Laserjet Pro P1606dn running on a dell using XP Pro won't hold the default printer setting

Laserjet Pro P1606dn printer
OS is XP Pro
set it as the default printer but that setting keeps changing
How to fix this?
thanks

Yes, you need your own copy of WinXP (I used the one that came with VPC) but I'm afraid I have some good news/bad news to report. The good news is that WinXP does run a bit faster than VPC did on my dual processor G4 - the bad news is that XPs hardware detection DOES NOT - and I could find no way t force it - to recognize any USB or Firewire devices. Because I use Windows primarily to connect to USB GPS devices, this was a real letdown (and would be to users who need to, oh, I don't know, PRINT from Windows).
I'd love to hear from anyone has Windows actually functioning under OpenOSX Wintel - the website only goes as far a getting it to install and running Explorer (which I was able to do). I also had numerous keyboard problems: sometimes Windows would accept no input from the keyboard, sometimes it would reverse the caps lock key (on produced lowercase letters, off all uppercase). It also does not recognize the Apple Mighty Mouse as a two-button mouse. A number of these problems were - somehow - fixed by VPC which I never had a problem with when it came to USB devices (at least it DOES recognize a 'network card' and I can use Internet Explorer - whoopee!).
I'm going to play with this some more before throwing in the towel but I'm not so certain that I'm going to work towards the dual boot solution until I hear that Windows and Windows apps actually function - like being able to print or recognize a USB device.
Just getting Windows to install and run is of little good if it doesn't actually provide simple functionality.
I may copy and paste my original post in the Windows compatibility forum - see if any of those folks have found a working solution,

Similar Messages

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

I have a MacBook Pro and I created a movie using imovie but once I put the DVD back into my computer it said it was blank! Why?

I have a MacBook Pro and I created a movie using imovie but once I put the DVD back into my computer it said it was blank! Why?
Please HELP!!!!

AFAIK, you can't author a DVD using iMovie - again, AFAIK, you need authoring software such as iDVD or Toast Titanium or something similar.
Clinton

Is there a way to change the default print tray on an HP LaserJet 500 color M551 Printer

Hi
Is there a way to setup the default print tray for a HP LaserJet 500 color M551 printer to be tray 2 printing both online and direct?
If so what would be the best way to go about implementing it?
Thanks
This question was solved.
View Solution.

Usually, you can change the default paper trays through the control panel and through the Embedded Web server (EWS).
Check the settings on your control panel. Here is a link to the User Guide, check out page 94 and see if that helps you out.
m551 User Guide
For the EWS, put the printer IP address into your browser, then go to the tab that would list tray settings. Not sure exactly which tab has it for this printer series, but on other printer series it is on the system tab under paper setup.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

[svn:bz-trunk] 17772: Update the url in the tests to use a relative path instead of the default localhost : 8400 so that the tests can pass on appservers other than the default Tomcat .

Revision: 17772
Revision: 17772
Author:   [email protected]
Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
Log Message:
Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

Revision: 17772
Revision: 17772
Author:   [email protected]
Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
Log Message:
Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

CR XI R2 Sp6 - How do you change the default printer used by the Viewer?

CR XI R2 Sp6
.NET
VS2005, C++
The app selects printer for the job as m_Report->PrintOptions->PrinterName = ss_Device;
This works nicely for printouts to the printer, but is ignored by the viewer. There, the machine default printer is always selected when I hit the print button.
Found this which is sortof similar:
http://forums.sdn.sap.com/thread.jspa?threadID=1275149
Is there any way to fix this? If no, then is it fixed in more recent versions of CR?

All of that above can be changed at runtime, but you'd somehow need to figure out what the default printer driver is on each machine and then assign it to the report.
Yes,but that is exactly what I do. The app normally uses the Windows default printer just as any C++/MFC app will do. On the file menu there is an option to select printer which calls CWinApp::OnFilePrintSetup(); which sets the application default printer setup.
In the app there is a function to retrieve the default printer:
CString CLpApp::GetDefaultPrinter()
     PRINTDLG     pd ;
     CString          printer("Failed") ;
     pd.lStructSize = (DWORD)sizeof(PRINTDLG) ;
     BOOL bRet = GetPrinterDeviceDefaults(&pd) ;
     if (bRet)
          // protect memory handle with ::GlobalLock and ::GlobalUnlock
          DEVMODE *pDevMode = (DEVMODE*)::GlobalLock(m_hDevMode) ;
          printer = pDevMode->dmDeviceName ;
          ::GlobalUnlock(m_hDevMode) ;
     return printer ;
When I print, I do:
void CSkrivDlg::StartReport(CLpReportJob^ jobb)
     jobb->SelectPrinter("",theApp.GetDefaultPrinter(),"");
     if(m_tillSkrivare)
          jobb->OutputToPrinter(1);
     else
          jobb->OutputToWindow("Fönsternamn", 0, 0, 200, 200, 0, NULL, NULL);
This works correctly for OutputToPrinter(1);, but not for OutputToWindow() which are simply wrappers for the CR functions:
bool CReportJob::OutputToPrinter(int nCopies)
     bool rc = true;
     try
          m_Report->PrintToPrinter(nCopies,true,0,0);
     catch (Exception ^e)
          TRACE("
%s",e->Message);
          m_LastError = e->Message;
          rc = false;
     return rc;
// OutputToWindow()
// a,b,c,d = Fönsterkoordinater eller noll för default
// style = flaggor för fönsterposition
// window = fönster efter vilket vi dyker upp
// child = rapportfönstrets handle om vi vill ha den
bool CReportJob::OutputToWindow(CString Namn, int a, int b, int c, int d, int style, CWnd* window, CWnd **child)
     bool rc = 0;
     CString title="Dummy1";
     title = m_Report->SummaryInfo->ReportTitle;
     CFloaterDlg *Floater = new CFloaterDlg(NULL);               // TODO: Get window
     Floater->Create(IDD_FLOATER_DLG, NULL);
     if(Floater != NULL)
          m_Report->ExportOptions->ExportFormatType = CrystalDecisions::Shared::ExportFormatType::PortableDocFormat;
          Floater->m_Viewer->ReportSource = m_Report;
          Floater->m_Viewer->Zoom(theApp.m_ScreenZoom);
          // Sätt fönsterrubrik från rapporten
          Floater->SetWindowText(title);
          // Puffa på så att den kan ändra storlek på Crystal-kontrollen
          Floater->Size();
          // Visa fönstret om det är stängt
          if(!Floater->IsWindowVisible())
               Floater->ShowWindow(SW_SHOW);
          rc = true;
          if (child!=NULL) *child=Floater;
     else
          AfxMessageBox("Kunde inte skapa fönster för utskrift",MB_OK);
          rc = false;
     return rc;
Floater is simply a dialog that holds the Viewer control.
For some reason does the Viewer not obey the printer selection done in the report

When changing the default printer in windows vista why doesn't the default printer change in firefox (firefox was running when the default printer was changed)?

I am not sure whether or not this is a bug or a feature, but I was running firefox on my laptop. I then went to add a new printer and set it as a default printer. When I went back to firefox to print, it did not automatically choose that new default printer as the printer of choice. I then had to choose the new printer manually to print to. This is merely a convenience issue but thought I would bring it to the attention of Mozilla in case.

Hello bradleesargent
as i can see the note in the kb article ([https://support.mozilla.org/en-US/kb/how-print-websites#w_print-window-settings Print window settings]) ''The default printer is the Windows one. When a web page is printed with the selected printer, it becomes the new default printer.''
do you have your previous printer also, or you uninstall the previous printer and then install the new one and make it default ?
I think firefox must be closed when you set up a new printer. Do you have it open when set up the new printer ?
thank you

Why doesn't printing use the default printer?

I have two main printers to use at home and whenever I print a web page, Firefox automatically prints using the non-default printer. If I select the default printer from the drop down list, it works fine. I shouldn't have to select the default printer every time I want to print.

Note that NONE of the replies answer the original question.
The key word in the question is "'''Why'''" and "default printer" refers to the system's default printer.
Why does Firefox behave differently than any other Win app when it comes to printing, ALWAYS use the system's default printer UNLESS the user changes it (''and NOT memorize the choice'').
To put it another way, '''Firefox should NOT always use the last printer selected'''.
'''This non-standard printing behavior should be changed.'''

Excel 2010 not using the default print settings

Currently got an issue with Excel 2010 not using the default print settings for a couple of users on our network,
basically when pressing cntrl P or selecting the print option from the file menu the printer settings are different to the print settings selected in the devices and printers menu, we have checked the print drivers etc but this has still not resolved the
issue, all other office programs are fine and also other users are reporting this issue more and more with different printers,
tried restarting print spooler service and re-installing office but this has come to no avail,
any ideas would be much appreciated!

Hi,
This issue occurs because the Page Setup settings that you specify in your file override the settings that you specify in the printer driver properties.
To work around this issue, do not specify the paper size, page orientation, or page margins in the printer driver properties. Instead, specify these settings in your workbook.
To specify these settings, follow these steps:
1.Start Excel, and then open the workbook you want to change.
2.In Microsoft Office Excel 2010, click the sheet that you want to print, and then click the Page Layout tab. In the Page Setup group, click Page Setup to open the Page Setup dialog box.
3.Click the Page tab.
4.Under Paper size, click the paper size that you want.
5. Click Options button and in Printing Shortcuts tab, in the Paper source area, perform one of the following steps: ◦If the printer can automatically select the correct paper tray to use, click Default tray in the First page list, and then click Default
tray in the Other pages list.
Default tray is the default setting in both of these lists.
◦If the printer cannot automatically select the correct paper tray to use, you may have to select the paper tray that contains the paper size that you selected in step 4.
To do this, click the appropriate paper tray in the First page list and in the Other pages list.
6.If you want to change the page orientation or its page margins, click the Finishing tab.
7.Select the options that you want.
8.Click OK.
9.Repeat steps 2 to 8 for each sheet of your workbook for which you want to specify settings.
Jaynet Zhang
TechNet Community Support

Using parallels how do you stop the default from opening in excel mac

I am using parralells with my mac book pro, attempting to open a file in windows excel but the file keeps opeing in excel for mac,
I had this working before but cannot seem to make this work now argg
any help is welcome

That is a simple WIndows setting you need to adjust. Your Parallels seems to have changed the default "open with" program in your windows installation. The way to fix it depends upon your version of Windows, but you can probably get there my holding down teh shift key and clicking the right mouse button on the file you are trying to open. Doing that should add a new line to the right-click menu "Open with..." select that and in the pop-up select your windows app you want to use, and check the checkbox to make it the default app for that file extension.

Using a session object to hold the value of a record set?

Hi,
I'm trying to hold the value of a record set (or literally the content of a column in a query in a db) in a session variable so that I can call on this later and insert into another table.
I'm not sure of the correct syntax, I've already made a connection to the DB. I'm trying the following but it doesnt seem to like the code:
<% session.setAttribute("code",rs("column_name")); %>
<%String attrib =
String.valueOf ( session.getAttribute("code")); %>
Hello <%= attrib %>
Any ideas, I dont know how to reference the record set, I declared the recordset previously as rs. Help! Can't find examples anywhere on the net!

So just to recap. I appear to be seeing the column name "custorderno" within the Microsoft Access query "lastcust". But I get "no data found" when I run the following code (which I have sectioned off)
<!-- connect to database and lastcust query --!>
<%
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
Connection conn = DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=C:/Tomcat/jakarta-tomcat-4.1.31/webapps/ROOT/Oatcake.mdb","","");
Statement statement = conn.createStatement();
String sql = "SELECT * FROM lastcust";
ResultSet rs = statement.executeQuery(sql);
while (rs.next()) {
%>
<TR><TD><%= rs.getString("custorderno") %></TD>
</TR>
<% session.setAttribute("code",rs.getString("custorderno")); %>
<% String attrib =
String.valueOf ( session.getAttribute("code") ); %>
Hello <%= attrib %> [B]
<%
%>
</TABLE>
<%
if (statement != null)
statement.close();
if (conn != null)
conn.close();
catch (Exception e) {out.print(e);}
%>
</BODY>
</HTML>
No as mentioned I am (as you can see) declaring everything as a string when in actual fact the contents of the "custorderno" within the query is set to a autonumber within MS Access.
The while loop does work by returning the contents but the session object part is not working correctly with the following result returned:
[B]java.sql.SQLException: No Data Found
Help please!

Info on whether to use ext. Netegrity tool or the default provided by SAP

Hi,
Can anyone give me some info. as to which would be better or which would SAP recommend as Best Practice - whether to use external <b>Netegrity tool for Authentication & Security</b> or the default provided by SAP Web AS.
Thanks & Regards,
Jeetu

Firstly, I completely agree with Nicks comments and in any case the original question was Best Practice and desgin phase not technical "how to" implemenation.
@Jeetendra,
Actually, overall the decisions are normally made for you as a basic project requirement eg. Constraint: Users need to access Portal from a web link in intranet site secured by Netegrity without reauthentication. So as mentioned above its usually a pure SSO constraint. Thereafter it is more of 'How best' and what are the technical limitations. Otherwise there is no real need to make life more difficult. Could you describe why you are having to make this feasability study?
Since Netegrity is an external component, Performance will never be a reason to include Netegrity as it only adds complexity. The performance impact will depend on agent configuration and policies and size of Netegrity infrastructure etc. This needs to be evaluated with the Netegrity team based on the estimated number of concurrent users/requests etc. Concrete info will not be possible unless you do a load test with / without Netegrity and compare results.
Security aspects have to be looked at across the whole spectrum based on the local environment and requirements. Netegrity is complementary to WAS security but can actually reduce security eg. If basic header authentication is configured without additional checks. It also may or may not be required to cover requests to back end systems.
Take a look at the SAP security guide.
If you are still unsure of how best to proceed you may need to get specialist assistance as I doubt someone will be able/willing to provide the detail you require without some kind of intervention.

Simply accounting want to get new macbook pro and run this software anyone use it with success?, simply accounting want to get new macbook pro and run this software anyone use it with success?

If anyone is useing this product I would love to hear from you. I want to change over to macbook pro for our small company but we are useing simply accounting on our current windows based pc

I don't believe this program runs on a Mac. if it does it would be running using a Windows emulation program like Parallels or VMWare or running in Windows directly through a Boot camp partition. In any case it's running in Windows so you have all the experience you need.

Premiere Pro CC running slow on my new Mac Pro

I just upgraded my system to the new Mac Pro(Darth Vader Helmet) and its running slower then my 5 year old tower!? Ill take 15-20 seconds to save a project(small project). The playback is still a bit jerky. Overall it just seems to be lagging a bit.
Here are my comp specs:
OS 10.9.2
3GHZ 8-Core Intel eon 5
64 GB 1867 MHz DDR2
Does anyone have any idea why Premiere isnt blazing!?
Thanks
R

Jim Curtis wrote:
Thanks, Jason, that's what I was wondering about. Generally, people post to forums when they have problems.
Yep. That's usually what happens. My review will be centered around my usual "benchmark" of editing 2 AVCHD inputs, one PiP'd into the other, synced with an external audio source, and then exported to an h.264 MP4. CC on my current Mac Pro (modified dual 3.46Ghz Xeon, 48G, nVidia GTX570) takes that task about 1/2t, if t = length of video. Which is pretty damned good. I'm hoping the dual GPUs will help scale that export task down a bit more. I don't expect it to hit 1/4t, but.. hey, maybe I'll be surprised?
I make about 60% of my living from Pr, and the rest from Ae and other apps (mostly Adobe).
Given the lack of CUDA, at the moment, I don't expect the new Mac Pro to be a stellar performer with Ae specifically. I assume that Adobe is working on OpenCL'ing Ae as much as they possibly can. But from what I understand, it ain't there yet.
(I'd need a TB monitor and PCI extender, too).
I can understand the need for the PCI extender, but why the TB monitor? I'd in no way even remotely consider one of those, just given how ridiculously priced they are. There's no need for one. Does your display have a DP input? You're all set. No? It has HDMI instead? Still all set. It's dual-linked DVI that becomes problematic.

How to keep screen appearance of pro 6.0 & 8.0 when using X-pro

I've installed x-pro, each new pdf now opens opens a new screen window.
My old versions 6.0 - 8.0 have the "classic" screen appearance with all pdfs opening in same window with option to view each doc within same window.
I'd also like the look of the old style toolbars.
Can I customise x-pro to give me the screen view and tool bars I'm used to from my earlier versions of pro?

You have a lot less control over the toolbars with Acrobat 10.You can configure the QuickTools toolbar by adding tools to it, but that's it.
Acrobat 9 introduced the multiple document interface (MDI), and it is all that's available.

Laserjet Pro P1606dn running on a dell using XP Pro won't hold the default printer setting

Similar Messages

Maybe you are looking for