Last 30 days calls need to be displayed in the report.
Hi Experts,
I want to view a report which will display the calls created 30 days before the current date.
Can anyone tell how do I get the (Current Date - 30 days) call details in the report please. I do not want to write any routines for it.
Please help me achieve this.
Thanks
Hi
you can either use the RKF using calday and offsetting to -30 or
you can write the customer exit variable on the cal day
pls refer to the below link which provide step by step documnet on customer exit
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d?quicklink=index&overridelayout=true
Similar Messages
-
Total time taken for the quiz needs to be displayed in the report
Hi,
I would want tthe total time taken for the quiz to be displayed in the report...Let me know if its possibleHi,
Please try this.
Define three user variables - StartTime, EndTime and Duration.
At the start of the quiz ('On Slide Enter' of the first Question Slide). have an advanced action with the following actions.
Assign: StartTime with cpInfoElapsedTimeMS
Continue
At the end of the quiz ('On Success' or 'On Failure' of the last Question Slide or 'On Slide Enter' of Result Slide), have this advanced action.
Assign: EndTime with cpInfoElapsedTimeMS
Expression: Duration = EndTime - StartTime
Expression: Duration = Duration / 1000
Continue
The variable 'Duration' will have the time taken by the user for the Quiz in seconds.
Let me know if you have any queries.
Thanks,
Thejas -
All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers! -
I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...
Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?
-
My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account (a number of times..) and setting the account back up? and it still only picks up the old messages? Anyone else having tis problem? Any ideas how to fix it?
This just started happening for no reason...no changes to the phone or Ipad?my iphone and ipad will not send or receive emails or messages for the last few days. it is telling me that cannot connect to server
-
For the last 10 days I have been unable to open the Mail account on my eMac (MacOS10.4.11). When I click on the icon in the Dock the only option I get is "Force quit" and the main Mail bar will not open any choice. Any ideas?
You can setup Mail for iCloud on the eMac.
Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password -
Needed sample program for emailing the report output
hi all,
neede sample program for emailing the report outputHi,
Please refer this program for sending e-mail with attachment.
***INCLUDE ZHZLPP_CLZSN_DAILY_MIS_PRINT .
*& Form print
* text
* --> p1 text
* <-- p2 text
FORM print .
DATA: wa_output_options TYPE ssfcompop,
wa_control_parameters TYPE ssfctrlop,
t_otfdata TYPE ssfcrescl,
t_pdf_tab TYPE TABLE OF tline WITH HEADER LINE.
DATA: t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i.
DATA: w_bin_filesize TYPE i.
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
w_return TYPE ssfcrescl.
DATA : l_mean TYPE p DECIMALS 2,
l_mean1 TYPE p DECIMALS 2,
l_mean2 TYPE p DECIMALS 2,
l_mean3 TYPE p DECIMALS 4,
temp TYPE p DECIMALS 2,
v_header LIKE zmisdisp3-remark,
disp_d_kwh_mt TYPE zmisdisp5,
disp_m_kwh_mt TYPE zmisdisp5,
disp_d_mt_mw TYPE zmisdisp5,
disp_m_mt_mw TYPE zmisdisp5,
l_bptarget(16) TYPE p DECIMALS 2,
l_act_d(16) TYPE p DECIMALS 2,
l_act_c(16) TYPE p DECIMALS 2,
l_pow_gen TYPE p DECIMALS 2,
l_pow_gen_d TYPE p DECIMALS 2,
l_pow_gen_c TYPE p DECIMALS 2,
l_no_of_days TYPE p,
disp_bptarget TYPE zmisdisp5,
disp_act_d TYPE zmisdisp5,
disp_act_c TYPE zmisdisp5,
disp_d_kwh TYPE zmisdisp5,
disp_c_kwh TYPE zmisdisp5,
disp_d_mw TYPE zmisdisp5,
disp_c_mw TYPE zmisdisp5,
disp_pow_gen_d TYPE zmisdisp5,
disp_pow_gen_c TYPE zmisdisp5,
disp_pow_gen TYPE zmisdisp5,
disp_ftd_h1 TYPE zmisdisp5,
disp_ftd_h2 TYPE zmisdisp5,
disp_ftd_h3 TYPE zmisdisp5,
disp_ftd_h4 TYPE zmisdisp5,
disp_ftd_h5 TYPE zmisdisp5,
disp_ftd_o1 TYPE zmisdisp5,
disp_ftd_o2 TYPE zmisdisp5,
disp_ftd_o4 TYPE zmisdisp5,
disp_ftd_o5 TYPE zmisdisp5,
disp_***_o1 TYPE zmisdisp5,
disp_***_o2 TYPE zmisdisp5,
disp_***_o4 TYPE zmisdisp5,
disp_***_o5 TYPE zmisdisp5,
disp_cath_d TYPE zmisdisp5,
disp_cath_c TYPE zmisdisp5,
disp_anode_d TYPE zmisdisp5,
disp_anode_c TYPE zmisdisp5,
l_rec_con_d_kwh(16) TYPE p DECIMALS 2,
l_rec_con_c_kwh(16) TYPE p DECIMALS 2,
l_rec_con_d_mw(16) TYPE p DECIMALS 2,
l_rec_con_c_mw(16) TYPE p DECIMALS 2,
tot_kah TYPE p DECIMALS 2,
avg_kah TYPE p DECIMALS 2,
disp_tot_kah TYPE zmisdisp5,
disp_avg_kah TYPE zmisdisp5,
v_ftd_h1 TYPE p DECIMALS 2,
v_ftd_h2 TYPE p DECIMALS 2,
v_ftd_h3 TYPE p DECIMALS 2,
v_ftd_h4 TYPE p DECIMALS 2,
v_ftd_h5 TYPE p DECIMALS 2,
v_ftd_o1 TYPE p DECIMALS 2,
v_ftd_o2 TYPE p DECIMALS 2,
v_ftd_o4 TYPE p DECIMALS 2,
v_ftd_o5 TYPE p DECIMALS 2,
v_***_o1 TYPE p DECIMALS 2,
v_***_o2 TYPE p DECIMALS 2,
v_***_o4 TYPE p DECIMALS 2,
v_***_o5 TYPE p DECIMALS 2,
l_cdiff1 LIKE imrg-cdiff,
l_cdiff2 LIKE imrg-cdiff,
l_cdiff3 LIKE imrg-cdiff,
l_cdiff4 LIKE imrg-cdiff,
l_path LIKE rlgrap-filename,
l_flag.
DATA :prod_disp TYPE TABLE OF zmisdisp1 WITH HEADER LINE,
keyp_disp TYPE TABLE OF zmisdisp2 WITH HEADER LINE,
keyp_dis1 TYPE TABLE OF zmisdisp2 WITH HEADER LINE,
rmat_disp TYPE TABLE OF zmisdisp4 WITH HEADER LINE,
rcur_disp TYPE TABLE OF zmisdisp6 WITH HEADER LINE,
rhrs_disp TYPE TABLE OF zmisdisp4 WITH HEADER LINE,
brkd_disp TYPE TABLE OF zmisdisp7 WITH HEADER LINE.
DEFINE fill_kpp.
clear l_flag.
loop at it_mic_data where kurztext = &1.
l_mean1 = it_mic_data-mittelwert.
l_mean = it_mic_data-mean.
if l_flag = ' '.
move : &2 to keyp_disp-desc,
l_mean1 to keyp_disp-ftd.
if it_mic_data-kurztext = 'Ingot Pb SHG Zinc'.
l_mean2 = v_mean_pbshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Cu SHG Zinc'.
l_mean2 = v_mean_cushg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Cd SHG Zinc'.
l_mean2 = v_mean_cdshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Fe SHG Zinc'.
l_mean2 = v_mean_feshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
l_mean2 = v_mean_znshg.
move l_mean2 to keyp_disp-avg.
else.
move l_mean to keyp_disp-avg.
endif.
if it_mic_data-masseinhsw = 'GLI'.
move 'g/l' to keyp_disp-unit.
elseif it_mic_data-masseinhsw = 'PPM'.
move 'ppm' to keyp_disp-unit.
elseif it_mic_data-masseinhsw = 'NO'.
move 'no' to keyp_disp-unit.
else.
move it_mic_data-masseinhsw to keyp_disp-unit.
endif.
append keyp_disp.
clear keyp_disp.
move 'X' to l_flag.
else.
move : l_mean1 to keyp_disp-ftd.
append keyp_disp.
clear keyp_disp.
endif.
endloop.
if sy-subrc is not initial.
move &2 to keyp_disp-desc.
append keyp_disp.
clear keyp_disp.
endif.
END-OF-DEFINITION.
DEFINE fill_kp1.
clear l_flag.
loop at it_mic_data where kurztext = &1.
l_mean1 = it_mic_data-mittelwert.
l_mean = it_mic_data-mean.
if l_flag = ' '.
move : &2 to keyp_dis1-desc,
l_mean1 to keyp_dis1-ftd.
if it_mic_data-kurztext = 'Ingot Pb SHG Zinc'.
l_mean2 = v_mean_pbshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Cu SHG Zinc'.
l_mean2 = v_mean_cushg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Cd SHG Zinc'.
l_mean2 = v_mean_cdshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Fe SHG Zinc'.
l_mean2 = v_mean_feshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
l_mean3 = v_mean_znshg.
move l_mean3 to keyp_dis1-avg.
clear l_mean3.
l_mean3 = it_mic_data-mittelwert.
move l_mean3 to keyp_dis1-ftd.
else.
move l_mean to keyp_dis1-avg.
endif.
if it_mic_data-masseinhsw = 'GLI'.
move 'g/l' to keyp_dis1-unit.
elseif it_mic_data-masseinhsw = 'PPM'.
move 'ppm' to keyp_dis1-unit.
elseif it_mic_data-masseinhsw = 'NO'.
move 'no' to keyp_dis1-unit.
else.
move it_mic_data-masseinhsw to keyp_dis1-unit.
endif.
append keyp_dis1.
clear keyp_dis1.
move 'X' to l_flag.
else.
if it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
clear l_mean3.
l_mean3 = it_mic_data-mittelwert.
move l_mean3 to keyp_dis1-ftd.
else.
move : l_mean1 to keyp_dis1-ftd.
endif.
append keyp_dis1.
clear keyp_dis1.
endif.
endloop.
if sy-subrc is not initial.
move &2 to keyp_dis1-desc.
append keyp_dis1.
clear keyp_dis1.
endif.
END-OF-DEFINITION.
*FIRST PAGE
********PLANT HEADER
MOVE 'CLZS HYDRO I PLANT - DAILY PRODUCTION REPORT' TO v_header.
********Production figure
LOOP AT it_disp1.
prod_disp-desc = it_disp1-desc.
prod_disp-d_plnmg = it_disp1-d_plnmg.
prod_disp-d_menge = it_disp1-d_menge.
prod_disp-u_plnmg = it_disp1-u_plnmg.
prod_disp-u_menge = it_disp1-u_menge.
prod_disp-avg = it_disp1-avg.
prod_disp-ask_rate = it_disp1-ask_rate.
prod_disp-m_plnmg = it_disp1-m_plnmg.
prod_disp-y_plnmg = it_disp1-y_plnmg.
prod_disp-y_menge = it_disp1-y_menge.
prod_disp-y_variance = it_disp1-y_variance.
APPEND prod_disp.
ENDLOOP.
********Key performance parameters
MOVE 'ROASTER :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp '% S/S IN 45 DEG' ' S/S in Calcine'.
MOVE 'LEACHING :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp '% S/S IN CAL' ' S/S in Calcine'.
fill_kpp '%water soluble Zn' ' W/S Zn in Jarosite Cake'.
fill_kpp '%total Zn in HBF' ' T/Zn in Jarosite cake'.
fill_kpp 'ZINC IN CT' ' Zn in Conditioning tank'.
fill_kpp 'g/l zn in neutral overflow' ' Zn in Electrolyte Prod (gpl)'.
fill_kpp 'PPM CU IN PS25' ' Purified Solution Cu'.
fill_kpp 'PPM CADMIUM IN PS25' ' Purified Solution Cd'.
fill_kpp 'PPM COBALT IN PS25' ' Purified Solution Co'.
MOVE 'CELLHOUSE :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp 'g/l zinc in cell feed' ' Cell Feed Zinc gpl'.
fill_kpp 'GPL ACID IN CELL FEED' ' Cell Feed acidity gpl'.
fill_kpp 'g/l manganese in cell feed' ' Cell Feed Mn gpl'.
LOOP AT t_imrg_add_disp.
MOVE: t_imrg_add_disp-desc TO keyp_disp-desc,
t_imrg_add_disp-d_value TO keyp_disp-ftd,
t_imrg_add_disp-c_value TO temp,
temp TO keyp_disp-avg.
IF t_imrg_add_disp-units = 'NO'.
MOVE: 'no' TO keyp_disp-unit.
ELSE.
MOVE: t_imrg_add_disp-units TO keyp_disp-unit.
ENDIF.
APPEND keyp_disp.CLEAR keyp_disp.
ENDLOOP.
fill_kp1 'Ingot Pb SHG Zinc' ' Ingot Pb SHG Zinc'.
fill_kp1 'Ingot Cu SHG Zinc' ' Ingot Cu SHG Zinc'.
fill_kp1 'Ingot Cd SHG Zinc' ' Ingot Cd SHG Zinc'.
fill_kp1 'Ingot Fe SHG Zinc' ' Ingot Fe SHG Zinc'.
fill_kp1 'Ingot Zn SHG Zinc' ' Ingot Zn SHG Zinc'.
********Cellhouse power
CATCH SYSTEM-EXCEPTIONS bcd_zerodivide = 1.
v_m_kwh_mt = v_ind8_m / cathode_recipt.
v_m_mt_mw = cathode_recipt / ( v_ind8_m / 24000 ).
ENDCATCH.
MOVE : v_d_kwh_mt TO disp_d_kwh_mt,
v_m_kwh_mt TO disp_m_kwh_mt,
v_d_mt_mw TO disp_d_mt_mw,
v_m_mt_mw TO disp_m_mt_mw.
*SECOND PAGE
********Raw Material
LOOP AT it_disp3.
rmat_disp-desc = it_disp3-desc.
rmat_disp-opstk = it_disp3-opstk.
rmat_disp-d_recpt = it_disp3-d_recpt.
rmat_disp-u_recpt = it_disp3-u_recpt.
rmat_disp-d_cons = it_disp3-d_cons.
rmat_disp-u_cons = it_disp3-u_cons.
rmat_disp-clstk = it_disp3-clstk.
APPEND rmat_disp.
ENDLOOP.
********Work in Progress
********Finished Goods
********power consumption
l_no_of_days = v_mm_en_dt+6(2).
CATCH SYSTEM-EXCEPTIONS bcd_zerodivide = 1.
l_bptarget = ( v_bp_nrms_p * v_gross_d ) / l_no_of_days.
l_act_d = v_ind6_d + v_ind2_d - ( v_ind3_d + ( v_ind4_d / 2 ) ) - v_ind5_d.
l_act_c = v_ind6_m + v_ind2_m - ( v_ind3_m + ( v_ind4_m / 2 ) ) - v_ind5_m.
l_pow_gen = ( v_ind2_d / 1000 ) / v_ind7_d.
ENDCATCH.
l_pow_gen_d = v_ind2_d / 1000.
l_pow_gen_c = v_ind9_m / 1000.
l_rec_con_d_kwh = v_ind8_d.
l_rec_con_c_kwh = v_ind8_m.
l_rec_con_d_mw = v_ind8_d / 24000.
l_rec_con_c_mw = v_ind8_m / ( 24000 * v_days_pased ).
LOOP AT t_disp_curr.
rcur_disp-time = t_disp_curr-time.
rcur_disp-current = t_disp_curr-current.
rcur_disp-kah = t_disp_curr-kah.
APPEND rcur_disp.
AT LAST.
SUM.
tot_kah = t_disp_curr-kah.
ENDAT.
ENDLOOP.
avg_kah = tot_kah / '24'.
*********************running hrs
LOOP AT it_disp6.
rhrs_disp-desc = it_disp6-desc.
rhrs_disp-opstk = it_disp6-d_runhrs.
rhrs_disp-d_recpt = it_disp6-m_runhrs.
APPEND rhrs_disp.
ENDLOOP.
rhrs_disp-desc = 'Turbo Generator'.
rhrs_disp-opstk = v_turbod.
rhrs_disp-d_recpt = v_turboc.
INSERT rhrs_disp INDEX 2.
**********************BREAK_DOWN & OIL
CLEAR value.
LOOP AT itab2.
IF itab2-equnr = 'NMZ-EH01G001'.
PERFORM s_conversion_h.
v_ftd_h1 = v_ftd_h1 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01G002'.
PERFORM s_conversion_h.
v_ftd_h2 = v_ftd_h2 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V003'.
PERFORM s_conversion_h.
v_ftd_h3 = v_ftd_h3 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V001'.
PERFORM s_conversion_h.
v_ftd_h4 = v_ftd_h4 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V002'.
PERFORM s_conversion_h.
v_ftd_h5 = v_ftd_h5 + value.
CLEAR value.
ENDIF.
ENDLOOP.
LOOP AT t_oil.
AT END OF ind.
SUM.
IF t_oil-ind = 1.
v_***_o1 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 2.
v_***_o2 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 3.
v_***_o4 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 4.
v_***_o5 = t_oil-cdiff * 1000.
ENDIF.
ENDAT.
IF t_oil-idate = p_repdt.
IF t_oil-ind = 1.
l_cdiff1 = l_cdiff1 + t_oil-cdiff.
ELSEIF t_oil-ind = 2.
l_cdiff2 = l_cdiff2 + t_oil-cdiff.
ELSEIF t_oil-ind = 3.
l_cdiff3 = l_cdiff3 + t_oil-cdiff.
ELSEIF t_oil-ind = 4.
l_cdiff4 = l_cdiff4 + t_oil-cdiff.
ENDIF.
ENDIF.
ENDLOOP.
v_ftd_o1 = l_cdiff1 * 1000.
v_ftd_o2 = l_cdiff2 * 1000.
v_ftd_o4 = l_cdiff3 * 1000.
v_ftd_o5 = l_cdiff4 * 1000.
*********Breakdown details----3rd page
LOOP AT itab INTO wa.
CALL FUNCTION 'FLTP_CHAR_CONVERSION'
EXPORTING
decim = 0
expon = 0
input = wa-auszt
ivalu = 'X'
IMPORTING
flstr = wk_char_auszt.
CONDENSE wk_char_auszt NO-GAPS.
wk_flt_auszt = wk_char_auszt.
wk_flt_auszt = wk_flt_auszt / 3600.
duration = wk_flt_auszt.
brkd_disp-eqdesc = wa-eqktx.
brkd_disp-nodesc = wa-qmtxt.
brkd_disp-hrs = duration.
APPEND brkd_disp.
ENDLOOP.
MOVE : v_ftd_h1 TO disp_ftd_h1,
v_ftd_h2 TO disp_ftd_h2,
v_ftd_h3 TO disp_ftd_h3,
v_ftd_h4 TO disp_ftd_h4,
v_ftd_h5 TO disp_ftd_h5,
v_ftd_o1 TO disp_ftd_o1,
v_ftd_o2 TO disp_ftd_o2,
v_ftd_o4 TO disp_ftd_o4,
v_ftd_o5 TO disp_ftd_o5,
v_***_o1 TO disp_***_o1,
v_***_o2 TO disp_***_o2,
v_***_o4 TO disp_***_o4,
v_***_o5 TO disp_***_o5,
l_bptarget TO disp_bptarget,
l_act_d TO disp_act_d,
l_act_c TO disp_act_c,
l_rec_con_d_kwh TO disp_d_kwh,
l_rec_con_c_kwh TO disp_c_kwh,
l_rec_con_d_mw TO disp_d_mw,
l_rec_con_c_mw TO disp_c_mw,
tot_kah TO disp_tot_kah,
avg_kah TO disp_avg_kah,
l_pow_gen TO disp_pow_gen,
l_pow_gen_d TO disp_pow_gen_d,
l_pow_gen_c TO disp_pow_gen_c,
v_cath_d TO disp_cath_d,
v_cath_c TO disp_cath_c,
v_anode_d TO disp_anode_d,
v_anode_c TO disp_anode_c.
wa_output_options-tdimmed = 'X'.
wa_control_parameters-device = 'PRINTER'.
wa_control_parameters-preview = 'X'.
IF rb3 = 'X'.
wa_control_parameters-getotf = 'X'.
wa_control_parameters-no_dialog = 'X'.
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZHZLPP_CLZSN_DAILY_MIS'
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = wa_control_parameters
output_options = wa_output_options
user_settings = 'X'
header = v_header
date = p_repdt
l_bptarget = disp_bptarget
l_act_d = disp_act_d
l_act_c = disp_act_c
disp_d_kwh = disp_d_kwh
disp_c_kwh = disp_c_kwh
disp_d_mw = disp_d_mw
disp_c_mw = disp_c_mw
disp_tot_kah = disp_tot_kah
disp_avg_kah = disp_avg_kah
disp_d_kwh_mt = disp_d_kwh_mt
disp_m_kwh_mt = disp_m_kwh_mt
disp_d_mt_mw = disp_d_mt_mw
disp_m_mt_mw = disp_m_mt_mw
disp_pow_gen = disp_pow_gen
disp_pow_gen_d = disp_pow_gen_d
disp_pow_gen_c = disp_pow_gen_c
disp_ftd_h1 = disp_ftd_h1
disp_ftd_h2 = disp_ftd_h2
disp_ftd_h3 = disp_ftd_h3
disp_ftd_h4 = disp_ftd_h4
disp_ftd_h5 = disp_ftd_h5
disp_ftd_o1 = disp_ftd_o1
disp_ftd_o2 = disp_ftd_o2
disp_ftd_o4 = disp_ftd_o4
disp_ftd_o5 = disp_ftd_o5
disp_***_o1 = disp_***_o1
disp_***_o2 = disp_***_o2
disp_***_o4 = disp_***_o4
disp_***_o5 = disp_***_o5
disp_cath_d = disp_cath_d
disp_cath_c = disp_cath_c
disp_anode_d = disp_anode_d
disp_anode_c = disp_anode_c
IMPORTING
job_output_info = w_return " .
TABLES
prod_tab = prod_disp
keyp_tab = keyp_disp
remk_tab = it_remarks
rmat_tab = rmat_disp
rwip_tab = it_disp4
rfng_tab = it_disp_fg
rcur_tab = rcur_disp
rhrs_tab = rhrs_disp
brkd_tab = brkd_disp
keyp_tab1 = keyp_dis1
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE 'Error in printing form' TYPE 'I'.
ENDIF.
********Downloading in pdf format.
IF rb3 = 'X'.
IF l_usract <> 9.
MOVE fullpath TO l_path.
i_otf[] = w_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF' "
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
bin_filesize = v_len_in
filename = l_path
filetype = 'BIN'
IMPORTING
filelength = w_filesize
TABLES
data_tab = i_tline
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc = 0.
MESSAGE 'File downloaded successfully' TYPE 'S'.
ENDIF.
ENDIF.
ENDIF.
IF sy-batch = 'X'. " SENDING MAILS IF SCHEDULED IN BACKGROUND
DATA: formname TYPE tdsfname,
fm_name TYPE rs38l_fnam,
control_parameters TYPE ssfctrlop,
output_options TYPE ssfcompop,
job_output_info TYPE ssfcrescl,
otf_data TYPE tsfotf.
DATA: otf TYPE TABLE OF itcoo WITH HEADER LINE,
doctab_archive TYPE TABLE OF docs WITH HEADER LINE,
lines TYPE TABLE OF tline WITH HEADER LINE,
bin_filesize TYPE i.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZHZLPP_CLZSN_DAILY_MIS'
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
control_parameters-no_dialog = 'X'.
control_parameters-getotf = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = control_parameters
header = v_header
date = p_repdt
l_bptarget = disp_bptarget
l_act_d = disp_act_d
l_act_c = disp_act_c
disp_d_kwh = disp_d_kwh
disp_c_kwh = disp_c_kwh
disp_d_mw = disp_d_mw
disp_c_mw = disp_c_mw
disp_tot_kah = disp_tot_kah
disp_avg_kah = disp_avg_kah
disp_d_kwh_mt = disp_d_kwh_mt
disp_m_kwh_mt = disp_m_kwh_mt
disp_d_mt_mw = disp_d_mt_mw
disp_m_mt_mw = disp_m_mt_mw
disp_pow_gen = disp_pow_gen
disp_pow_gen_d = disp_pow_gen_d
disp_pow_gen_c = disp_pow_gen_c
disp_ftd_h1 = disp_ftd_h1
disp_ftd_h2 = disp_ftd_h2
disp_ftd_h3 = disp_ftd_h3
disp_ftd_h4 = disp_ftd_h4
disp_ftd_h5 = disp_ftd_h5
disp_ftd_o1 = disp_ftd_o1
disp_ftd_o2 = disp_ftd_o2
disp_ftd_o4 = disp_ftd_o4
disp_ftd_o5 = disp_ftd_o5
disp_***_o1 = disp_***_o1
disp_***_o2 = disp_***_o2
disp_***_o4 = disp_***_o4
disp_***_o5 = disp_***_o5
disp_cath_d = disp_cath_d
disp_cath_c = disp_cath_c
disp_anode_d = disp_anode_d
disp_anode_c = disp_anode_c
IMPORTING
job_output_info = job_output_info
TABLES
prod_tab = prod_disp
keyp_tab = keyp_disp
remk_tab = it_remarks
rmat_tab = rmat_disp
rwip_tab = it_disp4
rfng_tab = it_disp_fg
rcur_tab = rcur_disp
rhrs_tab = rhrs_disp
brkd_tab = brkd_disp
keyp_tab1 = keyp_dis1
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc = 0.
otf_data = job_output_info-otfdata[].
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = otf_data[]
doctab_archive = doctab_archive[]
lines = lines[]
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc = 0.
SUBMIT rsconn01 with mode = 'INT' AND RETURN.
* ----<<distrubution list>>----
PERFORM mail_users TABLES lines USING 'MIS-HY1A' v_header. " Donot put more than 8 email-ids
PERFORM mail_users TABLES lines USING 'MIS-HY1B' v_header. " in a distribution list
PERFORM mail_users TABLES lines USING 'MIS-HY1C' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1D' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1E' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1F' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1G' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1H' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1I' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1J' v_header.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " print
*& Form get_download_path
* text
* --> p1 text
* <-- p2 text
FORM get_download_path .
CALL FUNCTION 'GUI_FILE_SAVE_DIALOG'
EXPORTING
window_title = 'Download as pdf file'
default_extension = 'pdf'
IMPORTING
fullpath = fullpath
user_action = l_usract.
IF l_usract = '9'.
STOP.
ENDIF.
ENDFORM. " get_download_path
*& Form mail_users
* text
* -->P_LINES text
* -->P_2153 text
* -->P_V_HEADER text
FORM mail_users TABLES p_lines STRUCTURE tline
USING p_dist_list
p_v_header.
CONSTANTS: c_raw TYPE so_obj_tp VALUE 'RAW',
c_pdf TYPE so_obj_tp VALUE 'PDF',
c_255 TYPE i VALUE 255,
c_134 TYPE i VALUE 134,
c_x TYPE c VALUE 'X'.
DATA: document_data LIKE sodocchgi1 ,
tab_lines TYPE i,
contents_txt TYPE TABLE OF solisti1 WITH HEADER LINE,
contents_bin TYPE TABLE OF solisti1 WITH HEADER LINE,
packing_list TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
object_header TYPE TABLE OF solisti1 WITH HEADER LINE,
receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
l_str(255) ,
v1 TYPE i,
v2 TYPE i,
v3 TYPE i.
document_data-obj_name = 'EMAIL'.
document_data-obj_descr = p_v_header. " SUBJECT LINE
CONCATENATE 'Please find the attached SAP generated Daily Production Report for the day'
p_repdt+6(2)
p_repdt+4(2)
'.' p_repdt+0(4)
INTO contents_txt.
APPEND contents_txt.
CLEAR contents_txt.
APPEND contents_txt.
APPEND contents_txt.
DESCRIBE TABLE contents_txt LINES tab_lines.
READ TABLE contents_txt INDEX tab_lines.
document_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( contents_txt ).
document_data-doc_size = tab_lines .
CLEAR packing_list-transf_bin.
packing_list-head_start = 1.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = tab_lines.
packing_list-doc_type = c_raw.
packing_list-doc_size = document_data-doc_size.
APPEND packing_list.
LOOP AT p_lines.
CLEAR l_str.
l_str+0(2) = p_lines-tdformat.
l_str+2(132) = p_lines-tdline.
v2 = v1 + c_134.
IF v2 LE c_255.
contents_bin-line+v1(c_134) = l_str. v1 = v2.
ELSE.
v3 = v2 - c_255.
v2 = c_255 - v1.
IF NOT v2 IS INITIAL.
contents_bin-line+v1(v2) = l_str+0(v2).
ENDIF.
APPEND contents_bin.
CLEAR contents_bin.
v1 = v3.
v3 = 134 - v1.
IF NOT v1 IS INITIAL.
contents_bin-line+0(v1) = l_str+v3(v1).
ENDIF.
ENDIF.
ENDLOOP.
APPEND contents_bin.
CLEAR contents_bin.
DESCRIBE TABLE contents_bin LINES tab_lines.
READ TABLE contents_bin INDEX tab_lines.
CONCATENATE 'Hy-I Report'
p_repdt+6(2)
p_repdt+4(2)
'.' p_repdt+0(4)
'.pdf'
INTO object_header.
APPEND object_header.
packing_list-transf_bin = c_x.
packing_list-head_start = 1.
packing_list-head_num = 1.
packing_list-body_start = 1.
packing_list-body_num = tab_lines.
packing_list-doc_type = c_pdf.
packing_list-obj_name = 'text1'.
packing_list-obj_descr = 'Production report'.
packing_list-doc_size = tab_lines * 255 + STRLEN( contents_bin ).
APPEND packing_list.
receivers-receiver = p_dist_list.
receivers-rec_type = 'C'.
APPEND receivers.
CLEAR receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
put_in_outbox = ' '
SENDER_ADDRESS = 'CZPPPLG'
SENDER_ADDRESS_TYPE = 'B'
commit_work = 'X'
TABLES
packing_list = packing_list
object_header = object_header
contents_bin = contents_bin
contents_txt = contents_txt
receivers = receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 with mode = 'INT' AND RETURN.
ENDIF.
ENDFORM. " mail_users -
How to pass values to be displayed on the report?
I have an ASP.Net page that has values from the user that needs to be displayed in the page header of the report. Those values need to be passed to the report.
I am using Crystal Reports 2011. The code behind for ASP.Net page is written in VB.Net.
I had thought of using Parameter fields in the report and using the SetParameterValue method of ReportDocument but I am not familiar with using Parameter fields.
How to set up the report to do this?
Sincerely,
Keith JacksonHi Keith
DJ has some very good suggestions, but the first thing we want to do is to make sure the report works in the designer as you want it to. Reading this thread, I'm a bit unsure if the report does actually work in the designer - can you please comment on that?
If it does, I like to go from simple as far as coding is concerned. In this case, that would mean not worrying about the parameters or logon and let the report engine do the heavy lifting for us:
Create a new project. Throw a CR viewer on a form and add one line of code in page load:
CrystalReportViewer1.ReportSource = <path to the report>
The engine will prompt for the db logon as well as the parameters. Fill those out. The report should then display on the screen.
From here we can get fancy and add DB logon code as well as the parameter code.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Udf Data is not being displayed in the report
Hi all,
i have designed one report in which i am displaying some udf fields along with other system fields.
i have not used any selection criteria.
when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
If i open sales order and press 'Shift-F2' and update the document and now if i run report then i get that udf value in the report.
why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
pls suggest some solution.
regsrds,
Chetan.Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao. -
How to display % in the report results
Hi Experts
I my BW report i am calculacting % using Calculacted KF.
I want to display "%" in the report
Ex: 2.5 should be displayed as 2.5%
How can i achieve thisHi,
In formula -- u have to select the Percentage Functions - then u select the [%A] Percentage share funtion.
It will display the calculated value with percentage like ,50%.
Regards
RP -
Please solve Radio buttons (when selected) will then display on the report
Each of these new Radio buttons (when selected) will then display on the report in the same locations, which is after the existing columns.
Check boxes are by default checked.
When the 1st radio button is selected then a new column will be displayed in the ALV output
Next to A.
Like wise when 2nd radio button selected then a new column will be displayed in the ALV output next to B.
Like wise the ALV output is displayed.
A is a checkbox
B is a checkbox
C is a checkbox
D is a checkbox
1 is a radio button
2 is a radio button
3 is a radio button
4 is a radio buttonwhile populating fieldcatalog itself u include these condition....
if Pradiobutton = 'X'.
*--populate field catalog for field u want in specified position....
endif.
similarly u proceed for other fields and other condition -
SSRS tablix not be visible when no data is selected to display on the report
In an SSRS 2008 r2 existing dashboard application, I display a tablix (as a header) based upon the following selection criteria:
=iif(Len(First(Fields!CustomerNumber.Value, "Main")) = 0, true, false).
The CustomerNumber value is passed between the various SSRS reports in the dashboard application. There are times when the Fields!CustomerNumber.Value is selected for a particular report and there is no detail data to display. What happens with the existing
reports, is the space that would be allocated for the tablix is shown.
When there is no data to display, there is a NoRowsmessage that can be displayed on the report.
Basically when there are no detail records to display on the report, I would like the tablix report header not to display when there is no detail data for the report.
Thus can you tell me how to code the tablix report header not to display when there is no detail data?Sorry, I overlooked Katherine's simple solution, partly because the header doesn't go away, it is just replaced with something that cannot be differentiated from the report background. Keep in mind that the space the tablix is in is still occupied by the
tablix as you can see below:
Sample report with no data and an empty rows message of " ".
Above is the same report without a no rows message but with the header row hidden using thisformula: =IIf(Count(1)>0, false, true). You can see that the space that the header normally occupies is collapsed away when hiding the header whereas the spaces
(" ") occupy that space when using the no rows message.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek. -
I have my 3 bt email addresses linked to Thunderbird. This morning when checking emails I found that 1 of the accounts is missing everything apart from the last 2 days worth of emails. I've logged into BT and all the emails are there but not in Thunderbird, how can I get them back?
Delete your e-mail if you are dealing with Yahoo or Google or Apple, and then add the account back in again. This will reload those e-mails. If you have the same problem, then, you may have a problem in your Mail app, and you may have to reset you iPad to factory default in iTunes to reload a fresh and clean copy of the e-mail app. Always be sure you do your backups before fiddling around with your iPad, like this.
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414 -
Wrong u2018Last Data Updateu2019 is displayed in the reports
Hi
We have a problem with the u2018Last Data Updateu2019 date that is displayed in some of our reports that are linked to a specific Multiprovider. The date is stuck on 2009-06-29 even thou the data is updated every day. The Multiprovider is linked to 9 different infocubes of which 5 are updated on a daily basis. The other 4 are updated once a month or so. The date was displayed correctly in the reports up until 2009-06-29. What happened that day was that we transported a re-activation of the cubes and for some reason that caused a problem for the u2018Last Data Updateu2019 date. Some threads suggest that it is the date from the request that were loaded the longest time ago that is displayed but this is obviously not the case here. There is a Link: [Similar thread|Query element - "Last Data Update:" for MultiProviders; that mentions Link: [SAP Note 993622|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler] .
Anyone who has an idea of what I should do? / MatsHi
Nice to see that someone is working on a sturday night About your reply, that just cant be the case here or mabye we have made som abjustments to the standard i-View that affects the origin of the 'Last data update' date. The Multiprovider containes an Infocube that was last updated 2007-11-16 so according to your theory that should be the date that is displayed, but it is not. I'm quite conviced that it has someting to do with the transport that went in to production that day, but what I did was that I unchecked the 'Compress aggregates after rollup' checkbox on some of the cubes. But mabye we had some unwanted changes in our developmentsystem that affected the cubes in some way and that accidently came along with the transport or something like that. Any other suggestions? / Mats -
CLASS LCL_HANDLE_EVENTS DEFINITION.
PUBLIC SECTION.
METHODS:ON_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_SALV_EVENTS_TABLE
IMPORTING ROW COLUMN.
ENDCLASS. "lcl_handle_events DEFINITION
DATA: EVENT_HANDLER TYPE REF TO LCL_HANDLE_EVENTS.
* CLASS lcl_handle_events IMPLEMENTATION
CLASS LCL_HANDLE_EVENTS IMPLEMENTATION.
METHOD ON_DOUBLE_CLICK.
CASE COLUMN.
WHEN C_VBELN.
READ TABLE T_FINAL INTO WA_FINAL INDEX ROW.
IF SY-SUBRC = 0.
SET PARAMETER ID: C_AUN FIELD WA_FINAL-VBELN.
CALL TRANSACTION C_VA03 AND SKIP FIRST SCREEN. "#EC CI_CALLTA
ENDIF.
ENDCASE.
ENDMETHOD. "on_double_click
ENDCLASS. "lcl_handle_events IMPLEMENTATION
Is Something Wrong With The Code?If you are using ABAP for the report this will fulfill your requirement.
Take a close look at the ZUSEREXIT program.
When you execute it you enter the t-code e.g. VA01.
It will display the enhancements available in VA01.
Now you can click on the user exit name and you will
automatically be transferred to SMOD t-code with the
selected enhancement as a parameter.
You can see in the below code how simple it is to implement this.
You will not call SMOD but VA03 t-code on click.
You can use this code to execute it in SE38 and see how it works.
CODE STARTS BELOW:
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transakcija - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Naziv exita',
21 sy-vline ,
22 'Opis exita',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'Broj exita:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'Nema user exita za ovu transakciju'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transakcija ne postoji'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Maybe you are looking for
-
Finding the ASIO driver for Sound Blaster ZS
Finding the ASIO driver for Sound Blaster ZS And One More question Anybody are using the Guitar Rig (Guitar effect software) How to detect the Sound Blaster ZS sound card with WDM Driver
-
Pdf toolbar in i.e. explorer not functioning
Installed acrobat 8 with the latest update on a vista 64-bit PC running internet explorer 7. The pdf toolbar pull down menu on the browser provide a listing of all the submenus ( convert to pdf ..etc) however, when I select any of the submenus nothin
-
SBO Ent XI 3.1 SP3 repository database access error
Dear Experts, We are installing XI SP3 and using oracle 10g for repository database, we've installed 10.2.0.4 oracle db on windows 2008, tnsping is working, but we are getting following error ; Database access error. Reason Loading shared object fail
-
Spinning beach ball of death. I'm desperate.
Hi, one months ago I had a quite clean installation of Snow Leopard but I kept getting the spinning wheel. I reinstalled the OS and it was better. Now, 4 weeks after, I have again the same situation. Very random spinning wheel. I can't even log off o
-
Has anyone else been wondering...
Ok, so now that I've got 4 CPUs sitting upstairs in my quad, when do the other three get to actually do something? Logic Pro uses them (in a somewhat klugy way) but shouldn't they be supported (or enlisted) by the OS? Anybody know if Leopard addresse