Last Agent Contact

Hello,
I'm trying to run a report to show all devices that have failed to contact within the last 90 days.
I can see last scan and load date within criteria but this also reports workstations that have reported back. I just wont those that have not made contact. Is this possible?
I'm using ZCM 10.3
Thanks
Mathew

burns,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Nokia 3710 fold: List of "last Used contacts" does...

    I have a Nokia 3710.
    When I send an SMS I want to pick a contact from the "last used contacts" (Senast använda in swedish).
    This list is not updated since some time.
    I have search through most menues and can not find a setting to change it (if there is one?).
    Any suggestions what to do?
    Thanks in advance

    Yes, I'm having the same issue and cannot find a resolution anywhere. In fact with mine, it's not so much that it's not updating, but moreso that it says that No Numbers or Email Addresses Found" - so I've got none showing at all.
    Don't want to do a Restore Factory Configuration in case I lose all of my information since buying the phone (only about 3 weeks old by the way)..... Hope there is an answer soon as it's most annoying.

  • Last update contacts not transferred to iphone during synchro

    last update contacts not transferred to iphone during synchro with itunes

    Try this method:
    - Find the "Images" Folder with Finder.
    - Right click on iPhoto Library and select "Show Package Content".
    - Delete "iPod Photo Cache" completely (don't worry, there is no necessary items inside).
    - Plug in your gadget and select the desired photos you want to copy from your library.
    - That's all. Now you must have your photos on your gadget without any error.

  • HT204150 I cloud has deleted the last 200 contacts from my list of 800 contacts.

    I cloud has deleted the last 200 contacts from my list of 800 contacts. I lost them from my phone and iMac, but was able to turn off my ipad so it could not erase them from there. After the letter "R" all the contacts are gone. Help? Anyone have a remedy?

    change your email passwords.

  • How could you create 'Last Time Contacted' Smart Mailbox in Mail app Lion?

    Hello!
    For the purposes of maintaining regular contact with a large group of contacts in your address book:
    How could you create a smart mailbox in the Mail App (Lion) which contained that last unique sent/received email from each individual contact?
    So ideally just the last email per contact. For my purposes I would then sort by date and find the contacts I havent emailed in a while and re-initiate conversation.
    I also thought that perhaps it would be possible through Automator? (I am not very familiar with how to use this app)
    Any ideas/solutions would be very appreciated!
    nmarks
    (running lion 10.7.4 macbook pro late 2011)

    Okay, I think I just discoverd a workaround. This will work if you're lucky enough to already have a smart-mailbox folder that persists after close. (Somehow I had two such folders that already existed and weren't subject to the mysterious disappearances on closing the app; perhaps I created them in a previous OS X release?) Anyway, here goes:
    Locate an already existing smart mailbox folder that's working properly. Select the folder (in the sidebar).
    Duplicate that folder using the "Duplicate Smart Mailbox" Command. (It's on the contextual pop-up menu or available via the gear icon in the lower left of the window). This should produce and exact copy of the folder and the boxes inside, appearing at the bottom of the smart mailbox list.
    Edit the duplicate folder to put the smart mailboxes you want in it, and delete the previous mailboxes (duplicates) that you don't want.
    The new folder structure should now persist between launches of the app.
    There you go. Not the most elegant process, but workable. Don't know if there's a method if you don't have at least one smart mailbox folder already though.

  • How do I send mail to last import contacts?

    I have a brand-new macbook pro (mavericks). I have imported my own contacts. I also have a file of OTHER contacts exported from a mac and mailed to me. I imported them into my CONTACTS book, no problem, and can find them looking at Last Import. BUT:
    a) I can't seem to change the name of that group to anything else.
    b) When I option-clicked on the Last Imports I was given the option of emailing to the group, so I chose it and put the message in Mac Mail. However, then both the gmail and the icloud servers said Last Import was not a valid email address. It shows simply Last Import in the address field.
    Now what? I generally use just gmail and bypass the mac Mail.  The accounts ARE enabled, though.

    I did this and the recipient gets an email From: Me and To: Me.
    If you are sending email to multiple recipients by bcc, the recipients should not be able to see the other recipients you are sending the mail to.  However, they will see who the email is from which is you!
    What is confusing me is how are your recipients getting your email if it's not addressed to them but to yourself?
    Have you tried rebuilding Mail?
    Which version of OS & Mail are you using?  Asking because your system profile is showing you are using Snow Leopard yet, you posted in the ML forum.

  • How do I find my last added contact which I didn't save

    IiPhone 4S can't find a contact I maybe forgot to save it how can I find it

    Hi If contact was a phone call click on phone icon go to Recent phone call check list. Cheers Brian

  • Client updates broken since last agent update

    Immediately after the newest version of the Agent updates apply themselves, all the computers I administer can no longer update.  When the Intune client is launched, it reports error code 0x80070057 and says Try Again.  When Try Again is clicked
    the error changes to 0x7007065b.  Attempts to repair the System Updater, both with FixIT and manually, fail, and report falures.
    This is happening on all of the over 250 machines I administer.

    Hello
    I confirm this problem.
    Some Windows 7 machines that were not in the latest update group can still download Endpoint Protection updates.
    The Windows 7 machines that are fully updated cannot update their protection definitions since May 14.
    Error code I receive is 0x80072f76 (ERROR_HTTP_HEADER_NOT_FOUND)
    Windows 8.1 machines are not affected.

  • [REQUEST] Last Agent

    http://code.google.com/p/lastagent/
    A Last.fm music tracker (not a scrobbler) for Linux that provides some of the missing functionality of the official client on local music. It allows you to love, tag or share the currently playing track, or add it to a Last.fm playlist, and more... All through a nice, neat and clean interface.

    try this one out.  i basically just took the commands from the install script and made them point to the correct directories for the fakeroot environment.
    pkgname=lastagent
    pkgver=0.3.02_4
    otherver=0.3.02
    pkgrel=1
    pkgdesc="A Last.fm music tracker that provides some of the missing functionality of the official client"
    arch=(i686, x86_64)
    url="http://code.google.com/p/lastagent/"
    license=('GPL3')
    depends=('python' 'pygtk' 'pylast' 'python-sexy' 'dbus-python')
    source=(http://lastagent.googlecode.com/files/lastagent-${pkgver//_/-}.tar.bz2)
    md5sums=('cef91efa7f7aaa2d70e282bed1765656') #generate with 'makepkg -g'
    build() {
    cd "$srcdir/$pkgname-$otherver"
    install -D ./lastagent ${pkgdir}/usr/bin/lastagent || return 1
    install -D -m644 lastagent.desktop ${pkgdir}/usr/share/applications/lastagent.desktop || return 1
    mkdir ${pkgdir}/usr/share/lastagent
    cp -rvf * ${pkgdir}/usr/share/lastagent/

  • I have had my iphone 5 stolen and last backed up approx. 2 months ago. I don't think I've ever gone through and set up PhotoStream however it has always appeared on my phone. Is there any way of getting back messages/photos/etc from the past 2 months?

    I have had my iphone 5 stolen/have lost my iphone 5. I haven't backed it up for a while (2 months?!) and I am not sure that I actually set up  Photostream however it's always been on there from what I can tell (icon is there). Is there anyway of getting back contacts/messages/photos/anything from the phone onto my new replacement phone if it hadn't been backed up recently? I've got everything up until the last backup - contacts and messages aren't such an issue for me but the photos mean a lot!!!

    If you are logged in to icloud with your same Apple ID. Go to setting on your phone>Photos & Camera and turn ON my Photo Stream.

  • HT1212 I have shattered my iphone 4s screen and cannot backup all the data through itunes because it is asking me to unlock it. I do not wish to repair the screen as I'd rather buy a new iphone, but I need the photos and contacts. How do I perform a backu

    P.S.
    I feel as though I am forced into repairing the iphone before I can backup the information (photos, videos, contacts). If the apple ID on the device is the same as the one on my iMac I do not understand why I have to unlock the iphone by typing in the 4 digit passcode. This is a little ******** as having the screen break seems to be the usual prpblem with the iphone, I want to be able to backup my files when I feel the obvious need to do so (eg. when it breaks)! I also believe I shouldn't have to use other apps for backing it up (which I obviously have to pay for).. I am rather angry with this issue.

    Okay folkes, you were right and I was wrong.. I admit it. But I was pretty mad though when I tryed to backup the last few contacts I needed for work and couldn't do so. Worst things are when something gets broken (by me or whatever) when there is an emergency. I needed the contacts off of that phone real fast and couldn't do it, thats what got me real mad. And btw I am a Russian living in Moscow and instead of having an official Apple store we have shopes called ReStore who resell apple devices with ridiculous prices, same thing with the repairs. It is cheaper to sometimes buy a new iphone then repair an old one.. So there.. but I repaired it and now happy again with my apple device.. Also I know the itunes and icloud are free and I do back it up, this time however I couldn't use them and had to try the iphone extractor app, which is not free. There.. Thanks for the attention every1

  • ISE 1.2 Profiling - User Agent attribute incorrect

    Hi all,
    Just troubleshooting some profiling issues and have found that multiple devices are profiling incorrectly eg MAC OSX profiling as Apple-Device. Basically the issue is the user-agent string profiled by ISE is incorrect meaning that only the OUI is matched. During the BYOD onboarding process, non Internet Browser, applications and services (games and OCSP Daemons etc) are presenting their specific user-agent strings eg "OCSPD\1.0.2" to ISE resulting in incorrect profiling.
    Does anybody have any suggestions on how to resolve this issue as it is resulting in about 50% of devices been profiled at the "top level" ie Apple-Device or Windows Workstation (anything based on User-Agent). Can any one explain whether profiler works on the basis of first agent received, last agent received and why it doesn't hold onto a list of presented agents to make a decision? In my mind this is a pretty big issue in that some of the more popular device profiling policies are based on a user-agent string thus potentially preventing you from defining tight Authz policies eg IPAD only etc

    "Unless you have suppression configured, ISE will continue to collect profiling data and will re-profile a device as long as a rule with higher certainty factor is hit. However, if the certainty factor is the same the device will remain at its originally profiled group."
    The suppression feature will not affect the re-profiling of a device.  The suppression only affects the logging on the MnT node.  Since the Profiling is a PSN function the suppression has no affect on the outcome of a profiling event. 
    You are correct in that a rule with a higher certainty factor "wins" and this is the profile that is chosen.  Again, an understanding of how profiles work is not the issue here.  
    For example say only the RADIUS and HTTP probes are being utilized for an endpoint.  There are two endpoints one is a iPad and the other an iPhone.  The endpoint attributes that are known about the device are the MAC OUI and the useragent. 
    Based on the default profiling rules there are two three things that need to be identified either an iPhone or an iPad.  The first common item is that the MAC OUI is identified as apple.  This increases the certainty factor by 10.  The second is either the HTTP User agent containing either iPad/iPhone or the DHCP hostname containing either iPad/iPhone.  Both of those conditions would increase the certainty factor by 20 for a total of 30.  Since DHCP is not being used in this example we can remove that for a possibility and say that for an iPhone to be profiled as an iPhone it must both have a MAC OUI of apple and the useragent must contain iPhone.  Same goes for iPad, but iPad in the useragent. 
    Like smcbridebpc stated every application that uses HTTP will have a useragent string.  The profiler rules assume that the useragent that is being used contains either the word iPhone or iPad to distinguish these types of devices.  If an application on the device sends a useragent string such as  "OCSPD\1.0.2" which is obviously the OCSP Daemon.  This useragent string is "stuck" on the endpoint and no other usable useragents can be used to profile the device.  Therefore a race condition exists and depending on the application that wins determines if the profiler will be accurate or not.   
    The only two solutions that I can think of would be to have a useragent filter that would allow you to manually filter out useragents like "OCSPD\1.0.2" (or the ISE developers could filter known unusable user agents out on the backend)  OR everytime a new useragent is presented to the profiler for a device the useragent is joined to a list of useragents. 
    If the useragent was overwritten everytime a new useragent was presented then it would cause the device to be reclassified everytime the different applications presented useragents which would not be good.  
    It does look like a bug may have been filed and marked as fixed in release pending, but the bug notes do not list enough information to identify if this is the same issue that we are seeing.
    https://tools.cisco.com/bugsearch/bug/CSCuj45373

  • Scroll bug in search result in contacts

    Got a bug in contacts when search result need to scroll (more than 10 results) cant choose last result contact. Its scroll away every time you trying to scroll it.

    I'd similar problems.
    The search option didn't find many massages I posted.
    Searching for JClient gives just a single item !!!!
    What's wrong ?
    TIA
    Tullio

  • Not all contacts listed on My Verizon page

    My contacts list on the My Verizon page does not show all of my contacts when selecting to show 'All'. There are two at the end of the list that do not show. However, if I select to show just the contacts starting with the letter W or the letter Z, then these missing contacts will be listed.
    When using Chrome version 28.0.1500.95 m, it will not show me the last two contacts as described above.
    When using Internet Explorer version 10.0.9200.16660 or Firefox version 23.0, it will not show me only the last contact.
    How can I resolve this?

    Interesting.  I was able to duplicate this - I have 255 contacts, and using Chrome, the last two are missing from the "ALL" list but there when clicking on the Y or Z (where those last two are located in the full list).  If I choose "contact Cards" view, I can scroll to ALL of them, but you are right, in the "List" view, the last two are missing.
    Since it seems to be a design error (the generated table containing the data is 34 px taller than the display area, cutting off the last two rows), and a relatively minor one at that, my guess is it won't be addressed any time soon, though I can try to get someone's attention on it.  The resolution would be to use card view or click on the last few letters of the alphabet to view those contacts; they are there, just not viewable in the one configuration.
    You can export the list and all the contacts are there in the export too.

  • Agent logout popup - supervisor alert

    Good morning,
    I would like to know if it is possible with UCCX 9.x to have the following:
    - When last agent from a CSQ logout, have a popup on his CAD with message that he is last available agent before he logout.
    - Once Last agent logout, play message if any caller still in the queue.
    - Send an alert via email to a certain email address (supervisor i.e.)
    Please give me any info/links explaining how to implement this. Thanks.
    B.R
    Ahmed

    Hi
    At the first go , it looks like a very difficult thing to achieve.  i am not sure if you can achieve this ,
    but here is some things you can try
    first of all , you have to put a " Get reporting statistics " step in all your scripts , which will check for how many agents are logged in to the Queue.
    then you have to use some " if \else " statement to pass some value to a variable ( you have to use an enterprise variable )
    like " if ( Agentloggedin ==1 )
             set lastagentloggedin ==1 )
    and then using enterprise variables from CDA , you can pass this value to CAD.
    and you can generate email from Script as well , depending upon  no of agent logged in and send that email to supervisors.
    now playing a message to agent , whether there is any caller in the queue , i am not sure how you can do that.
    i hope this helps you to start thing up.

Maybe you are looking for