Laserjet Pro 200 color m251n web interface password reset

In past days I changed ip range in my net and when I needed to set the new ip in my printer I discovered I forgot the web interface password.
My printer have not touch display and for security reason I disable uso of menù from display. now I need to reset it. For my is good reset the printer as factory config. could you help me?best regards

Hey , Welcome to the HP Support Forum. I see that you're locked out of your HP LaserJet Pro 200 color Printer M251n's Embedded Web Server (EWS). I would like to help. There is only one way to remedy this issue. I will private message you the steps to complete a reset that will ideally clear out the password. Note that completing this step will reset your printer's wireless configuration, ePrint address, and other customized printer settings. If you have created a custom @hpeprint.com address it will be permanently erased. For more information on custom ePrint addresses, click here. Let me know if this works out for you. I f I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thanks for reaching out. Have a great day!

Similar Messages

HP Laserjet Pro 200 color M251n unresponsive in Sleep Mode

Printer: HP Laserjet Pro 200 color M251n
Firmware: 2014-06-04 , Version 20140521
Problem:
Since the latest Firmware update the printer is unresponsive in Sleep/Standby Mode no Events (all configured to wake up the printer) will wake the printer up. Even to connect via Webinterfac the printer is not responding. Ping also Fails.
Tried to connect the printer to another Printer Switch Port/ wall plug changed network cables nothing worked.
The only solution is to hard reset the printer (power off/on) to get the printer working again.
Played around with the EcoSmart configuration but doesn't matter what is selected there its always the same that the printer stuck in Sleep/standby mode and won't responde.
Is there somewhere the old FIrmware to be downloaded to try a downgrade if this would help?
I really don't think there is anythink else I could try.
This question was solved.
View Solution.

we are on a comany network and I guess our network won't be the problem (cisco switches for our printer lan)
in the meantime we replaced the HP Printer with a small xerox printer as we still have warranty we might give it back to vendor.
I don't think there is any issue related with network settings if none of the wake up events are working.
Bad Firmware I would call it.

Ready 2 download error on Laserjet pro 200 color m251n printer

I have a laserjet pro 200 color m251n printer that suddenly gives "error 2 download" can anyone profer solution on how to clear this error.
I tried using the firmware downloaded from hp site but gives "Fatal erro 7 while erasing.
Please somebody help me. It's very urgent.

Hi Seun1965,
I see you are getting an "error 2 download" message and can not complete the firmware update. Please complete the steps in the following document; A 'Firmware Corrupt Ready 2 Download' Error Message Displays on the Control Panel.
If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c03109721.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check. Even if the printer is out of warranty I suggest still calling HP to see if there is something they can do to help.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP laserjet pro 200 color m251n reset

Hello, I receved my HP Lasejet Pro 200 m251n yesterday and unfortunately we did not get a good start together. When printing colors, the colors are not aligned. I have printed a few diagnostic pages that just confirm the issue. Reading the forums I found that recalibrating could be helpful. Unfortuately after ~15 recalibrations nothing changed. Some users on other model are reporting that a NVRAM reset could be a solution. Unfortunately I did not find a way to do this on my M251n. Can it be done ? Should I try it ? Or should I send the printer back ?
Thank you.

Hi @jbjoret ,
I see that you are experiencing alignment issues with this printer you just received yesterday. You ran multiple calibrations with the same issue. I can help you out.
Print a Diagnostics Page to see if you have the same results. Trying to determine if it is a hardware or software issue.
Go to Setup, Reports, arrow down and select Diagnostics Report.
Here is a screen shot.
I have provided a document with more steps for running a cleaning and checking print driver settings.
Troubleshooting Print Quality Issues.
Make sure the paper type is selected to the media that you are using, not the default setting unspecified.
Please provide the following information so I can assist you better.
What were the results of Print Quality Page?
What are the Ink levels?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
I can send you that reset information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Update the printer's firmware. Just to rule that out. HP LaserJet Pro 200 color Printer M251nw Drivers.
Select your operating system, click next, click the link for firmware.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet pro 200 color m251n factory reset

My hp laserjet 200 M251n has stoppped working, won't print and no display in LCD panel, only power light is on.
I'd like to try a factory reset but the only option in the manual is via the menus and the "OK" button which of course is not working.
Is it possible to do a cold (factory) reset on thsi printer?
Thanks.

Hi,
Please check your inbox for the steps on how to perform the reset.
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

HP LaserJet Pro 200 color MFP M276nw - No Embedded Web Server (Port 80 not even showing open)

The embedded web server on our LaserJet Pro 200 color MFP M276nw is not responding and a port scan of the printer shows that port 80 is not open. We have power cycled the printer and that did not resolve the issue.
Is there a way to check the status of the embedded web server through the control panel on the printer?
Are there any other steps we can take to restore the embedded web server?
Thanks in advance.

Hello csandrews68,
I see you have an LaserJet Pro 200 color MFP M276nw that the Embedded Web Server will not load, port 80 shows as closed.
I suggest restoring the network defaults on the printer:
From the home screen on the printer push Setup (wrench and gear icon)
Go to and select Network Setup
Push Restore Defaults
With defaults restored, connect the printer back to the network and try to load the EWS.
Let me know if that helped.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

LaserJet Pro 200 color MFP M276nw password recovery

I reset the password on my LaserJet Pro 200 color MFP M276nw months ago and have now forgotten it. How do I recover it or change it?

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you have forgotten the password on your Laserjet Pro M276nw. I can help you with that. What we will have to do is perform a factory reset on the printer. I will send you a private message with instructions on how to do that shortly. If you have any other questions please let me know.
I hope this helps and I hope you have a great week!

Identifying the scan file for the Laserjet Pro 200 color MFP M276nw on a MacBookPro

In order to scan to a file on my Laserjet Pro 200 Color MFP M276nw, I need to register a file on my MacBookPro that the scan file can be sent. The Mac is using Mac OS 10.10 which is claimed to be supported by HP. But, I am unable to provide the registration information so that the scan file can be sent to the Mac. Can someone help me with this problem?

Hi @NeilPayze ,
I see that you are having issues setting up the scan file. I would like to help you out today.
If you are trying to setup a scan to a network folder, please follow these steps:
Create a folder on the desktop.
Hold down the control button and click on the folder you just created and select Get Info.
Check Share folder.
Under Sharing & Permissions select Read & Write.
Close that window.
Go to the Apple, System Preferences, Sharing.
Check File Sharing, select the folder created, then select Read & Write.
Click on options.
Check Share files and folders using SMB.
Check Share files and folders using AFP.
Below check Account name.
Then click on Done.
On the same windows, with File Sharing highlighted, to the right of that under File Sharing: ON, write down the
IP address.
Then close that window.
Open the Embedded Web Server for the printer.
Click on the Scan tab.
Click on Network Folder Setup.
Delete any old entries.
Then click on New.
Display Name: Type in any display name.
Network Path: \\computer's IP\folder name
Example: \\192.168.22.104\scan
Username:Computers User name.
Password: Computers Password.
Then click on Save and Test at the bottom right corner.
Please let me know the results.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Issue on borderless printing using android HP ePrint app with HP LaserJet Pro 200 color M251nw

Hi,
I am trying to print a pdf document which is of A4 size (11.7 x 8.3 inches without any borders) from android tablet using HP ePrint app along with the printer HP Laserjet Pro 200 color M251nw. When it is printed on A4 sheet, it adds the border on all the sides around 12mm-left, 11mm-right, 8mm-top, 9.5mm-botton margins.
On the printer the firmware datecode shows 20121026, Also the ePrint app which I am using is latest and upto date.
Please let me know how to print the borderless print in A4 sheet.
Regards,
Jaya

Hello revlib,
Welcome to the HP Support Forums!
Turning off the Wireless Direct on the LaserJet Pro 200 color M251nw should have disabled the SSID from broadcasting. Since disabling from the front display did not resolve, let us try from the Embedded Web Server (EWS).
To access the EWS you need to enter the I.P address for the M251nw into the address bar of your web browser. The I.P address can be collected by touching Setup ()> Reports> Network Summary.
Once in the EWS, click Network> Wireless Direct Setup> select Off and Apply.
Let me know if this has help
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP LaserJet Pro 200 color MFP M276nw Wireless option is gone!!!

I have a HP LaserJet Pro 200 color MFP M276nw. The blue lit wireless icon used to stay on steady and all was fine for quite a while, then the Blue icon would start flashing like it lost it connection to the wireless router. I would just recycle the power on the printer and let it reboot. Usually it would connect with the router again but, it's been getting worse lately. I figured I would try to the latest firmware to the printer as maybe there was a clitch with the original firmware.........Well, now I get no blue wireless icon and the wireless menu disappeared from the touch screen. I tried to access the wireless settings in the web browser, the program said "this product does not support wireless connectivity.......WHAT?!!!!! I tried a "cold reset" on the printer to clear everything and still have no wireless option. I suppose its going to stick with the same firmware that was last installed. I did notice that the printer lists itself with an "N" at the end of the model # on any printed report instead of the "NW" its supposed to be. I did download the printer firmware from the Pro 200 color MFP M276nw support page. it's acting like it now has the firmware for the non-wireless version of this printer. This is the firmware I used
file name:
M276_colorMFP_Series_FW_Update-20140521.exe [1/1, 14.32M]
. Any Ideas how to fix this? Seems like this is the wrong firmware for this printer. Everything else appears to work ok.
Bob

****UPDATE**** After running a few copies through the printer the wireless feature showed up again. The printed reports started to show this printer with the "NW" at the end of the model number instead of just the "N". After a few minutes it all went away again. Seeing the correct model number show up for a few minutes made me believe the correct printer firmware is installed. To make this a short story, I ordered the wireless PCA assy (Small internal wireless circuit board, HP part #1150-7940) and replaced it. It's been working great for the past few days( since the board was replaced). Apparently, if the system does not see a working wireless board it defaults to the non-wireless model number and the wireless option disappears from the menu screen. The other thing is there apparently is no fault code that covers this type of failure.....frustrating, to say the least. I will update if this is not the fix but, it looks like I got it!
Thanks!!!!!!!
Bob

Laserjet pro 200 color mfp m276nw Scan to Email issue

My laserjet pro 200 color mfp m276nw claims email is not set-up. I have entered in the e-mail addresses to send the scans to, but it still claims it is not setup. How do I setup this feature? I already have the "Send an Email" feature working where it sends the scan "from" my e-mail, but I want to use the Address Book feature and just send to a specific e-mail.

HI @Username57 ,
I see by your post that you what to setup the scan to email on the printer. I would like to help you out with this issue today.
I have provided a document for How to Scan: From the Control Panel. Select Scan to an email.
If you are still having issues then go into the printer's Embedded Web Server by typing in the printer's IP address in your web browser and setup a Static IP and set the DNS address.
Click the Network tab, then click on IP4 config on the left side.
Click on Network Address (IP)
Select Manual.
Type in the printer's information and IP address.
Set the DNS Address Configuration as Manual. Under Network Information, it looks like you can change the settings there.
Set the preferred address as 8.8.8.8
Set the Alternate address as 8.8.4.4 and confirm the changes.
Try setting it up again.
If you need further assistance, just let me know.
Happy New Years!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro 200 Color M251nw : Wifi turned off but still broadcasting

Hello there,
First of all, forgive my English.
I have a HP LaserJet Pro 200 color M251nw, so it has wifi capability. Since the printer is plugged with an ethernet cable to my router, I don't feel the need to use the wifi embedded in the printer.
Thing is, when if I turn off the wifi on the printer, and even if I disable "wifi direct printing", I can still see the SSID of the printer on my home devices (HP-Print-a6-LaserJet 200 color).
I have looked on the forum and tried the "factory reset" by turning on, unplug both printer and wall socket, wait for 15 seconds... etc. It didn't work. I have also already installed the latest firmware.
Any help would be greatly appreciated! :-)
This question was solved.
View Solution.

Hello revlib,
Welcome to the HP Support Forums!
Turning off the Wireless Direct on the LaserJet Pro 200 color M251nw should have disabled the SSID from broadcasting. Since disabling from the front display did not resolve, let us try from the Embedded Web Server (EWS).
To access the EWS you need to enter the I.P address for the M251nw into the address bar of your web browser. The I.P address can be collected by touching Setup ()> Reports> Network Summary.
Once in the EWS, click Network> Wireless Direct Setup> select Off and Apply.
Let me know if this has help
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Unable to Print Wireless anymore HP LaserJet Pro 200 Color M251nw

I've owned my extremely good HP LaserJet Pro 200 Color M251nw for around 10 months now but all of a sudden it has stopped printing wireless. If I print via a USB it works fine. I have downloaded new drivers and Firmware, done numerious restarts on both mac/pcs and printer but this still hasn't fixed the issue. I have run a number of Network Tests and all are coming back OK. When I try to configure the machine using the Online Printer Utility it cannt connect to my network (even though the self diagnostic test on pritner tells me everything is OK. I am running a mixture of both Mac and PC's and cant print from any of my devices. Bonjour print is enabled on the pritner but i cant see a bonjour IP address on my Mac.
Printer is still under warrenty but obviously feel that this is a last resort.

Hi @bluemango,
I see by your post that the printer stopped working over the wireless network. I can help you with this.
Restore the network defaults on the printer.
Go to setup, network setup, restore defaults.
Power cycle the router and computers.
Then run the wireless setup on the printer.
Go to setup, network setup, wireless menu, wireless setup wizard.
Print off a configuration page, to make sure the printer has a valid IP address.
Printing a Configuration Report. Print the report from the printer's control panel.
If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer or Safari)
If it loads the printer's network page then the printer is on the network.
On the Mac, try and add the printer through Printers and Scanners or run the installation.
On the Windows computer, run the add printer wizard through the printers window or run the installation.
What operating system are you using?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problems with wireless connection on HP LaserJet Pro 200 color M251nw printer

Hi! I have a problem with my printer internet wireless connection. I do everything what is in manual for installation, but my printer won't connect to the internet. I have LaserJet Pro 200 color M251nw.

Hi
With the notes you have posted i see that you are unable to get on to printer apps, web services and eprint, please follow the steps given in the link given below and check the wireless connection and it should resolve the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03325484&tmp_task=solveCategory&cc=us&dlc=en&ju...
Regards
Aneesh
I Represent HP
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!...

Urgent: HP LaserJet Pro 200 Color MFP M276

Heeeeeeeelp! Urgent!
I'm looking for software and driver for HP LaserJet Pro 200 Color MFP M276.
At HP website, there is no download accessible.
Who can help me with a downlod-link ?
[Personal Information Removed]
This question was solved.
View Solution.

Hi @JerryHP ,
I see that you are having issues printing from the Laptop and iPhone, over the wireless network. I would really like to be able to help you resolve this issue.
Since the blue wireless light is flashing on the printer, it isn't connected to the network.
Run the wireless setup on the printer.
Go to Setup, Network Setup, Wireless Menu, Wireless Setup Wizard.
Print a configuration page to get the printer's IP address.
Printing a Configuration Report.
Select Method one.
If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer. Type the IPv4 address into your web browser's address bar. (Internet Explorer)
If it loads the printer's network page then the printer is on the network.
Download, save and then run the software installation. HP LaserJet Pro 200 color MFP M276nw Drivers.
Select your operating system, click next and click on the software to download and install.
Test the printer.
I have provided this document also for Setting Up the Printer for a Wired or Wireless network for the HP LaserJet Pro 200 Color M251 and M2...
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
The printer is capable of printing from Word and Excel, you might need to run the updates for Word.
Please provide in detail if you are still having issues, so I can assist you better.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet Pro 200 color m251n web interface password reset

Similar Messages

Maybe you are looking for