox just doesn't go away and no error message displayed. Tried Mail/Preferences/Accounts, highlighting account and using minus sign, it tells me the account is shared by other applications and gives me an option to go to Internet Accounts. At Internet Accounts, the only mail account showing is iCloud. Meanwhile, the pesky Mail icon is jumping around the bottom of my screen.
Can anyone help?

Did you ever find a fix for this? Mine is doing exactly the same thing, even with 2.01 - I hoped that might fix it. I'd rather not have to reset and erase the whole phone.

Connecting and Updating External Database from SAP

Connecting and Updating External Database from SAP
How can i connect SAP Database to External database?
How can i update external databas from SAP withouting using BI/BW, Workflow or Net Weaver?
If anyone know please let me inform.
Thanks in Advance.
Jahnavee Trivedi

Steps
1. Create an entry in tnsnames.ora for the remote oracle DB
2. Test sqlplus user/pass@remote
3. create a synonym which points to a table at remote DB check docs.oracle.com
4. user ABAP code execute SQL to insert data into local synonym which inturn updates the remote DB.
I have done this in the past, it works great.
It requries, DBA skills + ABAP programming
-AJ

Laserjet P1102w - unable to connect and update wireless settings

Similar Messages

Maybe you are looking for