Last ditch effort to avoid BSOD due to nv4_disp.dll

greetings-
been reading several old posts regarding the nv4_disp.dll causing the page fault in nopaged area bsod error. i have tried all drivers- the ones on the msi cd, 1.13, 2.0, and 2.03. and have tried to emperically determine the source of the crashing.
noticed that after installing xp sp1a (needed for 2.0 and 2.03), been getting the bsod.
i've memtested my ram for 6+ hours, it's all good.
i've found that xp in fat32 fs crashes more often than in ntfs. (so no use of fat32).
i've found that the mouse cursor becomes a green glob of vertical lines whenever i play an mpeg2 video in mediaplayer9 or 8, and in both directx9 or 8. (not sure if this is a factor)
before i go back to the 1.13 nforce drivers, i'm going to test out a few configurations.
specifically:
winxp + sp1 + 2.03
winxp + sp1 + 2.00
winxp + 2.03
winxp + 2.00
last ditch effort
winxp + sp1 + 1.13
winxp + 1.13
and yes, each time will be a fresh install from a reformated HD.
questions:
what is the difference between sp1 and sp1a?
can i install 2.03 drivers without installing sp1? nvidia says that failure to do so will result in no usb 2.0 support. i don't plan on using usb 2.0.
thanks
joe

ok, bit the bullet and bought the antec true power 430. i was at the store, and i thought, well i've already spent $85 on the PSU, might as well purchase an FX 5200 and free up the 32MB shared memory. then i thought, well got the FX 5200 TRD128 with the "what looked really cool" media center deluxe 2 on the box and what the heck, i'll buy a dvd-rom so i can make full use of the media center (since i already had the TV@nywhere card). so i ended up doing a major overhaul of the computer and so far so good.
thanx for the suggestions

Similar Messages

Bsod hardware acceleration nv4_disp.dll firefox 4.0 xp pro

hello,
if i use Firefox 4.0 on xp pro, the machine crashes very quickly.
the bsod says there's a problem with nv4_disp.dll
so i think it's cause of the hardware acceleration into firefox 4.0 that crashes windows xp cause of the nvidia driver.

Thanks for the info, I will investigate further.
I definately think it's the driver though, the RAM I use has been 100% stable with everything else. I have 640MB Kingmax PC133 SDRAM. I have tried going back to my 512MB using 2 sequential (same batch) 256MB SIMMs and that make no real difference.
The strange thing is, it will only happen once in a while, and during those occasions I am generally NOT doing anything special... I usually have around 90% resources free and 400MB or RAM free.... then BSOD.
I am hoping MSI will release another driver soon 30.81 is stable and released, so maybe that will fix my problems.

Even after complete factory reset in a last ditch effort, my macbook is still awful. Why? Please help.

Aright, I'm really hoping I can get some help here. This macbook is the most expensive thing that I own.
So, I start up my macbook pro 13inch running macvericks a few days go and for some reason the fans are going full last and it's terribly sluggish. I dug around a bit and realized spotlight was indexing. I let it finish, then restarted my computer later that day. Then, as soon as it started back up this time the fans were going full speed again. I take care of my macbook, and I've never let it get close to overheating, then only thing that I do on it is browse the web, write, and record music using garageband. I was worried, so I looked at activity monitor and kernel_task was running full speed. I looked forever on the internet for a solution and found some useful tips about editing plists that solved my cpu problem. However, my fans still went full speed after I gave them some time to transtion, with a reset and all. So, at this point and I'm frustrated with merely the noise, I look around for fan control software and none of it stifled the raging monstrosity that has become my fan. My logic at this point? Back up everything and do a full wipe of the hard drive and reinstall mavericks. So I did. Here I am with a blank macbook pro that is now just as slow as it was and the fans are still going full speed. I can't believe I spent a years worth of saving to just have it suddenly combust on me like this. I hate to whine, but please help me. Now, the activity monitor shows levels of up to 80% cpu usage and no explanation on top of that. It's still incredibly loud and not hot at all. It's difficult to type this to you guys because my computer doesn't want to catch up. I read some stuff about involuntary indexing, I'll let the macbook run for a while today and see if anything starts to change. You're my lost hope guys. I called apple support but they wanted 19 dollars just to see if they could fix it or not, I didn't have the money to pay them now and I won't until school starts in a week, wherein I will deseprately need a fully functional macbook, the one that I paid for in August 2012 with literally all my savings.
*also, before I factory reset the macbook I did an smc and pram reset, I also took out the batter from inside the machine for 30 seconds.

Hi,
I am having the exact same problem with my macbook pro, I was just wondering if you ever got a solution for your problem? Its been persisting for 3 days and i literally just wiped the system and am in the middle of reinstalling mavericks as we speak (i too resorted to a desktop) It was only after that i saw this thread, and now i regret wiping the system knowing it probably wont work.. but however, fresh start and all that jazz. My warranty ended just last week so im pretty disappointed with the timing, and i cant afford to keep up the warranty another year. If you could give me a solution or some guidance that would be great!
Thanks!
Hannah

[svn:bz-trunk] 8964: Fix LCDS-953 - Add a last ditch catch block to the service() function to avoid any possibility or leaking exception info.

Revision: 8964
Author:   [email protected]
Date:     2009-07-31 12:07:09 -0700 (Fri, 31 Jul 2009)
Log Message:
Fix LCDS-953 - Add a last ditch catch block to the service() function to avoid any possibility or leaking exception info.
Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-953
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

Dear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav

Revertindg from Vista back to XP, last ditch attempt to keep the touchsmart I.

Hi
I have had the touchsmart for just under 2 years -one of the unlucky first few to get it...- and am frankly at the end of my teather with it. I even have problems with the typing!
I have decided to give it a last shot rather than swiftly get rid of it on ebay, and load windows xp on a last ditch attempt to sort it out and keep it.
I have windows XP on disc as I still use it with my vaio laptop, but would not be doing anything unless I had clear instructions (do not want to make things more difficult than they already are).
Anyone has instructions for it please?
At the moment, it is running on Vista Home Premium and even the same brand HP All-in-One (7210) printer thar the PCWorld salesman sold me at the same time(Feb07) stating it will be "fully compatible" with the touchsmart, does not run all functions properly (another issue I tried to resolve separately)!!!

I feel your pain about Vista. I bought 2 Touchsmart computers and these are my first with Vista.
I have had an innumerable number of problems with Vista, as I imagine you have. Of course, HP is of no help whatsoever, and Microsoft won't help us since Vista was OEM installed.
As far as XP, it is far superior in EVERY way to Vista, but I don't have a tablet PC version and I refuse to spend another dime on this Touchsmart, SO, the touchsmart sits gathering dust (mostly) and I am using my 4 year old XP machine.
I actually tried to post an item on eBay today with the Vista, but I couldn't complete the ad (javascript refuses to ever work) so I had to start over with the XP machine.
It's amazing, my 4 year old machine does almost everything faster than the touchsmart which HP advertises as blazing or lightening fast speed.
Good luck !
Message Edited by lizard on 01-18-2009 05:18 PM
Message Edited by lizard on 01-18-2009 05:19 PM
What was I thinking when I bought an HP ?
Oh yea, I wasn't !
IQ504 & IQ506

Last ditch attempt! Nano not recognised by pc at all....

Hello
I'm posting on here as a last ditch attempt before I look into sending my nano away....
the only place the pc acknowledges it now is in the 'safely remove hardware' box.
It isn't recognised in iTunes, My Computer, or even Device Manager. The nano itself is showing the folder and exclamation point icon, with the iPod support URL underneath (unless connected to the pc, when it does show the 'do not disconnect' screen as normal).
When I try to use the Updater I get messages such as 'iPod Service error' , 'Can't mount iPod', etc etc. A couple of times it did let me 'Restore' but to no avail, and we're not even getting that far now! I've tried resetting, in disk mode etc. I've reloaded iTunes, tried a different USB port, reloaded the iPod software.
I've had it all of three weeks and was just sorting out playlists for the first time when it decided to disappear and not return.
If anyone has any bright ideas I can try before sending it away, I'd be really grateful.
Many thanks
Fiona
Dell PC Windows XP
Dell PC Windows XP

Well...
I have now ascertained that it is recognised in the Device Manager....under USB as 'USB mass storage device'. In 'Properties' it assure me the 'device is working correctly'.
Reformatted the iPod hard disk in 'disk mode' and it let me back to the Updater 'Restore' screen, but this time the message was 'firmware update failure; Disk write error'.
Can anyone enlighten me as to what this means in plain English??!!! I'm guessing it means 'totally f*$£"!! send it back...'!
I realise I am on similar territory to a lot of other forum users here, so have tried the bits and pieces mentioned, although I haven't tried formatting the drive the USB is connected to as someone mentioned....can't work out which drive it is....again, any advice would be great.
many thanks
Fiona

Cancelled subscription to Premium, Appalled at last ditch attempt to keep my business

Hi Community I wanted to copy for you the email I sent to the last ditch 'premium@spotify' email address, which appeared as I tried to cancel my subscription. I was appalled that having struggled to get any effective technical help for months, there appeared an address which I had so far never encountered. I saw this as a last ditch attempt by Spotify to retain my custom. I was appalled. I have an apple iphone and Mac, and i have for months had problems syncing my iphone, and loosing offline playlists, messages saying i have too many or not any devices synced. I spent two hours today checking with my internet provider that it wasn't the UPnP setting, which it wasn't, as I thought. Yesterday I had an inane email response from technical support which repeated the Spotify sites online 'Help' protocol, which I have followed, like so many of you, many times over the last few months. I responded to Spotify's technical email with the information that I had carried out all of the proceedures and have heard nothing back from them. Therefore I have decided to return to the free usage and save the £9.99 a month to support the sale of music in stores and online. I have been a supporter of Spotify since the begining. This is a real shame to see it get out of sync with it's customers and I was sorry to feel the need to write the letter below. Good luck with your technical issues and God bless. Dear Premium@SpotifyI assume this email address to ‘premium@spotify’, is a last ditch attempt to help me resolve my technical issues and retain my business. I can tell you that if that is the case, it is too late, and I would strongly encourage you to move to a more effective technical support protocol which might involve an online chat service or call centre functioning within working hours, to achieve more immediate contact and resolution for your customers.I have struggled to gain technical assistance and a response to my issues, for several months and more pointedly in the last 48 hours. I have followed similar cases to mine on the ‘Community’ pages and see that little or no effective advice is given. My interpretation is that Spotify is either not keeping up with technical updates from other software manufacturers, or is under attack from saboteurs which inhibits the full technical function of Spotify Premium. What ever the reason for the poor technical management of the site, it would appear to indicate a lack of consideration and care for its longstanding and ongoing supportive customers.If you are concerned to look into my issues, I emailed technical support, you should be able to locate my email and response. I was extremely disappointed with your action and have indicated on the Community page that it is unviable to continue as a paying customer with an inadequate site. You can find that email too if you want. I will be monitoring yours and others responses as far as i can.With dismay.Meredith Irwin.

I feel your pain about Vista. I bought 2 Touchsmart computers and these are my first with Vista.
I have had an innumerable number of problems with Vista, as I imagine you have. Of course, HP is of no help whatsoever, and Microsoft won't help us since Vista was OEM installed.
As far as XP, it is far superior in EVERY way to Vista, but I don't have a tablet PC version and I refuse to spend another dime on this Touchsmart, SO, the touchsmart sits gathering dust (mostly) and I am using my 4 year old XP machine.
I actually tried to post an item on eBay today with the Vista, but I couldn't complete the ad (javascript refuses to ever work) so I had to start over with the XP machine.
It's amazing, my 4 year old machine does almost everything faster than the touchsmart which HP advertises as blazing or lightening fast speed.
Good luck !
Message Edited by lizard on 01-18-2009 05:18 PM
Message Edited by lizard on 01-18-2009 05:19 PM
What was I thinking when I bought an HP ?
Oh yea, I wasn't !
IQ504 & IQ506

NX8600GT and nv4_disp.dll BSOD

Hey all, hope someone out there can help.
I recently built 3 PCs to exact same spec (as per my sig) except 1 runs Vista Ultimate and 2 run XP Pro.
For both the XP Pro machines we are experiencing random BSODs almost daily
This only happens when using CTRL-ALT-DEL (we are in a corporate domain) to lock screen or when XP kicks in the screen saver, but not every time C-A-D is used or screen saver kicks in.
It always reports nv4_disp.dll as the culprit and it is always a 1000008e error code
When first built the PCs were tested over a weekend using MemTest+ and overnight using Orthos and all passed.
The Vista PC does not suffer this issue.
The latest ForceWare is installed but the services and startup utilities are disabled due to the XP roaming profiles issue.
TIA
Shevek

Quote from: Bas on 03-December-07, 23:34:45
I don't think your problem is videocard related at all.
More like your system has a shortage of power, the PSU you use is very light compared to the system you have build.
However, I have no clue how Asus uses power for the board and CPU etc...so it's hard to say where the problem is.
My advice is use a far more powerful PSU and see if it solves it.
The PSU is the one which came with the Antec NSK6850 case. I'll see if I can find a spare one in the office somewhere.
My only query against this is that an identical PC running Vista (in fact drawing more power as it has an extra Raptor in it) has no issue at all.

NV4_disp.dll - repeatedly BSOD

Just updated (late last night)to the latest msi vga drivers, and now I I get repeatedly BSOD's stating erronous NV4_disp.dll
Tried to go back to old drivers, without any luck.
Also I have OC'ed the card to 600/300 a few days ago, but it was running smoothly until today
now whats the most likely to cause this fault, a corrupted driver or the OC?
saint

saint,
Have you tried running without overclocking?
Richard

TS1277 In The last Apple Itunes update it deleted the file MSVCR80.DLL, how do I get it back, i have followed all the instructions to remedy this lost file to no avail.

In the last Apple Itunes update it deleted the file Msvcr80.dll, how do get it back so I can download Itunes again?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

I use Windows 7 and can't get itunes to start due to msvcr80.dll missing.

I use Windows 7 and can't get itunes to start due to msvcr80.dll missing. I downloaded and installed latest version of itures and can't get it to start. Any suggestions?

Hi, I followed others yesterday with the same problem and removed all Apple Inc programs, rebooted and reloaded iTunes appears to of sorted this issue but as others have found OUTLOOK now takes ages to load and open ??

I can't transfer my data from my PC due to missing DLL what can I do?

recently converted from PC to Mac and tried to transfer files with migration asst. but was given an error message that simpley said it could not finish due to missing DLL file. How do i solve this problem?

I'd try the Windows Compatibility Community for a more focused audience.
https://discussions.apple.com/community/windows_software/windows_compatibility

Nv4_disp.dll BSOD on MSI TI4600

I get a BSOD after playing Everquest for over 30 mins and tehn changing to char selection screen, it refers to either "nv4_disp.dll" or "PRF_LIST_CORRUPT", it started happening after i changed from the 21.83 NVIDIA driver to the newest 30.82 (i dont get the looping error)
After having trie all sorts of things i decided to reinstall my system with a complete HD wipe, with this new system, i was stupid enough to NOT install the old 21.83 drivers, and have been unable to make them install, so i still get the BSOD on a brand new install.
I have used MSI live update so BIOS and everything is the newest possible.
my system specs are as follows
CPU: Intel P4 1.8 Ghz
MB: MSI 8xx (im at work dont remember exact model)
Sound: SBlive 5.1
RAM: 2*512 MB Kingston 1.part
Graphic Card: MSI G4 TI4600
Anyone out there that have the same problem, and/or a solution?

Oh well !
I have the problem too and I have WinXP too.
I think, the problem is not RAM but, the library nv4_disp.dll
My PC:
P4 1.8Ghz (Notrhwood)
256 DDR RAM 333Mhz
MSI G4 TI4400

5700 ultra BSOD and nv4_disp.dll

Just got a MSI 5700 Ultra yesterday and am now suffering random BSOD's (they all seem to mention NV4_disp.dll). I've reformatted the drive and done a clean install of XP Pro (with all the latest service pack stuff) and installed 53.04 detonators, to no avail.
I'm running:
2800XP Barton
ASUS A7N8X Delux Mobo
1GB 3200 Ram (TWINMOS)
I've changed most of the stuff recently(but it seemed fairly stable until I installed the 5700),
Does anyone have ideas?
Oh, I've also got a 500W PSU, so I don't think it could be a power problem.
Hope someone can help before I kick it down the stairs!!!!!
Ratchy

Added signature with PSU rating as suggested, also using detonator (forceware 53.3).
IRQ's as follows:
ISA:
0 system timer
1 keyboard
3 (COM 2)
3 (COM 1)
6 Floppy disk controller
8 System CMOS/clock
9 Microsoft ACPI
10 MPU-401 MIDI
12 PS/2 mouse
13 Numeric data processor
14 Primary IDE
15 Secondary IDE
PCI:
5 nForce PCI System Management
18 Silicon Image Sil SATAR Controller
19 GeForce FX 5700 Ultra
20 3Com Ethernet Controller
20 nForce MCP netwoking adapter
20 Standard HCD USB Host Controller
21 NVIDIA nForce MCP Audio Processing Unit
21 OHCI IEEE 1394 Controller
21 Standard HCD USB Controller
22 NVIDIA nForce Audio Codec Interface
22 Standard Enhanced PCI to USB Host Controller
Hope this helps?
Any suggestions

BSOD due to access violation in dfsc

Our new (not yet production) file server (W2k12) crashed last night due to an access violation in dfsc.sys. Afaik it happened the first time, but I am not totally sure. I also was unable to find out whether this is a common problem with a known fix. Windbg
output is:
MODULE_NAME: dfsc
FAULTING_MODULE: fffff80363a82000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 5010aaed
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - Die Anweisung in 0x%08lx verweist auf Speicher 0x%08lx. Der Vorgang %s konnte nicht im Speicher durchgef hrt werden.
FAULTING_IP:
nt!RtlRemoveUnicodePrefix+7d
fffff803`63e5e6fd 483919 cmp qword ptr [rcx],rbx
CONTEXT: fffff88008692870 -- (.cxr 0xfffff88008692870)
rax=0000000000000000 rbx=fffff8a068545920 rcx=0000000000000008
rdx=fffff8a068545920 rsi=0000000000000801 rdi=0000000000000802
rip=fffff80363e5e6fd rsp=fffff88008693270 rbp=fffffa804478eec0
r8=fffff8a068545920 r9=0000000000000053 r10=0000000000000005
r11=fffff8a05f0fc5f0 r12=fffffa804478ee58 r13=0000000000400000
r14=0000000000000000 r15=fffff88001c19110
iopl=0 nv up ei ng nz ac po cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010297
nt!RtlRemoveUnicodePrefix+0x7d:
fffff803`63e5e6fd 483919 cmp qword ptr [rcx],rbx ds:002b:00000000`00000008=????????????????
Resetting default scope
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x3B
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff88001c2be61 to fffff80363e5e6fd
STACK_TEXT:
fffff880`08693270 fffff880`01c2be61 : fffff8a0`685458e0 fffffa80`4478ee20 fffffa80`4478eec0 fffffa80`4478ee20 : nt!RtlRemoveUnicodePrefix+0x7d
fffff880`086932a0 fffff880`01c1b604 : fffff8a0`31531340 fffffa80`4478ee20 fffffa80`4478eec0 fffffa80`4478ee20 : dfsc+0x1ae61
fffff880`086932e0 fffff880`01c29799 : 00000000`00000000 fffff880`08693380 fffff8a0`0ac77d18 00000000`00000000 : dfsc+0xa604
fffff880`08693340 fffff880`01c1d7ef : fffff880`01c19140 fffff880`08693500 00000000`ffffffff fffff8a0`31531340 : dfsc+0x18799
fffff880`086933b0 fffff880`01c1dd01 : fffff880`01c19140 fffff880`08693470 00000000`ffffffff fffff880`08693508 : dfsc+0xc7ef
fffff880`08693410 fffff880`01c1d9f9 : 00000000`00000000 fffff880`08693500 00000000`ffffffff fffff8a0`62436644 : dfsc+0xcd01
fffff880`086934a0 fffff880`01c1dd01 : fffff8a0`f93fb250 fffff880`01c19130 00000000`00000009 fffff8a0`0ac77d18 : dfsc+0xc9f9
fffff880`086934d0 fffff880`01c1ca72 : fffff8a0`f93fb250 fffff8a0`0ac77d10 00000000`00000009 fffff8a0`304b6590 : dfsc+0xcd01
fffff880`08693560 fffff880`01c20151 : 00000000`00000001 fffff880`01c19110 00000000`00000000 fffff880`01c19110 : dfsc+0xba72
fffff880`086935a0 fffff880`0205c411 : fffffa80`ac0495c0 fffff8a0`0ac77d10 00000000`00000000 fffff803`63b6c967 : dfsc+0xf151
fffff880`08693620 fffff880`0205d4b6 : fffff880`086937a0 00000000`00000000 00000000`00000000 fffff880`086936d0 : mup!MupSurrogatePurgeNegativeCacheEntry+0x4975
fffff880`08693680 fffff880`00a694ee : fffffa80`57593960 00000000`00000000 00000000`0000003e 00000000`00000270 : mup!MupSurrogateGetUncProviderDeviceObject+0x806
fffff880`08693750 fffff880`00a9335d : fffffa80`590ed2e0 fffffa80`6c4b6d10 fffffa80`446fe0f0 00000000`00000801 : fltmgr!FltReleaseContext+0x90e
fffff880`086937f0 fffff803`63eae818 : 00000000`00000000 00000000`00000005 fffffa80`575939f8 00000000`000007ff : fltmgr!FltGetRequestorProcessIdEx+0x189c1
fffff880`086938a0 fffff803`63eab8c5 : fffffa80`4acf6cd0 fffffa80`4acf6cd0 00000000`00000000 fffffa80`44700190 : nt!NtAllocateVirtualMemory+0x5c98
fffff880`08693a80 fffff803`63ebb238 : 00000000`00000000 fffff880`08693c48 00000001`00000040 fffffa80`4304b080 : nt!NtAllocateVirtualMemory+0x2d45
fffff880`08693bd0 fffff803`63eb63de : 00000000`00000000 00000000`00000000 fffff8a1`b9575e01 ffffc0f0`7729e80a : nt!ObOpenObjectByName+0x258
fffff880`08693ca0 fffff803`63ec48d9 : 000000a1`34a3e430 ffffc0f0`00100080 000000a1`34a3e438 00000000`00000000 : nt!ObCreateObject+0x6ee
fffff880`08693d40 fffff803`63adb453 : 00000000`00000340 fffff803`63efa0c6 fffff880`08693df8 00000000`00000000 : nt!NtCreateFile+0x79
fffff880`08693dd0 000007ff`345f313a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeSaveStateForHibernate+0x2a33
000000a1`34a3e3c8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007ff`345f313a
FOLLOWUP_IP:
dfsc+1ae61
fffff880`01c2be61 41bbfeff0000 mov r11d,0FFFEh
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: dfsc+1ae61
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: dfsc.sys
STACK_COMMAND: .cxr 0xfffff88008692870 ; kb
Does anyone know about this problem and its cause?
Thanks in advance,
Christoph

I came in this morning and found that one of my servers rebooted unexpectedly overnight. A search based on details from the crash dump brought me here. Looks like we're running into the same issue.
Hardware: HP DL580 g7
OS: Server 2012 Standard
The DFS Roles are NOT installed on this server, though we do have some DFS in use on other servers. This server does have Deduplication installed and running, I wonder if that use the DFS driver for something?
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff8028fe676fd, Address of the instruction which caused the bugcheck
Arg3: fffff88008cb8870, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!RtlRemoveUnicodePrefix+7d
fffff802`8fe676fd 483919 cmp qword ptr [rcx],rbx
CONTEXT: fffff88008cb8870 -- (.cxr 0xfffff88008cb8870)
rax=0000000000000000 rbx=fffff8a04d1dde50 rcx=0000000000000008
rdx=fffff8a04d1dde50 rsi=0000000000000801 rdi=0000000000000802
rip=fffff8028fe676fd rsp=fffff88008cb9270 rbp=fffffa809e06f780
r8=fffff8a04d1dde50 r9=0000000000000000 r10=0000000000000003
r11=fffff8a002b15470 r12=fffffa809e06f718 r13=0000000000400000
r14=0000000000000000 r15=fffff880019e1110
iopl=0 nv up ei ng nz ac pe cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010293
nt!RtlRemoveUnicodePrefix+0x7d:
fffff802`8fe676fd 483919 cmp qword ptr [rcx],rbx ds:002b:00000000`00000008=????????????????
Resetting default scope
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: rdpclip.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff880019f3e61 to fffff8028fe676fd
STACK_TEXT:
fffff880`08cb9270 fffff880`019f3e61 : fffff8a0`4d1dde10 fffffa80`9e06f6e0 fffffa80`9e06f780 fffffa80`9e06f6e0 : nt!RtlRemoveUnicodePrefix+0x7d
fffff880`08cb92a0 fffff880`019e3604 : fffff8a0`35bde8f0 fffffa80`9e06f6e0 fffffa80`9e06f780 fffffa80`9e06f6e0 : dfsc!DfscRmUnlinkReferral+0x95
fffff880`08cb92e0 fffff880`019f1799 : 00000000`00000000 fffff880`08cb9380 fffff8a0`5431f1c8 00000000`00000000 : dfsc!DfscCacheStore+0x410
fffff880`08cb9340 fffff880`019e57ef : fffff880`019e1140 fffff880`08cb9500 00000000`ffffffff fffff8a0`35bde8f0 : dfsc!DfscGetDsDCReferral+0x121
fffff880`08cb93b0 fffff880`019e5d01 : fffff880`019e1140 fffff880`08cb9470 00000000`ffffffff fffff880`08cb9508 : dfsc!DfscRmValidateDomainIterate+0x53
fffff880`08cb9410 fffff880`019e59f9 : 00000000`00000000 fffff880`08cb9500 00000000`ffffffff fffff8a0`62436644 : dfsc!DfscValidateReferral+0x109
fffff880`08cb94a0 fffff880`019e5d01 : fffff8a0`0bfde2d0 fffff880`019e1130 00000000`00000009 fffff8a0`5431f1c8 : dfsc!DfscRmValidateRootGetParent+0x79
fffff880`08cb94d0 fffff880`019e4a72 : fffff8a0`0bfde2d0 fffff8a0`5431f1c0 00000000`00000009 fffff8a0`54dc3840 : dfsc!DfscValidateReferral+0x109
fffff880`08cb9560 fffff880`019e8151 : 00000000`00000001 fffff880`019e1110 00000000`00000000 fffff880`019e1110 : dfsc!DfscCmValidateState+0x7e
fffff880`08cb95a0 fffff880`01da4411 : fffffa80`aa256a20 fffff8a0`5431f1c0 00000000`00000000 fffff802`8fb75967 : dfsc!DfscSurrogateCreate+0x105
fffff880`08cb9620 fffff880`01da54b6 : fffff880`08cb97a0 00000000`00000000 00000000`00000000 fffff880`08cb96d0 : mup!MupCallSurrogatePrePost+0xd1
fffff880`08cb9680 fffff880`00b644ee : fffffa81`6b6ff080 00000000`00000000 00000000`00000029 00000000`00000270 : mup!MupCreate+0x766
fffff880`08cb9750 fffff880`00b8e35d : fffffa81`6cb2ec80 fffffa81`63b3e990 fffffa80`9e773440 00000000`00000801 : fltmgr!FltpLegacyProcessingAfterPreCallbacksCompleted+0x25e
fffff880`08cb97f0 fffff802`8feb7818 : 00000000`00000000 00000000`00000005 fffffa81`6b6ff118 00000000`000007ff : fltmgr!FltpCreate+0x34d
fffff880`08cb98a0 fffff802`8feb48c5 : fffffa81`6c459a90 fffffa81`6c459a90 00000000`00000000 fffffa80`9e76d630 : nt!IopParseDevice+0x173c
fffff880`08cb9a80 fffff802`8fec4238 : 00000000`00000000 fffff880`08cb9c48 00000001`00000040 fffffa80`9d122f20 : nt!ObpLookupObjectName+0x806
fffff880`08cb9bd0 fffff802`8febf3de : 00000000`00000000 00000000`00000000 fffff8a0`01d3ac01 ffff592b`2abb430d : nt!ObOpenObjectByName+0x258
fffff880`08cb9ca0 fffff802`8fecd8d9 : 000000d9`b3a4e5e0 ffff592b`00100080 000000d9`b3a4e5e8 00000000`00000000 : nt!IopCreateFile+0x37c
fffff880`08cb9d40 fffff802`8fae4453 : 00000000`0000039c fffff802`8ff030c6 fffff880`08cb9df8 00000000`00000000 : nt!NtCreateFile+0x79
fffff880`08cb9dd0 000007ff`0d9c313a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
000000d9`b3a4e578 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007ff`0d9c313a
FOLLOWUP_IP:
dfsc!DfscRmUnlinkReferral+95
fffff880`019f3e61 41bbfeff0000 mov r11d,0FFFEh
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: dfsc!DfscRmUnlinkReferral+95
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: dfsc
IMAGE_NAME: dfsc.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5010aaed
STACK_COMMAND: .cxr 0xfffff88008cb8870 ; kb
BUCKET_ID_FUNC_OFFSET: 95
FAILURE_BUCKET_ID: 0x3B_dfsc!DfscRmUnlinkReferral
BUCKET_ID: 0x3B_dfsc!DfscRmUnlinkReferral
Followup: MachineOwner

Last ditch effort to avoid BSOD due to nv4_disp.dll

Similar Messages

Maybe you are looking for