Laserjet p1505 stopped working

I have a laserjet p1505 that stopped working on my pc (window vista ultimate, 32 bit). When I check the printer queue, it shows the document is waiting to print, but nothing happens.
I checked and switched the usb and connections, deleted and reinstalled the drivers. Eventually (and because it had to be done anyway), I reformatted my hard drive and once again reinstalled the software from scratch. Again, the same problem. Interestingly, when I connect my laptop (same operating system) directly to the printer, it works.
Any suggestions?
Thanks,
Kathy

I would like to clarify that you have 2 computer, the same OS, one is PC and another is the laptop, you installed the same driver on both of them, via the same kind of connection - USB connection, but PC doesn't work,, and the laptop works. Is it the problem you are facing now? If it is the case, I suspect that issue is related to your PC itself.
To help your diagnostic this issue, I suggest that you can install the PDU (printing diagnostic utility) on your PC to do some troubleshooting. You can get the tool from P1505's product page:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-69712-2&lc=en&dlc=en&cc=us&...
Hope it helps.
I am an employee of HP but I only speak for myself and not for the company.

Similar Messages

My HP Laserjet 1200 stopped working I have downloaded and installed the pcl5 x64 5.3.1 driver.

I have run the troubleshooting several times and there are no issues found, yet every time I try to print
I get Error in the print que. Anyone know of a way to actually see the error message?
This was the default printer for this laptop and it has worked fine for years then today it just stopped.

Hi smurfie407,
Welcome to Apple Support Communities.
Try running through the troubleshooting tips in the article linked below, they should help you resolve the communication issue between your iMac and LaserJet printer.
Troubleshooting printer issues in OS X - Apple Support
Take care,
-Jason

HP laserjet 5100tn stopped working - networked

I have a LJ5100tn and for some reason it just quit working. It is installed in our small network. I deleted the printer and reinstalled the drivers and I still get nothing. When I go to add a printer and browse for networked printers the server sees it there but when I go to print a test page I get nothing. I tried to power cycle the printer and nothing. I power cycled the server and get nothing. Any ideas where to go from here?
thanks
Scott

Hi smurfie407,
Welcome to Apple Support Communities.
Try running through the troubleshooting tips in the article linked below, they should help you resolve the communication issue between your iMac and LaserJet printer.
Troubleshooting printer issues in OS X - Apple Support
Take care,
-Jason

Upgraded to 7.5.2 and HP LaserJet 1320 Stopped Working

I upgraded to firmware 7.5.2, and now my HP LaserJet 1320 doesn't work. I reverted to 7.4.6, and it still doesn't work.
Apple fix your firmware !

Hi smurfie407,
Welcome to Apple Support Communities.
Try running through the troubleshooting tips in the article linked below, they should help you resolve the communication issue between your iMac and LaserJet printer.
Troubleshooting printer issues in OS X - Apple Support
Take care,
-Jason

HP Color Laserjet printer stopped working after 10.4.10 upgrade

I upgraded other night to 10.4.10 and I'm now unable to print to my USB connected HP Color Laserjet 3500 printer. Anyone have any idea what might be the cause and how to fix it?
FYI, I already tried reinstalling the driver and fix the permission but no luck.

Hello,
Same problem here, with a HP aio 3015.
Does anyone have any ideas?
C.

HP Color LaserJet CP1518ni STOPPED WORKING!

Will the print driver for HP Color LaserJet CP151ni be included with the MAC OS X 10.6 updates anytime soon? I just bought this printer two months and what a waste if it will not be supported by the updated OS. Really disappointed! Need to print....!

Never mind. Just realized that it was a network issue. Was able to use the included driver with the 10.6 OS (CP1510 series)

HP LaserJet 1320 stopped working with Mac

Hello. I recently installed OS X 10.7.5 and now my HP LaserJet 1320 no longer communicates with my computer. I've searched HP site (refers me to Apple for updates), installed all update from Apple, deleted and re-added the printer, but the problem persists. does anyone have a solution?
thanks!

Hi smurfie407,
Welcome to Apple Support Communities.
Try running through the troubleshooting tips in the article linked below, they should help you resolve the communication issue between your iMac and LaserJet printer.
Troubleshooting printer issues in OS X - Apple Support
Take care,
-Jason

Hp laserjet 2605 stop working

Hi all... After one of latest upgrades (I don't know wich exactly), I'm unable to print with my HP Color Laserjet 2605dn, as a network printer. I tryed to reinstall hplip but nothing. I tryed to remove the printer (I use only cups web interface to admin printers) and add a new printer. All fine, but when I clic on printer model and "add printer" button receive this error: "Unable to copy PPD file!", and printer don't add.
Edit: Tryed with success to add printer with a separate ppd file (extracting from cups folder), but I don't be able to set options of the printer; the cups error is: "Error: Missing value string"
Cups version 1.3.8
Hplip version 2.8.2-2
Thanks in advance for your help.
Silvio.
Last edited by SilvioTO (2008-07-25 22:27:03)

A piece of cups error log when I adding a printer...
I [29/Jul/2008:10:22:05 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=6299)
I [29/Jul/2008:10:22:10 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6303)
I [29/Jul/2008:10:22:22 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6310)
I [29/Jul/2008:10:22:22 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=6311)
I [29/Jul/2008:10:22:34 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6332)
I [29/Jul/2008:10:22:41 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6336)
I [29/Jul/2008:10:22:41 +0200] Started "/usr/lib/cups/daemon/cups-driverd" (pid=6337)
I [29/Jul/2008:10:22:48 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6345)
I [29/Jul/2008:10:22:48 +0200] Started "/usr/lib/cups/daemon/cups-driverd" (pid=6346)
I [29/Jul/2008:10:23:06 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6360)
E [29/Jul/2008:10:23:06 +0200] CUPS-Add-Modify-Printer: Unauthorized
I [29/Jul/2008:10:23:13 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6364)
E [29/Jul/2008:10:23:13 +0200] CUPS-Add-Modify-Printer: Unauthorized
I [29/Jul/2008:10:23:13 +0200] Setting hp_color_laserjet device-uri to "socket://192.168.1.90:9100" (was "file:/dev/null".)
I [29/Jul/2008:10:23:13 +0200] Setting hp_color_laserjet printer-is-accepting-jobs to 1 (was 0.)
I [29/Jul/2008:10:23:13 +0200] Setting hp_color_laserjet printer-state to 3 (was 5.)
I [29/Jul/2008:10:23:19 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6369)

HP LaserJet Pro MFP M127fw installer stopped working

Have dificulty installing HP LaserJet Pro MFP M127fw drivers on hp 32bit laptop with windows 7
Build in printer software stops halfway
Downloaded software stops halfway
Standard windows 7 printer driver works fine and can print with it, but has no scanner driver
HP printer scanner doctor indicates scan software is not installed and directs me to driver download on hp website
installation of this software stops also halfway
No errorcodes anywhere, just message box installer could not continue and trying to find a solution. That box diapears as well.
Installation fails on both wired network and usb
no errormessages in windows logbooks
The http connection works fine
tried installation with smart install on and off (is off at the moment)
Spooler service is running fine
Searched this forum and more people seem to have this problem but there is no solution mentioned in the end.
Please help
This question was solved.
View Solution.

Hi @Lize2 ,
I see that you are having issues installing the printer, the installer stops working. Thanks for providing that detailed information. I would like to help you out today.
It sounds like something is blocking the software from installing, since just the driver are being installed.
Disconnect the USB cable, run the uninstall from the CD.
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
Do a msconfig to turn off any startup programs that might be interfering with the installation.
Click on Start, in the search box type in Run, enter, then type in Msconfig, click OK.
Click the Services tab. Click to select the Hide All Microsoft Services check box. Click Disable All, and then click OK.
Then click on the Start Up tab at the top. Click on disable all.
Reboot the computer.
Temporarily turn off any Antivirus software and Real Time Scanning. Especially if you are using Mcafee.
Then run the installation again. Right click on the install and select Run as Administrator.
Test the printer again.
Then go back into msconfig and Enable the All Microsoft Services and Enable All on the Start Up tab. Turn the Antivirus software back on again and the Real Time Scanning.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet 1536dnf MFP document feeder stopped working

The document feeder stopped working. It clicks when trying to feed and comes up with the error Document Feeder Mispick, reload. I cleaned the feed rollers as per the HP video, no change. Is this something I can easily fix myself (I can open screws and lubricate parts if necessary)? Any suggestions?
Thanks.

Hi @Solray,
Welcome to the HP Forums!
I noticed that your document feeder has stopped working on your HP Laserjet 1536dnf MFP printer.
There are two guides available that you can follow:
'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o....
'Doc. feeder jam', 'Open door and clear jam', or Other Jam Message Displays on the Printer.
If you have done all those steps already, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope these guides help, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP printer has stopped working - Laserjet p1006

I just installed Windows® 8 Consumer Preview and my HP printer has stopped working. I am using the Laserjet p1006 and I have tried everything, reinstalling the printer, re-downloading drivers etc. but to no avail. Are there new drivers available that work with Windows 8?
Update:
The printer is installed and driver has been picked up by Windows but every time I try and print something, it gives me an error that the document could not be printed.
Any suggestions

Really Thanks God
i Found solution of this problem Randomly only by praying
The solution
Connect The p1005 printer to a pc have windows 7 and print a page with it and get the cable connected to windows 8 after that and go to control panel > hardware and sounds > Device and printer > hp laser jet p1005 Right click > Printer properties > ports > uncheck bidirectional support then press ok and print ,, it works
Note : after doing the pervious steps if u turned the printer off u will need to connect it to windows 7 pc again and print and connect it to windows 8 it will work without the pervious steps //
it seems like if windows 7 gives it information that is reseted after turn it off
we wish windows 8 to solve this problem nearly
That is the Original post page : http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/laserjet-p1005-will-not-print/34...

Laserjet pro 400 color MFP m475dw scanner stopped working in windows 8.1. Please help!

updated my laptop to windows 8.1 and the hp scanning software stopped working. It would not find the printer even though i could print from it. I uninstalled the entire software suite, removed all traces of the printer from contol pannel and then proceeded to download the 8.1 64 bit version of the full solution suite. Tried to run it and the program gets to about 80%, says a problem occurred while preparing to install software to your system and tells me to restart computer and try again.
Tried restart, no go. then tried to load just the basic print and scan and same problem. Restarted, tried again and nothing. then i turned off firewall and antivirus. did prior steps and nothing. I can manually install the printer through control pannel but I cant get the HP software to load at all. plum out of ideas and of course HP wants to charge me to troubleshoot a year old printer but cant guarantee it will work. Lovely.... Any help is appreciated.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet CP1025nw HP system tray has stopped working

I bought this printer a month ago and about a week ago I started getting the error“HPCP1020SM.exe (64 bit) has stopped working.” then click close then“HP system tray has stopped working.” appears click close. the printer will still print but these errors continue to come up every time I print. I called HP support but they have no clue. Thanks for who ever can help.

Hi Have you tried installing the basic driver, and the basic driver update to see if you have the same issue? Let me know if you have the same issue using the basic driver. Can you also provide me a screenshot of the error message you are receiving? Firmware update: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-4&cc=us&dlc=en&lc=en&os=228&product=4052972&sw_lang= Basic driver:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&os=4063&product=4052972&sw_lang= Basic driver update:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-98162-1&cc=us&dlc=en&lc=en&os=4063&product=4052972&sw_lang=

Printer Software Installer has stopped working

Product: HP Laser Jet M1005 MFP
OS: Windows 7, 64-bit
Notebook ACER , Aspire 5349, Intel Celeron CPU B800 @ 1.50 GHz
(new notebook, old printer - printer worked well on Windows XP)
I downloaded driver ljM1005-HB-pnp-x64-en. Driver had been extracted and setup started.
Installation started and after some initialization (~10 sec) it kept writing:
Preinstalling the driver files... or Copying files to hard drive... (switching approx. once per second) after a while (~ 20 sec)
Printer Software Installer has stopped working. Windows tried to find solution but did not find anything.
I TRIED ALREADY EVERYTHING. I used patch for AMD processors (of course, did not work); I have Windows installer up to date; I disabled Internet Explorer 9.0 (I cannot uninstall and iether can I step back to IE 8.0 since notebook is brand new); There is no windows driver preinstalled for this printer and there is no similar driver working.
Driver cannot be installed and printer does not work.
Please, help.

Hello,
Thanks for the post. This is an odd one, I might suggest the method outlined below in the third link, if that does not help, I might recommend that you post this question on the following links below. Good Luck!
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX?

How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX?
There is no HP support for this old printer. I have tried to connect via ethernet (thru ethernet router), and it does not show up in printer preferences. The printer worked fine on system 9x but when I went to my new macs with system X no luck. This is a great B&W printer that prints at 18 x 24". I would like to keep it and not junk it, but its been sitting on my desk unused for some time now. Any thoughts or JUNK IT! Thanks, R.T.

Does anyone at Apple have help for this sort of question - I too have an old printer (HP LaserJet 5MP) that I would like to keep using on my Mac. (Mac OSX 10.6.8).
I got it working by getting a USB cord that connects to it - but every once in a while it just stops working for weeks. The mac 'sees' it and it sends the data because the printer lights start blinking but then it just doesn't do anything. Is there no one who can tell me (and raterada) how to get some new life into these old printers. I would rather not add this (and a new toner cart) to the landfill just yet. . .

Laserjet p1505 stopped working

Similar Messages

Maybe you are looking for