LaserJet P3005dn speed to print is too slow

Have the printer connected direct to computer via usb. When I print 2 copies, it will take 5 min for first copy, then an additional 5 min for the second copy. Why is it so slow?

Hi there ,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00381711&cc=us&dlc=en&lc=en
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

HP Laserjet 1300n: Postscript? PCL? too slow

Hello,
I have a Laserjet 1300n (max memory, 80 MB) connected with USB 1.1 to my iMac 2.4 GHz.
If I print only text the printer is fast, no problems at all. As soon as an image or logo or any bitmap appears, the printer slows down, a lot: one minute per page (before starting the print) is easily reached and I have to wait often more.
How can that be? I read somewhere that CUPS rasterizes the data before sending it to the printer, but the iMac-processor used is almost nothing.
I also connected the printer to a netbook Celeron 900 MHz... it printed *instantly*. I was surprised and envy, of course.
Now I think the printer is getting the data in postscript format and maybe it takes too much for the internal processor to rasterize it, but how to change the mode in Snow Leopard? If CUPS can rasterize, SL should be able too. Where should I look for this setting? I found nothing.
As side question, I also wonder in which cases does the internal memory help speed: I maxed it because I got 64 MB for few euros, but not much changed. Maybe it helps only when using raster data, taking more memory than Postscript commands/data? I'm not an expert in this field.
Thank you in advance for the help.

Thanks, I didn't know about that driver.
I think that now everything gets rendered locally, since the printer queue shows a percentage increasing during the rendering.
I am still not 100% satisfied, since the gutenprint driver tops at 600 dpi while the PS driver can also go to 1200 dpi (I can see the difference) and the images are now too dark (the dithering technique changed, ordered patterns from PS reproduce grays more accurately, at expense of resolution), but I think this is the best I can get from the printer when connected to a Mac, so that's it.

Laserjet pro 400 m451nw--Print is too dark

I have a LaserJet Pro 400 color M451nw, and whenever I print any type of blue, it prints really dark. Tonight, the blue on my monitor was a royal blue, and the blue that printed was almost black. I lightened the blue on the graphic, but it's still not royal blue. The program I'm using is MS Publisher 2013.
Is there a way for me to adjust the cyan cartridge settings so it won't print so dark?
Thanks,
SHJ
This question was solved.
View Solution.

Hello ayligcjdesign,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Speed of Time machine too slow?

I am running an iMAC and a Macbook Pro under OS X 10.7.5. The iMAC uses a USB 2 cable and the Macbook Pro uses a Firewire 400 cable to hook to an external disc for time machine backups. Previously a complete backup would take 90 mins on USB2 and 30-40 mins on Firewire. Incremental backups typically would take a couple of minutes only. Now the Imac takes over 20 hours for a backup and 2 to 3 hours for an incremental backup. The Macbook pro is this slow also. I am backing up 64 GB on the iMAC and 16 GB on the Macbook Pro. I have tried disabling antivirus software and wifi but no speedup. Does anyone have any ideas. This started with the 10.7.5 update.

There is a bug in Lion update.
https://discussions.apple.com/thread/3190305?tstart=0
That is just the post with 100,000 views.. there are lots more.. look at the whole lion discussions area.. they messed up spotlight and Time Machine.. might be related.
Great how Apple test these new updates before release.

Itunes 7.5 speed sync issues (WAY TOO SLOW)

Ok. I googled this and found that I'm one of a few thousand people suffering from the same problem.
Short Story:
- My ipod died and is being sent to factory for replacement.
- Borrowed girlfriends ipod since she doesn't use it much.
- Wiped iPod and started to sync my library to it.
- Took about 4 hours to copy a few songs... wth?
So, I looked this up online and sure enough there is a major complaint from lots of people stating that Itunes 7.5 has major issues, especially with sync-lag. I can't wait the required 7 days to sync my 15K songs and hundred or so audiobooks... so?
I can't use the "revert to Itunes 6.0.5" trick because my library is HUGE and I've made massive edits to the library since the upgrade to 7.5.
Itunes was running GREAT prior to last week. I've been using it on Vista for most of two years now with absolutely no problem... until now.
Is there any update on when Apple is going to correct this bug? Are there other threads about this? (Official threads on here I mean.. they are all over other forums on the web) (I searched but came up empty after a brief attempt).

I have a similar problem. I get a message saying Itunes was not properly installed and that I will not be able to copy or burn. Also not able to Sync Ipod touch. Told to uninstall and reinstall. Do this as suggested via the help site but same problem.
Any ideas anyone

HP Laserjet M1132 MFP is too slow over the network!

Hi,
My HP Laserjet M1132 MFP is too slow over the network!
I have connect the printer to a windows XP 32bit SP3 using UBS port. The printer works fine on the local computer but when sharing it over the network it works too slow, for example with print test page it takes about 45 seconds to print and for other documents it takes much longer time.
I have installed the latest driver form HP website and upgrade the firmware it the latest version.
It happens on other Windows XP machines as well.
I connected the printer to my laptop (Windows 7 64bit) and it works fine (No delays over the network) and it seems that this problem have some relations with the windows XP Driver.
I have used local port trick on remote machines (instead of regular method) like this:
''add a local printer;
'new port'
'localport'
\\XPcomputer\HPPrinterName as port name
but still nothing!
There is nothing wrong with the network, we use to use a Samsung printer on the same machines over the network with no problem.
I Really appreciate your HELP!
This question was solved.
View Solution.

BEHZAD_T, how is the printer connected to the network (wireless or Ethernet)? If it is slow wirelessly, I would suggest trying to connect the printer to your router with the Ethernet cord and install it to the networked computer that way.
Another question is, relatively speaking, how close to your router are the Samsung printer and the HP printer? Depending on the distance (and what stands between the devices) there can be a lag between sending a print job and it being received by the printer.
Let me know!

Laserjet 5000 (with jetDirect 620n): spooling from Windows 7 too slow

Hi,
i've installed new drivers for Windows 7 (32 and 64 bit) from HP website but however spooling is too slow. I tried all of drivers (PCL 6, PCL5 and PS). Only the PCL5 driver have an adequate standard of quality.
What i have to do to increase print performance?
Thanks
Alessandro

BUMP!

I have an ipad3(wifi cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

After updating to 4.3 I can't connect to wi-fi because the "internet speeds are too slow". How much speed does this require?

After updating to 4.3 I can't connect to wi-fi because the "Internet speeds are too slow". So what speed does it need?

I called tech support and I got the same **** canned response, backup and reset to factory settings. Yeah right! Everything was fine until Verizon shoved the software update down my throat. I finally unchecked the box in Wi-Fi settings for auto network switch. However, I still get the "Your Internet connection is unstable" warning no matter what Wi-Fi connection I hit.
In a related story, I received a new or refurbished phone as my original SIII had AC/charging connection issues. I called probably three times to attempt to back up my data, went into two stores in attempts to have them transfer the information over, and all were too incompetent and inept to assist me. Only when talking to someone about this Wi-Fi issue, did someone actually know how to back up everything. Of course by this time, I had to send the new phone back because Verizon charged me $400 before I got everything squared away. What a colossal waste of my time!

Parallel printer finally working using gutenprint, but too slow!

I finally got my HP LaserJet 4 Plus to print through a usb to parallel cable using gutenprint. But it stops and waits after each page. Any way to speed it up?

I suggest you try the alternate USB driver "usbtb."
http://sourceforge.net/project/showfiles.php?group_id=1537
If that doesn't help, maybe that's the limit of this printer.

HT1766 I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please a

I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

There is something Definitely wrong with iOS 7 regarding DATA USAGE being logged to wireless carrier in for WIFI instead.
I read all the previous replies and same issue.
I rarely use my mac to sync....its all wifi sync for the last 2 years....never had this issue before... and i know it began with iOS7.... here is why....
My iPhone was at home when I updated to iOS7 connected to wifi...but it logged Data Usage to Rogers Wireless (700MB approx)...data will never do an update over 50mb in app store (it gives the warning to use wifi) I play a lot of games and pay for them so I always update through App Store. 2 weeks later, simposons halloween update (650mb)...at home, using wifi.
Rogers told me there was 700+mb data usage on the day of update and 650+mb data on oct 1.st (tapped out).
Went over my 6GB plan and paid the fees.
This has never happened before...It must come to apples attention by now...

I am U.S. iPhone 4S user traveling in China. Data speed is too slow to be usable. Verizon says that it because iPhone 4S connects to strongest signal even if slowest. Any work arounds for this design flaw?

I am U.S. iPhone 4S owner traveling in China. Data speed is too slow to be usable. Verizon says that is because iPhone 4S connects to strongest signal, even if slowest (virtually non-existent) data network. Does anyone know how to work around this design flaw?

I spent 2 months in china with my old iphone 3gs. Both China Unicomm and China Mobile were accessible through my US phone. (for you other users, yes my phone bill was sky high, but it's a small price to pay when you get instant access to your wife while you are gone... and to be able to use the google translate app). I had a GSM phone (obviously) and had the ability to choose what carrier I wanted my phone to connect to (the same thing was available when I was in italy as well).
it was under
general-> network> then there was a new field (that does not normally show up when in the US) that listed the available networks to connect to. my phone always attempted china unicomm first, and switched to china mobile only when unicomm was unavailible.
but if wjosten is correct (and i imagine he is), cdma phones may not be able to choose what network to connect to.

Safari 5.1 too slow to print tab content?

Since Safari 5.1 I do have a problem with the JavaScript function window.print() in new tabs
For instance:
win = window.open();
win.blur();
self.focus();
win.document.open();
win.document.write('<html><head><meta charset="UTF-8"><title>test</title>');
win.document.write('</head><body id="print">some content here</body></html>')
win.document.close();
win.print();
win.close();
This code opens a new tab and the Safari print popup but without any content. Safari even generates multiple pages when the content requires more pages. But all pages are blank.
First I thought my print stylesheet isn't compatible with the new webkit engine or something like that.
But it turns out Safari is too slow with the .print() function and already closed the tab before the content could be rendered.
So I fixed it by setting a timeout
setTimeout(function() {win.close(); }, 1000);
Is there any chance that this problem could be fixed in general?
Thanks!

Hi everyone, first thanks for helping...
My SSD is 256GB and it still has 128GB of free space for now... So I don't think this is my issue.
Then I tried the the reset thing (good tip, I didn't know about that), but it's still the same. I didn't try the virus scanning, because I'm on a Mac and don't have one installed. I just let the OS dealing with it.
I think it's a graphic issue. Whenever I clic onto a folder, inside of Bridge, it's like nothing happens, execpt I can see that the name dispayed onto of the app window changes. So Bridge DID actually get me into that folder, but the graphic interface doesn't show it.
If I use Exposé or Space then the change does appears.
So everytime I move into another folder, I drag my mouse to one corner of my screen to activate Exposé, then come back and here I am in the new folder.
But this trick doesn't work for preview. My preview window allows me to play sound from video files, but wont display any image for it (like if it was sound only files). Still images (jpeg, psd...) wont show up as well.
So it is definitly a graphic problem. The softaware is not slow, like I though at first, it just don't reflect what's going on on the interface.
When I click "about this Mac" to get info on my graphic card it reads:
NVIDIA GeForce 9400M
NVIDIA GeForce 9600M GT
Why do I have 2 of them? No idea... But I see guys online that have the same in their Mac...
I'm not sure to understand if I can or cannot update graphic card drivers for Mac... Usualy the only upgrades I need are coming from Apple, and my Snow Leopard is fully up to date...

XML Parsing far too slow. (How can I speed it up)

Hey everyone,
I am converting a site from ASP to JSP and there are a bunch of pages that parse an XML document display certain information from it. One problem is that the JSP implementation I have is far too slow. It takes ~6 seconds to load the page as we wait for it to process. I am using <x:parse> and <x:forEach> to process it using an XPath statement with the appropriate predicate ($dom/foo/bar/Route[ID > 999] for example)
One problems I think is the size of the XML document. All the data for different pages is pushed to the same XML file and we use maybe 5-10% of the data in any one parse. I have looked at XML filters a little bit but can't seem to find a good example or a clear explanation as to whether or not this will even solve my problem.
The root node has 5 children and the biggest one which takes up probably 3/4 of the document isn't even used by us.
My boss wants it to be as fast as the ASP implementation which was really fast. It is 100% custom and manually probes the XML document and can skip any children which it knows won't contain any leaf's we want (mainly that big one) and is nearly instant.
Does anyone have any ideas?
Thanks,
John

Hey guys, thanks for the responses and sorry it took so long to get back - I have been busy with school an all.
Well, first off let me say that everything in general seems far slower than what I would expect. I have eliminated different parts and everything I do eliminate seems to make is significantly faster. Does JSP seems relatively slow to you guys? I am serving it from a slower machine too but it just seems quite a bit slower than I would have expected and I don't feel I'll ever be able to match the speed of the ASP implementation.
However, I think there is light at the end of the tunnel. I believe I found the slowest part. Surprisingly, it is not the importing or even the parsing of the file. They seem like they could take at the very most 1/2 second and the whole file takes ~5 seconds to run. The part that is causing the most delay is the five x:set tags.
<x:set var="attrID" select="string($r/ID)"/>is one of them. If I replace them with a piece of servlet code to assign dummy values instead, it cuts the execution by 80-90%.
Any ideas why these may be so slow?
Also, do you think switching to a servlet implementation would be better? I actually use some servlet code that I mean to convert over to tags once I get it working. Shouldn't the tags be about the same speed and are considered the "better" way to do things if possible?
Thanks again,
John

Pdf file size increases when printing resulting in slow print speed.

I have a .pdf that is saved at 27MB. When I send it to an HP Designjet T520 36in printer the file size jumps up to 136MB and the printing is incredibly slow. This does not happen on all files on a few random ones. Any ideas on how to resolve this issue?

It's entirely normal for file size to increase. PDFs are much more compressed than print streams. For some printers the print size is almost constant (a huge bitmap), for others, it's a collection of graphical items and the size varies enormously. Rarely anything you can do.

LaserJet P3005dn speed to print is too slow

Similar Messages

Maybe you are looking for