Last Data Update in Visual Composer and Web App Designer

Hello,
We want to show the last data update in query result and we used 2
differents ways to do it: throught Web Application Designer (SP 12) and
Visual Composer (SP 10).
In query result of Web Application Designer, the last data update came
in GMT0 and in visual composer came ok (GMT - 3, that's our time zone).
This value (ROLLUPTIME) is taken out of the RSMDATASTATE table and this is used in SAPLRSMDATASTATE program, that is called by Web App Designer.
Why does the difference exist between: Web App Designer and Visual Composer for last data update?
So, I need more information how the Visual Composer brings the correct value (in our time zone) and Web App Designer in GMT0.
Best Regards,
Pablo Moraes

Hi Mario,
Yes, i used the same user and the same query to access the information. But, how can i check the mapping from my VC user to the BI user?
Regards,
Pablo Moraes

Similar Messages

Last Data Update Info field not showing in Web Template

Last Data Update Info field does not show up in the Web Template. This Web Template is for a MultiProvider on top a single cube.
Greatly appreciate if anyone has any insight into this issue.

Hi Suma,
if other queries work fine using exactly the same (customized) template the problem is most likely not the template. Does the appropriate query does display figures? Is your data binding done correctly within the template?
What happens if you execute the customized template which does not display Last Data Update Info field with another (i.e. a different) query? Does it display the Last Data field? What happens the other way round: you execute a different template with the appropriate query (which does not display Last Data Update). Does it show the Last Data Update?
Just give it a try, this sometimes help
Brgds,
Marcel

Last data update

Hi,
How I can find the last data update information(date and time) of multiprovider in BW?
Kindly help on this.
Regards
Mukul Singhal

Let me explain how the "last data update" works.
If the query is based on one cube or DSO, it is the time of the last request upload.
If the query is based on a multiprovider, like the example given ealier,
assume there are three cubes in multiprovider :
Last update of cube1 is 11/17/2008
Last update of cube2 is 11/19/2008
Last udpate of cube3 is 11/20/2008.
The "last data update" will be the earliest day of the "last data update"s of all partproviders, i.e.11/17/2008.
Because the meaning of "last data update" is that, data (of all partproviders) has been already updated until this time.
Now we assume there are three cubes like this in multiprovider :
Last update of cube1 is 11/17/2008
Last update of cube2 is 11/19/2008
Cube3 is empty. It has never been loaded with any request.
Then the "last data update" will be empty. Because until no time has all partproviders been updated. This is the design of the system.
Regards,
Patricia

Integration Visual Composer and BPM (netwearver CE7.11)

Hi Guys.
System: netwearver CE7.11
We have a problem with the process of integration between Visual Composer and BPM. We have found a message |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2011e628-b317-2c10-9fa7-952155e10705] explaining the step by step to join my visual compeser with BPM.
The steps from guide(the guide includes a video) already have been implemented and the final result looks fine, but it is in this moment, when we want to create and deploy the BPM process with the result from guide(Web dynpro wrapp with the visual composer), when the error happens, the BPM process is created OK but not properly deployed.
Could anyone help us?, thank you in advanced.
The message error is:
Status ERROR
Plugin : com.sap.ide.tools.services
code=0
children=[
Status ERROR
Plugin : com.sap.ide.tools.services
code=0
Deploy Exception.
com.sap.engine.services.dc.api.deploy.DeployException: [ERROR CODE DPL.DCAPI.1027] DependenciesResolvingException.
Reason: ASJ.dpl_dc.006505 [ERROR CODE DPL.DC.3033] An unresolved dependencies error occurred while sorting the deployment batch items regarding the dependencies.; nested exception is:
com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDependenciesException: [ERROR CODE DPL.DC.3437] Unresolved dependencies found for the following deployment items: [
1. Component: name: [firsttask], vendor: [demo.sap.com], location: [localDevelopment], version: [20090617122840], software type: [J2EE], csn component: [], dependencies: [[name: 'tcblloggingapi', vendor: 'sap.com', name: 'tcddicruntimefacade', vendor: 'sap.com', name: 'tcaiibaseofflinefacade', vendor: 'sap.com', name: 'tccmi', vendor: 'sap.com', name: 'tcvcglxbridgecomp', vendor: 'test.sap.com', name: 'tcblexceptionlib', vendor: 'sap.com', name: 'tcbljrfcapi', vendor: 'sap.com', name: 'tcwdapi', vendor: 'sap.com']]
Unresolved dependency:
name: 'tcvcglx~bridgecomp', vendor: 'test.sap.com' ( not found in the admitted batch items and the repository)
Edited by: iaspano on Jun 18, 2009 5:31 PM

Hi,
Is 'tcvcglx~bridgecomp' already deployed or part of the deployment? There is a deploy time dependency specified. Thus without this DC the other DC won't deploy.
Cheers
Martin

Query on Virtual cube 0FIGL_V10 show old "Last Data Updated:" on Portal

Hello all,
We are using the SAP delivered virtual cube for G/L financial statements reporting. We are running these queries on Portal (BI 7.0) we are using the 0ANALYSIS_PATTERN template. Now since we are not actually loading data in this cube the template show "Last Data updated" as long time back, I am guessing when the cube was last activated or transported.
The template and time stamp is working perfect for queries on all other cubes or Multiproviders.
The business users are asking can we have the actual time stamp there (when actually the data was last loaded),
Does anyone have any idea how we can do it without actually rewriting the queries on standard cube.
Thanks in advance,

Hi Kiran,
Always last update data status only will see in our reports on last data updated date. It may be activation of data in cube. please check is there any option of activate data in data flow level.
Try to create one record in remote data source and load it again. It may be find the latest status.
Thanks,
Chandra

On which object the "Last data update" is calculated when a query is built

Can anybody tell me that the information "Last Data Update" (in a query output) comes from which object ? I want to know the technical details .
I know that if a query is built on a Multiprovider, then the "Last Data Update" will show the least loaded request date among the Infoproviders. But I want to know which object keeps this information.

Hi Papiya,
I think it is related to text elements SYUSEIT and also to 0REQID.
-Pradnya

BO Advance analysis 1.1.4, Info Field like Last Data Update Table

Hi Experts,
I am using BO Advance analysis 1.1.4 for reporting output. There we have option to show Info Field like Last Data Update.
It is using this function to get that info :
=SAPGetSourceInfo("DS_1", "LastDataUpdate")
Anybody have idea what BW table it is refering to get that info.
As per my understanding, since these workbook of Adv. Analysis are refering Query which are built on MultiProviders, it go and find out the last cube/dso successful data load.
Also I manually checked the date and time of last successful update in cube, but it is not matching as far as time is concern. Date is matching.
Please help me to get the correct table which gave that info (date and time).
Thank-You.
Regards,
Vinod

Hi Tammy,
I was trying for the similar requirement to get the "Last refreshed time" of the table used in the calculation view in HANA.
It uses the same formula : =SAPGetInfoLabel("LastDataUpdate")
But since Analytic View actually doesn't store any data, it is virtual. The date am seeing is the last changed date. i.e if i do any changes on the model, am seeing the last date when I changed it.
Is there any function which we can use to get the Last refreshed date of the table in the model am using?
Regards,
Krishna Tangudu

When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

Don't panic. OS X 10.5.8 is the most popular PowerPC OS out there. People run it everyday without security breaches, including myself. It isn't Windows!
If you're really that worried, I highly recommend Sophos Anti-Virus for Mac Home Edition. Supports PowerPC & Intel and Mac OS X 10.4-10.7.
http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/system-requirements.aspx
Direct download: http://downloads.sophos.com/home-edition/savosx_73_he.dmg

How to hide the Last date Update in the Excution of a report

Dear All,
When we execute a query in EP, the Out Result will contain the following Options
1) Save As
2) Open
3) Export Excel
4) Information
5 ) Comments
6) Filters
7) Settings
8) Last data update
Can anyone plese tell me how to give the authorisation in BI for the above options.so that we can give restrictions for some users.
hope everything is crear.
Please give me the hint atleast

You also have to test the value:
REPORT ztest MESSAGE-ID 00.
DATA: BEGIN OF itab OCCURS 0,
        f1 TYPE i,
        f2 TYPE i,
        f3 TYPE i,
        f4 TYPE i,
      END OF itab.
DATA: sel_field(20),
      value TYPE i.
DO 5 TIMES.
itab-f1 = sy-index.
itab-f2 = sy-index + 10.
itab-f3 = sy-index + 20.
itab-f4 = sy-index + 30.
APPEND itab.
ENDDO.
LOOP AT itab.
WRITE: /001 itab-f1, itab-f2, itab-f3, itab-f4.
HIDE itab.
CLEAR itab.
ENDLOOP.
AT LINE-SELECTION.
CLEAR: sel_field,
         value.
GET CURSOR FIELD sel_field.
IF sy-subrc = 0.
    CASE sel_field.
      WHEN 'ITAB-F1'.
        value = itab-f1.
      WHEN 'ITAB-F2'.
        value = itab-f2.
      WHEN 'ITAB-F3'.
        value = itab-f3.
      WHEN 'ITAB-F4'.
        value = itab-f4.
    ENDCASE.
    MESSAGE s001 WITH 'Value of' sel_field 'is' value.
ELSE.
    MESSAGE s001 WITH 'Invalid field selected'.
ENDIF.
Rob

Exception occured when deploying in Visual Composer with web dynpro mode

Hi,All
when I deploy application in visual composer with web dynpro mode, exception occured as following, please help me.
Thanks.
best regards
Jiande Ding
The initial exception that caused the request to fail, was:
   com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application sap.com/tcwd4vcengineconfigstd for startup. Reason= Clusterwide exception: Failed to start application sap.com/tcwd4vcengineconfigstd: The referenced application sap.com/tcwd4vccorestdinfoactors cannot be started. Check the causing exception for details. Hint: Is the referenced application deployed correctly on the server?
    at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1494)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
    ... 8 more
Edited by: Jiande Ding on Nov 4, 2008 1:08 PM

Hi
Check out this link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/7c/9ce742bdab5604e10000000a155106/frameset.htm
Thanks

What is the last version update in apple tv and how can i know what is my Operating System

What is the last version update in apple tv and how can i know what is my Operating System
i have an apple tv 3
thx

6.1
Settings > General > About > Apple TV Software

Ever since the last iTunes update, my cloud movies and TV purchases all vanished from my iTunes library.

Ever since the last iTunes update, my cloud movies and TV purchases all vanished from my iTunes library. I go to Settings>Store>Show Cloud Purchases, but Show Cloud Purchases isn't there. So, I go to the store, then click on purchases, and I download anything from my iTunes account. Now, I go to Settings>Store>Show Cloud Purchases, and it is back. I check the box, and my cloud purchases are again back in iTunes.
OK, I wouldn't bother posting this, but a day or so later, it all happens again. Cloud purchases gone, no option to fix in the Settings>Store menu until I go to the store and download something again.
How do I get iTunes for Windows to keep showing my cloud purchases without having to do this silly work-around every day or two?

Audiobooks are not avaiable for redownload from iTunes, though I suspect you may find they are still on your computer even if not currently listed in your library. This may help...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
Would you mind telling me which anti-virus package you use? It may be that it is disturbing iTunes when it tries to write out the fresh database, as it does after almost any activity with your library. I'm noticing more of this type of problem than usual and trying to see if there is any pattern. It may help to prevent a repeat of the problem if you look at the advanced options for your AV package and see if you can find a way to exclude the iTunes folder from any real-time scanning process.
tt2

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

Site search and web app search !

how can I get a one web app search function to search all the fields within the web app. It seem I need a search field for each data fiefield in the web app.
Ideally my clinet wants a holistic search so that it will search all content within the site - most of which is within web apps ?
also does anyone know hoew you can edit the the result results icon - so if the web app is a news instead on the box I could put a news icon ?

Liam, thanks for your response. Unfortunately, the client wants a single search in the header of the entire site that will search both pages and web app content (without missing the custom field data), So I guess i am/was looking for a work around rather than a replacement.

Filtering dates in Web App Designer

Hiya
I've been trying to find a way to filter my queries so that my sales information is up to a certain date.
I don't want to use a prompt to specify the range since my users do not like prompts. Instead, they want to be able to use a dropdown or radio button within the report to select the month/year. Based on that selection, they want all sales data to be returned up to that selected month/year. I've noticed that the radio button/dropdown list in Web App Designer filters sales data of that particular month/year instead of up to that month/year. Do you guys know if there is any other way of doing this?
I.e. Users selects October 2005 in the dropdown and the report is filtered to only display data up to october 2005.

This can be done using custom Javascript. You will have to use the BW Web item dropdown box assign cal month and select the option display only values which will render all the possible values with the option tag. Use a Javascript function to read the value the user selects and form the URL with the high and low value you want as filter. The attached How to document has similar kind of scenario.
https://websmp201.sap-ag.de/~sapdownload/011000358700003825382001E/HOWTOMULTIPLESELECTION.DOC
Thanks.

Last Data Update in Visual Composer and Web App Designer

Similar Messages

Maybe you are looking for