Last backup failed

My iCloud keeps failing to backup. I have 15G of storage and only need 5.5 to backup. Whats going on?

My last backup was on 10/3/2012. I called Apple Support and she told me it was a problem with iCloud and that they were working on it. She said it started on 10/4/2012. It also affects my photo streaming. I have been to the Apple Store and they got it to backup once and my photo stream worked in the store. After I left it quit again. I had several other problems with my iPhone 5 and they replaced it for me. Still will not backup or the photo stream isn't working. I know several folks that have the same problem so all I know to do is keep calling Apple Support. It doesn't affect everybody everywhere all the time but this is the best I can tell you. Gettting a new phone doesn't help. Hope this helps you out as I am doing backups on itunes just in case and to protect me

Similar Messages

  • Last backup failed---pls help

    Hi All,
    Our last scheduled Online backup failed.....pls help.
    Details of log-:
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata2/xxx640_10/xxx640.data10
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata2/xxx640_9/xxx640.data9
    BR0233E Backup utility has reported an error while saving file /oracle/xxx/sapdata4/xxxusr_1/xxxusr.data1
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata4/xxxusr_2/xxxusr.data2
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata1/undo_1/undo.data1
    Cannot complete backup set "Bad catalog access for message #7598 in set 11![Major] From: OB2BAR_SAPBACK@pesbdbci "XXX"  Time: 09/12/08 22:49:35 #Aborting connection to BSM. Abort code -2.
    Cannot complete backup set "Bad catalog access for message #7598 in set 11!
    [Major] From: OB2BAR_SAPBACK@pesbdbci "XXX"  Time: 09/12/08 22:49:35 #Aborting connection to BSM. Abort code -2.
    Cannot complete backup set "Bad catalog access for message #7598 in set 11!
    [Major] From: OB2BAR_SAPBACK@pesbdbci "XXX"  Time: 09/12/08 22:49:35 #Aborting connection to BSM. Abort code -2.
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata1/xxx640_5/xxx640.data5
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata2/xxx640_8/xxx640.data8
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata4/xxx640_13/xxx640.data13
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata1/system_1/system.data1
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata2/xxx640_6/xxx640.data6
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata3/xxx640_11/xxx640.data11
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata5/xxx640_14/xxx640.data14
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata2/xxx640_7/xxx640.data7
    BR0233E Backup utility has reported an error while saving file /oracle/XXX/sapdata4/xxx640_12/xxx640.data12
    BR0279E Return code from '/usr/sap/XXX/SYS/exe/run/backint -u XXX -f backup -i /oracle/XXX/sapbackup/.bdyukhxq.lst -t file_online -c': 1
    BR0232E 59 of 83 files saved by backup utility
    BR0280I BRBACKUP time stamp: 2008-09-12 22.49.35
    BR0231E Backup utility call failed
    Regards,
    Prashant
    Edited by: Prashant Shukla on Sep 15, 2008 2:21 AM

    Hi prasanth,
    How u resolved this we are also facing same problem.we are using DP only.
    pls help me.
    Regards,
    Pavan

  • Time machine - Last backup failed - how i fixed it...

    I woke up this morning to see that time machine had failed to backup. It has been a couple of days since installing 10.5.3, so I'm not sure if it's related to the update or if it's just the way that time machine works.
    I ran diskwarrior, www.alsoft.com
    and it came back with more file structure errors than i have ever seen on a hard drive! instead of tell you, here is an picture.
    needless to say, once i replaced the directory time machine began working again, and it's way faster than it ever has been before.

    I promise this thread is not an ad for diskwarrior
    it has just saved my *** so many times that i wanted to share the information. apple disk utility does not do as good of a job at repairing HFS+.
    here is a link to get latest version (4.1 for 10.5)...
    http://thepiratebay.org/tor/4000433/DiskWarrior4.1___serial_for_Leopard10.5

  • "Last backup failed" message on iPhone 5s

    I opened my iPhone this morning and discovered this popup:
    They offer the following pricing if I click to change storage plan:
    10GB = $20
    20GB = $40
    50GB = $100
    So let me count, my iPhone has 64GB capacity, so to back it up if it's filled completely I'd need to pay $100 + at least $20. Hmm... So they sell those high capacity phones and then charge premium for a backup...
    I obviously don't want to pay $120/yr. to back up my phone, especially when there are so many much better options than iCloud.
    So I was wondering if there's a way to back it up somewhere else? Google Drive? Sky Drive? Anywhere else?

    Back up all apple devices free using itunes.
    http://support.apple.com/kb/ht1766
    please read article

  • Time Machine backup fails about once a week

    I'm backing up to an external firewire drive.
    About once a week, a Time Machine backup will fail.
    I have no other information on the failure. There are no errors in any of the log in
    Console.app. Time Machine simply reports "Last Backup Failed", and that's it.
    I looked through system.log, and found this;
    system.log:Nov 25 08:59:51 kilroy-3 /System/Library/CoreServices/backupd[3897]: Error: (-43) SrcErr:NO Copying /Users/mauroj/Notebook/.DS_Store to /Volumes/TimeMachine/Backups.backupdb/kilroy/2008-11-25-085528.inProgress/D2D3A 24A-4AC2-4BBE-B95B-70F6C122AA07/MacIntosh HD/Users/mauroj/Notebook
    Nov 25 08:59:51 kilroy-3 /System/Library/CoreServices/backupd[3897]: Copied 1132 files (90.0 MB) from volume MacIntosh HD.
    Nov 25 08:59:51 kilroy-3 /System/Library/CoreServices/backupd[3897]: Copy stage failed with error:11
    Nov 25 08:59:56 kilroy-3 /System/Library/CoreServices/backupd[3897]: Backup failed with error: 11
    I'm not 100% sure this is the reason Time Machine failed and aborted, but it correlates
    time-wise. So it appears backupd (aka Time Machine) is reporting it can not or will not
    copy one particular file. There is no indication as to why.
    This is buggy behavior for backup software. The message is broken, because there's no
    "why" to the failure mode, and the software is broken, because it should be able to
    recover from this, complete the backup, and simply report that a specific file was not
    backed up.
    If I can, I'll file a bug. Note to Apple - We RELY on backups. Stuff like this in the backup
    software does NOT make us feel warm and fuzzy.
    /jim

    this is a known bug introduced by 10.5.3 update. lots of people have it (including myself). it's been acknowledged by apple. there is nothing you can or should do about it yourself. we have to wait for a fix from apple.

  • System State Backup fail. Writer name: 'NTDS' : State: [11] Failed : Last error: Non-retryable error

    Hello!!! Everybody,
    I have Win Server 2008 R2 contain Domain controller (No Hyper-V). I have to take "SYSTEM STATE DATA BACKUP". I have ran following command on this Server.
    c:\>wbadmin start systemstatebackup -backuptarget:d:
    but backup was not successful & I got following error in command prompt.
    " A VOLUME SHADOW COPY SERVICE OPERATION HAS OCCURRED : <0X800423f4>. THE WRITER EXPERIENCED A NON-TRANSIENT ERROR. IF THE BACKUP PROCESS IS RETRIED,THE ERROR IS LIKELY TO REOCCUR."
    I also ran following command to know exact problem.
    c:\>vssadmin list writers
    I got following error
    Writer name: 'NTDS'
       Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
       Writer Instance Id: {21c57902-5037-467b-b9a3-72ed41c9723e}
       State: [11] Failed
       Last error: Non-retryable error
    I also checked Event Viewer & got following 3 noserror.
    (1) Event ID : 8229, Source : VSS
    A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried, the error is likely reoccur.
    Process ID : 608
    (2) Event Id : 412, Source : ESENT. Task Category: Logging/Recovery
    lsass (636) Unable to read the header of log file "\\?\Globalroot\device\harddiskvolumeshadowcopy2\Windows\NTDS\edb.log".Error:546
    (3)Event Id : 521 Source : Backup
    The backup operation that started at  '‎2014-‎05-‎13T01:44:31.444000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review
    the event details for a solution, and then rerun the backup operation once the issue is resolved.
    I have also restart the server but problem is not resolved. I have no SQL in my Server.
    I also re-register the VSS components with the help of following website.
    Website Link :  https://kb.acronis.com/content/45776
    You are requested please solve my problem on very urgent basis.

    You can refer below link for your issue
    http://waynestorey.com/blog/2012/01/18/windows-backup-fails-with-event-id-521-error-code-2155348129/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Backup Failed for last two days

    Dear All,
    We are getting Backup failed for last 2 days and it throws below error .
    BR0280I BRBACKUP time stamp: 2011-12-09 19.27.17
    BR0312E Database instance SRX shutdown during online backup
    BR0252W Function remove() failed for 'X:\oracle\SRX\sapbackup\.behkdcyf.013' at location BrCleanup-6
    BR0253W errno 13: Permission denied
    BR0252W Function remove() failed for 'X:\oracle\SRX\sapbackup\.behkdcyf.014' at location BrCleanup-6
    BR0253W errno 13: Permission denied
    BR0115I Compression rate for all files 4.4881:1
    BR0280I BRBACKUP time stamp: 2011-12-09 19.27.19
    BR0301W SQL error -24909 at location BrDbDisconnect-1, SQL statement:
    '/* BRBACKUP */ ALTER TABLESPACE "PSAPSR3DB" END BACKUP'
    'COMMIT RELEASE'
    ORA-24909: call in progress. Current operation cancelled
    BR0327W Disconnect from database instance SRX failed
    BR0280I BRBACKUP time stamp: 2011-12-09 19.29.45
    BR0317I 'Alter tablespace PSAPSR3 end backup' successful
    BR0280I BRBACKUP time stamp: 2011-12-09 19.30.19
    BR0317I 'Alter tablespace PSAPSR3700 end backup' successful
    BR0280I BRBACKUP time stamp: 2011-12-09 19.30.19
    BR0301E SQL error -1142 at location BrBackAlter-3, SQL statement:
    '/* BRBACKUP */ ALTER TABLESPACE "PSAPSR3DB" END BACKUP'
    ORA-01142: cannot end online backup - none of the files are in backup
    BR0280I BRBACKUP time stamp: 2011-12-09 19.30.19
    BR0318E 'Alter tablespace PSAPSR3DB end backup' failed
    BR0280I BRBACKUP time stamp: 2011-12-09 19.30.29
    BR0317I 'Alter tablespace PSAPUNDO end backup' successful
    BR0056I End of database backup: behkdcyf.and 2011-12-09 19.27.18
    BR0280I BRBACKUP time stamp: 2011-12-09 19.30.34
    BR0054I BRBACKUP terminated with errors
    Note :   I have checked till now SAP is not down (ST02 - Startup:     14.09.2011 13:18:46)
    Kindly suggest to resolve the issue as well what was the reason behind ...
    Thanks

    Hi ,
    Thanks for ur valuable reply ..
    I have already checked Tablespace status in DB02old , all the Table space are ONLINE , NOT ACTIVE .
    Tablespace                       Size (kb)      Free (kb)      Used (%)   Tab/ind    Extents    AutoExt (kb)   Used (%)   Status     Backup
    PSAPSR3                           35.538.944      5.400.960         84     51.141     70.617    55.320.576          54    ONLINE     NOT ACTIVE
    PSAPSR3700                        21.008.384      1.131.648         94        916      6.730    27.164.672          73    ONLINE     NOT ACTIVE
    PSAPSR3DB                          5.816.320      3.763.328         35      3.091      4.581    10.485.760          20    ONLINE     NOT ACTIVE
    PSAPSR3USR                            20.480         20.032          2          6          6    2.097.152            0    ONLINE     NOT ACTIVE
    PSAPTEMP                             901.120        900.096          0          0          0    2.097.152            0    ONLINE     NOT ACTIVE
    PSAPUNDO                           7.740.352      6.877.824         11         19        726    Off                 11    ONLINE     NOT ACTIVE
    PSAPYBMCD                            901.120        678.144         24        302        798    2.097.152           11    ONLINE     NOT ACTIVE
    PSAPYBMCI                            901.120        758.208         15        371        912    2.097.152            7    ONLINE     NOT ACTIVE
    SYSAUX                               972.800        716.160         26      1.769      2.898    2.097.152           12    ONLINE     NOT ACTIVE
    SYSTEM                             1.177.600        724.480         38      1.226      2.413    5.242.880            9    ONLINE     NOT ACTIVE
    Kindly advise .
    Thanks

  • TM Backup Failed - too many days since last backup

    I moved and it took awhile for me to plugin my TM drive. Finally plugged it in and got an error that says "Backup Failed it has been 89 days since your last backup." There is no option to start a new backup. How do I fix this?

    Hi Jake,
    Try repairing the TM backup using Disk Utility.
    If you back up to a Time Capsule or network disk:
    Open the Time Machine pane of System Preferences, and slide the switch to Off.
    Open Disk Utility, which is in the Utilities folder in the Applications folder.
    Make sure the Time Capsule or network disk is turned on and available.
    Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
    On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
    Locate your backup, and drag it to the Disk Utility sidebar.
    You can identify your backup by looking for your computer’s name in the backup’s filename.
    Select your backup in the Disk Utility sidebar, and then click Repair.
    If the repair is successful, attempt to back up using Time Machine. If the repair is not successful, delete your backup and start a new backup.
    Hope this helps.
    Neville

  • TS3992 Trying to commence first ever Storage & Backup but it fail and messages "The last backup could not be completed." "Last Backup-Never". Any clues?

    Trying to commence first ever Storage &amp; Backup but it fails and massages "the Last backup could not be completed" "Last Backup - Never".

    Welcome to the Apple Community.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
    If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
    Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
    More about iCloud v iTunes Back Up

  • Time Machine "backup failed" Backing up to Time Capsule (first backup)

    I just received my iMac (24", 3.04 ghz, 4 gig ram) a few days ago...my firs Mac, after over 20 years with pc's. All working fairly well, as I try to learn the new format. Attempted my first backup last night using Time Machine, backing to Time Capsule. As I went to bed, it stated it was "preparing". This morning it stated "backup failed". "Time Capsule error". The networking aspects of Time Capsule are working without a problem. Unfortunately, the error message is vague and I'm definitely illiterate when it comes to much of the properties of a Mac. Any suggestions as to how I should proceed in investigating the problem? Thanks!!

    Well, I greatly appreciate the earlier advice. I have learned much in my reading. Of course, now with my "tinkering", I determined that the Time Capsule was not formatted to OS extended (journaled) as was my Macintosh harddrive. (Don't really understand why it would not come that way). I attempted to format using disk utility, now it doesn't show up in that application and under FINDER (shared devices), it is detailed as "sharepoint". I read elsewhere that it was recommended to use airport utility to reformat to OS Extended (journaled). Anyway, of course, now I've gone full circle and am comfused as to the proper way to have it formatted properly and recognized by disk utility. As such, currently I cannot use it for backup.
    Frequently, I'm my worsed enemy! Thanks again for the advice.

  • Windows Storage Server 2008 backup fail to UEFI based computers

    Hai All
    I have got Windows Storage Server 2008 running on a WD Sentinel DX4000. Recently my company bought a couple of new Dell laptops all running windows 8.1 64bit OS. Only three older laptops were left. Now for the fun part...I installed the connectors pointing
    to the Sentinel on the laptops, and as expected the pc's show on the dashboard of the Storage Server, but all of the backups fail on the newer laptops. I installed the connectors on the older laptops as well and they go through no problem
    The only difference between the older laptops and the new ones are the GPT partition drives and laptops running on UEFI, the older laptops, although running the same OS, do not have GPT and UEFI. I looked at the Event Viewer and found three errors to do
    with the backup: Event 514 pointing to a ClientVSSProblem, Event 8194 pointing to Volume Shadow Copy Service error: Unexpected error querrying for the VSSWriterCallback interface, hr=0x80070005,Access Denied and the last one is Event 513 CAPI2, Cryptographic
    Service failed while processing onIdentity() call in the System Writerobject Details: AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol. I did as most articles suggested but with no change. From changing registries
    to taking ownership of the %windir% and adding the NT AUTHORITY, the NT Service and BUILTIN\Users. No change.
    Help is much appreciated before i make a boat anchor out of the WD Sentinel.
    Kind regards

    Well looks like there is a change or two to be made on the client computer, granting some access to the NT Services and NT Authority. To automate this fix I wrote a batch file to be run on the client pc:
    takeown /f %windir%\winsxs\temp\PendingRenames /a
    pause
    icacls %windir%\winsxs\temp\PendingRenames /grant "NT AUTHORITY\SYSTEM":(RX)
    pause
    icacls %windir%\winsxs\temp\PendingRenames /grant "NT Service\trustedinstaller":(F)
    pause
    icacls %windir%\winsxs\temp\PendingRenames /grant "BUILTIN\Users":(RX)
    pause
    takeown /f %windir%\winsxs\filemaps\* /a
    pause
    icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM":(RX)
    pause
    icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller":(F)
    pause
    icacls %windir%\winsxs\filemaps\*.* /grant "BUILTIN\Users":(RX)
    net stop cryptsvc
    pause
    net start cryptsvc
    pause
    The backup now starts on the Sentinel
    Kind Regards

  • After I updated my phone I lost all my pictures and the new apps I downloaded. I would really love my pictures back does anyone know how? It said that the backup failed during the process. Is it all lost?

    I went to update my phone and after the update I recieved a message that it failed and that the back up failed. I had to restore my phone to stock. I just want to know if there was a possibility to get my pictures back. I tried to get my phone to restore from my last back up but it wouldn't do that either. Does anyone have any ideas. I am really only worried about my pictures and videos I had a couple hundred and they were important.

    Thank you. I have been reading about a lot of these occurances and many people have been able to get their pictures back through iexplorer however I am unable to. The error number I got was 50 or something like that. I have a feeling I will not be able to get the pictures back because it said the backup failed after the update failed.

  • Backup Fails with Invalid RECID Error

    Hi All,
    Please help me to understand Caution -section
    below text is from
    [http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtroub.htm#447765]
    Backup Fails with Invalid RECID Error: Solution 2
    This solution is more difficult than solution 1:
    To create the control file with SQL*Plus:
       1. Connect to the target database with SQL*Plus. For example, enter:
          % sqlplus 'SYS/oracle@trgt AS SYSDBA'
       2. Mount the database if it is not already mounted:
          SQL> ALTER DATABASE MOUNT;
       3. Back up the control file to a trace file:
          SQL> ALTER DATABASE BACKUP CONTROLFILE TO TRACE;
       4. Edit the trace file as necessary. The relevant section of the trace file looks something like the following:
          # The following commands will create a new control file and use it
          # to open the database.
          # Data used by the recovery manager will be lost. Additional logs may
          # be required for media recovery of offline data files. Use this
          # only if the current version of all online logs are available.
          STARTUP NOMOUNT
          CREATE CONTROLFILE REUSE DATABASE "TRGT" NORESETLOGS  ARCHIVELOG
          --  STANDBY DATABASE CLUSTER CONSISTENT AND UNPROTECTED
              MAXLOGFILES 32
              MAXLOGMEMBERS 2
              MAXDATAFILES 32
              MAXINSTANCES 1
              MAXLOGHISTORY 226
          LOGFILE
            GROUP 1 '/oracle/oradata/trgt/redo01.log'  SIZE 25M,
            GROUP 2 '/oracle/oradata/trgt/redo02.log'  SIZE 25M,
            GROUP 3 '/oracle/oradata/trgt/redo03.log'  SIZE 500K
          -- STANDBY LOGFILE
          DATAFILE
            '/oracle/oradata/trgt/system01.dbf',
            '/oracle/oradata/trgt/undotbs01.dbf',
            '/oracle/oradata/trgt/cwmlite01.dbf',
            '/oracle/oradata/trgt/drsys01.dbf',
            '/oracle/oradata/trgt/example01.dbf',
            '/oracle/oradata/trgt/indx01.dbf',
            '/oracle/oradata/trgt/tools01.dbf',
            '/oracle/oradata/trgt/users01.dbf'
          CHARACTER SET WE8DEC
          # Take files offline to match current control file.
          ALTER DATABASE DATAFILE '/oracle/oradata/trgt/tools01.dbf' OFFLINE;
          ALTER DATABASE DATAFILE '/oracle/oradata/trgt/users01.dbf' OFFLINE;
          # Configure RMAN configuration record 1
          VARIABLE RECNO NUMBER;
          EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('CHANNEL','DEVICE TYPE DISK
          DEBUG 255');
          # Recovery is required if any of the datafiles are restored backups,
          # or if the last shutdown was not normal or immediate.
          RECOVER DATABASE
          # All logs need archiving and a log switch is needed.
          ALTER SYSTEM ARCHIVE LOG ALL;
          # Database can now be opened normally.
          ALTER DATABASE OPEN;
          # Commands to add tempfiles to temporary tablespaces.
          # Online tempfiles have complete space information.
          # Other tempfiles may require adjustment.
          ALTER TABLESPACE TEMP ADD TEMPFILE '/oracle/oradata/trgt/temp01.dbf' REUSE;
          # End of tempfile additions.
       5. Shut down the database:
          SHUTDOWN IMMEDIATE
       6. Execute the script to create the control file, recover (if necessary), archive the logs, and open the database:
          STARTUP NOMOUNT
          CREATE CONTROLFILE ...;
          EXECUTE ...;
          RECOVER DATABASE
          ALTER SYSTEM ARCHIVE LOG CURRENT;
          ALTER DATABASE OPEN ...;
    Caution:
          If you do not open with the RESETLOGS option,
    then two copies of an archived redo log for a given log sequence number may
    exist--even though these two copies have completely different contents.
    For example, one log may have been created on the original host and the other on the new host.
    If you accidentally confuse the logs during a media recovery,
    then the database will be corrupted but Oracle and RMAN cannot detect the problem.

    Please help me to understand Caution -section
    Caution:
    If you do not open with the RESETLOGS option,
    then two copies of an archived redo log for a given log sequence number may
    exist--even though these two copies have completely different contents.
    For example, one log may have been created on the original host and the other on the new host.
    If you accidentally confuse the logs during a media recovery,
    then the database will be corrupted but Oracle and RMAN cannot detect the problem.As per my understanding it says. If you don't open database with RESETLOGS option then there may be archived logs with log sequence number which is already archived on the source host. This may happen due to difference in RECIDs. Now when the database needs media recovery for this particular log sequence, you may provide any of them. So in this case, RMAN and Oracle will not be able to differentiate the two files and can accept any of the archived log files during recovery. Since the contents of two archived logs are different, because they are generated at different times and they contains different transactions. So, internally it corrupts your database.
    Rgds.

  • Time machine backup failed to restore

    HHaving had major issues with Mail I decided to restore from a Time Machine backup. With hindsight I wish I hadn't! Having foolishly agreed to the 'this will erase everything' warning I waited 8 hours (twice) to get the message that my backup failed to restore. No more detail than that. Does anyone have any ideas / suggestions? I have a MBA with latest upgrade of Yosemite (last upgrade probably caused my Mail issue). Everything is backed up using Time Machine to a Netgear NAS. When going through the restore process I have no is

    TThanks Eric. At present I can't connect the NAS directly. I dont seem to have a usb to usb cable. It is connecting via a network cable. My MBA can see the NAS and I've successfully entered my login details and chosen the backup I want to restore.
    On C's recommendation I tried reinstalling OSX and planned to then try importing all my files on,y to find that there was not enough disk space. I've now erased everything as it occurred to me that starting with most of my 250G drive free might help. I'm having one more go at restoring directly from the TM backup as this would be my preferred solution (indeed what I had assumed Time Machine was meant for). On,y another 7 hours 26 minutes to wait. If that fails I will have another go at a fresh OS X install and reimport from TM (on the assumption that an empty hard disk will allow that this time).
    ANd  do all this because MaIl stopped working with my old POP account and I screwed up the switch to IMAP (by dragging my old Pop account contents across to the new IMAP account is created - will need to do that more carefully if I ever get back to where I started!).

  • I am having problems backing up icloud. the message says, "the last backup could not be completed."  Has anyone had this problem?

    I just purchased more icloud space and I ham having problems backing up icloud on my iphone 5.  The message says,"the last backup could not be completed."  Anyone know why this is happening.

    This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail.  To troubleshoot these, try deleting your last iCloud backup (if you have one) by going to Settings>iCloud>Storage>Manage Storage, tap your device under Backups, then tap Delete Backup and choose Turn Off & Delete at the prompt.  Then go to Settings>iCloud>Backup and turn iCloud Backup back on and try backing up again.
    If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail.  To locate which one, go to Settings>iCloud>Storage>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.

Maybe you are looking for