Last 5 seconds of additional content logic pro x..now its frozen after 10 hours ! anybody have any advice?
I have a brand new iMac, i have logic pro x and have been downloading the additional content needed to work through the david nahmani book.
i have let it download overnight but it is now stuck with only 5 seconds remaining. it has been like this for the last 3 hours. internet connection iOS working ok.
can anybody give mw some advice on what i need to do?
thanks
Hi there turkster,
I would recommend taking a look at the troubleshooting steps found in the article below.
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT200260
-Griff W.
Similar Messages
-
Is getting Logic Pro 9 now worth spending $200?
At this point, I think Logic Pro 9 is almost 4 years old or something. Any idea if they will be coming out with a new one soon? I want a step up from GarageBand as I have been getting more serious about recording my music, but I don't want to waste $200 if they release a new version soon. Is they any sort of upgrade fee that if you bought q previous version you get a discounted price of the next installment or something like that, or if I buy this one, and say in a week the new one comes out, I'll have to pay another $200, or whatever price the new one is.
Thanks so much!There is now only one version of Logic... called Logic Pro... (Currently v9.1.8) which can only be purchased and downloaded from the Mac App Store. The Additional content mentioned below is downloaded from inside of Logic pro itself for free.
The previous versions were;
Logic Studio (The Boxed Set) of which there were two version 1.0 and later on 2.0 including Logic Pro 8 and Logic Pro 9 respectively
Along with that came DVDs containing the additional content (Instruments, Apple Loops known as Jam Packs, and other items... on a physical medium along with several other smaller programs such as Soundtrack Pro and Waveburner.. neither of which are available or supported by Apple now.
Logic Studio came as a Boxed edition bought online and them mailed to you, from Apple or via 'Bricks and Mortar' Stores
Logic Studio was discontinued when Logic Pro was made available on the Mac App Store. You might be able to locate one on Ebay for example... though frankly, for most people.. its better to stick with the latest download only version in reality.
Logic Express was a cut down version of Logic Pro and again, was only available on physical DVDs and is no lomger sold.
There were also older versions of Logic itself sold on a physical medium prior to Logic Studio being released.
That's it! -
dvd stoped being recognized by my cumputer macbook pro the last ones made before unibody came out anybody have any suggestions as to what might be wrong?
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.
iMac, OS X Mountain Lion (10.8.4), trying to get Logic Pro XHello jst84,
The following article may be helpful in getting your purchase to complete.
Mac App Store: "An unknown error occurred (100)" when purchasing
http://support.apple.com/kb/TS3637
Cheers,
Allen -
3rd time trying to download additional content for mainstage....takes 15-20 hours each time...then asks for my password/id for permission...starts installing and about 1/4 of the way..it dissapears and nothing is installed....confused and frustrated..:-(
aerol wrote:
Are you trying to install all the content options at the same time? If so, have you tried to install them one at a time?
Yep.... this worked fine for me
CCT -
Hello, good day, my question is, buy Logic Express, but then put logic pro 9 in the same price, I can not buy logic studio, and let me know if I buy now logic pro, I can buy separately after jams that bring logic studio. thanks
José, if you buy and download Logic Pro in App Store now, the best option would be to buy an upgrade to Logic Studio. I don't think Jam Packs are available any more in Apple Store, besides it will be more expensive buying them one by one than upgrading to Studio.
Español: José, si compras y bajas Logic Pro de App Store ahora, despues la mejor opción será comprar el upgrade a Logic Studio. No creo que estos dias fuera posible comprar Jam Packs de Apple Store, y además comprarlos uno por uno seria más caro que el upgrade a Studio. -
I bought logic pro 9 and its asking for serial...what to do?
I bought logic pro 9 and its asking for serial...what to do?
northflower wrote:
why does it matter if someone else got it? if i bought it am i not allowed to use it becausesomeone else bought it before me?
I'm just saying that there is/was another copy of Logic on that computer at one time, the app store version does not require a serial however... if a previous version was on the machine I think even the app store version will ask for a serial... is that what's happening? -
I am trying to install final cut pro 6 onto my mac but a message keeps coming up saying its doesnt support a powerpc, anyone have any tips please?
If you have an Intel Mac and have recently upgraded to Lion or Mountain Lion; here is a post I made in another similar thread:
I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between Final Cut Pro or Lion/Mt. Lion;
3. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the screen from your other Mac to view and work FCP in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCP (such as FCP X) and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
I just bought my mac book pro and updated to mountain lion and I don't know why it is taking around 1minutes and 10sec to boot up,does anybody have any idea? and also how can I make my laptop boot up faster?thank you in advance
Call Apple Care.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened
https://forums.adobe.com/message/6219922#6219922
See if the issue in the thread above helps you to solve your problem. -
The battery for my macbook pro 13 says "service battery". Now I want to get a replacement but the reviews for it are horrible! Does anybody have any suggestions? I don't want to spend 130 dollars on something I'm going to have to replace in less than a year (which is what normally I been reading) I do design work and I take my mac everywhere. Having to always look for a plug or having to be constantly plugged in doesn't sound ideal to me. Please help me. what should I do???
Why does it matter if it a scam????? I'll let you figure that out by yourself. If I'm going to replace it, why should I be contempt with a battery that I have to replace within months (as stated by some people in the comments). The issue here is not if I should or not replace it OBVIOUSLY I'm going to have to before it starts going crazy. The underlying issue is why is the replacement battery for a lack of better words " a bit crap." It comes with a 3 month guarantee?? Is that a joke?!??!?! Some people complained it malfunction after only 8- 9 months? I'm sorry but as an Apple fan I think it's absolutely rubbish. I know there is no magic cure I'm just hoping someone shines the light on how crappy this replacement is.
-
I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw
There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton -
Have just down loaded iTUnes 10.5.2.(11) onto MacBook Pro and now the earphone port is not working. Any suggestions. Annie H
My System Preferences>Soundoutput screen does not have the "Use audio port for" field.
Does your MBP have two separate audio ports - one for line-in and one output port? Then you wan't see that selector.
but the port has started to work again....Reason???
Perhaps there was dirt or something in the jack and the contact was bad.
(or you accidentally put the plug into the line-in jack instead into the audio-out; that happened to me once ).
Regards
Léonie -
Anybody have any experience with JPad Pro ?
I have just now downloaded JPad Pro version 5.0 from the web site www.modelworks.com
Does anybody have any experience with JPad Pro? I would appreciate if people who have worked using JPad pro give me thier opinions about it.
Thanks.
VijayI have never used it...I find jEdit to be valuable to me...mainly for the syntax highlighting..
My first 2 yrs' coding was spent with "notepad" and or "vi" (text editors) and command line javac...
I am of two minds as to whether to recommend this approach for everyone...I feel closer to the code I write in a notepad...but often times I missed things like "boolian" instead of "boolean" ... things that syntax highlighting assist you with... and unclosed brackets...which when you use an editor like jEdit (or I imagine jPad pro) you can catch easier, due to the auto-indentation.. Searching for these bugs teaches you little other than to be careful while typing :-)
I still run "javac" from the command line ... I think jEdit has a way for me to call it from the GUI..but I've never used it.
If it feels right to you..it is not wrong...the only thing I will NEVER use is a code-writing abomination... some people (even advanced users, and I will not say that they are pansies) use them.. In anything but expert hands, they are catastrophically dangerous.
The risk for code-writing IDEs is that you didn't write it, and there is an extra (un-needeed) level of abstraction from the code, one more level of complexity, that is a blockade to truly understanding the code and improving/maintaining it.... -
I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?
On my laptop when I open up a pdf file and do a search for a particular
text phrase it prompts me to run a character analysis. Whereas on my mac
mini, when I try to engage the same process it just says it couldn't find
the phrase and doesn't even try and run a character analysis. I tried
clicking on the tool bar and the recognize text tab but nothing there seems
to do anything.
In trying to figure out the issue on my own I noticed one thing. I run a
small law firm in St. Louis and I scan in all my files to which are
subsequently emailed to my outlook account where I will save them as pdf's
to their respective folders. On my laptop when I open up an email from my
scanner I see the image of a acrobat document next to the attachment
paperclip symbol. However, when I open up the same email on my mac mini I
notice instead of an acrobat file image it shows a Preview file image (the
program used to open up pdf's before I installed acrobat).
Hope this helps!
Sincerely,
Jonathan McAllister
Maybe you are looking for
-
Is ESS Business package available in WebDynpro ABAP
Hi Experts, I have already configured the WD JAVA based business package in our landscape. A colleague informed me that the Business package is available in WD ABAP as well.. Is this true?? Please advise(since WD ABAP would be much more suitable in o
-
Why do my line/section breaks disappear ?
Can anyone please help ? I have been writing a series of practical police law guides called Pocketpolis. There is a free demo available on the iBook store The problem I'm having is I write the guide using Pages. On my Pages version my line/section
-
Error in EEW Task CRM_BUPA_PCUITD
Hi There I am trying to create an EEW extension, add new attributes table. I complete the wizard as specified, although when I try to generate the EEW it gives me an error in the CRM_BUPA_PCUITD task. The error message number is DC1705 - Parameter TI
-
Maximum length of film to burn DVD on Toast
Hi Panel Thanks again for all your help - new question. My film is 1 hr and 20 minutes long - can I burn this at best quality in Toast - or must I keep to 60 minutes? I am in a rush as this film must be ready for Sunday - I can't experiment either as
-
None of my OS 9 drives will boot...
Hi All, Encountered a problem that only just started happening today...No HD that i install OS 9 onto will boot... Ive always installed OS 9 using a cd copy of the retail version of 9 (i.e a CD-R that i made of the OS 9 disk image, not an actual reta