LaserJet Pro 300 color MFP automatic document feeder - page stops feeding with 1" to go

Scan page won't finish feeding when using the automatic document feeder. Leaves approximately the last 1 to 2 inches of paper in the scanner. The Scan ADF Paper Jam error message pops up. Seems like the page hangs/gets stuck once the page passes through the document feeder roller assembly. Haven't been able to find any information on what moves the paper through the scanner once it gets past this roller assembly.

@Debbie-M
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

HP LaserJet Pro 300 color MFP runs cleaning and Mis Prints Error with Printing above 5 pages

I have an HP Pro 300 Printer with New genuine cartridges. But when I print or make copies of multi page jobs it always comes up with a message on the screen which says "cleaning" and then give a "Mis Printer Error".The printer is out of warranty. The Print quality is excellent but the error it gives all the time is a major problem. Has anyone solution for this? Please help! Thanks

Restoring the defaults doesnt usually purge out the memory of a printer. You need a cold reset to complete that proceedure. Cold Reset steps:http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-Cold-reset/td-p/5060955 The video at the bottom of the first page is very helpful.

Set up HP LaserJet Pro 300 color MFP M375nw wireless printer

I switched computers, and set up the printer to the wireless network, however, I still can not print.

Hello Jill-UNS,
To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet Pro 300 color MFP M375nw is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime:
HP Support Center.
I hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Is there a way to reset the printer (laserjet pro 300 color mfp)

So I've had alllllll sorts of problems with my all-in-one. Often when I try to scan, it won't work, saying that it can't find the printer. Same when trying to print. I figured it was some sort of connectivity issue. I connect via my wifi network. So I tried to remove the software from my Macbook and now when I try to reinstall it, it can't find my printer. So I hook it up with a USB cord. Now it sees the printer, but it stalls out and won't connect... most of the time. At one point I got as far as the porting over my macbooks network settings over to the HP printer, but then it stalled out there. Any way to do a hard reset of the HP printer? I feel like something is going on with it's wifi abilities.

If it's really the colors, you can calibrate them using System Preferences Displays pane Color tab.
If it's actually the brightness, you cannot adjust it any brighter than the control allows on System Preferences Displays pane Display tab. The CCFL lamps used for the backlight do decrease in brightness over time (unless they are the new LED type found in some of the newer MacBooks and Cinema display)

Sleep mode LaserJet Pro 200 color MFP M276nw

Hello, My LaserJet Pro 200 color MFP M276nw seems to have gotten into some sort of "sleep" mode:When I send something to the printer, it no longer prints, until I touch the LCD screen which seems to "wake it up," at which point it prints the documents in its queue.Any information as to how to get it out of this mode would be appreciated. Thanks.

Hi hpr7busr, Welcome to the HP Forums.
I see that you are having issues with the printer waking up from sleep mode.
I will be happy to help you. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) How is the printer connected? (USB/Ethernet/Wireless) It may not be the printer, it may be your router's inability to wake the printer if the printer is networked.
What router are you using?
Can you get into its settings?
If you can then look for and enable "Multicasting".
If not you will have to contact the router company.
Disconnect the routers power cable next time this happens, wait 10 seconds, then reconnect the power cable. Wait till it's ready. Try printing again. If it prints then it is a communication issue between the printer and the router not recognizing the printer. I have provided a document to setup a static IP address on the printer for better communication between the router. Printer Does Not Maintain a Wireless Connection.Solution three: Assign the printer a static IP address. This information was provided by the manual. LASERJET PRO 200 COLOR MFP. Starting from page 137. The product automatically wakes from the auto power-down mode when it receives jobs or when
you use a button on the control panel. You can change which events cause the product to wake.
Open the following menus:
œ System Setup
œ Energy Settings
œ Auto Power Down
œ Wake Events
To turn off a wake event, select the event and then select the No option or yes. Check out the settings to make sure they are set properly. You can set the sleep delay on the printer, but the default setting is 15 minutes.
1. From the Home screen, touch the Setup button.
2. Open the following menus:
● System Setup
● Energy Settings
● Sleep Delay
3. Select the time for the sleep delay.
Let me know how this goes for you!
Thank you for posting on the HP Forums.
Have a great day.

Broken document feeder on LaserJet Pro 200 Color MFP M276

I love this LaserJet Pro 200 Color MFP M276 printer. A few weeks ago, it fell onto the floor from a low platform. The top part with the automatic document feeder became completely separated from the rest of the unit. A few small pieces of plastic that hold it upright broke off. I have saved those pieces.
The printer still works perfectly as a printer and scanner. However, the automatic document feeder does not work at all now. I know there is some sort of wire that connects it to the main body of the printer so that it has power. But, I don't know how to re-connect that wire so that the automatic document feeder will work again.
Please help with this. I hope the repair is simple and inexpensive. Thank you.
Doug

Hi @DougSF ,
I see that a part is broken for the ADF. I can help you with this.
Please call our technical support to inquire about a repair or a replacement printer, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Contact HP.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet pro 200 color MFP M276n not printing PDF documents

Hello
I am having problems printing PDF documents from our hp laserjet pro 200 color MFP M276n.
I get a blank sheet of paper and a message on the printer saying 49 service error - turn off then on
I can print word/excel documents.
Many thanks
Karen

Hi,
As I understand you get a 49 error while printing PDF document from hp laserjet pro 200 color MFP M276n.
Kindly follow these steps to resolve the issue.
1. Open the PDF document you want to print.
2. Click File > print > Click on the Advanced option > select the print as image option.
though I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution

Squeaking when my HP LaserJet Pro 400 color MFP M475 feeds from Tray 1

There is a low pitched squeaking when my HP LaserJet Pro 400 color MFP M475 feeds from Tray 1. We use this tray for printing individual envelopes. Is there a part that I should replace or clean? Trays 1 & 3 feed with no noise.

Noise issues are difficult to troubleshoot remotely and they could easily misguide even when we are close to the device.
Please do confirm if the noise is a grinding noise or squeky/humming noise.
As you have mentioned that it happens only while calibrating, hence I would suggest you to re-check & validate your toner cartridges. One of the toner cartrdige may be defective and causing this issue.
If not the toner cartridge then it would be one of the printer hardware component which is in question, hence an HP tech. might need to perform physical inspection of the device and the error condition.
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP)

LASERJET PRO 200 COLOR MFP Scanning Multiple Pages

Just got a LASERJET PRO 200 COLOR MFP, I am trying to scan from the document feeder, but when i scan it only scans the scanner glass, it doesnt pull from the feeder...any suggestions?

Hi @asherwood1 ,
I see that you are unable to scan from the ADF, it will only scan from the glass. I will try my best to help you out.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
Are you getting any message on the printer when the document is loaded?
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
I have provided a document for the ADF not pulling through the paper, it might not be your exact model, but you can still follow through this document.
'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o...
Update the printer's firmware.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet pro 200 color mfp m276nw scan issue

Hi I have problem to use scan software from my PC to scan document and save to my PC. Every time a error message pop up : Scanner Unreachable. I am using wireless and can print without any problem, even I turn off the firewall and connect with the printer cable, it still doesn't work. please help me solve the issue, I use scan function a lot. Thanks in advance.

Hi , Welcome to the HP Support Forums! I see that you're experiencing scanning issues with your HP LaserJet Pro 200 color MFP M276 Printer. I would be happy to assist you with this. If you're able to print, but cannot scan. It sounds like the HP Software is corrupted. The Print and Scan Doctor might be able to correct the issue for us.Please download and run the Print and Scan Doctor, it will likely diagnose and resolve the issue you are experiencing. What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages) If the Print and Scan Doctor doesn't fix the issue, please uninstall and reinstall the HP Software.HP Single-Function and Multifunction Printers - Uninstalling the Printer Software.Important! Please use the Printer Install Wizard. The HP Printer Install Wizard automatically finds the best available print driver for your HP Printer. Download and run Printer Install Wizard () a free tool from HP. When this link is clicked, HP Printer Install Wizard is downloaded using your Internet browser's download capabilities. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

Want to print remotely to my HP LaserJet Pro 100 color MFP M175nw

Hello! I have a
HP LaserJet Pro 100 color MFP M175nw printer in my office. It is connected to my wifi network from the office and i can use it from several laptops from office with no issue.
Now i want to be able to print and scan papers from my home pc also which is connected to my home wifi network.
I found there it is possible to print pages over internet. Except hpeprint option, how can i add printer from office to printer list from my home pc.
Please help me.
Thanks!

Hi Tolick,
Thank you becoming a member of the HP Support community. I understand that you have an HP Laserjet 100 at your office and you would like to be able to print to it when you are at home.
Super_Dave is correct with the solution he gave you. I just wonder if you have set up the ePrint feature of your Laserjet yet and customized the ePrint email address? If you have then using the ePrint software that you installed on your laptop should allow you to print to your office printer from home. The instructions on how to do this are in the HP ePrint Software User Guide on page 16 in the section titled "Use HP ePrint (Windows)".
If you haven't set up the ePrint feature of the printer I have included a two documents for your reference. The first one is how to get the claim code and the second is how to setup the customized ePrint email address. This may the step that is missing to make the ePrint software work for you.
HP ePrint Software User Guide
Getting the Printer Claim Code
Setting Up a Custom Email Address for ePrint
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP LaserJet Pro CM1415fnw color MFP printing & scanning problems

Ever since I purchased this multifunction color printer, it has been unreliable. My Mac Mini running the latest OS (currently Mavericks OX 10.9.2) will be printing and scanning fine, and then at some point it can't find the scanner, the printing slows to an amazing crawl, and then the printing stops altogether. I have repeatedly attempted to set up the printer under Preferences and have installed the latest drivers from the HP website. When that works, it's a short-term fix; eventually, the bugs come back. The darn thing won't scan or print again, and I'm pretty fed up. I paid a premium price for a premium color multifunction printer for my home, and it has been nothing but a problem. Help!

Hello StoopBoy,
Welcome to the HP Support Forums.
I see that you have an HP LaserJet Pro CM1415fnw color MFP being operated on a Mac 10.9.2. The CM1415fnw will not maintain a continual connection to the computer displaying errors and very slow printing. Since you have done a great job already troubleshooting the issue some of the steps I suggest will have already been done by yourself.
I suggest you take these steps to help resolve the issue:
1. Reset the Printing Systems by following this Apple Document: Mac OS X: How to reset the printing system.
2. Uninstall the HP LaserJet Pro CM1415fnw color MFP with this HP document: Uninstall HP printer software.
3. Repair disk permissions on the Mac.
4. Check for and install any and all updates on the Mac.
5. Downlaod and Install the printer HP LaserJet Pro CM1415fnw color MFP software.
I hope this helps and will allow you to have more continual functionality with your Laserjet.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Laserjet Pro 100 Color MFP M175nw Print missing/faded down centre of every page

HP Laserjet Pro 100 Color MFP M175nw. Operating on Windows 7 from my laptop wirelessly. Just bought this new a few day's ago and each page of print has about 20mm wide streak missing print running down the centre. what can I do to correct this problem? I have tried printing a cleaning page a couple of times and calibrating color from the Print Quality Menu also a couple of times but this has made no difference. I'm using a Premium quality paper for use in laserjet printer's. Could someone please advise me what I can do. Thanks in anticipation.
This question was solved.
View Solution.

Hi Watcher35,
I see that the new Laserjet Pro 100 MFP M175NW is missing print down the center of the pages, you have ran cleaning and color calibration but the issue is not resolved.
Would this be an accurate example of the issue: but with the "Bb" would be completely missing?
This HP document: Resolving Print Quality Issues may take you though some of the same steps you have already done, I suggest not skipping any steps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP LaserJet Pro 200 Color MFP M276nw scan to mail with google.

hello,
i got a HP LaserJet Pro 200 Color MFP M276nw printer. and i want to use the scan to mail feature.
But when i am setting up my google account as head account where the printer should send the mails from it doesn't work. i don't get the scan's into my mail. does somebody got a user guide for me how it is done and with the settings i have to use?

Hi @dennieboy96 ,
I see by your post that you would like to setup the scan to email. I would like to help.
Are you trying to setup the scan to email from the printer or from the HP Software?
I have included both documents.
Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp Laserjet pro 200 color MFP M276nw

Im having an issue with the installation of the software and the scanning of the printer. When i try to do a full install it goes well up to the part where i have to reconnect to usb port to my computer, at that point the installation starts to go very, very slow. When it get to 99% it gives me a fatal error saying i have to restart my computor and do the process again. i have done it multiple times with no success. I followed by going online and getting the drivers from HP and did the installations individually. I am finally able to print. When i go to scan a documents i only get 3 options on the printer: scan to usb, scan to network and scan to wireless. I dont have anyother options and i have downloaded the drivers for the scanner. I dont know what to do anymore.
Thank you

Hi @HPuser84,
I will do my best to help you be able to scan with the Laserjet pro 200 color MFP M276nw printer.
There are only 3 options from the printer to scan to, scanning to PC isn't a option with this model, if you want to scan from the computer, you would have to use the HP Scan Software on the computer.
I have provided a document for how to scan through the HP Software and from the printer's control panel.
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers.
Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
If the scanning software and drivers still didn't fully install and you had the fatal error again, uninstall the software.
Disconnect the USB cable first. Uninstalling the Printer Software.
Then start the installation again, immediately follow the steps in this document after connecting the USB cable please.
A Fatal Error Displays During Software Installation. Disregard the printer model. This should allow the software to fully install properly.
Please let me know if you require any additional assistance.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro 300 color MFP automatic document feeder - page stops feeding with 1" to go

Similar Messages

Maybe you are looking for