Last called list?? Customized frequent called lis...

On my old phone, I could press the down arrow on the 4-way key pad, and up would pop a list of my few, frequently called contacts.
Is there any way of doing that on Nokia phones?
I have a 6085. I've set up My Shortcuts and it shows a long scrolling list of contacts, including many preset ones. One alternative is "All Calls", though I'd really like an option of showing recent calls or a subset of my contact list.
Any suggestions?

On my old phone, I could press the down arrow on the 4-way key pad, and up would pop a list of my few, frequently called contacts.
Is there any way of doing that on Nokia phones?
I have a 6085. I've set up My Shortcuts and it shows a long scrolling list of contacts, including many preset ones. One alternative is "All Calls", though I'd really like an option of showing recent calls or a subset of my contact list.
Any suggestions?

Similar Messages

  • Viewing call list during a call

    Currently i'm using iphone4s with latest ios. It seems ios doesn't support viewing of the dial list during a call. More specifically, if you earlier dialed a number which is not saved in phone book, you can't see that number during next call. This seems bad. I had to tell the last dialed no to the person whom i was talking in the ne t call. I really had to disconnect, check/memorise the number and call again. I checked with latest windows, its missikg there as well. Any clue?

    I just tested this out on my phone and your correct you can't view the call history while on a call.

  • Call List Mangement - IC Web Client

    Hi Gurus,
    We are using SAP CRM 2007. I am calling transaction : CRMD_TM_CLDIST using transaction launcher in IC Web Client with  team lead business role so that I can Split the Call List, Assign the Call List to CSRs and Activate the Call List. When I select the Call List and right click on to view the list of the commands (as of SAP GUI screen) to work the Call List Management - does not shows me any options (such as split or assign or activate). Does any body know, how to get this work?? please help me out....
    Cheers,
    Peter J.

    Hi John,
    Thank you very much for your quick reply and guidance. I know the company which used PCUI - Call List screen, unofficially I came to know that SAP responded this company back saying that, SAP does not have plans to remove this PCUI screen/code from the future upgrades...
    Once again thank you very much for your quick responses and the guidance. I will close this link...
    Cheers,
    Peter J.
    Hi John,
    2 corrections:
    1. We are using IE 8.0
    2. Transaction Code CRMD_CLMANAGMENT is not working in CRM 2007, we did the following:
    a) Add URL to the URL Repository (SM30 table = crmv_ic_ltx_url) as BSP Application. Application = CRM_BSP_FRAME and Page = Entrypoint.do
    b) Create Transaction Launcher entry  (CRMC_UI_ACTIONWZ)
    c) Crete Logical Link in (CRMC_UI_NBLINKS)
    d) Call/Add the logical link to NavBar Profile
    e) Add NavBar Profile to Business Role
    f) Activate the logical link in Business Role (if necessary)
    Cheers,
    Peter J.
    Edited by: Peter Jacks on Mar 25, 2010 9:30 AM

  • Call list Generation

    Hi All,
    Can any one help me to solve this issue.
    1. How the call list are generated & how it will be distributed to agents
    Thanks
    Gentila

    hey,
          You will first have to maintain the calling hrs fo the business partners in transaction BP under the tab <b>Control</b>. also maintain the calling hrs for the contact presons via the relationship tab.
        Once this is done you can generate the call list via transaction <b>CRMD_CALL_LIST </b> here you will have to maintain the followin settings.
    transaction type: Pcal
    BP number :
    Business hrs: A calling hrs
    Under call list tick generate call list
    mention the responsible user and organization
    and tick on activate assigned list.
    now go to transaction <b>CRMD_TM_CLDIST</b>
    Find you call list initiall it will be inactive assign your org to it and activate it.
    Now create a call list profile and assign it to your Ic Web profile.
    Regads,
    Diana Dias.
    Reward with points!!!!!!!!!!!!!

  • Call list management - urgent

    Hi,
    I need to generate a call list using campaigns and assign the call list to a number of agents.
    Does creating a campaign with communicaiton medium "telephone" generate a call list or a call list has to be generated manually using the target group created in the campaign? moreover, if the list was automatically generated using campaigns, who is authorized to access and distribute this call list? Is it the person who was made responsible for the campaign or the IC Manager?
    Second question, how is it possible to divide a generated call list and distribute it to different agents?
    Deserving points shall be rewarded , Best regards,
    Jacob.

    Hi Jacob,
    1. The IC manager will be authorized for the generated call list through call list management.
    2. The generated call list has to be assigned to Organizational Structure, It will appear in the IC WebClient for the agent.
    The IC Manager or Manager assign a call list to the agents through portal.
    3. Agents can select the call list that they would like to work on.
    Hope It helps.
    Regards,
    Johnny.

  • Chage Call list via WEB UI

    Hi experts
    in interaction center, the users can see the call lists assigned, but they can't modify it.
    So, is possible change/delete call lists via WEB UI??? For example add a call at the list, or delete all the call list??
    Best regards
    Marco

    Hi,
    Starting CRM 7.0 SP4 a lean version of the Call List Management application was developed.
    It does not cover all the functionality of the SAP GUI application.
    Here is a list of features that are covered in this version of the WebUI application:
    - Quick search
            View options: tile layout and editable overview page with assignment block
    - Advanced search
            View options: tree view and table view
    - Creation of new call lists
    - Edit existing call lists
          Update contact persons: When editing a call list, you can update the contact persons. By default, the relationship type Has contact person is considered. Contact persons for whom the Do not contact checkbox is selected, are not added to the list of contact persons.
    The following tabs are available:
    Call List Details
    Execution Progress
    Assignment
    You can create and delete assignments.
    Calls (display only)
    Business context (display only)
    If you are interested in using this lean version you must upgrade to CRM 7.0 SP4, where this functionality has been made available or else you can always carry on with the SAPGUI version of the transaction CRMD_TM_CLDIST.
    Hope this information helps.
    Best Regards,
    Vinod

  • 9300 - Unable to delete calls list

    My 9300 froze mid-call over Christmas and I had to remove the battery to restart it. I am now unable to delete the calls lists and Received calls continues to show the calls I received in December, but nothing since. Any ideas?

    15-Jan-2007
    12:27 PM
    rich wrote:
    Hi, I would double check that the date is correct, otherwise is your overall Log empty? If not might be worth clearing and trying again.Message Edited by rich on 15-Jan-2007
    12:27 PM
    The date and time sorted the problem. I had to rechange the date and time to THE FUTURE as all of them were logged as in July 2007 PM and then clear the list of calls. then on restart corrected the date and time again. many thanks. now i need to get it to begin logging calls again. thank you for your help

  • Interaction Center User cannot see Call List

    Hi Gurus,
    I have created a new call list with some calls and I assign it to an user and I have also activated the call list, but when I enter to the WebClient UI with that user who has a business role which have the option to see the call list, the call list assigned to the user doesn´t appear. Which might be the problem?
    Thanks and regards.
    Jesú

    Hi,
    From the top of my head:
    GO to the transaction used by the Call center manager
    Find the call list
    Assign it (depends on your scenario, you can assign it directly to the teleagent or to the Telecenter)
    Activate the call list
    Sometines, you need to be careful that the teleagent belons to the right Telecenter
    Hope it helps,
    D.

  • Why is it that some missed calls don't show up in the missed calls list?

    Why is it that some missed calls don't show up in the Missed Calls list?

    Missed calls can only appear in your missed call list if your phone knows about them.  In other words, if the phone rang, but you did not answer.
    If a call was missed because your phone was turned off or not in a strong enough service area to receive the call, then it will not show up on your phone.

  • Get call list.

    Hi,
    I need all the call lists for given user. I used 'CRM_CLM_CALL_LIST_SEARCH' but it is not giving us all the values.
    Is there any other function module I can use to get the call list for given user id?
    Please help.
    Cheers,
    Ashish

    This FM is used to read call list for given call list id. But I need the call list for given user id.
    Kindly pass the name of function module which takes user id as input parameter and gives output of all the call list assigned to it.
    Cheers,
    Ashish

  • Over the last several weeks I have had TERRIBLE service.  Dropping calls, can't make calls, etc.  Been a verizon customer 10+ years.  I've never had such shotty service.  WHATS UP!?!?!

    Over the last several weeks I have had TERRIBLE service.  Dropping calls, can't make calls, etc.  Been a verizon customer 10+ years.  I've never had such shotty service.  WHATS UP!?!?!

    wutwut123 wrote:
    We live in a rural area and are still not offered anything better, so we have used dial up internet for several years. Quality has always been just fine, getting connections of 28.8-40k or higher, which is perfectly normal for dial up. However lately we have seen a rapid decline in the quality and speed of connections. While still useable, it has been annoying. This last month however I can only rarely connect at a speed higher than 9.6kbps. Sometimes it is even lower at 7.2k or even 4.8k. I know verizon is only obligated to provide high enough speeds for phone calls, but these low speeds are simply unacceptable for dial up internet use. Many programs wont even connect at all at speeds lower than 14.4k. Atm my dial up account that i'm paying monthly for is basically not useable at all.
    How can I actually get verizon to do something about this. I don't want to be given the runaround by someone over the phone telling me they don't have to give use any higher speed connections. This is a complaint about suddenly dropping use to such terrible service compared to what we used to have for several years. Shouldn't this be addressed so that I can actually use my dial up account without so many problems?
    I feel like our line has somehow been limited to only connect at these low speeds. Is something like that possible? How can we get verizon to stop doing that and actually connect our calls at decent speeds? I just want a return to the good service we used to receive if they aren't going to bring dsl/fios out here.
    Did you try calling oyur ISP to see if it's something on their end?  I know when I was on dial up years ago I had to change to a different number once in my area as something was wrong with the one I had always used to dial into AOL, maybe that's it.  Mary

  • Custom fields in Call List

    Hi,
    I have a requirement to add new fields to the Call List screen in Web UI(component CRMCMP_CLM).
    My first thought was to append structure CRMS_CLM_CALL but I've got a message "Structure CRMS_CLM_CALL cannot be enhanced".
    Anyone had a success in adding new fields to the call list???
    Thanks

    Hi ,
               There r two ways in creating a zclass at context node level.
    1. Just generate the getter-setter methods of any of the attributes of the context node. OR
    2. Create a z class with the std class as its super class and in teh create_call method of the contect class, replace the std class with the z one. Also in the .htm page attribute replace the std class with teh z one.
    Regards,
    Ruby.

  • IPhone 5s Recent Call List Limit

    What is the Recent Call List Limit for an iPhone 5s?
    Can you view the entire Recent Call List Limit from the screen?
    Today, as I would delete a call from the list, an older call would appear at the bottom of the list.
    Thanks!

    The Recent call list will display the last 100 calls.
    You can scroll through the list to see from the beginning to end.

  • How can I call a custom javascript function when clicking on cfgrid cell.

    I would like to call a custom javascript function when
    clicking on a cell in an cfgrid (of html format). The closest thing
    I can find is to use the HREF="" attribute, but it doesn't seem to
    work with javascript inside it.
    Simple example:
    <cfgridcolumn name="Foo" header="Foo"
    href="javascript:customFunction(#ID#);">
    Do I need to tap into the underlying Ext JS funtionality? If
    so, where can I start?
    Thanks!

    Hi,
    According to your post, my understanding is that you want to hide/show list columns based on specify the permission for Users, SharePoint Groups or Active Directory Groups.
    Here is a solution from CodePlex for your reference:
    SharePoint 2013 Column & View Permission
    https://sp2013columnpermission.codeplex.com/
    Best Regards
    Dennis Guo
    TechNet Community Support

  • IC Web Client: Requirement: After click on button END back to CALL LIST

    Hello Experts,
    we are using CRM 2007 (6.0).
    I have to implement the following requirement:
    When the user clicks on the button END in Interaction Center the user should come back to the CALL LIST.
    Right now the the system always is getting back to IDENTIFY ACCOUNT. This is not very comfortable for the user as he or she has always make a view clicks to come back to the call list in order to call the next account (customer).
    I tried to implement the required behaviour using rule policies (Intent Driven Interaction).
    I customized the following:
    If
    Current Event Equals Interaction ended
    Then
    Navigate To ( Navigation Object type:Action = "IC_BT_IHI:B" )
    Now I am pretty sure that the event 'Interaction Ended' is the right one, BUT my action is not correct! The system does not jump back to the call list.
    My problem is that I can't find the correct action which gets me back to the CALL LIST!
    Or is there another way to implement this requirement?
    I would really appreciate your help!
    Thank you and kind regards,
    Roman
    Ps: Actually there is an action called CALLLIST:B (Call Lists:Display) but this action does not seem to work properly!
    Edited by: Roman Richter on Feb 28, 2011 11:55 AM
    Edited by: Roman Richter on Mar 29, 2011 11:12 AM

    Hello Experts,
    we are using CRM 2007 (6.0).
    I have to implement the following requirement:
    When the user clicks on the button END in Interaction Center the user should come back to the CALL LIST.
    Right now the the system always is getting back to IDENTIFY ACCOUNT. This is not very comfortable for the user as he or she has always make a view clicks to come back to the call list in order to call the next account (customer).
    I tried to implement the required behaviour using rule policies (Intent Driven Interaction).
    I customized the following:
    If
    Current Event Equals Interaction ended
    Then
    Navigate To ( Navigation Object type:Action = "IC_BT_IHI:B" )
    Now I am pretty sure that the event 'Interaction Ended' is the right one, BUT my action is not correct! The system does not jump back to the call list.
    My problem is that I can't find the correct action which gets me back to the CALL LIST!
    Or is there another way to implement this requirement?
    I would really appreciate your help!
    Thank you and kind regards,
    Roman
    Ps: Actually there is an action called CALLLIST:B (Call Lists:Display) but this action does not seem to work properly!
    Edited by: Roman Richter on Feb 28, 2011 11:55 AM
    Edited by: Roman Richter on Mar 29, 2011 11:12 AM
    SOLUTION:
    Customizing was missing:
    Define Generic OP Mapping:
    Flag at 'Use Link ID'
    Maintain IC_CALLIST in Logical Link ID

Maybe you are looking for